libcryptsetup12-2.7.0-150600.3.3.1 < > , @ fh&p9|yf0,ᲈjsNTtj7 Ŋ4_g4 ]r&UyGB?!u;?W&# -b314DfRqM+w$Y-r])!U9`^wڇ9 Wd$Yŀ?u(cP5$ Рaj+pr% P? Y ń4&S!2
ץ (ҩ¬-#D ) ̏L Ǿ(.rhq4@Yl (cbz嶺:WH > C H ? 8 d % c ( > O y
@ H | # # # ( 8 $ + 9 + :
+ > I @ X B g F | G H I X Y Z [ \ ] ^ = b I c d w e | f l u v w , x 4 y < ' z 4 C libcryptsetup12 2.7.0 150600.3.3.1 Library for setting up dm-crypt Based Encrypted Block Devices cryptsetup is used to conveniently set up dm-crypt based device-mapper
targets. It allows to set up targets to read cryptoloop compatible
volumes as well as LUKS formatted ones. The package additionally
includes support for automatically setting up encrypted volumes at boot
time via the config file /etc/crypttab. fh&h01-ch3d SUSE Linux Enterprise 15 SUSE LLC LGPL-2.0-or-later AND SUSE-GPL-2.0-with-openssl-exception https://www.suse.com/ System/Libraries https://gitlab.com/cryptsetup/cryptsetup/ linux x86_64 fhfh 0bfd8c7aaad71c2a6cc54e34b3d22e46c1df62a24bfa3646ca1d974460595588 libcryptsetup.so.12.10.0 root root root root cryptsetup-2.7.0-150600.3.3.1.src.rpm libcryptsetup.so.12()(64bit) libcryptsetup.so.12(CRYPTSETUP_2.0)(64bit) libcryptsetup.so.12(CRYPTSETUP_2.4)(64bit) libcryptsetup.so.12(CRYPTSETUP_2.5)(64bit) libcryptsetup.so.12(CRYPTSETUP_2.6)(64bit) libcryptsetup.so.12(CRYPTSETUP_2.7)(64bit) libcryptsetup12 libcryptsetup12(x86-64) libcryptsetup12-hmac @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @
/sbin/ldconfig /sbin/ldconfig libargon2.so.1()(64bit) libblkid.so.1()(64bit) libblkid.so.1(BLKID_2.15)(64bit) libblkid.so.1(BLKID_2.17)(64bit) libblkid.so.1(BLKID_2.21)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.25)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.38)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libc.so.6(GLIBC_2.8)(64bit) libcrypto.so.3()(64bit) libcrypto.so.3(OPENSSL_3.0.0)(64bit) libdevmapper.so.1.03()(64bit) libdevmapper.so.1.03(Base)(64bit) libdevmapper.so.1.03(DM_1_02_97)(64bit) libdevmapper.so.1.03(DM_1_02_98)(64bit) libjson-c.so.5()(64bit) libjson-c.so.5(JSONC_0.14)(64bit) libuuid.so.1()(64bit) libuuid.so.1(UUID_1.0)(64bit) rpmlib(CompressedFileNames) rpmlib(FileDigests) rpmlib(PayloadFilesHavePrefix) rpmlib(PayloadIsXz) 3.0.4-1 4.6.0-1 4.0-1 5.2-1 4.14.3 fѴ@e@d@ddcc@cc pcoaea@@aC1a&0a /a@a@`ݮ@`L@`KW_j__R,@^ϧ^^9\]W\f\f[G[G[{Zp^@Z64 bytes)
passphrases - Split translations to -lang package
- New version to 2.3.1
* Support VeraCrypt 128 bytes passwords.
VeraCrypt now allows passwords of maximal length 128 bytes
(compared to legacy TrueCrypt where it was limited by 64 bytes).
* Strip extra newline from BitLocker recovery keys
There might be a trailing newline added by the text editor when
the recovery passphrase was passed using the --key-file option.
* Detect separate libiconv library.
It should fix compilation issues on distributions with iconv
implemented in a separate library.
* Various fixes and workarounds to build on old Linux distributions.
* Split lines with hexadecimal digest printing for large key-sizes.
* Do not wipe the device with no integrity profile.
With --integrity none we performed useless full device wipe.
* Workaround for dm-integrity kernel table bug.
Some kernels show an invalid dm-integrity mapping table
if superblock contains the "recalculate" bit. This causes
integritysetup to not recognize the dm-integrity device.
Integritysetup now specifies kernel options such a way that
even on unpatched kernels mapping table is correct.
* Print error message if LUKS1 keyslot cannot be processed.
If the crypto backend is missing support for hash algorithms
used in PBKDF2, the error message was not visible.
* Properly align LUKS2 keyslots area on conversion.
If the LUKS1 payload offset (data offset) is not aligned
to 4 KiB boundary, new LUKS2 keyslots area in now aligned properly.
* Validate LUKS2 earlier on conversion to not corrupt the device
if binary keyslots areas metadata are not correct. - Update to 2.3.0 (include release notes for 2.2.0)
* BITLK (Windows BitLocker compatible) device access
* Veritysetup now supports activation with additional PKCS7 signature
of root hash through --root-hash-signature option.
* Integritysetup now calculates hash integrity size according to algorithm
instead of requiring an explicit tag size.
* Integritysetup now supports fixed padding for dm-integrity devices.
* A lot of fixes to online LUKS2 reecryption.
* Add crypt_resume_by_volume_key() function to libcryptsetup.
If a user has a volume key available, the LUKS device can be resumed
directly using the provided volume key.
No keyslot derivation is needed, only the key digest is checked.
* Implement active device suspend info.
Add CRYPT_ACTIVATE_SUSPENDED bit to crypt_get_active_device() flags
that informs the caller that device is suspended (luksSuspend).
* Allow --test-passphrase for a detached header.
Before this fix, we required a data device specified on the command
line even though it was not necessary for the passphrase check.
* Allow --key-file option in legacy offline encryption.
The option was ignored for LUKS1 encryption initialization.
* Export memory safe functions.
To make developing of some extensions simpler, we now export
functions to handle memory with proper wipe on deallocation.
* Fail crypt_keyslot_get_pbkdf for inactive LUKS1 keyslot.
* Add optional global serialization lock for memory hard PBKDF.
* Abort conversion to LUKS1 with incompatible sector size that is
not supported in LUKS1.
* Report error (-ENOENT) if no LUKS keyslots are available. User can now
distinguish between a wrong passphrase and no keyslot available.
* Fix a possible segfault in detached header handling (double free).
* Add integritysetup support for bitmap mode introduced in Linux kernel 5.2.
* The libcryptsetup now keeps all file descriptors to underlying device
open during the whole lifetime of crypt device context to avoid excessive
scanning in udev (udev run scan on every descriptor close).
* The luksDump command now prints more info for reencryption keyslot
(when a device is in-reencryption).
* New --device-size parameter is supported for LUKS2 reencryption.
* New --resume-only parameter is supported for LUKS2 reencryption.
* The repair command now tries LUKS2 reencryption recovery if needed.
* If reencryption device is a file image, an interactive dialog now
asks if reencryption should be run safely in offline mode
(if autodetection of active devices failed).
* Fix activation through a token where dm-crypt volume key was not
set through keyring (but using old device-mapper table parameter mode).
* Online reencryption can now retain all keyslots (if all passphrases
are provided). Note that keyslot numbers will change in this case.
* Allow volume key file to be used if no LUKS2 keyslots are present.
* Print a warning if online reencrypt is called over LUKS1 (not supported).
* Fix TCRYPT KDF failure in FIPS mode.
* Remove FIPS mode restriction for crypt_volume_key_get.
* Reduce keyslots area size in luksFormat when the header device is too small.
* Make resize action accept --device-size parameter (supports units suffix). - Create a weak dependency cycle between libcryptsetup and
libcryptsetup-hmac to make sure they are installed together
(bsc#1090768) - Use noun phrase in summary. - New version 2.1.0
* The default size of the LUKS2 header is increased to 16 MB.
It includes metadata and the area used for binary keyslots;
it means that LUKS header backup is now 16MB in size.
* Cryptsetup now doubles LUKS default key size if XTS mode is used
(XTS mode uses two internal keys). This does not apply if key size
is explicitly specified on the command line and it does not apply
for the plain mode.
This fixes a confusion with AES and 256bit key in XTS mode where
code used AES128 and not AES256 as often expected.
* Default cryptographic backend used for LUKS header processing is now
OpenSSL. For years, OpenSSL provided better performance for PBKDF.
* The Python bindings are no longer supported and the code was removed
from cryptsetup distribution. Please use the libblockdev project
that already covers most of the libcryptsetup functionality
including LUKS2.
* Cryptsetup now allows using --offset option also for luksFormat.
* Cryptsetup now supports new refresh action (that is the alias for
"open --refresh").
* Integritysetup now supports mode with detached data device through
new --data-device option.
- 2.1.0 would use LUKS2 as default, we stay with LUKS1 for now until
someone has time to evaluate the fallout from switching to LUKS2. - Suggest hmac package (boo#1090768)
- remove old upgrade hack for upgrades from 12.1
- New version 2.0.5
Changes since version 2.0.4
~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Wipe full header areas (including unused) during LUKS format.
Since this version, the whole area up to the data offset is zeroed,
and subsequently, all keyslots areas are wiped with random data.
This ensures that no remaining old data remains in the LUKS header
areas, but it could slow down format operation on some devices.
Previously only first 4k (or 32k for LUKS2) and the used keyslot
was overwritten in the format operation.
* Several fixes to error messages that were unintentionally replaced
in previous versions with a silent exit code.
More descriptive error messages were added, including error
messages if
- a device is unusable (not a block device, no access, etc.),
- a LUKS device is not detected,
- LUKS header load code detects unsupported version,
- a keyslot decryption fails (also happens in the cipher check),
- converting an inactive keyslot.
* Device activation fails if data area overlaps with LUKS header.
* Code now uses explicit_bzero to wipe memory if available
(instead of own implementation).
* Additional VeraCrypt modes are now supported, including Camellia
and Kuznyechik symmetric ciphers (and cipher chains) and Streebog
hash function. These were introduced in a recent VeraCrypt upstream.
Note that Kuznyechik requires out-of-tree kernel module and
Streebog hash function is available only with the gcrypt cryptographic
backend for now.
* Fixes static build for integritysetup if the pwquality library is used.
* Allows passphrase change for unbound keyslots.
* Fixes removed keyslot number in verbose message for luksKillSlot,
luksRemoveKey and erase command.
* Adds blkid scan when attempting to open a plain device and warn the user
about existing device signatures in a ciphertext device.
* Remove LUKS header signature if luksFormat fails to add the first keyslot.
* Remove O_SYNC from device open and use fsync() to speed up
wipe operation considerably.
* Create --master-key-file in luksDump and fail if the file already exists.
* Fixes a bug when LUKS2 authenticated encryption with a detached header
wiped the header device instead of dm-integrity data device area (causing
unnecessary LUKS2 header auto recovery). - make parallell installable version for SLE12 - New version 2.0.4
Changes since version 2.0.3
~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Use the libblkid (blockid) library to detect foreign signatures
on a device before LUKS format and LUKS2 auto-recovery.
This change fixes an unexpected recovery using the secondary
LUKS2 header after a device was already overwritten with
another format (filesystem or LVM physical volume).
LUKS2 will not recreate a primary header if it detects a valid
foreign signature. In this situation, a user must always
use cryptsetup repair command for the recovery.
Note that libcryptsetup and utilities are now linked to libblkid
as a new dependence.
To compile code without blockid support (strongly discouraged),
use --disable-blkid configure switch.
* Add prompt for format and repair actions in cryptsetup and
integritysetup if foreign signatures are detected on the device
through the blockid library.
After the confirmation, all known signatures are then wiped as
part of the format or repair procedure.
* Print consistent verbose message about keyslot and token numbers.
For keyslot actions: Key slot unlocked/created/removed.
For token actions: Token created/removed.
* Print error, if a non-existent token is tried to be removed.
* Add support for LUKS2 token definition export and import.
The token command now can export/import customized token JSON file
directly from command line. See the man page for more details.
* Add support for new dm-integrity superblock version 2.
* Add an error message when nothing was read from a key file.
* Update cryptsetup man pages, including --type option usage.
* Add a snapshot of LUKS2 format specification to documentation
and accordingly fix supported secondary header offsets.
* Add bundled optimized Argon2 SSE (X86_64 platform) code.
If the bundled Argon2 code is used and the new configure switch
- -enable-internal-sse-argon2 option is present, and compiler flags
support required optimization, the code will try to use optimized
and faster variant.
Always use the shared library (--enable-libargon2) if possible.
This option was added because an enterprise distribution
rejected to support the shared Argon2 library and native support
in generic cryptographic libraries is not ready yet.
* Fix compilation with crypto backend for LibreSSL >= 2.7.0.
LibreSSL introduced OpenSSL 1.1.x API functions, so compatibility
wrapper must be commented out.
* Fix on-disk header size calculation for LUKS2 format if a specific
data alignment is requested. Until now, the code used default size
that could be wrong for converted devices.
Changes since version 2.0.2
~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Expose interface to unbound LUKS2 keyslots.
Unbound LUKS2 keyslot allows storing a key material that is independent
of master volume key (it is not bound to encrypted data segment).
* New API extensions for unbound keyslots (LUKS2 only)
crypt_keyslot_get_key_size() and crypt_volume_key_get()
These functions allow to get key and key size for unbound keyslots.
* New enum value CRYPT_SLOT_UNBOUND for keyslot status (LUKS2 only).
* Add --unbound keyslot option to the cryptsetup luksAddKey command.
* Add crypt_get_active_integrity_failures() call to get integrity
failure count for dm-integrity devices.
* Add crypt_get_pbkdf_default() function to get per-type PBKDF default
setting.
* Add new flag to crypt_keyslot_add_by_key() to force update device
volume key. This call is mainly intended for a wrapped key change.
* Allow volume key store in a file with cryptsetup.
The --dump-master-key together with --master-key-file allows cryptsetup
to store the binary volume key to a file instead of standard output.
* Add support detached header for cryptsetup-reencrypt command.
* Fix VeraCrypt PIM handling - use proper iterations count formula
for PBKDF2-SHA512 and PBKDF2-Whirlpool used in system volumes.
* Fix cryptsetup tcryptDump for VeraCrypt PIM (support --veracrypt-pim).
* Add --with-default-luks-format configure time option.
(Option to override default LUKS format version.)
* Fix LUKS version conversion for detached (and trimmed) LUKS headers.
* Add luksConvertKey cryptsetup command that converts specific keyslot
from one PBKDF to another.
* Do not allow conversion to LUKS2 if LUKSMETA (external tool metadata)
header is detected.
* More cleanup and hardening of LUKS2 keyslot specific validation options.
Add more checks for cipher validity before writing metadata on-disk.
* Do not allow LUKS1 version downconversion if the header contains tokens.
* Add "paes" family ciphers (AES wrapped key scheme for mainframes)
to allowed ciphers.
Specific wrapped ley configuration logic must be done by 3rd party tool,
LUKS2 stores only keyslot material and allow activation of the device.
* Add support for --check-at-most-once option (kernel 4.17) to veritysetup.
This flag can be dangerous; if you can control underlying device
(you can change its content after it was verified) it will no longer
prevent reading tampered data and also it does not prevent silent
data corruptions that appear after the block was once read.
* Fix return code (EPERM instead of EINVAL) and retry count for bad
passphrase on non-tty input.
* Enable support for FEC decoding in veritysetup to check dm-verity devices
with additional Reed-Solomon code in userspace (verify command).
Changes since version 2.0.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Fix a regression in early detection of inactive keyslot for luksKillSlot.
It tried to ask for passphrase even for already erased keyslot.
* Fix a regression in loopaesOpen processing for keyfile on standard input.
Use of "-" argument was not working properly.
* Add LUKS2 specific options for cryptsetup-reencrypt.
Tokens and persistent flags are now transferred during reencryption;
change of PBKDF keyslot parameters is now supported and allows
to set precalculated values (no benchmarks).
* Do not allow LUKS2 --persistent and --test-passphrase cryptsetup flags
combination. Persistent flags are now stored only if the device was
successfully activated with the specified flags.
* Fix integritysetup format after recent Linux kernel changes that
requires to setup key for HMAC in all cases.
Previously integritysetup allowed HMAC with zero key that behaves
like a plain hash.
* Fix VeraCrypt PIM handling that modified internal iteration counts
even for subsequent activations. The PIM count is no longer printed
in debug log as it is sensitive information.
Also, the code now skips legacy TrueCrypt algorithms if a PIM
is specified (they cannot be used with PIM anyway).
* PBKDF values cannot be set (even with force parameters) below
hardcoded minimums. For PBKDF2 is it 1000 iterations, for Argon2
it is 4 iterations and 32 KiB of memory cost.
* Introduce new crypt_token_is_assigned() API function for reporting
the binding between token and keyslots.
* Allow crypt_token_json_set() API function to create internal token types.
Do not allow unknown fields in internal token objects.
* Print message in cryptsetup that about was aborted if a user did not
answer YES in a query. - update to 2.0.1:
* To store volume key into kernel keyring, kernel 4.15 with
dm-crypt 1.18.1 is required
* Increase maximum allowed PBKDF memory-cost limit to 4 GiB
* Use /run/cryptsetup as default for cryptsetup locking dir
* Introduce new 64-bit byte-offset *keyfile_device_offset functions.
* New set of fucntions that allows 64-bit offsets even on 32bit systems
are now availeble:
- crypt_resume_by_keyfile_device_offset
- crypt_keyslot_add_by_keyfile_device_offset
- crypt_activate_by_keyfile_device_offset
- crypt_keyfile_device_read
The new functions have added the _device_ in name.
Old functions are just internal wrappers around these.
* Also cryptsetup --keyfile-offset and --new-keyfile-offset now
allows 64-bit offsets as parameters.
* Add error hint for wrongly formatted cipher strings in LUKS1 and
properly fail in luksFormat if cipher format is missing required IV. - Update to version 2.0.0:
* Add support for new on-disk LUKS2 format
* Enable to use system libargon2 instead of bundled version
* Install tmpfiles.d configuration for LUKS2 locking directory
* New command integritysetup: support for the new dm-integrity kernel target
* Support for larger sector sizes for crypt devices
* Miscellaneous fixes and improvements - Update to version 1.7.5:
* Fixes to luksFormat to properly support recent kernel running
in FIPS mode (bsc#1031998).
* Fixes accesses to unaligned hidden legacy TrueCrypt header.
* Fixes to optional dracut ramdisk scripts for offline
re-encryption on initial boot. - Update to version 1.7.4:
* Allow to specify LUKS1 hash algorithm in Python luksFormat
wrapper.
* Use LUKS1 compiled-in defaults also in Python wrapper.
* OpenSSL backend: Fix OpenSSL 1.1.0 support without backward
compatible API.
* OpenSSL backend: Fix LibreSSL compatibility.
* Check for data device and hash device area overlap in
veritysetup.
* Fix a possible race while allocating a free loop device.
* Fix possible file descriptor leaks if libcryptsetup is run from
a forked process.
* Fix missing same_cpu_crypt flag in status command.
* Various updates to FAQ and man pages.
- Changes for version 1.7.3:
* Fix device access to hash offsets located beyond the 2GB device
boundary in veritysetup.
* Set configured (compile-time) default iteration time for
devices created directly through libcryptsetup
* Fix PBKDF2 benchmark to not double iteration count for specific
corner case.
* Verify passphrase in cryptsetup-reencrypt when encrypting a new
drive.
* OpenSSL backend: fix memory leak if hash context was repeatedly
reused.
* OpenSSL backend: add support for OpenSSL 1.1.0.
* Fix several minor spelling errors.
* Properly check maximal buffer size when parsing UUID from
/dev/disk/. - Update to version 1.7.2:
* Update LUKS documentation format.
Clarify fixed sector size and keyslots alignment.
* Support activation options for error handling modes in
Linux kernel dm-verity module:
- -ignore-corruption - dm-verity just logs detected corruption
- -restart-on-corruption - dm-verity restarts the kernel if
corruption is detected
If the options above are not specified, default behavior for
dm-verity remains. Default is that I/O operation fails with
I/O error if corrupted block is detected.
- -ignore-zero-blocks - Instructs dm-verity to not verify
blocks that are expected to contain zeroes and always
return zeroes directly instead.
NOTE that these options could have security or functional
impacts, do not use them without assessing the risks!
* Fix help text for cipher benchmark specification
(mention --cipher option).
* Fix off-by-one error in maximum keyfile size.
Allow keyfiles up to compiled-in default and not that value
minus one.
* Support resume of interrupted decryption in cryptsetup-reencrypt
utility. To resume decryption, LUKS device UUID (--uuid option)
option must be used.
* Do not use direct-io for LUKS header with unaligned keyslots.
Such headers were used only by the first cryptsetup-luks-1.0.0
release (2005).
* Fix device block size detection to properly work on particular
file-based containers over underlying devices with 4k sectors.
- Update to version 1.7.1:
* Code now uses kernel crypto API backend according to new
changes introduced in mainline kernel
While mainline kernel should contain backward compatible
changes, some stable series kernels do not contain fully
backported compatibility patches.
Without these patches most of cryptsetup operations
(like unlocking device) fail.
This change in cryptsetup ensures that all operations using
kernel crypto API works even on these kernels.
* The cryptsetup-reencrypt utility now properly detects removal
of underlying link to block device and does not remove
ongoing re-encryption log.
This allows proper recovery (resume) of reencrypt operation later.
NOTE: Never use /dev/disk/by-uuid/ path for reencryption utility,
this link disappears once the device metadata is temporarily
removed from device.
* Cryptsetup now allows special "-" (standard input) keyfile handling
even for TCRYPT (TrueCrypt and VeraCrypt compatible) devices.
* Cryptsetup now fails if there are more keyfiles specified
for non-TCRYPT device.
* The luksKillSlot command now does not suppress provided password
in batch mode (if password is wrong slot is not destroyed).
Note that not providing password in batch mode means that keyslot
is destroyed unconditionally. - update to 1.7.0:
* The cryptsetup 1.7 release changes defaults for LUKS,
there are no API changes.
* Default hash function is now SHA256 (used in key derivation
function and anti-forensic splitter).
* Default iteration time for PBKDF2 is now 2 seconds.
* Fix PBKDF2 iteration benchmark for longer key sizes.
* Remove experimental warning for reencrypt tool.
* Add optional libpasswdqc support for new LUKS passwords.
* Update FAQ document. - Fix missing dependency on coreutils for initrd macros (boo#958562)
- Call missing initrd macro at postun (boo#958562) - Update to 1.6.8
* If the null cipher (no encryption) is used, allow only empty
password for LUKS. (Previously cryptsetup accepted any password
in this case.)
The null cipher can be used only for testing and it is used
temporarily during offline encrypting not yet encrypted device
(cryptsetup-reencrypt tool).
Accepting only empty password prevents situation when someone
adds another LUKS device using the same UUID (UUID of existing
LUKS device) with faked header containing null cipher.
This could force user to use different LUKS device (with no
encryption) without noticing.
(IOW it prevents situation when attacker intentionally forces
user to boot into different system just by LUKS header
manipulation.)
Properly configured systems should have an additional integrity
protection in place here (LUKS here provides only
confidentiality) but it is better to not allow this situation
in the first place.
(For more info see QubesOS Security Bulletin QSB-019-2015.)
* Properly support stdin "-" handling for luksAddKey for both new
and old keyfile parameters.
* If encrypted device is file-backed (it uses underlying loop
device), cryptsetup resize will try to resize underlying loop
device as well. (It can be used to grow up file-backed device
in one step.)
* Cryptsetup now allows to use empty password through stdin pipe.
(Intended only for testing in scripts.) - Enable verbose build log. - regenerate the initrd if cryptsetup tool changes
(wanted by 90crypt dracut module) - Update to 1.6.7
* Cryptsetup TCRYPT mode now supports VeraCrypt devices
(TrueCrypt extension)
* Support keyfile-offset and keyfile-size options even for plain
volumes.
* Support keyfile option for luksAddKey if the master key is
specified.
* For historic reasons, hashing in the plain mode is not used if
keyfile is specified (with exception of --key-file=-). Print
a warning if these parameters are ignored.
* Support permanent device decryption for cryptsetup-reencrypt.
To remove LUKS encryption from a device, you can now use
- -decrypt option.
* Allow to use --header option in all LUKS commands. The
- -header always takes precedence over positional device argument.
* Allow luksSuspend without need to specify a detached header.
* Detect if O_DIRECT is usable on a device allocation. There are
some strange storage stack configurations which wrongly allows
to open devices with direct-io but fails on all IO operations later.
* Add low-level performance options tuning for dmcrypt (for
Linux 4.0 and later).
* Get rid of libfipscheck library.
(Note that this option was used only for Red Hat and derived
distributions.) With recent FIPS changes we do not need to
link to this FIPS monster anymore. Also drop some no longer
needed FIPS mode checks.
* Many fixes and clarifications to man pages.
* Prevent compiler to optimize-out zeroing of buffers for on-stack
variables.
* Fix a crash if non-GNU strerror_r is used. /sbin/ldconfig /sbin/ldconfig libcryptsetup12-hmac h01-ch3d 1725261862 2.7.0-150600.3.3.1 2.7.0-150600.3.3.1 2.7.0 2.7.0 libcryptsetup.so.12 libcryptsetup.so.12.10.0 /usr/lib64/ -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g obs://build.suse.de/SUSE:Maintenance:35433/SUSE_SLE-15-SP6_Update/5f8c1318954e33d789e9da31b80cf2ff-cryptsetup.SUSE_SLE-15-SP6_Update drpm xz 5 x86_64-suse-linux ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=991f16fd56feb3eed95374341c448a13ab68e06f, stripped 'P P P P P P P P P P R R R R R R R R
R R R R R R R R R
R R R R R R R R R R R R \vFrj utf-8 d1f11ffd7e9ac9fcaf3fa74c88da3bf5da66e6f7f7f56b50f556eafd797451c7 ? 7zXZ
! t/)^] "k%{- JF|l> ٧盗N̑oP܍TDg3inN>m]H8o
c
-Ny?HP8+ a_[ \{T30OPyFJB a Jc! mӍ2c#f:E,^XK!F;Q
{2E
FOS_~v^"#:Xabh\EL ï%U ut
ŵ˻n| 5|j.owҞ S'{g'bcDjl@$4;CQW&*@Y
5#DJz e<% s VO. 3cWI;
fB,Yq3QlC WƤ.?j4$j?Avfds֕9M9$ B
#{quI% /R'u'<$%Z]x `aUx>pyf:CgRb6ҽOkon#o_=ŀ7Bc?&ݠpiVr4>X0W\ *5 ?-CDY#
.Ft\j)F${bB` ֘4Rֈb]-v us]2a3e~A 1՜<
Ic\ myt4D2s~fr
=G Di; ꉇM#?;¸sŶ
_*W
TK?[sƜL ]oe,u6 ݬL r*ɥk H!`W\c^u_vo ͨ?
ԙlK>f|n!jVAD@[\WCЮ= FDeFrHKLqr' ] c枬6
D/hk%uqԨ7.(r=( e 05 &y/;50ߐB/V&ۉhv P^f#_~AA'bB] vRyKJ: M}V~m
BݚPBKJ ?Dj'eo}[;g6?I&+ %dIF謯T4g䨤 k #3%/cӍQMOT$;?:MIԵ^ړg7EX~˃k.2}Gׁw;x
G ̌"V
o}`x-0#s0X#|qk Ϥ=
|=ha]dmRRׇӏsqL}viRיr@H>Fb@Xi}e{:Qd7SfϘe8nʪ-UK= "c֛kG } ~]$.Xb]PVؘ5exY^'av
}pyu1QBVG\w $.s:+op+ 5'kTia09 Tw(3|]ؒ&Qwu#źqVksVH6[Zt{)z ?]"UCN\BQͩ ɥ8SRl[j dzBD˙ 2 sIDH]N"ڢbhe%1CZaX)?bZ9'OSmF Էs930v 1_ug!,ߊ
8{!ȍzZqYϝIcXC `xRD5^;W#@F(7ʝ+!k@5"Kf668!4 X| #k)6
/kro?Ѧܼ dzY6,cLiK$qݸqc3$s~Ky$9&[!"w`dЗ^ѰHR@kbb>ZۼzAfh烸rY VV aBq9*e! efp4IM884[p˩x 0 |-?s HO\"478 [3ׄ0u4g_m-#mhUUE
#},u?Ta*>&%ںq~k>,Giw vyHjH=&4oJ
@Wvp۔/ҥ0j־l *gZ(rcjF3$b7gGRhQݹK?:(o!%E. If˝G,
T6 g=r~'~ 2
@ )
)r[N. =oAhRdtm4aE 5m03X9x04
#~,sbuM46DLwDr(\ꉑZEG, t@E+м:S|)ӔIHҞ;б1Xݕw}͛pFX
~ z9^6rIJJe(2mce%?NZ}1C?eUɉ}
r{2ޮ$u )9}3(Ƃa 9a
`M .,r5JiP9ݷ(^v8p lE p Q' Ը)АyOB._Gk,`<L
[3)cWmx.bz,ti|%^ӮELE&BN5 O!f֊KROcѹmp_c~cs*ݔM F!@5̊rW~81hʀux{vHhưFA[C5rdyqTyZ.`4?|Sv%z%.-Ǵ؛r7_}ʱ~U}<_݄~뫈 6xˮCs{'{2OHF@0 sKA4uUϙ[Ad:NI.@GG4;$TpNuiSPjt:-Lf1'Y˕.aKFa
sS\q+ `4BoX#n`b 9s"v< à_iOW%B5)- X\h
GXj &k\
TߓWYqJuV~0nzD ӹ`{(B%Bp|~=3!ίG[1i#dO80`*]pܵ2u.ɸ3 8 #iu #k \UI?u4*=R7 P|5
S4DYj+b+k3]#?
j >ReT37gΆK\ˤF/+aԝ "0雀E8W06hhu-gن
I& Н:=_b#\2A _B,OzPd{H>y\^zfpfD+ _')Iʆ$/ بe˿i5۾&j : /kW| ٫6 z++'}:Cr %j0_ #~|":IOIQAZu sx ['CT\;3&s9q(F/ƛF "P3LK_Y.
}Gۃ ܻs?
Z k+Vp#wIG͈Oc-@2|W|plvFⳮi?\ǚM&2d \B09 {t!ñ{_!Dz?c$U[DH')>qQ%2TW=*D^:|*lxIC=vv0;~a||raF#U-8uf2\SJĵxx(t;L'tvA $w@h:X$i#1D!#QR rֻƐ驘Y6ҝ#m;nN\ a8|G{o)n)Y-PR! W4馿Y:^m؈%RXD~L`fZhOQ;єXи`5zq$[ 9ʬ~Q׃Sr)1،w0eqֽzHK`HaktF)yL
! `hF3T 09f.f7@ c5AY:k53#V҃ot,. WAG Śo^HT kMPKÀ/gop*;6߁+a0 ѷZCT:GV:OQ%~gĦpvn8hͲ(ڄpJ5Kz.*[ʛ0YSnf~|0Iiz ~ zK0O3JS BSjs e}4R) _gzx&$S}Kݎ&
ĐNO=ѩ"8Zg*;PfL
5PI&:0+X9Wɵ#MH7\)0;JV .sd3RZ樝 (6MbF͓*خBQi$Y
:6!u;ӻ~
""lч3L$L|.aRoJęY([Jc% Sc6d lzdJǕs9FKXbCndM' mԶ)뻇]kĢ״K*4bV.
RGl ,㾨6^ HPac dW >r8ּ|s, E'=3 X g ƸU^ 3#Nux/DDq{KՒ>!p ;ajH8|-at Gif aS @ k5o-E$ 5\q|mwNҧ[JpJ'n: 5k|Bnm`;
jI>QDP|lPdbdT[-"] SmfK0M l#Rs8,Ir{,Ml7f6O-cBڣpZ8¬O;cd3oG @=_?ɷ
n v+ˬ/A$iAyt0_NL
ۮ~ 2.G%VuBbwVT=U< Yf)l 39Xqy>MpH=
\
*>A$f !:5kvhCVkwQlPrnu|Rv~ydٮkQ^+6 ?HP]x:B?~f Ѹ_\OuUƈPX+"#KVŝY: y(~ȼF}4y++(Q
~[:pk k$N6ퟅ uSU`9`o3 2ě ;~nd!M:=؍ҫ:a;psڊVZU*i@TF1g<Te dw :֨AuF7E2ho)~=bՙ*tTK|þW uV>jNOSXƊ|]xPpYG n 5R }G
YZ