BioC 3.5: CHECK report for systemPipeR on toluca2

Package: systemPipeR

Version: 1.9.2

Command: /Library/Frameworks/R.framework/Versions/Current/Resources/bin/R CMD check --no-vignettes --timings systemPipeR_1.9.2.tar.gz

StartedAt: 2017-04-23 10:37:20 -0400 (Sun, 23 Apr 2017)

EndedAt: 2017-04-23 10:44:48 -0400 (Sun, 23 Apr 2017)

EllapsedTime: 448.3 seconds

RetCode: 0

Status:  OK

CheckDir: systemPipeR.Rcheck

Warnings: 0

##############################################################################
##############################################################################
###
### Running command:
###
###   /Library/Frameworks/R.framework/Versions/Current/Resources/bin/R CMD check --no-vignettes --timings systemPipeR_1.9.2.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/Users/biocbuild/bbs-3.5-bioc/meat/systemPipeR.Rcheck’
* using R Under development (unstable) (2017-02-15 r72187)
* using platform: x86_64-apple-darwin13.4.0 (64-bit)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘systemPipeR/DESCRIPTION’ ... OK
* checking extension type ... Package
* this is package ‘systemPipeR’ version ‘1.9.2’
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  inst/extdata/.BatchJobs.R
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘systemPipeR’ can be installed ... OK
* checking installed package size ... NOTE
  installed size is  5.6Mb
  sub-directories of 1Mb or more:
    doc       3.1Mb
    extdata   1.7Mb
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
Namespaces in Imports field not imported from:
  ‘BiocGenerics’ ‘VariantAnnotation’
  All declared Imports should be used.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
.AffyID2GeneID: no visible global function definition for ‘read.delim’
.readGOorg: no visible global function definition for ‘read.delim’
.readGOorg: no visible global function definition for ‘na.omit’
.resizeFeature: no visible global function definition for ‘DataFrame’
.sampleDFgene2GO: no visible global function definition for ‘na.omit’
.subsetReadsByMappingRegion: no visible global function definition for
  ‘IRanges’
.subsetReadsByMappingRegion: no visible global function definition for
  ‘seqlengths’
.subsetReadsByMappingRegion: no visible global function definition for
  ‘readGAlignments’
GOHyperGAll: no visible global function definition for ‘phyper’
GOHyperGAll_Simplify: no visible global function definition for
  ‘na.omit’
GOHyperGAll_Subset: no visible binding for global variable
  ‘test_sample’
clusterRun: no visible global function definition for ‘chunk’
combineVarReports: no visible global function definition for
  ‘read.delim’
countRangeset: no visible global function definition for ‘read.delim’
countRangeset: no visible global function definition for ‘import.bed’
countRangeset: no visible global function definition for
  ‘summarizeOverlaps’
countRangeset: no visible global function definition for ‘write.table’
featureCoverage: no visible global function definition for
  ‘readGAlignments’
featureCoverage: no visible global function definition for ‘qwidth’
featureCoverage: no visible global function definition for
  ‘subsetByOverlaps’
featureCoverage: no visible global function definition for ‘Rle’
featureCoverage: no visible global function definition for ‘na.omit’
featureCoverage: no visible global function definition for
  ‘write.table’
featuretypeCounts: no visible global function definition for
  ‘readGAlignments’
featuretypeCounts: no visible global function definition for
  ‘readGAlignmentPairs’
featuretypeCounts: no visible global function definition for
  ‘subsetByOverlaps’
featuretypeCounts: no visible global function definition for ‘qwidth’
featuretypeCounts: no visible global function definition for ‘last’
featuretypeCounts: no visible global function definition for ‘first’
filterDEGs: no visible binding for global variable ‘Comparisons’
filterDEGs: no visible binding for global variable ‘Counts’
filterDEGs: no visible binding for global variable ‘Type’
filterVars: no visible global function definition for ‘readVcf’
filterVars: no visible global function definition for ‘totalDepth<-’
filterVars: no visible global function definition for ‘refDepth<-’
filterVars: no visible global function definition for ‘altDepth<-’
filterVars: no visible global function definition for ‘asVCF’
filterVars: no visible global function definition for ‘writeVcf’
genFeatures: no visible global function definition for ‘DataFrame’
genFeatures: no visible global function definition for ‘seqlengths<-’
getQsubargs: no visible binding for global variable ‘tophatargs’
goBarplot: no visible binding for global variable ‘SampleMatch’
goBarplot: no visible binding for global variable ‘Sample’
olBarplot: no visible binding for global variable ‘Intersect_Sets’
olBarplot: no visible binding for global variable ‘Counts’
olBarplot: no visible binding for global variable ‘Level’
overLapper : <anonymous>: no visible global function definition for
  ‘combn’
plotfeatureCoverage: no visible global function definition for
  ‘aggregate’
plotfeatureCoverage: no visible binding for global variable ‘Coverage’
plotfeatureCoverage: no visible binding for global variable ‘Strand’
plotfeaturetypeCounts: no visible binding for global variable ‘Feature’
plotfeaturetypeCounts: no visible binding for global variable ‘Counts’
plotfeaturetypeCounts: no visible binding for global variable ‘Strand’
plotfeaturetypeCounts: no visible global function definition for
  ‘dev.off’
plotfeaturetypeCounts: no visible binding for global variable ‘Length’
predORF : .predORF: no visible global function definition for ‘na.omit’
predORF : .predORF: no visible global function definition for ‘IRanges’
readComp: no visible global function definition for ‘read.delim’
readComp: no visible global function definition for ‘combn’
runDiff: no visible global function definition for ‘read.delim’
runDiff: no visible global function definition for ‘write.table’
runDiff: no visible global function definition for ‘pdf’
runDiff: no visible global function definition for ‘dev.off’
run_edgeR: no visible global function definition for ‘model.matrix’
run_edgeR: no visible global function definition for ‘pdf’
run_edgeR: no visible global function definition for ‘dev.off’
scaleRanges : .scaleRanges: no visible global function definition for
  ‘IRanges’
scaleRanges: no visible global function definition for ‘DataFrame’
seeFastq : seeFastqSingle: no visible global function definition for
  ‘boxplot’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘Cycle’
seeFastqPlot : fastqPlot: no visible binding for global variable ‘low’
seeFastqPlot : fastqPlot: no visible binding for global variable ‘mid’
seeFastqPlot : fastqPlot: no visible binding for global variable ‘top’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘Frequency’
seeFastqPlot : fastqPlot: no visible binding for global variable ‘Base’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘Quality’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘RelDiv’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘Method’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘minQuality’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘Percent’
seeFastqPlot : fastqPlot: no visible binding for global variable
  ‘Outliers’
systemArgs: no visible global function definition for ‘read.delim’
varSummary: no visible global function definition for ‘read.delim’
variantReport: no visible global function definition for ‘readVcf’
variantReport: no visible global function definition for
  ‘locateVariants’
variantReport: no visible global function definition for ‘AllVariants’
variantReport: no visible global function definition for
  ‘predictCoding’
variantReport: no visible global function definition for ‘ref’
variantReport: no visible global function definition for ‘alt’
variantReport: no visible global function definition for ‘write.table’
vennPlot: no visible global function definition for ‘symbols’
vennPlot: no visible global function definition for ‘text’
vennPlot : plotellipse: no visible global function definition for
  ‘plot’
vennPlot : ellipseVenn: no visible global function definition for
  ‘split.screen’
vennPlot : ellipseVenn: no visible global function definition for
  ‘screen’
vennPlot : ellipseVenn: no visible global function definition for
  ‘text’
vennPlot : ellipseVenn: no visible global function definition for
  ‘close.screen’
writeTargetsRef: no visible global function definition for ‘read.delim’
show,INTERSECTset: no visible binding for global variable ‘vennset’
Undefined global functions or variables:
  AllVariants Base Comparisons Counts Coverage Cycle DataFrame Feature
  Frequency IRanges Intersect_Sets Length Level Method Outliers Percent
  Quality RelDiv Rle Sample SampleMatch Strand Type aggregate alt
  altDepth<- asVCF boxplot chunk close.screen combn dev.off first
  import.bed last locateVariants low mid minQuality model.matrix
  na.omit pdf phyper plot predictCoding qwidth read.delim
  readGAlignmentPairs readGAlignments readVcf ref refDepth<- screen
  seqlengths seqlengths<- split.screen subsetByOverlaps
  summarizeOverlaps symbols test_sample text top tophatargs
  totalDepth<- vennset write.table writeVcf
Consider adding
  importFrom("grDevices", "dev.off", "pdf")
  importFrom("graphics", "boxplot", "close.screen", "plot", "screen",
             "split.screen", "symbols", "text")
  importFrom("stats", "aggregate", "model.matrix", "na.omit", "phyper")
  importFrom("utils", "combn", "read.delim", "write.table")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in Makefiles ... OK
* checking for GNU extensions in Makefiles ... OK
* checking sizes of PDF files under ‘inst/doc’ ... OK
* checking installed files from ‘inst/doc’ ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU or elapsed time > 5s
              user system elapsed
genFeatures 17.243  0.418  26.705
run_DESeq2   6.330  0.032   8.792
filterDEGs   4.470  0.037   6.844
run_edgeR    3.765  0.043   5.410
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘runTests.R’
 OK
* checking for unstated dependencies in vignettes ... NOTE
'library' or 'require' call not declared from: ‘GenomicAlignments’
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 5 NOTEs
See
  ‘/Users/biocbuild/bbs-3.5-bioc/meat/systemPipeR.Rcheck/00check.log’
for details.

* installing *source* package ‘systemPipeR’ ...
** R
** inst
** preparing package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded
* DONE (systemPipeR)

name	user	system	elapsed
GOHyperGAll	0.002	0.001	0.004
INTERSECTset-class	0.014	0.004	0.021
SYSargs-class	0.048	0.004	0.059
VENNset-class	0.122	0.003	0.141
alignStats	0.330	0.039	0.418
catDB-class	0.001	0.000	0.002
catmap	0.001	0.000	0.001
clusterRun	0.019	0.003	0.026
countRangeset	0.150	0.008	0.182
featureCoverage	0.015	0.001	0.021
featuretypeCounts	0.013	0.001	0.015
filterDEGs	4.470	0.037	6.844
filterVars	0.018	0.002	0.030
genFeatures	17.243	0.418	26.705
getQsubargs	0.020	0.001	0.040
mergeBamByFactor	0.016	0.002	0.019
moduleload	0.001	0.000	0.001
olBarplot	2.847	0.022	4.280
overLapper	0.688	0.016	1.085
plotfeatureCoverage	0.015	0.001	0.038
plotfeaturetypeCounts	0.015	0.002	0.025
predORF	0.899	0.003	1.410
preprocessReads	0.028	0.002	0.038
qsubRun	0.019	0.002	0.028
readComp	0.024	0.002	0.027
returnRPKM	0.001	0.000	0.000
runCommandline	0.019	0.002	0.025
runDiff	0.050	0.001	0.054
run_DESeq2	6.330	0.032	8.792
run_edgeR	3.765	0.043	5.410
scaleRanges	0.176	0.001	0.207
seeFastq	0.000	0.000	0.001
symLink2bam	0.014	0.001	0.017
sysargs	0.019	0.002	0.026
systemArgs	0.020	0.002	0.024
variantReport	0.017	0.002	0.022
vennPlot	0.646	0.014	0.765
writeTargetsRef	0.002	0.001	0.002
writeTargetsout	0.014	0.001	0.016