|
| | mgTL2Polyline (const mgTL2parameter ¶) |
| |
| | mgTL2Polyline (const mgTL2Polyline &pline2) |
| |
| | mgTL2Polyline (const mgTL2parameter ¶, const MGCurve &uvline) |
| |
| | mgTL2Polyline (const MGLEPoint &pvE, const MGLEPoint &pvS) |
| |
| polyline_type | boundaryType () const |
| |
| double | angle2Uline (double t) const |
| |
| double | angle2Uline_at_i (int i) const |
| |
| mgTL2Polyline * | clone () const |
| |
| MGVector | direWorld (double t) const |
| |
| const MGVector & | direWorld_start () const |
| |
| const MGVector & | direWorld_end () const |
| |
| MGVector | direWorld_with_non_normalized (double t) const |
| |
| bool | get_id_from_VertexID (int idVertex, short id[3]) const |
| |
| bool | get_id (double t, short id[3]) const |
| |
| mgTL2Polyline & | limit (const MGInterval &i1) |
| | Limitting is done at the knot parameter for both start and end. [詳解]
|
| |
| void | negate () |
| | Change direction of the line. [詳解]
|
| |
| int | number_of_points () const |
| |
| std::ostream & | out (std::ostream &ostrm) const |
| | Debug Function. [詳解]
|
| |
| const mgTL2parameter & | TL2param () const |
| |
| MGPosition | uv (int i) const |
| |
| const MGPosition & | uv_start () const |
| |
| MGPosition | xyz (int i, bool need_normal) const |
| |
| void | set_type (polyline_type type) |
| |
| void | set_startID (const short start[3]) |
| |
| void | set_endID (const short end[3]) |
| |
| void | get_startID (short start[3]) |
| |
| void | get_endID (short end[3]) |
| |
| | MGLBRep () |
| | Default(dummy) constructor. [詳解]
|
| |
| | MGLBRep (int bdim, int order, int sdim) |
| | Dummy constructor that specifies area length. [詳解]
|
| |
| | MGLBRep (const MGKnotVector &t, const MGBPointSeq &bcoef) |
| |
| | MGLBRep (const MGBPointSeq &points, int order=4, bool circular=false) |
| |
| | MGLBRep (const MGNDDArray &tau, const MGBPointSeq &points, int order=4, double ratio=-1.) |
| |
| | MGLBRep (const MGNDDArray &tau, const MGBPointSeq &points, const MGKnotVector &t) |
| |
| | MGLBRep (const MGLBRepEndC &begin, const MGLBRepEndC &end, const MGNDDArray &tau, const MGBPointSeq &value) |
| |
| | MGLBRep (int order, const MGLBRepEndC &begin, const MGLBRepEndC &end, const MGNDDArray &tau, const MGBPointSeq &value) |
| |
| | MGLBRep (const MGLBRepEndC &begin, const MGLBRepEndC &end, const MGNDDArray &tau, const MGBPointSeq &value, const MGKnotVector &t) |
| |
| | MGLBRep (const MGLBRepEndC &begin, const MGLBRepEndC &end, const MGBPointSeq &points, const int *point_kind, const MGOscuCircle &circle) |
| |
| | MGLBRep (const MGCurve &crv, int order=0, int parameter_normalization=0, bool neglectMulti=false) |
| |
| | MGLBRep (const MGLBRep &old_brep, const MGKnotVector &t) |
| |
| | MGLBRep (const MGCurve &old_curve, const MGKnotVector &t) |
| |
| | MGLBRep (int coordinate1, const MGLBRep &brep1, int coordinate2, const MGLBRep &brep2) |
| |
| | MGLBRep (const MGNDDArray &tau, const MGBPointSeq &points, const double *weight, const MGKnotVector &t) |
| |
| | MGLBRep (const MGPPRep &pprep) |
| | Convert PP-Rep to B-rep. [詳解]
|
| |
| | MGLBRep (const MGPPRep &pprep, const MGKnotVector t) |
| |
| | MGLBRep (const MGLBRep &old_brep, const MGKnotArray &knots) |
| | Gets new B-Rep by adding knots to an original B-Rep. [詳解]
|
| |
| | MGLBRep (const MGLBRep &brep1, int continuity, int which, const MGLBRep &brep2) |
| |
| | MGLBRep (double t1, double t2, const MGLBRep &old_brep, int multiple=0) |
| |
| | MGLBRep (int id1, int id2, const MGLBRep &old_brep) |
| |
| | MGLBRep (int dim, const MGLBRep &lbrep, int start1=0, int start2=0) |
| |
| | ~MGLBRep () |
| |
| MGLBRep & | operator= (const MGGel &gel2) |
| |
| MGLBRep & | operator= (const MGLBRep &el2) |
| | Assignment. [詳解]
|
| |
| MGLBRep | operator+ (const MGVector &) const |
| | Transformation object construction. [詳解]
|
| |
| MGLBRep | operator- (const MGVector &) const |
| |
| MGLBRep | operator* (double) const |
| |
| MGLBRep | operator* (const MGMatrix &) const |
| |
| MGLBRep | operator* (const MGTransf &) const |
| |
| MGLBRep & | operator+= (const MGVector &v) |
| | Object transformation. [詳解]
|
| |
| MGLBRep & | operator-= (const MGVector &v) |
| |
| MGLBRep & | operator*= (double scale) |
| |
| MGLBRep & | operator*= (const MGMatrix &mat) |
| |
| MGLBRep & | operator*= (const MGTransf &tr) |
| |
| bool | operator== (const MGLBRep &gel2) const |
| | comparison [詳解]
|
| |
| bool | operator== (const MGGel &gel2) const |
| | Comparison. [詳解]
|
| |
| bool | operator< (const MGLBRep &gel2) const |
| |
| bool | operator< (const MGGel &gel2) const |
| |
| bool | operator== (const MGRLBRep &gel2) const |
| |
| void | approximate_as_LBRep (MGLBRep &lb, int ordr=0, int parameter_normalization=0, bool neglectMulti=false) const |
| |
| int | bdim () const |
| | Returns B-Rep Dimension. [詳解]
|
| |
| MGBox | box_limitted (const MGInterval &l) const |
| |
| const MGBox & | box_unlimit () const |
| | Return minimum box that includes the whole line. [詳解]
|
| |
| void | buildSRSmoothedLB_of_FreeEnd (const MGNDDArray &tau, const MGBPointSeq &y, const double *dy, double deviation, bool dev_is_sum=false) |
| |
| void | buildSRSmoothedLB_of_1stDeriv (const MGLBRepEndC &begin, const MGLBRepEndC &end, const MGNDDArray &tau, const MGBPointSeq &y, const double *dy, double deviation, bool dev_is_sum=false) |
| |
| MGLBRep & | change_dimension (int sdim, int start1=0, int start2=0) |
| | Changing this object's space dimension. [詳解]
|
| |
| void | change_range (double t1, double t2) |
| |
| MGLBRep & | change_order (int order) |
| |
| MGLBRep & | change_order_by_approximation (int ordr) |
| | Change order of the B-Rep by approximation. [詳解]
|
| |
| double & | coef (int i, int j) |
| |
| double | coef (int i, int j) const |
| |
| MGVector | coef (int i) const |
| | Extract (i,j)element for 0<=j<sdim(). [詳解]
|
| |
| const double * | coef_data (int i=0, int j=0) const |
| | Returns a pointer to the line b-coef data. [詳解]
|
| |
| double * | coef_data (int i=0, int j=0) |
| |
| void | connect (int continuity, int which, const MGLBRep &brep2) |
| |
| int | continuity (const MGLBRep &brep2, int &which, double &ratio) const |
| |
| MGLBRep & | coordinate_exchange (int j1, int j2) |
| |
| void | convert_to_Bezier (MGLBRep &bezier) const |
| |
| MGCurve * | copy_as_nurbs () const |
| |
| MGLBRep * | copy_as_LBRep () const |
| |
| MGLBRep * | copy_change_dimension (int sdim, int start1=0, int start2=0) const |
| |
| MGCurve * | copy_limitted (const MGInterval &prange) const |
| |
| double | curvilinear_integral (double t1, double t2) const |
| |
| int | divide_multi (MGPvector< MGCurve > &crv_list, int multiplicity=-1) const |
| |
| void | display_control_polygon (mgSysGL &sgl) const |
| | Display control polygons using mgVBO::MGDrawPointSeq() [詳解]
|
| |
| virtual void | drawSE (mgVBO &vbo, double span_length, double t0, double t1) const |
| | Draw this curve into vbo, approximating with polyline. [詳解]
|
| |
| MGVector | eval (double, int nderiv=0, int leftcon=0) const |
| |
| void | eval_all (double, MGPosition &, MGVector &, MGVector &) const |
| |
| void | eval_all (double tau, int nderiv, double *deriv, int leftcon=0) const |
| |
| void | eval_line (MGENDCOND begin, MGENDCOND end, const MGNDDArray &tau, MGBPointSeq &value) const |
| | Evaluate line data at data point seq.(BLELIN) [詳解]
|
| |
| void | eval_line (const MGNDDArray &tau, MGBPointSeq &value) const |
| | Evaluate line data at data point seq.(BLELIN) [詳解]
|
| |
| MGLBRep & | extend (int start, double length, double dk) |
| |
| void | extend (double length, bool start=false) |
| |
| MGLBRep & | extend_with_parameter (double tau, double dk) |
| | Extrapolate the curve by the parameter value. [詳解]
|
| |
| bool | get_control_points (MGBPointSeq &cpoints) const |
| |
| long | identify_type () const |
| | Return This object's typeID. [詳解]
|
| |
| const MGLBRep * | is_Bezier (int ordr=0) const |
| |
| bool | is_coplanar (const MGCurve &curve2, MGPlane &plane) const |
| |
| bool | is_planar (MGPlane &plane) const |
| |
| MGCCisect_list | isect (const MGCurve &curve2) const |
| |
| MGCCisect_list | isect (const MGStraight &curve2) const |
| |
| MGCCisect_list | isect (const MGRLBRep &curve2) const |
| |
| MGCCisect_list | isect (const MGEllipse &curve2) const |
| |
| MGCCisect_list | isect (const MGLBRep &curve2) const |
| |
| MGCCisect_list | isect (const MGSurfCurve &curve2) const |
| |
| MGCCisect_list | isect (const MGBSumCurve &curve2) const |
| |
| MGCSisect_list | isect (const MGSurface &surf) const |
| | Intersection of MGLBRep and Surface. [詳解]
|
| |
| MGCSisect_list | isect (const MGPlane &surf) const |
| |
| MGCSisect_list | isect (const MGSphere &surf) const |
| |
| MGCSisect_list | isect (const MGCylinder &surf) const |
| |
| MGCSisect_list | isect (const MGSBRep &surf) const |
| |
| MGCSisect_list | isect (const MGRSBRep &surf) const |
| |
| MGCSisect_list | isect (const MGBSumSurf &surf) const |
| |
| double & | knot (int i) |
| |
| double | knot (int i) const |
| |
| const double * | knot_data () const |
| |
| double * | knot_data () |
| |
| const MGKnotVector & | knot_vector () const |
| |
| MGKnotVector & | knot_vector () |
| |
| const MGBPointSeq & | line_bcoef () const |
| | Returns the B-coef's(RHS version). [詳解]
|
| |
| MGBPointSeq & | line_bcoef () |
| | Returns the B-coef's(LHS version). [詳解]
|
| |
| MGLBRep & | move (int move_kind, double move_point_param, const MGPosition &to_point, const double fix_point[2]) |
| |
| double | negate_param (double t) const |
| | Obtain parameter value if this curve is negated by "negate()". [詳解]
|
| |
| int | order () const |
| | Returns the order. [詳解]
|
| |
| double | param_e () const |
| | Return ending parameter value. [詳解]
|
| |
| double | param_s () const |
| | Return starting parameter value. [詳解]
|
| |
| double | param_normalize (double t) const |
| |
| MGCurve * | part (double t1, double t2, int multiple=0) const |
| |
| MGCParam_list | perps (const MGPosition &point) const |
| |
| MGPosition_list | perps (const MGCurve &crv2) const |
| |
| MGPosition_list | perps (const MGStraight &crv2) const |
| |
| MGPosition_list | perps (const MGRLBRep &crv2) const |
| |
| MGPosition_list | perps (const MGEllipse &crv2) const |
| |
| MGPosition_list | perps (const MGLBRep &crv2) const |
| |
| MGPosition_list | perps (const MGSurfCurve &crv2) const |
| |
| MGPosition_list | perps (const MGBSumCurve &crv2) const |
| |
| int | planar (MGPlane &plane, MGStraight &line, MGPosition &point) const |
| |
| int | project (const MGFSurface &surf, MGPvector< MGCurve > &vec_crv_uv, MGPvector< MGCurve > &vec_crv, const MGVector &vec) const |
| |
| int | project (const MGPlane &plane, MGPvector< MGCurve > &vec_crv_uv, MGPvector< MGCurve > &vec_crv, const MGVector &vec) const |
| |
| int | reduce (int ndec) |
| |
| MGLBRep & | refine (const MGKnotVector &t) |
| |
| void | remove_knot () |
| |
| void | remove_knot (int j, int snum) |
| |
| int | remove_knot_one (double line0, int nKnot, double &totalTol, int &num_knot, int sid=0, int snum=0) |
| |
| int | sdim () const |
| | Returns the space dimension. [詳解]
|
| |
| MGSurface * | sweep (const MGUnit_vector &uvec, double start_dist, double end_dist) const |
| |
| MGCURVE_TYPE | type () const |
| |
| void | updatePolarCoordinates2Ordinary () |
| |
| MGCurve & | unlimit () |
| | ｌｉｍｉｔをはずす。 [詳解]
|
| |
| MGCurve & | unlimit_end () |
| |
| MGCurve & | unlimit_start () |
| |
| int | out_to_IGES (MGIgesOfstream &igesfile, int SubordinateEntitySwitch=0) const |
| | IGES output function. PD126. [詳解]
|
| |
| std::string | whoami () const |
| |
| | MGCurve () |
| | Void constructor(初期化なしでオブジェクトを作成する。). [詳解]
|
| |
| | MGCurve (const MGCurve &curve) |
| | Copy constructor. [詳解]
|
| |
| virtual | ~MGCurve () |
| | Virtual Destructor. [詳解]
|
| |
| virtual MGCurve & | operator= (const MGCurve &gel2) |
| | Assignment. [詳解]
|
| |
| virtual bool | operator== (const MGCompositeCurve &crv) const |
| | Comparison. [詳解]
|
| |
| virtual bool | operator== (const MGTrimmedCurve &crv) const |
| |
| void | arrow (double t, MGPosition data[4]) const |
| | Generate arrow data of the tangent at the parameter value t of the curve. [詳解]
|
| |
| virtual MGPosition | center () const |
| | Obtain ceter coordinate of the geometry. [詳解]
|
| |
| virtual MGPosition | center_param () const |
| | Obtain ceter parameter value of the geometry. [詳解]
|
| |
| virtual double | closest (const MGPosition &point) const |
| | Compute the closest point parameter value of this curve from a point. [詳解]
|
| |
| virtual double | closest2D (const MGPosition &point) const |
| | Compute the nearest point from input point on this curve's (x,y) 2D part. [詳解]
|
| |
| virtual MGPosition | closest (const MGCurve &curve2) const |
| | Compute the closest point parameter value pair of this curve and curve2. [詳解]
|
| |
| bool | cn_continuity (int n) const |
| | Test if this curve is cn continuous. [詳解]
|
| |
| virtual int | common (const MGCurve &curve2, std::vector< double > &vecComSpan, MGCCisect_list &isect) const |
| | Test if this has a common line part with the 2nd curve. [詳解]
|
| |
| virtual int | common (const MGCurve &curve2, std::vector< double > &vecComSpan) const |
| | Test if this has a common line part with the 2nd curve. [詳解]
|
| |
| virtual double | curvature (double) const |
| | Return curvature at the given point. [詳解]
|
| |
| MGCurve * | curve () |
| | Return curve pointer if this MGGel is an MGCurve, else return null. [詳解]
|
| |
| const MGCurve * | curve () const |
| |
| virtual double | curvilinear_integral () const |
| |
| virtual double | deriv_length () const |
| | Compute mean length of 1st derivative vector. [詳解]
|
| |
| MGUnit_vector | direction (const MGPosition ¶m) const |
| | Compute direction unit vector of the geometry. [詳解]
|
| |
| virtual MGUnit_vector | direction (double) const |
| | Return tangent vector at the given point. [詳解]
|
| |
| virtual void | display_arrows (mgSysGL &sgl) const |
| |
| virtual void | display_break_points (mgSysGL &sgl) const |
| |
| virtual void | display_curvatures (mgSysGL &sgl, double scale, int density, bool use_radius) const |
| |
| int | divide_number () const |
| | get the a divide number for offset, intersection, or others. [詳解]
|
| |
| virtual void | drawWire (mgVBO &vbo, double span_length, int line_density=1) const |
| | Draw this curve into vbo, approximating with polyline. [詳解]
|
| |
| virtual MGPosition | end_point () const |
| | Return end point(終点を返却する) [詳解]
|
| |
| virtual MGVector | eval_deriv (double) const |
| | Compute 1st derivative. [詳解]
|
| |
| void | eval_discrete_deviation (const MGCurve &curve2, std::vector< MGPosition > &sts, int npoint=20, double tolerance=0.1) const |
| | Evaluate deviations of two curves(this and curve2) at npoint discrete points. [詳解]
|
| |
| virtual MGPosition | eval_position (double) const |
| | Compute positional data. [詳解]
|
| |
| MGVector | evaluate (const MGPosition &t, const int *nderiv=0) const |
| | Evaluate n'th derivative data. n=0 means positional data evaluation. [詳解]
|
| |
| virtual void | Frenet_frame2 (double t, MGVector &V2, MGVector &T, MGVector &N, MGVector &B) const |
| | Compute Frenet_frame, curvature and torsion in 3D space. [詳解]
|
| |
| virtual void | Frenet_frame (double t, MGUnit_vector &T, MGUnit_vector &N, MGUnit_vector &B, double &curvature, double &torsion) const |
| | Compute Frenet_frame, curvature and torsion in 3D space. [詳解]
|
| |
| double | get_average_tangent_length () const |
| | Get average tangent length. [詳解]
|
| |
| void | getParamsC0Continuity (std::vector< double > ¶m) const |
| |
| bool | has_same_direction_at (double s, const MGCurve &curve2, double t) const |
| | Test if this curve has the same direction with curve2. [詳解]
|
| |
| virtual bool | in_range (double t) const |
| | Test if input parameter value is inside parameter range of the line. [詳解]
|
| |
| bool | in_range (const MGPosition &t) const |
| | Test if input parameter value is inside parameter range of the line. [詳解]
|
| |
| MGCCisect_list | intersect_brute_force (const MGCurve &) const |
| | Curve to curve intersection. [詳解]
|
| |
| virtual MGCCisect_list | intersect (const MGCurve &) const |
| | Curve to curve intersection. [詳解]
|
| |
| MGisects | intersection (const MGObject &obj2) const |
| | Compute the intersections of two objects. [詳解]
|
| |
| MGisects | intersection (const MGCurve &obj2) const |
| |
| MGisects | intersection (const MGFSurface &obj2) const |
| |
| MGisects | intersection (const MGSurface &obj2) const |
| |
| MGisects | intersection (const MGFace &obj2) const |
| |
| MGisects | intersection (const MGShell &obj2) const |
| |
| MGCSisect_list | intersect_with_plane (const MGPlane &surf) const |
| | intersections with a plane. [詳解]
|
| |
| MGCCisect_list | isect (const MGTrimmedCurve &curve2) const |
| |
| MGCCisect_list | isect (const MGCompositeCurve &curve2) const |
| |
| MGCSisect_list | isect (const MGFSurface &fs) const |
| |
| virtual MGCSisect_list | isect (const MGFace &) const |
| |
| MGCFisect_vector | isect (const MGShell &shl) const |
| | Intersection of a shell and a curve. [詳解]
|
| |
| MGCParam_list | isect_1D (double f, int coordinate=0) const |
| | Compute intersection point of 1D sub curve of original curve. [詳解]
|
| |
| bool | is_closed () const |
| | Test if this is a closed curve. [詳解]
|
| |
| bool | is_closedWithError (double err) const |
| | Terst if this is a closed curve, given the tolerance. [詳解]
|
| |
| virtual bool | is_startpoint_parameter (double t) const |
| | Test if the input parameter t is the start point parameter or not. [詳解]
|
| |
| virtual bool | is_endpoint_parameter (double t) const |
| | Test if the input parameter t is the start point parameter or not. [詳解]
|
| |
| bool | is_perpendicular (const MGPosition &P, double t) const |
| | Test if the vector from P to this->eval(t) is perpendicular. [詳解]
|
| |
| virtual bool | is_linear (MGStraight &straight) const |
| | Test if this cure is linear or not, that is, is straight or not. [詳解]
|
| |
| MGKnotVector & | knot_vector () |
| | Returns the knot vector of the curve. [詳解]
|
| |
| virtual double | length (double t1, double t2) const |
| | Cmpute curve length of the interval. [詳解]
|
| |
| virtual double | length () const |
| | Compute whole curve length. [詳解]
|
| |
| virtual double | length_param (double t, double len) const |
| | Inverse function of length. [詳解]
|
| |
| MGCurve & | limit (double t0, double t1) |
| |
| int | manifold_dimension () const |
| | Return manifold dimension, 0:point, 1:curve, 2:surface. [詳解]
|
| |
| void | negate_transform (MGGeometry &boundary) const |
| |
| virtual MGPvector< MGCurve > | offset (double ofs_value, const MGVector &norm_vector=mgNULL_VEC) const |
| | Offset of costant deviation from this curve. [詳解]
|
| |
| virtual MGPvector< MGCurve > | offset (const MGLBRep &ofs_value_lb, const MGVector &norm_vector=mgNULL_VEC) const |
| | Offset of variable deviation from this curve. [詳解]
|
| |
| virtual MGLBRep | offset_c2 (double ofs_value, const MGVector &norm_vector=mgNULL_VEC) const |
| | Costant offset curve of C2 continuous curve. [詳解]
|
| |
| virtual MGLBRep | offset_c2 (const MGLBRep &ofs_value_lb, const MGVector &norm_vector=mgNULL_VEC) const |
| | Valuable offset curve of C2 continuous curve. [詳解]
|
| |
| virtual bool | on (const MGPosition &point, double &t) const |
| | Test if given point is on the curve or not. [詳解]
|
| |
| bool | on (const MGPosition &P, MGPosition &t) const |
| | Test if given point is on this geometry or not. [詳解]
|
| |
| virtual double | param (const MGPosition &) const |
| | Compute parameter value of given point. [詳解]
|
| |
| virtual double | param_error () const |
| | Obtain parameter space error. [詳解]
|
| |
| virtual MGInterval | param_range () const |
| | Return parameter range of the curve(パラメータ範囲を返す). [詳解]
|
| |
| double | param_round_into_range (double t) const |
| | Round the parameter t into this parameter range. [詳解]
|
| |
| MGBox | parameter_range () const |
| | Return parameter range of the geometry(パラメータ範囲を返す). [詳解]
|
| |
| double | param_se (double t) const |
| | Return starting or ending parameter value that is nearer to the param t. [詳解]
|
| |
| virtual double | param_span () const |
| | Compute parameter span length. [詳解]
|
| |
| virtual int | perp_guess (double t0, double t1, const MGPosition &P, double tg, double &t) const |
| | Return perpendicular point from a point P. [詳解]
|
| |
| virtual int | perp_guess (double s0, double s1, const MGCurve &curve2, double t0, double t1, double sg, double tg, MGPosition &st) const |
| | Return perpendicular points of two curves. [詳解]
|
| |
| virtual int | perp_point (const MGPosition &p, double &t, const double *g=0) const |
| | Compute a foot point of the perpendicular line from point p to the curve. [詳解]
|
| |
| MGPosition_list | perpendiculars (const MGCurve &crv) const |
| | Compute all the perpendicular points of this curve and the second one. [詳解]
|
| |
| MGPosition_list | perps (const MGCompositeCurve &crv2) const |
| |
| MGPosition_list | perps (const MGTrimmedCurve &crv2) const |
| |
| virtual MGPosition | pick_closest (const MGStraight &sl) const |
| | Compute the parameter value of the closest point from the straight to this object. [詳解]
|
| |
| virtual void | polygonize (double error, MGLBRep &lb2) const |
| | Approximate this curve by a polyline and output to lb2. [詳解]
|
| |
| virtual double | range (double t) const |
| | Round t into curve's parameter range. [詳解]
|
| |
| MGPosition | range (const MGPosition &t) const |
| | Round t into geometry's parameter range. [詳解]
|
| |
| std::auto_ptr< MGCurve > | rebuild (int how_rebuild=1, int parameter_normalization=2, double tol=-1., int ordr=0, const double *param_range=0) const |
| | Rebuild this curve. [詳解]
|
| |
| virtual MGCurve & | rotate_self (const MGVector &v, double, const MGPosition &=mgORIGIN) |
| | Update curve by rotating around straight line. [詳解]
|
| |
| std::auto_ptr< MGLBRep > | scalePolar (double angleBase, double angle1, double angle2) const |
| | Obtain polar-rotated curve of this. [詳解]
|
| |
| virtual MGPosition | start_point () const |
| | Return start point(始点を返却する). [詳解]
|
| |
| virtual int | tangent_guess (double t0, double t1, const MGPosition &P, double tg, double &t) const |
| | Return tangent point from a point P, given guess starting paramter tg. [詳解]
|
| |
| void | trim_end (double t) |
| | Trim the end part of this curve at the parameter t. [詳解]
|
| |
| void | trim_start (double t) |
| | Trim the start part of this curve at the parameter t. [詳解]
|
| |
| void | trim_start_and_end (double ts, double te) |
| | Trim the start part and end part of this curve at the parameter ts and te. [詳解]
|
| |
| virtual std::auto_ptr< MGLBRep > | PolarCoordinatesLBRep () const |
| | Obtain polar coordinates system MGLBRep of this curve. [詳解]
|
| |
| | MGGeometry () |
| | Void constructor(初期化なしでオブジェクトを作成する。) [詳解]
|
| |
| | MGGeometry (const MGGeometry &geo2) |
| | Copy constructor. [詳解]
|
| |
| virtual | ~MGGeometry () |
| | Virtual Destructor. [詳解]
|
| |
| virtual MGGeometry & | operator= (const MGGeometry &gel2) |
| |
| virtual MGGeometry * | geometry () |
| | Return MGGeometry pointer if this MGGel is an MGGeometry, else return null. [詳解]
|
| |
| virtual const MGGeometry * | geometry () const |
| |
| const MGBox & | box () const |
| | Return minimum box that includes whole of the geometry. [詳解]
|
| |
| virtual void | draw3DVertex (mgVBO &vbo) const |
| |
| bool | is_null () const |
| | Test if this is null. [詳解]
|
| |
| double | parameter_error () const |
| | Error allowed in the parameter space of the geometry. [詳解]
|
| |
| | MGObject () |
| | Void constructor(初期化なしでオブジェクトを作成する。) [詳解]
|
| |
| | MGObject (const MGObject &obj2) |
| | Copy constructor. [詳解]
|
| |
| virtual | ~MGObject () |
| | Virtual Destructor. [詳解]
|
| |
| virtual MGObject & | operator= (const MGObject &obj2) |
| |
| MGAppearance * | appearance () |
| |
| const MGAppearance * | appearance () const |
| |
| virtual void | shade (mgVBO &vbo, const MGDrawParam ¶, mgVBO::ELEMENT_TARGET target=mgVBO::SHADING) const |
| | Shade the object in world coordinates. [詳解]
|
| |
| MGAppearance * | ensure_appearance () |
| |
| virtual void | make_display_list (MGCL::VIEWMODE vmode=MGCL::DONTCARE) const |
| | Make a display list of this gel. [詳解]
|
| |
| bool | has_common (const MGObject &obj2) const |
| |
| const MGObject * | includes_object () const |
| | Test if this gel includes an object. [詳解]
|
| |
| MGObject * | includes_object () |
| | Test if this gel includes an object. [詳解]
|
| |
| virtual MGisects | intersection (const MGPoint &obj2) const |
| |
| void | remove_appearance () |
| | Remove the MGAppearance of this MGAttribedGel. [詳解]
|
| |
| virtual MGObject * | object () |
| | Return MGObject pointer if this MGGel is an MGObject, else return null. [詳解]
|
| |
| virtual const MGObject * | object () const |
| |
| virtual const MGFSurface * | fsurface () const |
| | Get the MGFSurface pointer if this is MGSurface or MGFace. [詳解]
|
| |
| virtual MGFSurface * | fsurface () |
| |
| void | set_appearance (const MGAppearance &appr2) |
| |
| virtual void | transform (const MGVector &v) |
| | Transform the gel by the argument. [詳解]
|
| |
| virtual void | transform (double scale) |
| | translation [詳解]
|
| |
| virtual void | transform (const MGMatrix &mat) |
| | scaling. [詳解]
|
| |
| virtual void | transform (const MGTransf &tr) |
| | matrix transformation. [詳解]
|
| |
| | MGAttribedGel () |
| | void constructor. [詳解]
|
| |
| | MGAttribedGel (const MGAttribedGel &gel2) |
| | copy constructor. [詳解]
|
| |
| virtual MGAttribedGel & | operator= (const MGAttribedGel &gel2) |
| |
| virtual | ~MGAttribedGel () |
| |
| void | copy_appearance (const MGAttribedGel &gel2) |
| |
| mgVBO * | dlist_name () const |
| |
| virtual bool | displayList_is_made (MGCL::VIEWMODE vmode) const |
| | Judge if the display list for vmode is made or not. [詳解]
|
| |
| void | deleteDlistName () const |
| |
| virtual void | drawAttrib (mgVBO &vbo, bool no_color=false) const |
| | Process of draw or render attributes. [詳解]
|
| |
| virtual void | render_attribute () const |
| |
| virtual int | get_draw_attrib_mask () const |
| | Obtain attribute mask for glPushAttrib(). [詳解]
|
| |
| virtual int | get_render_attrib_mask () const |
| |
| int | getVBOElementsNumber () const |
| | Get the number of elements of m_dlistName. [詳解]
|
| |
| int | getVBOShaderElementsNumber () const |
| | Get the number of shading elements of m_dlistName. [詳解]
|
| |
| virtual bool | no_display () const |
| |
| void | remove_GLattrib (long tid) |
| | Removed the attribute of specified type. [詳解]
|
| |
| virtual void | set_GLattrib (MGGLAttrib *attr) |
| |
| virtual void | set_display () |
| | Set this group as display or no display group. [詳解]
|
| |
| virtual void | set_no_display () |
| |
| bool | visible () const |
| |
| void | set_name (const MGName &newName) |
| |
| const MGName * | get_name () const |
| |
| void | set_color (const MGColor &newColor) |
| |
| const MGColor * | get_color () const |
| |
| void | setDlistName (mgVBO *vbo=0) const |
| |
| void | setDirty (bool is_dirty) const |
| | Set dirty flag(s) of this VBO(m_dlistName). [詳解]
|
| |
| virtual | ~MGGel () |
| | Virtual Destructor. [詳解]
|
| |
| virtual bool | operator!= (const MGGel &gel2) const |
| |
| virtual bool | operator> (const MGGel &gel2) const |
| |
| virtual MGAttrib * | attrib () |
| | Return MGAttrib pointer if this MGGel is an MGAttrib, else return null. [詳解]
|
| |
| virtual const MGAttrib * | attrib () const |
| |
| virtual MGGroup * | group () |
| | Return MGGroup pointer if this MGGel is an MGGroup, else return null. [詳解]
|
| |
| virtual const MGGroup * | group () const |
| |
| virtual MGPoint * | point () |
| | Return point pointer if this MGGel is an MGPoint, else return null. [詳解]
|
| |
| virtual const MGPoint * | point () const |
| |
| virtual MGSurface * | surf () |
| | Return MGSurface pointer if this MGGel is an MGSurface, else return null. [詳解]
|
| |
| virtual const MGSurface * | surf () const |
| |
| virtual MGTopology * | topology () |
| | Return MGTopology pointer if this MGGel is an MGTopology, else return null. [詳解]
|
| |
| virtual const MGTopology * | topology () const |
| |
| virtual MGFace * | face () |
| | Return MGFace pointer if this MGGel is an MGFace, else return null. [詳解]
|
| |
| virtual const MGFace * | face () const |
| |
| virtual MGShell * | shell () |
| | Return MGShell pointer if this MGGel is an MGShell, else return null. [詳解]
|
| |
| virtual const MGShell * | shell () const |
| |
| std::string | string_content () const |
| |
| bool | type_is (const MGAbstractGels &types) const |
| |
基底クラス MGLBRep に属する継承公開メンバ関数
1.8.8 
