commit 1ded0ef2419e8f83a17d65594523ec3aeb2e3d0f Author: Greg Kroah-Hartman Date: Wed Aug 31 17:16:52 2022 +0200 Linux 5.15.64 Link: https://lore.kernel.org/r/20220829105804.609007228@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Tested-by: Bagas Sanjaya Tested-by: Ron Economos Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 4f672112f8665102a5842c170be1713f8ff95919 Author: Daniel Borkmann Date: Thu Aug 25 23:26:47 2022 +0200 bpf: Don't use tnum_range on array range checking for poke descriptors commit a657182a5c5150cdfacb6640aad1d2712571a409 upstream. Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check. Fixes: d2e4c1e6c294 ("bpf: Constant map key tracking for prog array pokes") Reported-by: Hsin-Wei Hung Signed-off-by: Daniel Borkmann Cc: Shung-Hsi Yu Acked-by: John Fastabend Link: https://lore.kernel.org/r/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.net Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit cd2a50d0a097a42b6de283377da98ff757505120 Author: Saurabh Sengar Date: Thu Aug 4 08:55:34 2022 -0700 scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq commit d957e7ffb2c72410bcc1a514153a46719255a5da upstream. storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it doesn't need to make forward progress under memory pressure. Marking this workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following warning: [ 14.506347] ------------[ cut here ]------------ [ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn [ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130 [ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu [ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun [ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130 <-snip-> [ 14.506408] Call Trace: [ 14.506412] __flush_work+0xf1/0x1c0 [ 14.506414] __cancel_work_timer+0x12f/0x1b0 [ 14.506417] ? kernfs_put+0xf0/0x190 [ 14.506418] cancel_delayed_work_sync+0x13/0x20 [ 14.506420] disk_block_events+0x78/0x80 [ 14.506421] del_gendisk+0x3d/0x2f0 [ 14.506423] sr_remove+0x28/0x70 [ 14.506427] device_release_driver_internal+0xef/0x1c0 [ 14.506428] device_release_driver+0x12/0x20 [ 14.506429] bus_remove_device+0xe1/0x150 [ 14.506431] device_del+0x167/0x380 [ 14.506432] __scsi_remove_device+0x11d/0x150 [ 14.506433] scsi_remove_device+0x26/0x40 [ 14.506434] storvsc_remove_lun+0x40/0x60 [ 14.506436] process_one_work+0x209/0x400 [ 14.506437] worker_thread+0x34/0x400 [ 14.506439] kthread+0x121/0x140 [ 14.506440] ? process_one_work+0x400/0x400 [ 14.506441] ? kthread_park+0x90/0x90 [ 14.506443] ret_from_fork+0x35/0x40 [ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]--- Link: https://lore.kernel.org/r/1659628534-17539-1-git-send-email-ssengar@linux.microsoft.com Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun") Reviewed-by: Michael Kelley Signed-off-by: Saurabh Sengar Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 2c72bead9bc6f57a2277103cf86c9b1b57cd7747 Author: Kiwoong Kim Date: Tue Aug 2 10:42:31 2022 +0900 scsi: ufs: core: Enable link lost interrupt commit 6d17a112e9a63ff6a5edffd1676b99e0ffbcd269 upstream. Link lost is treated as fatal error with commit c99b9b230149 ("scsi: ufs: Treat link loss as fatal error"), but the event isn't registered as interrupt source. Enable it. Link: https://lore.kernel.org/r/1659404551-160958-1-git-send-email-kwmad.kim@samsung.com Fixes: c99b9b230149 ("scsi: ufs: Treat link loss as fatal error") Reviewed-by: Bart Van Assche Signed-off-by: Kiwoong Kim Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit da86f80da31a1f8289b3d0bbb98050a6a7b68d20 Author: Ian Rogers Date: Mon Aug 22 14:33:51 2022 -0700 perf stat: Clear evsel->reset_group for each stat run commit bf515f024e4c0ca46a1b08c4f31860c01781d8a5 upstream. If a weak group is broken then the reset_group flag remains set for the next run. Having reset_group set means the counter isn't created and ultimately a segfault. A simple reproduction of this is: # perf stat -r2 -e '{cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles}:W which will be added as a test in the next patch. Fixes: 4804e0111662d7d8 ("perf stat: Use affinity for opening events") Reviewed-by: Andi Kleen Signed-off-by: Ian Rogers Tested-by: Arnaldo Carvalho de Melo Tested-by: Xing Zhengjun Cc: Alexander Shishkin Cc: Andi Kleen Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: https://lore.kernel.org/r/20220822213352.75721-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit b5f5fee03d178ae254eb5ca5aa5a74e0d42be383 Author: Stephane Eranian Date: Wed Aug 17 22:46:13 2022 -0700 perf/x86/intel/ds: Fix precise store latency handling commit d4bdb0bebc5ba3299d74f123c782d99cd4e25c49 upstream. With the existing code in store_latency_data(), the memory operation (mem_op) returned to the user is always OP_LOAD where in fact, it should be OP_STORE. This comes from the fact that the function is simply grabbing the information from a data source map which covers only load accesses. Intel 12th gen CPU offers precise store sampling that captures both the data source and latency. Therefore it can use the data source mapping table but must override the memory operation to reflect stores instead of loads. Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids") Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20220818054613.1548130-1-eranian@google.com Signed-off-by: Greg Kroah-Hartman commit 83bd6d121245c88b7576b1f5c7e4175cc98e2904 Author: Stephane Eranian Date: Wed Aug 3 09:00:31 2022 -0700 perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU commit 11745ecfe8fea4b4a4c322967a7605d2ecbd5080 upstream. Existing code was generating bogus counts for the SNB IMC bandwidth counters: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000327813 1,024.03 MiB uncore_imc/data_reads/ 1.000327813 20.73 MiB uncore_imc/data_writes/ 2.000580153 261,120.00 MiB uncore_imc/data_reads/ 2.000580153 23.28 MiB uncore_imc/data_writes/ The problem was introduced by commit: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Where the read_counter callback was replace to point to the generic uncore_mmio_read_counter() function. The SNB IMC counters are freerunnig 32-bit counters laid out contiguously in MMIO. But uncore_mmio_read_counter() is using a readq() call to read from MMIO therefore reading 64-bit from MMIO. Although this is okay for the uncore_perf_event_update() function because it is shifting the value based on the actual counter width to compute a delta, it is not okay for the uncore_pmu_event_start() which is simply reading the counter and therefore priming the event->prev_count with a bogus value which is responsible for causing bogus deltas in the perf stat command above. The fix is to reintroduce the custom callback for read_counter for the SNB IMC PMU and use readl() instead of readq(). With the change the output of perf stat is back to normal: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000120987 296.94 MiB uncore_imc/data_reads/ 1.000120987 138.42 MiB uncore_imc/data_writes/ 2.000403144 175.91 MiB uncore_imc/data_reads/ 2.000403144 68.50 MiB uncore_imc/data_writes/ Fixes: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Kan Liang Link: https://lore.kernel.org/r/20220803160031.1379788-1-eranian@google.com Signed-off-by: Greg Kroah-Hartman commit a38e7ab467405fd1c0d043acd92cb1c130e1567c Author: James Clark Date: Thu Jul 28 10:39:46 2022 +0100 perf python: Fix build when PYTHON_CONFIG is user supplied commit bc9e7fe313d5e56d4d5f34bcc04d1165f94f86fb upstream. The previous change to Python autodetection had a small mistake where the auto value was used to determine the Python binary, rather than the user supplied value. The Python binary is only used for one part of the build process, rather than the final linking, so it was producing correct builds in most scenarios, especially when the auto detected value matched what the user wanted, or the system only had a valid set of Pythons. Change it so that the Python binary path is derived from either the PYTHON_CONFIG value or PYTHON value, depending on what is specified by the user. This was the original intention. This error was spotted in a build failure an odd cross compilation environment after commit 4c41cb46a732fe82 ("perf python: Prefer python3") was merged. Fixes: 630af16eee495f58 ("perf tools: Use Python devtools for version autodetection rather than runtime") Signed-off-by: James Clark Acked-by: Ian Rogers Cc: Alexander Shishkin Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220728093946.1337642-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 77864ed6c6ce2187ffbcdb4216278b89e333c640 Author: Yu Kuai Date: Tue Jul 26 20:22:24 2022 +0800 blk-mq: fix io hung due to missing commit_rqs commit 65fac0d54f374625b43a9d6ad1f2c212bd41f518 upstream. Currently, in virtio_scsi, if 'bd->last' is not set to true while dispatching request, such io will stay in driver's queue, and driver will wait for block layer to dispatch more rqs. However, if block layer failed to dispatch more rq, it should trigger commit_rqs to inform driver. There is a problem in blk_mq_try_issue_list_directly() that commit_rqs won't be called: // assume that queue_depth is set to 1, list contains two rq blk_mq_try_issue_list_directly blk_mq_request_issue_directly // dispatch first rq // last is false __blk_mq_try_issue_directly blk_mq_get_dispatch_budget // succeed to get first budget __blk_mq_issue_directly scsi_queue_rq cmd->flags |= SCMD_LAST virtscsi_queuecommand kick = (sc->flags & SCMD_LAST) != 0 // kick is false, first rq won't issue to disk queued++ blk_mq_request_issue_directly // dispatch second rq __blk_mq_try_issue_directly blk_mq_get_dispatch_budget // failed to get second budget ret == BLK_STS_RESOURCE blk_mq_request_bypass_insert // errors is still 0 if (!list_empty(list) || errors && ...) // won't pass, commit_rqs won't be called In this situation, first rq relied on second rq to dispatch, while second rq relied on first rq to complete, thus they will both hung. Fix the problem by also treat 'BLK_STS_*RESOURCE' as 'errors' since it means that request is not queued successfully. Same problem exists in blk_mq_dispatch_rq_list(), 'BLK_STS_*RESOURCE' can't be treated as 'errors' here, fix the problem by calling commit_rqs if queue_rq return 'BLK_STS_*RESOURCE'. Fixes: d666ba98f849 ("blk-mq: add mq_ops->commit_rqs()") Signed-off-by: Yu Kuai Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20220726122224.1790882-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 4428d15cddd509bb9d3408c4a35af8237e7403c3 Author: Salvatore Bonaccorso Date: Mon Aug 1 11:15:30 2022 +0200 Documentation/ABI: Mention retbleed vulnerability info file for sysfs commit 00da0cb385d05a89226e150a102eb49d8abb0359 upstream. While reporting for the AMD retbleed vulnerability was added in 6b80b59b3555 ("x86/bugs: Report AMD retbleed vulnerability") the new sysfs file was not mentioned so far in the ABI documentation for sysfs-devices-system-cpu. Fix that. Fixes: 6b80b59b3555 ("x86/bugs: Report AMD retbleed vulnerability") Signed-off-by: Salvatore Bonaccorso Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/r/20220801091529.325327-1-carnil@debian.org Signed-off-by: Greg Kroah-Hartman commit 992d2fc2fe7fcc8d13db79818cdb826ba0b28182 Author: Peter Zijlstra Date: Fri Aug 19 13:01:35 2022 +0200 x86/nospec: Fix i386 RSB stuffing commit 332924973725e8cdcc783c175f68cf7e162cb9e5 upstream. Turns out that i386 doesn't unconditionally have LFENCE, as such the loop in __FILL_RETURN_BUFFER isn't actually speculation safe on such chips. Fixes: ba6e31af2be9 ("x86/speculation: Add LFENCE to RSB fill sequence") Reported-by: Ben Hutchings Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/Yv9tj9vbQ9nNlXoY@worktop.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman commit 577d9c05cc48c5242bcf719c06a5baf3105473ad Author: Liam Howlett Date: Wed Aug 10 16:02:25 2022 +0000 binder_alloc: add missing mmap_lock calls when using the VMA commit 44e602b4e52f70f04620bbbf4fe46ecb40170bde upstream. Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages() and when checking for a VMA in binder_alloc_new_buf_locked(). It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock after it verifies a VMA exists, but may be taken again deeper in the call stack, if necessary. Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA) Signed-off-by: Liam R. Howlett Reported-by: Ondrej Mosnacek Reported-by: Acked-by: Carlos Llamas Tested-by: Ondrej Mosnacek Cc: Minchan Kim Cc: Christian Brauner (Microsoft) Cc: Greg Kroah-Hartman Cc: Hridya Valsaraju Cc: Joel Fernandes Cc: Martijn Coenen Cc: Suren Baghdasaryan Cc: Todd Kjos Cc: Matthew Wilcox (Oracle) Cc: "Arve Hjønnevåg" Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 1ed630bc530ae107d32c41156b836ee95651e33c Author: Zenghui Yu Date: Tue Aug 9 12:38:48 2022 +0800 arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76 commit 5e1e087457c94ad7fafbe1cf6f774c6999ee29d4 upstream. Since commit 51f559d66527 ("arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs"), we failed to detect erratum 1286807 on Cortex-A76 because its entry in arm64_repeat_tlbi_list[] was accidently corrupted by this commit. Fix this issue by creating a separate entry for Kryo4xx Gold. Fixes: 51f559d66527 ("arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs") Cc: Shreyas K K Signed-off-by: Zenghui Yu Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20220809043848.969-1-yuzenghui@huawei.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit af61a8f7603926c26158153d0a0755764d82657c Author: Yonglong Li Date: Thu Mar 17 15:09:53 2022 -0700 mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skb commit 3ef3905aa3b5b3e222ee6eb0210bfd999417a8cc upstream. Got crash when doing pressure test of mptcp: =========================================================================== dst_release: dst:ffffa06ce6e5c058 refcnt:-1 kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffa06ce6e5c058 PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063 Oops: 0011 [#1] SMP PTI CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014 Call Trace: ? skb_release_head_state+0x68/0x100 ? skb_release_all+0xe/0x30 ? kfree_skb+0x32/0xa0 ? mptcp_sendmsg_frag+0x57e/0x750 ? __mptcp_retrans+0x21b/0x3c0 ? __switch_to_asm+0x35/0x70 ? mptcp_worker+0x25e/0x320 ? process_one_work+0x1a7/0x360 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ? ret_from_fork+0x35/0x40 =========================================================================== In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will be initialized, in under memory pressure situation sk_wmem_schedule will return false and then kfree_skb. In this case skb->_skb_refdst is not null because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and kfree_skb will try to release dst and cause crash. Fixes: f70cad1085d1 ("mptcp: stop relying on tcp_tx_skb_cache") Reviewed-by: Paolo Abeni Signed-off-by: Yonglong Li Signed-off-by: Mat Martineau Link: https://lore.kernel.org/r/20220317220953.426024-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 661c01b2181d9413c799127f13143583b69f20fd Author: Guoqing Jiang Date: Wed Aug 17 20:05:14 2022 +0800 md: call __md_stop_writes in md_stop commit 0dd84b319352bb8ba64752d4e45396d8b13e6018 upstream. From the link [1], we can see raid1d was running even after the path raid_dtr -> md_stop -> __md_stop. Let's stop write first in destructor to align with normal md-raid to fix the KASAN issue. [1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop") Reported-by: Mikulas Patocka Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman commit ee0c613bfe83ebd8476d29facc96480d7b7e1c60 Author: Guoqing Jiang Date: Wed Aug 17 20:05:13 2022 +0800 Revert "md-raid: destroy the bitmap after destroying the thread" commit 1d258758cf06a0734482989911d184dd5837ed4e upstream. This reverts commit e151db8ecfb019b7da31d076130a794574c89f6f. Because it obviously breaks clustered raid as noticed by Neil though it fixed KASAN issue for dm-raid, let's revert it and fix KASAN issue in next commit. [1]. https://lore.kernel.org/linux-raid/a6657e08-b6a7-358b-2d2a-0ac37d49d23a@linux.dev/T/#m95ac225cab7409f66c295772483d091084a6d470 Fixes: e151db8ecfb0 ("md-raid: destroy the bitmap after destroying the thread") Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman commit 0038f85933250b8d00650665c2a8439965b4675a Author: David Hildenbrand Date: Thu Aug 11 12:34:34 2022 +0200 mm/hugetlb: fix hugetlb not supporting softdirty tracking commit f96f7a40874d7c746680c0b9f57cef2262ae551f upstream. Patch series "mm/hugetlb: fix write-fault handling for shared mappings", v2. I observed that hugetlb does not support/expect write-faults in shared mappings that would have to map the R/O-mapped page writable -- and I found two case where we could currently get such faults and would erroneously map an anon page into a shared mapping. Reproducers part of the patches. I propose to backport both fixes to stable trees. The first fix needs a small adjustment. This patch (of 2): Staring at hugetlb_wp(), one might wonder where all the logic for shared mappings is when stumbling over a write-protected page in a shared mapping. In fact, there is none, and so far we thought we could get away with that because e.g., mprotect() should always do the right thing and map all pages directly writable. Looks like we were wrong: -------------------------------------------------------------------------- #include #include #include #include #include #include #include #define HUGETLB_SIZE (2 * 1024 * 1024u) static void clear_softdirty(void) { int fd = open("/proc/self/clear_refs", O_WRONLY); const char *ctrl = "4"; int ret; if (fd < 0) { fprintf(stderr, "open(clear_refs) failed\n"); exit(1); } ret = write(fd, ctrl, strlen(ctrl)); if (ret != strlen(ctrl)) { fprintf(stderr, "write(clear_refs) failed\n"); exit(1); } close(fd); } int main(int argc, char **argv) { char *map; int fd; fd = open("/dev/hugepages/tmp", O_RDWR | O_CREAT); if (!fd) { fprintf(stderr, "open() failed\n"); return -errno; } if (ftruncate(fd, HUGETLB_SIZE)) { fprintf(stderr, "ftruncate() failed\n"); return -errno; } map = mmap(NULL, HUGETLB_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); if (map == MAP_FAILED) { fprintf(stderr, "mmap() failed\n"); return -errno; } *map = 0; if (mprotect(map, HUGETLB_SIZE, PROT_READ)) { fprintf(stderr, "mmprotect() failed\n"); return -errno; } clear_softdirty(); if (mprotect(map, HUGETLB_SIZE, PROT_READ|PROT_WRITE)) { fprintf(stderr, "mmprotect() failed\n"); return -errno; } *map = 0; return 0; } -------------------------------------------------------------------------- Above test fails with SIGBUS when there is only a single free hugetlb page. # echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages # ./test Bus error (core dumped) And worse, with sufficient free hugetlb pages it will map an anonymous page into a shared mapping, for example, messing up accounting during unmap and breaking MAP_SHARED semantics: # echo 2 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages # ./test # cat /proc/meminfo | grep HugePages_ HugePages_Total: 2 HugePages_Free: 1 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Reason in this particular case is that vma_wants_writenotify() will return "true", removing VM_SHARED in vma_set_page_prot() to map pages write-protected. Let's teach vma_wants_writenotify() that hugetlb does not support softdirty tracking. Link: https://lkml.kernel.org/r/20220811103435.188481-1-david@redhat.com Link: https://lkml.kernel.org/r/20220811103435.188481-2-david@redhat.com Fixes: 64e455079e1b ("mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared") Signed-off-by: David Hildenbrand Reviewed-by: Mike Kravetz Cc: Peter Feiner Cc: Kirill A. Shutemov Cc: Cyrill Gorcunov Cc: Pavel Emelyanov Cc: Jamie Liu Cc: Hugh Dickins Cc: Naoya Horiguchi Cc: Bjorn Helgaas Cc: Muchun Song Cc: Peter Xu Cc: [3.18+] Signed-off-by: Andrew Morton Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman commit 6ee82524b0aa6433944db7a3999b9e122eb4d48f Author: Greg Kroah-Hartman Date: Mon Aug 29 10:07:09 2022 +0200 Revert "usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling" This reverts commit eaf3a094d8924ecb0baacf6df62ae1c6a96083cf which is upstream commit 1ce8b37241ed291af56f7a49bbdbf20c08728e88. It is reported to cause problems, so drop it from the 5.15.y tree until the root cause can be determined. Reported-by: Lukas Wunner Cc: Oleksij Rempel Cc: Ferry Toth Cc: Andrew Lunn Cc: Andre Edich Cc: David S. Miller Cc: Sasha Levin Link: https://lore.kernel.org/r/20220826132137.GA24932@wunner.de Signed-off-by: Greg Kroah-Hartman commit 7ae43647f499509aeba22c761e2345eee26e4cd0 Author: Greg Kroah-Hartman Date: Mon Aug 29 10:06:53 2022 +0200 Revert "usbnet: smsc95xx: Fix deadlock on runtime resume" This reverts commit b574d1e3e9a2432b5acd9c4a9dc8d70b6a37aaf1 which is commit 7b960c967f2aa01ab8f45c5a0bd78e754cffdeee upstream. It is reported to cause problems, so drop it from the 5.15.y tree until the root cause can be determined. Reported-by: Lukas Wunner Cc: Oleksij Rempel Cc: Ferry Toth Cc: Andrew Lunn Cc: Andre Edich Cc: David S. Miller Cc: Sasha Levin Link: https://lore.kernel.org/r/20220826132137.GA24932@wunner.de Signed-off-by: Greg Kroah-Hartman commit 295219ab7d6250e56cba480cb8b46302401d9cce Author: Jens Axboe Date: Thu Aug 25 10:19:08 2022 -0600 io_uring: fix issue with io_write() not always undoing sb_start_write() commit e053aaf4da56cbf0afb33a0fda4a62188e2c0637 upstream. This is actually an older issue, but we never used to hit the -EAGAIN path before having done sb_start_write(). Make sure that we always call kiocb_end_write() if we need to retry the write, so that we keep the calls to sb_start_write() etc balanced. Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit f8aafb25ec38cf6f43cadb4c09ad2e577f48f349 Author: Conor Dooley Date: Sun Aug 14 15:12:38 2022 +0100 riscv: traps: add missing prototype commit d951b20b9def73dcc39a5379831525d0d2a537e9 upstream. Sparse complains: arch/riscv/kernel/traps.c:213:6: warning: symbol 'shadow_stack' was not declared. Should it be static? The variable is used in entry.S, so declare shadow_stack there alongside SHADOW_OVERFLOW_STACK_SIZE. Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection") Signed-off-by: Conor Dooley Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220814141237.493457-5-mail@conchuod.ie Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman commit c2b7bae7c90051fd6a679d5dee00400d67ebbf4a Author: Juergen Gross Date: Thu Aug 25 16:19:18 2022 +0200 xen/privcmd: fix error exit of privcmd_ioctl_dm_op() commit c5deb27895e017a0267de0a20d140ad5fcc55a54 upstream. The error exit of privcmd_ioctl_dm_op() is calling unlock_pages() potentially with pages being NULL, leading to a NULL dereference. Additionally lock_pages() doesn't check for pin_user_pages_fast() having been completely successful, resulting in potentially not locking all pages into memory. This could result in sporadic failures when using the related memory in user mode. Fix all of that by calling unlock_pages() always with the real number of pinned pages, which will be zero in case pages being NULL, and by checking the number of pages pinned by pin_user_pages_fast() matching the expected number of pages. Cc: Fixes: ab520be8cd5d ("xen/privcmd: Add IOCTL_PRIVCMD_DM_OP") Reported-by: Rustam Subkhankulov Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Reviewed-by: Oleksandr Tyshchenko Link: https://lore.kernel.org/r/20220825141918.3581-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman commit 0351fdbd8cb48b2eceb3e923b57349b8c9f841e1 Author: David Howells Date: Tue Aug 23 02:10:56 2022 -0500 smb3: missing inode locks in punch hole commit ba0803050d610d5072666be727bca5e03e55b242 upstream. smb3 fallocate punch hole was not grabbing the inode or filemap_invalidate locks so could have race with pagemap reinstantiating the page. Cc: stable@vger.kernel.org Signed-off-by: David Howells Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 3640cdccbe75b8922e5bfc0191dd37e3aaa24833 Author: Karol Herbst Date: Fri Aug 19 22:09:28 2022 +0200 nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf commit 6b04ce966a738ecdd9294c9593e48513c0dc90aa upstream. It is a bit unlcear to us why that's helping, but it does and unbreaks suspend/resume on a lot of GPUs without any known drawbacks. Cc: stable@vger.kernel.org # v5.15+ Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/156 Signed-off-by: Karol Herbst Reviewed-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20220819200928.401416-1-kherbst@redhat.com Signed-off-by: Greg Kroah-Hartman commit b490dfcbb921cd6a2228308728370bc7f169ee31 Author: Riwen Lu Date: Tue Aug 23 15:43:42 2022 +0800 ACPI: processor: Remove freq Qos request for all CPUs commit 36527b9d882362567ceb4eea8666813280f30e6f upstream. The freq Qos request would be removed repeatedly if the cpufreq policy relates to more than one CPU. Then, it would cause the "called for unknown object" warning. Remove the freq Qos request for each CPU relates to the cpufreq policy, instead of removing repeatedly for the last CPU of it. Fixes: a1bb46c36ce3 ("ACPI: processor: Add QoS requests for all CPUs") Reported-by: Jeremy Linton Tested-by: Jeremy Linton Signed-off-by: Riwen Lu Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit f1aedd2ffeade0f7e630a34845b51f8bf58d08f3 Author: Shakeel Butt Date: Wed Aug 17 17:21:39 2022 +0000 Revert "memcg: cleanup racy sum avoidance code" commit dbb16df6443c59e8a1ef21c2272fcf387d600ddf upstream. This reverts commit 96e51ccf1af33e82f429a0d6baebba29c6448d0f. Recently we started running the kernel with rstat infrastructure on production traffic and begin to see negative memcg stats values. Particularly the 'sock' stat is the one which we observed having negative value. $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 18446744073708724224 Re-run after couple of seconds $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 53248 For now we are only seeing this issue on large machines (256 CPUs) and only with 'sock' stat. I think the networking stack increase the stat on one cpu and decrease it on another cpu much more often. So, this negative sock is due to rstat flusher flushing the stats on the CPU that has seen the decrement of sock but missed the CPU that has increments. A typical race condition. For easy stable backport, revert is the most simple solution. For long term solution, I am thinking of two directions. First is just reduce the race window by optimizing the rstat flusher. Second is if the reader sees a negative stat value, force flush and restart the stat collection. Basically retry but limited. Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com Fixes: 96e51ccf1af33e8 ("memcg: cleanup racy sum avoidance code") Signed-off-by: Shakeel Butt Cc: "Michal Koutný" Cc: Johannes Weiner Cc: Michal Hocko Cc: Roman Gushchin Cc: Muchun Song Cc: David Hildenbrand Cc: Yosry Ahmed Cc: Greg Thelen Cc: [5.15] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit ebd6f886aa2447fcfcdce5450c9e1028e1d681bb Author: Shigeru Yoshida Date: Fri Aug 19 03:13:36 2022 +0900 fbdev: fbcon: Properly revert changes when vc_resize() failed commit a5a923038d70d2d4a86cb4e3f32625a5ee6e7e24 upstream. fbcon_do_set_font() calls vc_resize() when font size is changed. However, if if vc_resize() failed, current implementation doesn't revert changes for font size, and this causes inconsistent state. syzbot reported unable to handle page fault due to this issue [1]. syzbot's repro uses fault injection which cause failure for memory allocation, so vc_resize() failed. This patch fixes this issue by properly revert changes for font related date when vc_resize() failed. Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1] Reported-by: syzbot+a168dbeaaa7778273c1b@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida Signed-off-by: Helge Deller CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Greg Kroah-Hartman commit 8195e065abf3df84eb0ad2987e76a40f21d1791c Author: Brian Foster Date: Tue Aug 16 11:54:07 2022 -0400 s390: fix double free of GS and RI CBs on fork() failure commit 13cccafe0edcd03bf1c841de8ab8a1c8e34f77d9 upstream. The pointers for guarded storage and runtime instrumentation control blocks are stored in the thread_struct of the associated task. These pointers are initially copied on fork() via arch_dup_task_struct() and then cleared via copy_thread() before fork() returns. If fork() happens to fail after the initial task dup and before copy_thread(), the newly allocated task and associated thread_struct memory are freed via free_task() -> arch_release_task_struct(). This results in a double free of the guarded storage and runtime info structs because the fields in the failed task still refer to memory associated with the source task. This problem can manifest as a BUG_ON() in set_freepointer() (with CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled) when running trinity syscall fuzz tests on s390x. To avoid this problem, clear the associated pointer fields in arch_dup_task_struct() immediately after the new task is copied. Note that the RI flag is still cleared in copy_thread() because it resides in thread stack memory and that is where stack info is copied. Signed-off-by: Brian Foster Fixes: 8d9047f8b967c ("s390/runtime instrumentation: simplify task exit handling") Fixes: 7b83c6297d2fc ("s390/guarded storage: simplify task exit handling") Cc: # 4.15 Reviewed-by: Gerald Schaefer Reviewed-by: Heiko Carstens Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 16a12ee619e39e8112f61b603255c16b73b6264b Author: Liu Shixin Date: Fri Aug 19 17:40:05 2022 +0800 bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem commit dd0ff4d12dd284c334f7e9b07f8f335af856ac78 upstream. The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com Fixes: f41f2ed43ca5 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page) Signed-off-by: Liu Shixin Reviewed-by: Muchun Song Cc: Matthew Wilcox Cc: Mike Kravetz Cc: Oscar Salvador Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 9227599cd987704c6dfc94b9929fc4a21ed1c4ab Author: Gerald Schaefer Date: Wed Aug 17 15:26:03 2022 +0200 s390/mm: do not trigger write fault when vma does not allow VM_WRITE commit 41ac42f137080bc230b5882e3c88c392ab7f2d32 upstream. For non-protection pXd_none() page faults in do_dat_exception(), we call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC). In do_exception(), vma->vm_flags is checked against that before calling handle_mm_fault(). Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"), we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that it was a write access. However, the vma flags check is still only checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma does not allow VM_WRITE. Fix this by changing access check in do_exception() to VM_WRITE only, when recognizing write access. Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization") Cc: Reported-by: David Hildenbrand Reviewed-by: Heiko Carstens Signed-off-by: Gerald Schaefer Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit ddcb0696136b9af1c8d489fd4763e12f52864b95 Author: Badari Pulavarty Date: Sun Aug 21 18:08:53 2022 +0000 mm/damon/dbgfs: avoid duplicate context directory creation commit d26f60703606ab425eee9882b32a1781a8bed74d upstream. When user tries to create a DAMON context via the DAMON debugfs interface with a name of an already existing context, the context directory creation fails but a new context is created and added in the internal data structure, due to absence of the directory creation success check. As a result, memory could leak and DAMON cannot be turned on. An example test case is as below: # cd /sys/kernel/debug/damon/ # echo "off" > monitor_on # echo paddr > target_ids # echo "abc" > mk_context # echo "abc" > mk_context # echo $$ > abc/target_ids # echo "on" > monitor_on <<< fails Return value of 'debugfs_create_dir()' is expected to be ignored in general, but this is an exceptional case as DAMON feature is depending on the debugfs functionality and it has the potential duplicate name issue. This commit therefore fixes the issue by checking the directory creation failure and immediately return the error in the case. Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: Badari Pulavarty Signed-off-by: SeongJae Park Cc: [ 5.15.x] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 95587037ea58755c122f66ecaf8959a75048333e Author: Quanyang Wang Date: Fri Aug 19 16:11:45 2022 +0800 asm-generic: sections: refactor memory_intersects commit 0c7d7cc2b4fe2e74ef8728f030f0f1674f9f6aee upstream. There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834a027e ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834a027e ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 979559362516 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang Cc: Ard Biesheuvel Cc: Arnd Bergmann Cc: Thierry Reding Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit f96b9f7c1676923bce871e728bb49c0dfa5013cc Author: Khazhismel Kumykov Date: Mon Aug 1 08:50:34 2022 -0700 writeback: avoid use-after-free after removing device commit f87904c075515f3e1d8f4a7115869d3b914674fd upstream. When a disk is removed, bdi_unregister gets called to stop further writeback and wait for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation dwork after this has completed, which can result in the timer attempting to access the just freed bdi_writeback. Fix this by checking if the bdi_writeback is alive, similar to when scheduling writeback work. Since this requires wb->work_lock, and wb_inode_writeback_end() may get called from interrupt, switch wb->work_lock to an irqsafe lock. Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com Fixes: 45a2966fd641 ("writeback: fix bandwidth estimate for spiky workload") Signed-off-by: Khazhismel Kumykov Reviewed-by: Jan Kara Cc: Michael Stapelberg Cc: Wu Fengguang Cc: Alexander Viro Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 0455bef69028c65065f16bb04635591b2374249b Author: Siddh Raman Pant Date: Tue Aug 23 21:38:10 2022 +0530 loop: Check for overflow while configuring loop commit c490a0b5a4f36da3918181a8acdc6991d967c5f3 upstream. The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Reviewed-by: Matthew Wilcox (Oracle) Signed-off-by: Siddh Raman Pant Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 500195a109bc911a6199488f6aec28a538b6c882 Author: Peter Zijlstra Date: Tue Aug 16 14:28:36 2022 +0200 x86/nospec: Unwreck the RSB stuffing commit 4e3aa9238277597c6c7624f302d81a7b568b6f2d upstream. Commit 2b1299322016 ("x86/speculation: Add RSB VM Exit protections") made a right mess of the RSB stuffing, rewrite the whole thing to not suck. Thanks to Andrew for the enlightening comment about Post-Barrier RSB things so we can make this code less magical. Cc: stable@vger.kernel.org Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/YvuNdDWoUZSBjYcm@worktop.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman commit 75fa6c733b85d99462bd70a55b757aef6a1996ab Author: Pawan Gupta Date: Wed Aug 3 14:41:32 2022 -0700 x86/bugs: Add "unknown" reporting for MMIO Stale Data commit 7df548840c496b0141fb2404b889c346380c2b22 upstream. Older Intel CPUs that are not in the affected processor list for MMIO Stale Data vulnerabilities currently report "Not affected" in sysfs, which may not be correct. Vulnerability status for these older CPUs is unknown. Add known-not-affected CPUs to the whitelist. Report "unknown" mitigation status for CPUs that are not in blacklist, whitelist and also don't enumerate MSR ARCH_CAPABILITIES bits that reflect hardware immunity to MMIO Stale Data vulnerabilities. Mitigation is not deployed when the status is unknown. [ bp: Massage, fixup. ] Fixes: 8d50cdf8b834 ("x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data") Suggested-by: Andrew Cooper Suggested-by: Tony Luck Signed-off-by: Pawan Gupta Signed-off-by: Borislav Petkov Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/a932c154772f2121794a5f2eded1a11013114711.1657846269.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit a7484eb9f3e0ed99942d032a192b8bf4e9f67319 Author: Chen Zhongjin Date: Fri Aug 19 16:43:34 2022 +0800 x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry commit fc2e426b1161761561624ebd43ce8c8d2fa058da upstream. When meeting ftrace trampolines in ORC unwinding, unwinder uses address of ftrace_{regs_}call address to find the ORC entry, which gets next frame at sp+176. If there is an IRQ hitting at sub $0xa8,%rsp, the next frame should be sp+8 instead of 176. It makes unwinder skip correct frame and throw warnings such as "wrong direction" or "can't access registers", etc, depending on the content of the incorrect frame address. By adding the base address ftrace_{regs_}caller with the offset *ip - ops->trampoline*, we can get the correct address to find the ORC entry. Also change "caller" to "tramp_addr" to make variable name conform to its content. [ mingo: Clarified the changelog a bit. ] Fixes: 6be7fa3c74d1 ("ftrace, orc, x86: Handle ftrace dynamically allocated trampolines") Signed-off-by: Chen Zhongjin Signed-off-by: Ingo Molnar Reviewed-by: Steven Rostedt (Google) Cc: Link: https://lore.kernel.org/r/20220819084334.244016-1-chenzhongjin@huawei.com Signed-off-by: Greg Kroah-Hartman commit 1cdfef6cd296e5b314e998a6228f82c26fdbbfd3 Author: Kan Liang Date: Tue Aug 16 05:56:11 2022 -0700 perf/x86/lbr: Enable the branch type for the Arch LBR by default commit 32ba156df1b1c8804a4e5be5339616945eafea22 upstream. On the platform with Arch LBR, the HW raw branch type encoding may leak to the perf tool when the SAVE_TYPE option is not set. In the intel_pmu_store_lbr(), the HW raw branch type is stored in lbr_entries[].type. If the SAVE_TYPE option is set, the lbr_entries[].type will be converted into the generic PERF_BR_* type in the intel_pmu_lbr_filter() and exposed to the user tools. But if the SAVE_TYPE option is NOT set by the user, the current perf kernel doesn't clear the field. The HW raw branch type leaks. There are two solutions to fix the issue for the Arch LBR. One is to clear the field if the SAVE_TYPE option is NOT set. The other solution is to unconditionally convert the branch type and expose the generic type to the user tools. The latter is implemented here, because - The branch type is valuable information. I don't see a case where you would not benefit from the branch type. (Stephane Eranian) - Not having the branch type DOES NOT save any space in the branch record (Stephane Eranian) - The Arch LBR HW can retrieve the common branch types from the LBR_INFO. It doesn't require the high overhead SW disassemble. Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR") Reported-by: Stephane Eranian Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220816125612.2042397-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 5f52402c77013e4a826394b807dd5ea4dc83bd72 Author: Zixuan Fu Date: Mon Aug 15 23:16:06 2022 +0800 btrfs: fix possible memory leak in btrfs_get_dev_args_from_path() commit 9ea0106a7a3d8116860712e3f17cd52ce99f6707 upstream. In btrfs_get_dev_args_from_path(), btrfs_get_bdev_and_sb() can fail if the path is invalid. In this case, btrfs_get_dev_args_from_path() returns directly without freeing args->uuid and args->fsid allocated before, which causes memory leak. To fix these possible leaks, when btrfs_get_bdev_and_sb() fails, btrfs_put_dev_args_from_path() is called to clean up the memory. Reported-by: TOTE Robot Fixes: faa775c41d655 ("btrfs: add a btrfs_get_dev_args_from_path helper") CC: stable@vger.kernel.org # 5.16 Reviewed-by: Boris Burkov Signed-off-by: Zixuan Fu Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 793505888d60bd50d5481d6957af3583f5c91a95 Author: Goldwyn Rodrigues Date: Tue Aug 16 16:42:56 2022 -0500 btrfs: check if root is readonly while setting security xattr commit b51111271b0352aa596c5ae8faf06939e91b3b68 upstream. For a filesystem which has btrfs read-only property set to true, all write operations including xattr should be denied. However, security xattr can still be changed even if btrfs ro property is true. This happens because xattr_permission() does not have any restrictions on security.*, system.* and in some cases trusted.* from VFS and the decision is left to the underlying filesystem. See comments in xattr_permission() for more details. This patch checks if the root is read-only before performing the set xattr operation. Testcase: DEV=/dev/vdb MNT=/mnt mkfs.btrfs -f $DEV mount $DEV $MNT echo "file one" > $MNT/f1 setfattr -n "security.one" -v 2 $MNT/f1 btrfs property set /mnt ro true setfattr -n "security.one" -v 1 $MNT/f1 umount $MNT CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo Reviewed-by: Filipe Manana Signed-off-by: Goldwyn Rodrigues Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 2aa1a1cff81d7eedc64cadce841451181665e616 Author: Anand Jain Date: Fri Aug 12 18:32:19 2022 +0800 btrfs: add info when mount fails due to stale replace target commit f2c3bec215694fb8bc0ef5010f2a758d1906fc2d upstream. If the replace target device reappears after the suspended replace is cancelled, it blocks the mount operation as it can't find the matching replace-item in the metadata. As shown below, BTRFS error (device sda5): replace devid present without an active replace item To overcome this situation, the user can run the command btrfs device scan --forget and try the mount command again. And also, to avoid repeating the issue, superblock on the devid=0 must be wiped. wipefs -a device-path-to-devid=0. This patch adds some info when this situation occurs. Reported-by: Samuel Greiner Link: https://lore.kernel.org/linux-btrfs/b4f62b10-b295-26ea-71f9-9a5c9299d42c@balkonien.org/T/ CC: stable@vger.kernel.org # 5.0+ Signed-off-by: Anand Jain Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 17343a515fa5be0a41702dfbf8b6a8746084f26b Author: Anand Jain Date: Fri Aug 12 18:32:18 2022 +0800 btrfs: replace: drop assert for suspended replace commit 59a3991984dbc1fc47e5651a265c5200bd85464e upstream. If the filesystem mounts with the replace-operation in a suspended state and try to cancel the suspended replace-operation, we hit the assert. The assert came from the commit fe97e2e173af ("btrfs: dev-replace: replace's scrub must not be running in suspended state") that was actually not required. So just remove it. $ mount /dev/sda5 /btrfs BTRFS info (device sda5): cannot continue dev_replace, tgtdev is missing BTRFS info (device sda5): you may cancel the operation after 'mount -o degraded' $ mount -o degraded /dev/sda5 /btrfs <-- success. $ btrfs replace cancel /btrfs kernel: assertion failed: ret != -ENOTCONN, in fs/btrfs/dev-replace.c:1131 kernel: ------------[ cut here ]------------ kernel: kernel BUG at fs/btrfs/ctree.h:3750! After the patch: $ btrfs replace cancel /btrfs BTRFS info (device sda5): suspended dev_replace from /dev/sda5 (devid 1) to canceled Fixes: fe97e2e173af ("btrfs: dev-replace: replace's scrub must not be running in suspended state") CC: stable@vger.kernel.org # 5.0+ Signed-off-by: Anand Jain Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 34cab3bba8cadd27621b35ad53c957ad63033fd8 Author: Filipe Manana Date: Mon Aug 22 15:47:09 2022 +0100 btrfs: fix silent failure when deleting root reference commit 47bf225a8d2cccb15f7e8d4a1ed9b757dd86afd7 upstream. At btrfs_del_root_ref(), if btrfs_search_slot() returns an error, we end up returning from the function with a value of 0 (success). This happens because the function returns the value stored in the variable 'err', which is 0, while the error value we got from btrfs_search_slot() is stored in the 'ret' variable. So fix it by setting 'err' with the error value. Fixes: 8289ed9f93bef2 ("btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling") CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 50396e19d9d891d7ef17bc83fafc0ca7c93a8d63 Author: Heiner Kallweit Date: Wed Aug 24 22:34:49 2022 +0200 net: stmmac: work around sporadic tx issue on link-up [ Upstream commit a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ] This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a146ed ("stmmac: add the experimental PCI support") Suggested-by: Qi Duan Suggested-by: Jerome Brunet Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 48f4d54ccc4d249e936e2d82bc8d37e3662abc9f Author: R Mohamed Shah Date: Wed Aug 24 09:50:51 2022 -0700 ionic: VF initial random MAC address if no assigned mac [ Upstream commit 19058be7c48ceb3e60fa3948e24da1059bd68ee4 ] Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807e9ae ("ionic: support sr-iov operations") Signed-off-by: R Mohamed Shah Signed-off-by: Shannon Nelson Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bcbf1d959933fda1042625fe46129ca0d494c858 Author: Shannon Nelson Date: Wed Aug 24 09:50:50 2022 -0700 ionic: fix up issues with handling EAGAIN on FW cmds [ Upstream commit 0fc4dd452d6c14828eed6369155c75c0ac15bab3 ] In looping on FW update tests we occasionally see the FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop waiting for the FW activate step to finsh inside the FW. The firmware is complaining that the done bit is set when a new dev_cmd is going to be processed. Doing a clean on the cmd registers and doorbell before exiting the wait-for-done and cleaning the done bit before the sleep prevents this from occurring. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Shannon Nelson Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9a41433cc73b20db36eec0f91d0c83cacc55879b Author: Shannon Nelson Date: Wed Aug 24 09:50:49 2022 -0700 ionic: clear broken state on generation change [ Upstream commit 9cb9dadb8f45c67e4310e002c2f221b70312b293 ] There is a case found in heavy testing where a link flap happens just before a firmware Recovery event and the driver gets stuck in the BROKEN state. This comes from the driver getting interrupted by a FW generation change when coming back up from the link flap, and the call to ionic_start_queues() in ionic_link_status_check() fails. This can be addressed by having the fw_up code clear the BROKEN bit if seen, rather than waiting for a user to manually force the interface down and then back up. Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state") Signed-off-by: Shannon Nelson Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8d2761dbfcb9e4ae801c9c3431b33280438c4072 Author: Shannon Nelson Date: Fri Oct 1 11:05:54 2021 -0700 ionic: widen queue_lock use around lif init and deinit [ Upstream commit 2624d95972dbebe5f226361bfc51a83bdb68c93b ] Widen the coverage of the queue_lock to be sure the lif init and lif deinit actions are protected. This addresses a hang seen when a Tx Timeout action was attempted at the same time as a FW Reset was started. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 2bc769b8edb158be7379d15f36e23d66cf850053 Author: David Howells Date: Wed Aug 24 17:35:45 2022 +0100 rxrpc: Fix locking in rxrpc's sendmsg [ Upstream commit b0f571ecd7943423c25947439045f0d352ca3dbf ] Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei cc: Khalid Masum cc: Dan Carpenter cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0c3fd13b9c6d461486599be37fe4f6eb270cc98e Author: Sylwester Dziedziuch Date: Fri Aug 19 12:45:52 2022 +0200 i40e: Fix incorrect address type for IPv6 flow rules [ Upstream commit bcf3a156429306070afbfda5544f2b492d25e75b ] It was not possible to create 1-tuple flow director rule for IPv6 flow type. It was caused by incorrectly checking for source IP address when validating user provided destination IP address. Fix this by changing ip6src to correct ip6dst address in destination IP address validation for IPv6 flow type. Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6") Signed-off-by: Sylwester Dziedziuch Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit bda3e38924345a759ea68171f94dbf1d09df106a Author: Jacob Keller Date: Mon Aug 1 17:24:19 2022 -0700 ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter [ Upstream commit 25d7a5f5a6bb15a2dae0a3f39ea5dda215024726 ] The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne Reported-by: Ilya Evenbach Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit cb9eaedd9fc0871faef0949d25f7c732db5dcd6c Author: Kuniyuki Iwashima Date: Tue Aug 23 10:47:00 2022 -0700 net: Fix a data-race around sysctl_somaxconn. [ Upstream commit 3c9ba81d72047f2e81bb535d42856517b613aba7 ] While reading sysctl_somaxconn, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b340f83dafbaf821cc2ab5f078a3652c0d09f97a Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:57 2022 -0700 net: Fix data-races around sysctl_devconf_inherit_init_net. [ Upstream commit a5612ca10d1aa05624ebe72633e0c8c792970833 ] While reading sysctl_devconf_inherit_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 181bae6dff66401a2fee4345242ed8a760493a62 Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:56 2022 -0700 net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. [ Upstream commit af67508ea6cbf0e4ea27f8120056fa2efce127dd ] While reading sysctl_fb_tunnels_only_for_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ed14f10e13f6d6ba268a582eb6e996ceec7731d5 Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:55 2022 -0700 net: Fix a data-race around netdev_budget_usecs. [ Upstream commit fa45d484c52c73f79db2c23b0cdfc6c6455093ad ] While reading netdev_budget_usecs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 70564ad8d1904cccba13f002cb07730b3aac25dd Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:54 2022 -0700 net: Fix data-races around sysctl_max_skb_frags. [ Upstream commit 657b991afb89d25fe6c4783b1b75a8ad4563670d ] While reading sysctl_max_skb_frags, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 5f74f82ea34c ("net:Add sysctl_max_skb_frags") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 289f2f58266777f45a52cd55dea96d736e6244c9 Author: Paolo Abeni Date: Wed Sep 22 19:26:41 2021 +0200 mptcp: stop relying on tcp_tx_skb_cache [ Upstream commit f70cad1085d1e01d3ec73c1078405f906237feee ] We want to revert the skb TX cache, but MPTCP is currently using it unconditionally. Rework the MPTCP tx code, so that tcp_tx_skb_cache is not needed anymore: do the whole coalescing check, skb allocation skb initialization/update inside mptcp_sendmsg_frag(), quite alike the current TCP code. Reviewed-by: Mat Martineau Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit a07f3af6393a7f80cac1eda4255fc7a770eb26df Author: Paolo Abeni Date: Wed Sep 22 19:26:40 2021 +0200 tcp: expose the tcp_mark_push() and tcp_skb_entail() helpers [ Upstream commit 04d8825c30b718781197c8f07b1915a11bfb8685 ] the tcp_skb_entail() helper is actually skb_entail(), renamed to provide proper scope. The two helper will be used by the next patch. RFC -> v1: - rename skb_entail to tcp_skb_entail (Eric) Acked-by: Mat Martineau Signed-off-by: Paolo Abeni Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 2baeaef4dd7348fbe9c33d6245fd719bf1deca03 Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:53 2022 -0700 net: Fix a data-race around netdev_budget. [ Upstream commit 2e0c42374ee32e72948559d2ae2f7ba3dc6b977c ] While reading netdev_budget, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 51b0bdedb8e7 ("[NET]: Separate two usages of netdev_max_backlog.") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8e9e124aeb9c204198c8a60dff5e64d423356196 Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:52 2022 -0700 net: Fix a data-race around sysctl_net_busy_read. [ Upstream commit e59ef36f0795696ab229569c153936bfd068d21c ] While reading sysctl_net_busy_read, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 2d48d67fa8cd ("net: poll/select low latency socket support") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 4e12829fd3b9fd428424e865fbb90c093080cb4d Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:51 2022 -0700 net: Fix a data-race around sysctl_net_busy_poll. [ Upstream commit c42b7cddea47503411bfb5f2f93a4154aaffa2d9 ] While reading sysctl_net_busy_poll, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 060212928670 ("net: add low latency socket poll") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f6b5be42ce4bd5dfcb69a82d959c68a2dc3636bc Author: Kuniyuki Iwashima Date: Tue Aug 23 10:46:50 2022 -0700 net: Fix a data-race around sysctl_tstamp_allow_data. [ Upstream commit d2154b0afa73c0159b2856f875c6b4fe7cf6a95e ] While reading sysctl_tstamp_allow_data, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: b245be1f4db1 ("net-timestamp: no-payload only sysctl") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit d39a02760bf2c87e1a652e7b607a29436fd21762 Author: Kuniyuki Iwashima