OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 12:30:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libxcb-1.12-5.0.riscv64.fc27.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libxcb.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.8 MB/s | 863 kB 00:04 ETA Local RPMS 11% [== ] 2.8 MB/s | 1.6 MB 00:04 ETA Local RPMS 18% [===- ] 2.8 MB/s | 2.6 MB 00:04 ETA Local RPMS 25% [===== ] 2.8 MB/s | 3.5 MB 00:03 ETA Local RPMS 32% [====== ] 2.8 MB/s | 4.5 MB 00:03 ETA Local RPMS 38% [=======- ] 2.8 MB/s | 5.4 MB 00:02 ETA Local RPMS 45% [========= ] 2.9 MB/s | 6.3 MB 00:02 ETA Local RPMS 52% [==========- ] 2.9 MB/s | 7.3 MB 00:02 ETA Local RPMS 55% [=========== ] 2.6 MB/s | 7.7 MB 00:02 ETA Local RPMS 61% [============ ] 2.7 MB/s | 8.5 MB 00:01 ETA Local RPMS 67% [=============- ] 2.7 MB/s | 9.4 MB 00:01 ETA Local RPMS 74% [==============- ] 2.7 MB/s | 10 MB 00:01 ETA Local RPMS 81% [================ ] 2.7 MB/s | 11 MB 00:00 ETA Local RPMS 88% [=================- ] 2.7 MB/s | 12 MB 00:00 ETA Local RPMS 94% [==================- ] 2.8 MB/s | 13 MB 00:00 ETA Local RPMS 2.2 MB/s | 14 MB 00:06 Last metadata expiration check: 0:01:51 ago on Thu Feb 22 12:30:37 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: doxygen riscv64 1:1.8.12-1.fc27 local 4.0 M libXau-devel riscv64 1.0.8-6.fc28 local 18 k libtool riscv64 2.4.6-21.fc27 local 707 k libxslt riscv64 1.1.28-13.fc28 local 506 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python2 riscv64 2.7.14-9.fc28 local 107 k xcb-proto noarch 1.12-6.fc28 local 134 k xorg-x11-util-macros noarch 1.19.0-5.fc24 local 54 k Installing dependencies: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k emacs-filesystem noarch 1:25.3-5.fc28 local 67 k libXau riscv64 1.0.8-6.fc28 local 41 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M tar riscv64 2:1.29-7.fc27 local 805 k xorg-x11-proto-devel noarch 7.7-20.fc25 local 287 k Transaction Summary ================================================================================ Install 53 Packages Total download size: 31 M Installed size: 107 M Downloading Packages: (1/53): doxygen-1.8. 0% [ ] --- B/s | 0 B --:-- ETA (1/53): libXau-devel-1.0.8-6.fc28.riscv64.rpm 251 kB/s | 18 kB 00:00 (2-3/53): xorg-x11-u 0% [ ] 970 kB/s | 97 kB 00:33 ETA (2/53): xorg-x11-util-macros-1.19.0-5.fc24.noar 415 kB/s | 54 kB 00:00 (3-4/53): libXau-1.0 0% [ ] 968 kB/s | 152 kB 00:33 ETA (3/53): libXau-1.0.8-6.fc28.riscv64.rpm 284 kB/s | 41 kB 00:00 (4-5/53): libtool-2. 0% [ ] 975 kB/s | 289 kB 00:32 ETA (4-6/53): doxygen-1. 3% [- ] 1.1 MB/s | 1.1 MB 00:28 ETA (4-6/53): doxygen-1. 6% [= ] 1.2 MB/s | 2.0 MB 00:25 ETA (4/53): libtool-2.4.6-21.fc27.riscv64.rpm 816 kB/s | 707 kB 00:00 (5-6/53): doxygen-1. 7% [= ] 1.2 MB/s | 2.2 MB 00:24 ETA (5/53): tar-1.29-7.fc27.riscv64.rpm 774 kB/s | 805 kB 00:01 (6-7/53): doxygen-1. 8% [=- ] 1.2 MB/s | 2.6 MB 00:24 ETA (6/53): pkgconf-pkg-config-1.4.1-1.fc27.riscv64 443 kB/s | 14 kB 00:00 (7-8/53): doxygen-1. 8% [=- ] 1.2 MB/s | 2.7 MB 00:24 ETA (7/53): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 562 kB/s | 15 kB 00:00 (8-9/53): doxygen-1. 8% [=- ] 1.2 MB/s | 2.7 MB 00:24 ETA (8/53): pkgconf-1.4.1-1.fc27.riscv64.rpm 553 kB/s | 35 kB 00:00 (9-10/53): doxygen-1 9% [=- ] 1.2 MB/s | 2.9 MB 00:23 ETA (9/53): libpkgconf-1.4.1-1.fc27.riscv64.rpm 731 kB/s | 74 kB 00:00 (10-11/53): doxygen- 9% [=- ] 1.2 MB/s | 3.1 MB 00:23 ETA (10/53): xcb-proto-1.12-6.fc28.noarch.rpm 832 kB/s | 134 kB 00:00 (11-12/53): doxygen- 11% [== ] 1.2 MB/s | 3.5 MB 00:22 ETA (11/53): libxslt-1.1.28-13.fc28.riscv64.rpm 547 kB/s | 506 kB 00:00 (12-13/53): python2- 11% [== ] 1.2 MB/s | 3.7 MB 00:22 ETA (12/53): python2-2.7.14-9.fc28.riscv64.rpm 443 kB/s | 107 kB 00:00 (13-14/53): python2- 12% [== ] 1.2 MB/s | 3.8 MB 00:22 ETA (13-15/53): autoconf 14% [==- ] 1.3 MB/s | 4.7 MB 00:20 ETA (13-15/53): autoconf 17% [===- ] 1.4 MB/s | 5.5 MB 00:18 ETA (13/53): autoconf-2.69-26.fc28.noarch.rpm 866 kB/s | 709 kB 00:00 (14-15/53): doxygen- 18% [===- ] 1.4 MB/s | 5.9 MB 00:17 ETA (14/53): emacs-filesystem-25.3-5.fc28.noarch.rp 662 kB/s | 67 kB 00:00 (15-16/53): doxygen- 19% [===- ] 1.4 MB/s | 6.1 MB 00:17 ETA (15-17/53): doxygen- 22% [==== ] 1.5 MB/s | 7.0 MB 00:16 ETA (15-17/53): doxygen- 24% [====- ] 1.6 MB/s | 7.8 MB 00:14 ETA (15/53): automake-1.15.1-3.fc28.noarch.rpm 850 kB/s | 706 kB 00:00 (16-17/53): python2- 26% [===== ] 1.6 MB/s | 8.2 MB 00:14 ETA (16-18/53): python2- 28% [=====- ] 1.7 MB/s | 9.1 MB 00:13 ETA (16/53): xorg-x11-proto-devel-7.7-20.fc25.noarc 807 kB/s | 287 kB 00:00 (17-18/53): python2- 29% [=====- ] 1.7 MB/s | 9.1 MB 00:13 ETA (17/53): perl-Carp-1.42-408.fc27.0.riscv64.noar 655 kB/s | 84 kB 00:00 (18-19/53): python2- 29% [=====- ] 1.7 MB/s | 9.4 MB 00:13 ETA (18/53): perl-Exporter-5.72-408.fc27.0.riscv64. 748 kB/s | 87 kB 00:00 (19-20/53): python2- 30% [====== ] 1.7 MB/s | 9.7 MB 00:13 ETA (19/53): perl-File-Path-2.15-1.fc27.noarch.rpm 627 kB/s | 37 kB 00:00 (20-21/53): python2- 31% [====== ] 1.7 MB/s | 9.8 MB 00:12 ETA (20/53): perl-Getopt-Long-2.50-3.fc27.noarch.rp 776 kB/s | 61 kB 00:00 (21-22/53): python2- 31% [====== ] 1.7 MB/s | 10 MB 00:12 ETA (21/53): perl-Thread-Queue-3.12-408.fc27.0.risc 741 kB/s | 77 kB 00:00 (22-23/53): doxygen- 32% [======- ] 1.7 MB/s | 10 MB 00:12 ETA (22/53): perl-constant-1.33-408.fc27.0.riscv64. 782 kB/s | 79 kB 00:00 (23-24/53): doxygen- 33% [======- ] 1.7 MB/s | 10 MB 00:12 ETA (23/53): perl-Errno-1.28-408.fc28.1.riscv64.ris 747 kB/s | 73 kB 00:00 (24-25/53): doxygen- 33% [======- ] 1.7 MB/s | 11 MB 00:12 ETA (24-26/53): perl-lib 36% [======= ] 1.7 MB/s | 11 MB 00:11 ETA (24/53): doxygen-1.8.12-1.fc27.riscv64.rpm 669 kB/s | 4.0 MB 00:06 (25-26/53): perl-lib 37% [=======- ] 1.6 MB/s | 12 MB 00:12 ETA (25-27/53): python2- 40% [======== ] 1.6 MB/s | 13 MB 00:11 ETA (25-27/53): python2- 43% [========- ] 1.7 MB/s | 14 MB 00:10 ETA (25-27/53): perl-lib 45% [========= ] 1.8 MB/s | 14 MB 00:09 ETA (25-27/53): perl-lib 48% [=========- ] 1.8 MB/s | 15 MB 00:08 ETA (25-27/53): perl-lib 51% [========== ] 1.9 MB/s | 16 MB 00:08 ETA (25-27/53): perl-int 53% [==========- ] 2.0 MB/s | 17 MB 00:07 ETA (25-27/53): perl-int 56% [=========== ] 2.0 MB/s | 18 MB 00:06 ETA (25-27/53): perl-int 59% [===========- ] 2.1 MB/s | 19 MB 00:06 ETA (25-27/53): perl-int 62% [============ ] 2.1 MB/s | 20 MB 00:05 ETA (25-27/53): python2- 64% [============- ] 2.2 MB/s | 20 MB 00:05 ETA (25/53): perl-libs-5.26.1-408.fc28.1.riscv64.ri 757 kB/s | 3.3 MB 00:04 (26-27/53): python2- 65% [============= ] 2.0 MB/s | 21 MB 00:05 ETA (26/53): perl-IO-1.38-408.fc28.1.riscv64.riscv6 817 kB/s | 176 kB 00:00 (27-28/53): perl-int 67% [============= ] 2.0 MB/s | 21 MB 00:05 ETA (27/53): perl-PathTools-3.67-408.fc27.0.riscv64 813 kB/s | 166 kB 00:00 (28-29/53): perl-int 68% [=============- ] 2.0 MB/s | 22 MB 00:04 ETA (28/53): perl-threads-2.21-1.fc27.riscv64.rpm 682 kB/s | 104 kB 00:00 (29-30/53): perl-int 69% [=============- ] 2.0 MB/s | 22 MB 00:04 ETA (29/53): perl-Text-ParseWords-3.30-408.fc27.0.r 700 kB/s | 73 kB 00:00 (30-31/53): perl-int 70% [============== ] 2.0 MB/s | 22 MB 00:04 ETA (30-32/53): perl-int 73% [==============- ] 2.0 MB/s | 23 MB 00:04 ETA (30/53): m4-1.4.18-5.fc28.riscv64.rpm 827 kB/s | 369 kB 00:00 (31-32/53): python2- 74% [==============- ] 2.0 MB/s | 23 MB 00:03 ETA (31/53): perl-Data-Dumper-2.167-408.fc27.0.risc 753 kB/s | 149 kB 00:00 (32-33/53): python2- 75% [=============== ] 2.0 MB/s | 24 MB 00:03 ETA (32/53): perl-Text-Tabs+Wrap-2013.0523-408.fc27 772 kB/s | 80 kB 00:00 (33-34/53): python2- 76% [=============== ] 2.0 MB/s | 24 MB 00:03 ETA (33/53): perl-parent-0.236-408.fc27.0.riscv64.n 716 kB/s | 71 kB 00:00 (34-35/53): python2- 77% [=============== ] 2.0 MB/s | 24 MB 00:03 ETA (34/53): perl-Scalar-List-Utils-1.48-1.fc27.ris 766 kB/s | 119 kB 00:00 (35-36/53): python2- 78% [===============- ] 2.0 MB/s | 25 MB 00:03 ETA (35/53): perl-Unicode-Normalize-1.25-408.fc27.0 783 kB/s | 164 kB 00:00 (36-37/53): python2- 79% [===============- ] 2.0 MB/s | 25 MB 00:03 ETA (36/53): perl-macros-5.26.1-408.fc28.1.riscv64. 704 kB/s | 69 kB 00:00 (37-38/53): perl-int 80% [================ ] 2.0 MB/s | 25 MB 00:03 ETA (37/53): perl-threads-shared-1.58-1.fc27.riscv6 783 kB/s | 91 kB 00:00 (38-39/53): perl-int 81% [================ ] 2.0 MB/s | 26 MB 00:02 ETA (38/53): perl-Socket-2.027-1.fc27.riscv64.rpm 743 kB/s | 95 kB 00:00 (39-40/53): perl-int 82% [================ ] 2.0 MB/s | 26 MB 00:02 ETA (39/53): perl-Pod-Usage-1.69-408.fc27.0.riscv64 785 kB/s | 89 kB 00:00 (40-41/53): perl-int 83% [================- ] 2.0 MB/s | 26 MB 00:02 ETA (40/53): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 783 kB/s | 139 kB 00:00 (41-42/53): perl-int 84% [================- ] 2.0 MB/s | 27 MB 00:02 ETA (41/53): perl-podlators-4.09-408.fc27.0.riscv64 811 kB/s | 157 kB 00:00 (42-43/53): perl-int 86% [================= ] 2.0 MB/s | 27 MB 00:02 ETA (42/53): perl-File-Temp-0.230.400-408.fc27.0.ri 726 kB/s | 103 kB 00:00 (43-44/53): python2- 87% [================= ] 2.0 MB/s | 27 MB 00:02 ETA (43/53): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 766 kB/s | 97 kB 00:00 (44-45/53): python2- 88% [=================- ] 2.0 MB/s | 28 MB 00:01 ETA (44/53): python2-libs-2.7.14-9.fc28.riscv64.rpm 681 kB/s | 8.1 MB 00:12 (45-46/53): perl-Pod 88% [=================- ] 1.6 MB/s | 28 MB 00:02 ETA (45/53): perl-Pod-Simple-3.35-408.fc27.0.riscv6 202 kB/s | 271 kB 00:01 (46-47/53): perl-Enc 90% [================== ] 1.6 MB/s | 28 MB 00:01 ETA (46/53): perl-Time-Local-1.250-394.fc27.noarch. 702 kB/s | 30 kB 00:00 (47-48/53): perl-Enc 90% [================== ] 1.6 MB/s | 29 MB 00:01 ETA (47/53): perl-MIME-Base64-3.15-408.fc27.0.riscv 782 kB/s | 111 kB 00:00 (48-49/53): perl-Enc 92% [================== ] 1.6 MB/s | 29 MB 00:01 ETA (48/53): perl-Storable-2.62-408.fc27.0.riscv64. 860 kB/s | 205 kB 00:00 (49-50/53): perl-int 93% [==================- ] 1.7 MB/s | 29 MB 00:01 ETA (49/53): perl-Term-ANSIColor-4.06-408.fc27.0.ri 784 kB/s | 94 kB 00:00 (50-51/53): perl-int 94% [==================- ] 1.7 MB/s | 30 MB 00:00 ETA (50/53): perl-Term-Cap-1.17-408.fc27.0.riscv64. 773 kB/s | 78 kB 00:00 (51-52/53): perl-int 95% [=================== ] 1.7 MB/s | 30 MB 00:00 ETA (51/53): perl-Pod-Escapes-1.07-408.fc27.0.riscv 814 kB/s | 77 kB 00:00 (52-53/53): perl-int 96% [=================== ] 1.7 MB/s | 30 MB 00:00 ETA (52-53/53): perl-int 98% [===================-] 1.8 MB/s | 31 MB 00:00 ETA (52/53): perl-interpreter-5.26.1-408.fc28.1.ris 658 kB/s | 6.7 MB 00:10 (53/53): perl-Encode 99% [===================-] 1.5 MB/s | 31 MB 00:00 ETA (53/53): perl-Encode-2.94-16.fc27.riscv64.rpm 566 kB/s | 1.4 MB 00:02 -------------------------------------------------------------------------------- Total 1.8 MB/s | 31 MB 00:17 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/53 Installing : perl-Exporter-5.72-408.f [===== ] 1/53 Installing : perl-Exporter-5.72-408.f [======= ] 1/53 Installing : perl-Exporter-5.72-408.f [==================== ] 1/53 Installing : perl-Exporter-5.72-408.f [======================== ] 1/53 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/53 Installing : perl-libs-4:5.26.1-408.f [ ] 2/53 Installing : perl-libs-4:5.26.1-408.f [= ] 2/53 Installing : perl-libs-4:5.26.1-408.f [== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/53random: crng init done Installing : perl-libs-4:5.26.1-408.f [===== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/53 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/53 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/53 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/53 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/53 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/53 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/53 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/53 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/53 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/53 Installing : perl-Carp-1.42-408.fc27. [ ] 3/53 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/53 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/53 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/53 Installing : perl-Scalar-List-Utils-3 [ ] 4/53 Installing : perl-Scalar-List-Utils-3 [= ] 4/53 Installing : perl-Scalar-List-Utils-3 [== ] 4/53 Installing : perl-Scalar-List-Utils-3 [=== ] 4/53 Installing : perl-Scalar-List-Utils-3 [===== ] 4/53 Installing : perl-Scalar-List-Utils-3 [======== ] 4/53 Installing : perl-Scalar-List-Utils-3 [========== ] 4/53 Installing : perl-Scalar-List-Utils-3 [============= ] 4/53 Installing : perl-Scalar-List-Utils-3 [================ ] 4/53 Installing : perl-Scalar-List-Utils-3 [================== ] 4/53 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/53 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/53 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/53 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/53 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/53 Installing : perl-Text-ParseWords-3.3 [ ] 5/53 Installing : perl-Text-ParseWords-3.3 [======= ] 5/53 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/53 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/53 Installing : python2-libs-2.7.14-9.fc [ ] 6/53 Installing : python2-libs-2.7.14-9.fc [= ] 6/53 Installing : python2-libs-2.7.14-9.fc [== ] 6/53 Installing : python2-libs-2.7.14-9.fc [=== ] 6/53 Installing : python2-libs-2.7.14-9.fc [==== ] 6/53 Installing : python2-libs-2.7.14-9.fc [===== ] 6/53 Installing : python2-libs-2.7.14-9.fc [====== ] 6/53 Installing : python2-libs-2.7.14-9.fc [======= ] 6/53 Installing : python2-libs-2.7.14-9.fc [======== ] 6/53 Installing : python2-libs-2.7.14-9.fc [========= ] 6/53 Installing : python2-libs-2.7.14-9.fc [========== ] 6/53 Installing : python2-libs-2.7.14-9.fc [=========== ] 6/53 Installing : python2-libs-2.7.14-9.fc [============ ] 6/53 Installing : python2-libs-2.7.14-9.fc [============= ] 6/53 Installing : python2-libs-2.7.14-9.fc [============== ] 6/53 Installing : python2-libs-2.7.14-9.fc [=============== ] 6/53 Installing : python2-libs-2.7.14-9.fc [================ ] 6/53 Installing : python2-libs-2.7.14-9.fc [================= ] 6/53 Installing : python2-libs-2.7.14-9.fc [================== ] 6/53 Installing : python2-libs-2.7.14-9.fc [=================== ] 6/53 Installing : python2-libs-2.7.14-9.fc [==================== ] 6/53 Installing : python2-libs-2.7.14-9.fc [===================== ] 6/53 Installing : python2-libs-2.7.14-9.fc [====================== ] 6/53 Installing : python2-libs-2.7.14-9.fc [======================= ] 6/53 Installing : python2-libs-2.7.14-9.fc [======================== ] 6/53 Installing : python2-libs-2.7.14-9.fc28.riscv64 6/53 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 6/53 Installing : python2-2.7.14-9.fc28.ri [ ] 7/53 Installing : python2-2.7.14-9.fc28.ri [====== ] 7/53 Installing : python2-2.7.14-9.fc28.ri [============== ] 7/53 Installing : python2-2.7.14-9.fc28.ri [==================== ] 7/53 Installing : python2-2.7.14-9.fc28.ri [======================= ] 7/53 Installing : python2-2.7.14-9.fc28.ri [======================== ] 7/53 Installing : python2-2.7.14-9.fc28.riscv64 7/53 Installing : perl-Term-ANSIColor-4.06 [ ] 8/53 Installing : perl-Term-ANSIColor-4.06 [==== ] 8/53 Installing : perl-Term-ANSIColor-4.06 [================== ] 8/53 Installing : perl-Term-ANSIColor-4.06 [======================== ] 8/53 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 8/53 Installing : perl-macros-4:5.26.1-408 [ ] 9/53 Installing : perl-macros-4:5.26.1-408 [======================== ] 9/53 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 9/53 Installing : perl-constant-1.33-408.f [ ] 10/53 Installing : perl-constant-1.33-408.f [======= ] 10/53 Installing : perl-constant-1.33-408.f [======================== ] 10/53 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 10/53 Installing : perl-Errno-1.28-408.fc28 [ ] 11/53 Installing : perl-Errno-1.28-408.fc28 [================= ] 11/53 Installing : perl-Errno-1.28-408.fc28 [======================== ] 11/53 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 11/53 Installing : perl-File-Path-2.15-1.fc [ ] 12/53 Installing : perl-File-Path-2.15-1.fc [==== ] 12/53 Installing : perl-File-Path-2.15-1.fc [======== ] 12/53 Installing : perl-File-Path-2.15-1.fc [==================== ] 12/53 Installing : perl-File-Path-2.15-1.fc [======================== ] 12/53 Installing : perl-File-Path-2.15-1.fc27.noarch 12/53 Installing : perl-PathTools-3.67-408. [ ] 13/53 Installing : perl-PathTools-3.67-408. [== ] 13/53 Installing : perl-PathTools-3.67-408. [=== ] 13/53 Installing : perl-PathTools-3.67-408. [==== ] 13/53 Installing : perl-PathTools-3.67-408. [======= ] 13/53 Installing : perl-PathTools-3.67-408. [========= ] 13/53 Installing : perl-PathTools-3.67-408. [=========== ] 13/53 Installing : perl-PathTools-3.67-408. [============== ] 13/53 Installing : perl-PathTools-3.67-408. [================== ] 13/53 Installing : perl-PathTools-3.67-408. [==================== ] 13/53 Installing : perl-PathTools-3.67-408. [===================== ] 13/53 Installing : perl-PathTools-3.67-408. [====================== ] 13/53 Installing : perl-PathTools-3.67-408. [======================= ] 13/53 Installing : perl-PathTools-3.67-408. [======================== ] 13/53 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 13/53 Installing : perl-threads-shared-1.58 [ ] 14/53 Installing : perl-threads-shared-1.58 [=== ] 14/53 Installing : perl-threads-shared-1.58 [======= ] 14/53 Installing : perl-threads-shared-1.58 [========== ] 14/53 Installing : perl-threads-shared-1.58 [============== ] 14/53 Installing : perl-threads-shared-1.58 [================= ] 14/53 Installing : perl-threads-shared-1.58 [==================== ] 14/53 Installing : perl-threads-shared-1.58 [======================= ] 14/53 Installing : perl-threads-shared-1.58 [======================== ] 14/53 Installing : perl-threads-shared-1.58-1.fc27.riscv64 14/53 Installing : perl-threads-1:2.21-1.fc [ ] 15/53 Installing : perl-threads-1:2.21-1.fc [=== ] 15/53 Installing : perl-threads-1:2.21-1.fc [====== ] 15/53 Installing : perl-threads-1:2.21-1.fc [========= ] 15/53 Installing : perl-threads-1:2.21-1.fc [============= ] 15/53 Installing : perl-threads-1:2.21-1.fc [================ ] 15/53 Installing : perl-threads-1:2.21-1.fc [================== ] 15/53 Installing : perl-threads-1:2.21-1.fc [===================== ] 15/53 Installing : perl-threads-1:2.21-1.fc [====================== ] 15/53 Installing : perl-threads-1:2.21-1.fc [======================= ] 15/53 Installing : perl-threads-1:2.21-1.fc [======================== ] 15/53 Installing : perl-threads-1:2.21-1.fc27.riscv64 15/53 Installing : perl-Text-Tabs+Wrap-2013 [ ] 16/53 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 16/53 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 16/53 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 16/53 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 16/53 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 16/53 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 16/53 Installing : perl-parent-1:0.236-408. [ ] 17/53 Installing : perl-parent-1:0.236-408. [============ ] 17/53 Installing : perl-parent-1:0.236-408. [======================== ] 17/53 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 17/53 Installing : perl-Unicode-Normalize-1 [ ] 18/53 Installing : perl-Unicode-Normalize-1 [= ] 18/53 Installing : perl-Unicode-Normalize-1 [== ] 18/53 Installing : perl-Unicode-Normalize-1 [=== ] 18/53 Installing : perl-Unicode-Normalize-1 [==== ] 18/53 Installing : perl-Unicode-Normalize-1 [===== ] 18/53 Installing : perl-Unicode-Normalize-1 [====== ] 18/53 Installing : perl-Unicode-Normalize-1 [======= ] 18/53 Installing : perl-Unicode-Normalize-1 [======== ] 18/53 Installing : perl-Unicode-Normalize-1 [========= ] 18/53 Installing : perl-Unicode-Normalize-1 [========== ] 18/53 Installing : perl-Unicode-Normalize-1 [============ ] 18/53 Installing : perl-Unicode-Normalize-1 [============= ] 18/53 Installing : perl-Unicode-Normalize-1 [============== ] 18/53 Installing : perl-Unicode-Normalize-1 [=============== ] 18/53 Installing : perl-Unicode-Normalize-1 [================ ] 18/53 Installing : perl-Unicode-Normalize-1 [================= ] 18/53 Installing : perl-Unicode-Normalize-1 [================== ] 18/53 Installing : perl-Unicode-Normalize-1 [=================== ] 18/53 Installing : perl-Unicode-Normalize-1 [==================== ] 18/53 Installing : perl-Unicode-Normalize-1 [===================== ] 18/53 Installing : perl-Unicode-Normalize-1 [====================== ] 18/53 Installing : perl-Unicode-Normalize-1 [======================= ] 18/53 Installing : perl-Unicode-Normalize-1 [======================== ] 18/53 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 18/53 Installing : perl-interpreter-4:5.26. [ ] 19/53 Installing : perl-interpreter-4:5.26. [= ] 19/53 Installing : perl-interpreter-4:5.26. [== ] 19/53 Installing : perl-interpreter-4:5.26. [=== ] 19/53 Installing : perl-interpreter-4:5.26. [==== ] 19/53 Installing : perl-interpreter-4:5.26. [===== ] 19/53 Installing : perl-interpreter-4:5.26. [====== ] 19/53 Installing : perl-interpreter-4:5.26. [======= ] 19/53 Installing : perl-interpreter-4:5.26. [======== ] 19/53 Installing : perl-interpreter-4:5.26. [========= ] 19/53 Installing : perl-interpreter-4:5.26. [========== ] 19/53 Installing : perl-interpreter-4:5.26. [=========== ] 19/53 Installing : perl-interpreter-4:5.26. [============ ] 19/53 Installing : perl-interpreter-4:5.26. [============= ] 19/53 Installing : perl-interpreter-4:5.26. [============== ] 19/53 Installing : perl-interpreter-4:5.26. [=============== ] 19/53 Installing : perl-interpreter-4:5.26. [================ ] 19/53 Installing : perl-interpreter-4:5.26. [================= ] 19/53 Installing : perl-interpreter-4:5.26. [================== ] 19/53 Installing : perl-interpreter-4:5.26. [=================== ] 19/53 Installing : perl-interpreter-4:5.26. [==================== ] 19/53 Installing : perl-interpreter-4:5.26. [===================== ] 19/53 Installing : perl-interpreter-4:5.26. [====================== ] 19/53 Installing : perl-interpreter-4:5.26. [======================= ] 19/53 Installing : perl-interpreter-4:5.26. [======================== ] 19/53 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 19/53 Installing : perl-Socket-4:2.027-1.fc [ ] 20/53 Installing : perl-Socket-4:2.027-1.fc [=== ] 20/53 Installing : perl-Socket-4:2.027-1.fc [======= ] 20/53 Installing : perl-Socket-4:2.027-1.fc [========== ] 20/53 Installing : perl-Socket-4:2.027-1.fc [============== ] 20/53 Installing : perl-Socket-4:2.027-1.fc [================= ] 20/53 Installing : perl-Socket-4:2.027-1.fc [==================== ] 20/53 Installing : perl-Socket-4:2.027-1.fc [===================== ] 20/53 Installing : perl-Socket-4:2.027-1.fc [====================== ] 20/53 Installing : perl-Socket-4:2.027-1.fc [======================= ] 20/53 Installing : perl-Socket-4:2.027-1.fc [======================== ] 20/53 Installing : perl-Socket-4:2.027-1.fc27.riscv64 20/53 Installing : perl-IO-1.38-408.fc28.1. [ ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [= ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [=== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [==== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [===== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [====== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [======= ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [======== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [============== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [================= ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 21/53 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 21/53 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 21/53 Installing : perl-File-Temp-0.230.400 [ ] 22/53 Installing : perl-File-Temp-0.230.400 [=== ] 22/53 Installing : perl-File-Temp-0.230.400 [============ ] 22/53 Installing : perl-File-Temp-0.230.400 [===================== ] 22/53 Installing : perl-File-Temp-0.230.400 [======================== ] 22/53 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 22/53 Installing : perl-Storable-1:2.62-408 [ ] 23/53 Installing : perl-Storable-1:2.62-408 [== ] 23/53 Installing : perl-Storable-1:2.62-408 [==== ] 23/53 Installing : perl-Storable-1:2.62-408 [====== ] 23/53 Installing : perl-Storable-1:2.62-408 [======== ] 23/53 Installing : perl-Storable-1:2.62-408 [========== ] 23/53 Installing : perl-Storable-1:2.62-408 [============ ] 23/53 Installing : perl-Storable-1:2.62-408 [============== ] 23/53 Installing : perl-Storable-1:2.62-408 [================ ] 23/53 Installing : perl-Storable-1:2.62-408 [================== ] 23/53 Installing : perl-Storable-1:2.62-408 [==================== ] 23/53 Installing : perl-Storable-1:2.62-408 [====================== ] 23/53 Installing : perl-Storable-1:2.62-408 [======================== ] 23/53 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 23/53 Installing : perl-MIME-Base64-3.15-40 [ ] 24/53 Installing : perl-MIME-Base64-3.15-40 [= ] 24/53 Installing : perl-MIME-Base64-3.15-40 [== ] 24/53 Installing : perl-MIME-Base64-3.15-40 [========== ] 24/53 Installing : perl-MIME-Base64-3.15-40 [================== ] 24/53 Installing : perl-MIME-Base64-3.15-40 [======================= ] 24/53 Installing : perl-MIME-Base64-3.15-40 [======================== ] 24/53 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 24/53 Installing : perl-Term-Cap-1.17-408.f [ ] 25/53 Installing : perl-Term-Cap-1.17-408.f [==== ] 25/53 Installing : perl-Term-Cap-1.17-408.f [======================== ] 25/53 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 25/53 Installing : perl-Pod-Escapes-1:1.07- [ ] 26/53 Installing : perl-Pod-Escapes-1:1.07- [==== ] 26/53 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 26/53 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 26/53 Installing : perl-Time-Local-1:1.250- [ ] 27/53 Installing : perl-Time-Local-1:1.250- [= ] 27/53 Installing : perl-Time-Local-1:1.250- [===== ] 27/53 Installing : perl-Time-Local-1:1.250- [======== ] 27/53 Installing : perl-Time-Local-1:1.250- [========= ] 27/53 Installing : perl-Time-Local-1:1.250- [================= ] 27/53 Installing : perl-Time-Local-1:1.250- [=================== ] 27/53 Installing : perl-Time-Local-1:1.250- [======================== ] 27/53 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 27/53 Installing : perl-HTTP-Tiny-0.070-408 [ ] 28/53 Installing : perl-HTTP-Tiny-0.070-408 [== ] 28/53 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 28/53 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 28/53 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 28/53 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 28/53 Installing : perl-Pod-Simple-1:3.35-4 [ ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [= ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 29/53 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 29/53 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 29/53 Installing : perl-Encode-4:2.94-16.fc [ ] 30/53 Installing : perl-Encode-4:2.94-16.fc [= ] 30/53 Installing : perl-Encode-4:2.94-16.fc [== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [=== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [==== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [===== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [====== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [======= ] 30/53 Installing : perl-Encode-4:2.94-16.fc [======== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [========= ] 30/53 Installing : perl-Encode-4:2.94-16.fc [========== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [=========== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [============ ] 30/53 Installing : perl-Encode-4:2.94-16.fc [============= ] 30/53 Installing : perl-Encode-4:2.94-16.fc [============== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [=============== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [================ ] 30/53 Installing : perl-Encode-4:2.94-16.fc [================= ] 30/53 Installing : perl-Encode-4:2.94-16.fc [================== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [=================== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [==================== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [===================== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [====================== ] 30/53 Installing : perl-Encode-4:2.94-16.fc [======================= ] 30/53 Installing : perl-Encode-4:2.94-16.fc [======================== ] 30/53 Installing : perl-Encode-4:2.94-16.fc27.riscv64 30/53 Installing : perl-Getopt-Long-1:2.50- [ ] 31/53 Installing : perl-Getopt-Long-1:2.50- [=== ] 31/53 Installing : perl-Getopt-Long-1:2.50- [==== ] 31/53 Installing : perl-Getopt-Long-1:2.50- [===== ] 31/53 Installing : perl-Getopt-Long-1:2.50- [====== ] 31/53 Installing : perl-Getopt-Long-1:2.50- [======= ] 31/53 Installing : perl-Getopt-Long-1:2.50- [========= ] 31/53 Installing : perl-Getopt-Long-1:2.50- [=============== ] 31/53 Installing : perl-Getopt-Long-1:2.50- [===================== ] 31/53 Installing : perl-Getopt-Long-1:2.50- [======================== ] 31/53 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 31/53 Installing : perl-Pod-Usage-4:1.69-40 [ ] 32/53 Installing : perl-Pod-Usage-4:1.69-40 [== ] 32/53 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 32/53 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 32/53 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 32/53 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 32/53 Installing : perl-podlators-4.09-408. [ ] 33/53 Installing : perl-podlators-4.09-408. [= ] 33/53 Installing : perl-podlators-4.09-408. [== ] 33/53 Installing : perl-podlators-4.09-408. [=== ] 33/53 Installing : perl-podlators-4.09-408. [==== ] 33/53 Installing : perl-podlators-4.09-408. [===== ] 33/53 Installing : perl-podlators-4.09-408. [====== ] 33/53 Installing : perl-podlators-4.09-408. [======= ] 33/53 Installing : perl-podlators-4.09-408. [=========== ] 33/53 Installing : perl-podlators-4.09-408. [=============== ] 33/53 Installing : perl-podlators-4.09-408. [================ ] 33/53 Installing : perl-podlators-4.09-408. [================= ] 33/53 Installing : perl-podlators-4.09-408. [===================== ] 33/53 Installing : perl-podlators-4.09-408. [====================== ] 33/53 Installing : perl-podlators-4.09-408. [======================= ] 33/53 Installing : perl-podlators-4.09-408. [======================== ] 33/53 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 33/53 Installing : perl-Pod-Perldoc-3.28-40 [ ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [= ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 34/53 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 34/53 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 34/53 Installing : perl-Thread-Queue-3.12-4 [ ] 35/53 Installing : perl-Thread-Queue-3.12-4 [===== ] 35/53 Installing : perl-Thread-Queue-3.12-4 [====== ] 35/53 Installing : perl-Thread-Queue-3.12-4 [======================== ] 35/53 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 35/53 Installing : perl-Data-Dumper-2.167-4 [ ] 36/53 Installing : perl-Data-Dumper-2.167-4 [=== ] 36/53 Installing : perl-Data-Dumper-2.167-4 [==== ] 36/53 Installing : perl-Data-Dumper-2.167-4 [======== ] 36/53 Installing : perl-Data-Dumper-2.167-4 [============ ] 36/53 Installing : perl-Data-Dumper-2.167-4 [=============== ] 36/53 Installing : perl-Data-Dumper-2.167-4 [=================== ] 36/53 Installing : perl-Data-Dumper-2.167-4 [====================== ] 36/53 Installing : perl-Data-Dumper-2.167-4 [======================= ] 36/53 Installing : perl-Data-Dumper-2.167-4 [======================== ] 36/53 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 36/53 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 37/53 Installing : m4-1.4.18-5.fc28.riscv64 37/53 Running scriptlet: m4-1.4.18-5.fc28.riscv64 37/53 Installing : emacs-filesystem-1:25.3- [ ] 38/53 Installing : emacs-filesystem-1:25.3- [===== ] 38/53 Installing : emacs-filesystem-1:25.3- [============ ] 38/53 Installing : emacs-filesystem-1:25.3- [=================== ] 38/53 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 38/53 Installing : autoconf-2.69-26.fc28.no [ ] 39/53 Installing : autoconf-2.69-26.fc28.no [= ] 39/53 Installing : autoconf-2.69-26.fc28.no [== ] 39/53 Installing : autoconf-2.69-26.fc28.no [=== ] 39/53 Installing : autoconf-2.69-26.fc28.no [==== ] 39/53 Installing : autoconf-2.69-26.fc28.no [===== ] 39/53 Installing : autoconf-2.69-26.fc28.no [====== ] 39/53 Installing : autoconf-2.69-26.fc28.no [======= ] 39/53 Installing : autoconf-2.69-26.fc28.no [======== ] 39/53 Installing : autoconf-2.69-26.fc28.no [========= ] 39/53 Installing : autoconf-2.69-26.fc28.no [========== ] 39/53 Installing : autoconf-2.69-26.fc28.no [=========== ] 39/53 Installing : autoconf-2.69-26.fc28.no [============ ] 39/53 Installing : autoconf-2.69-26.fc28.no [============= ] 39/53 Installing : autoconf-2.69-26.fc28.no [============== ] 39/53 Installing : autoconf-2.69-26.fc28.no [=============== ] 39/53 Installing : autoconf-2.69-26.fc28.no [================ ] 39/53 Installing : autoconf-2.69-26.fc28.no [================= ] 39/53 Installing : autoconf-2.69-26.fc28.no [================== ] 39/53 Installing : autoconf-2.69-26.fc28.no [=================== ] 39/53 Installing : autoconf-2.69-26.fc28.no [==================== ] 39/53 Installing : autoconf-2.69-26.fc28.no [===================== ] 39/53 Installing : autoconf-2.69-26.fc28.no [====================== ] 39/53 Installing : autoconf-2.69-26.fc28.no [======================= ] 39/53 Installing : autoconf-2.69-26.fc28.no [======================== ] 39/53 Installing : autoconf-2.69-26.fc28.noarch 39/53 Running scriptlet: autoconf-2.69-26.fc28.noarch 39/53 Installing : automake-1.15.1-3.fc28.n [ ] 40/53 Installing : automake-1.15.1-3.fc28.n [= ] 40/53 Installing : automake-1.15.1-3.fc28.n [== ] 40/53 Installing : automake-1.15.1-3.fc28.n [=== ] 40/53 Installing : automake-1.15.1-3.fc28.n [==== ] 40/53 Installing : automake-1.15.1-3.fc28.n [===== ] 40/53 Installing : automake-1.15.1-3.fc28.n [====== ] 40/53 Installing : automake-1.15.1-3.fc28.n [======= ] 40/53 Installing : automake-1.15.1-3.fc28.n [======== ] 40/53 Installing : automake-1.15.1-3.fc28.n [========= ] 40/53 Installing : automake-1.15.1-3.fc28.n [========== ] 40/53 Installing : automake-1.15.1-3.fc28.n [=========== ] 40/53 Installing : automake-1.15.1-3.fc28.n [============ ] 40/53 Installing : automake-1.15.1-3.fc28.n [============= ] 40/53 Installing : automake-1.15.1-3.fc28.n [============== ] 40/53 Installing : automake-1.15.1-3.fc28.n [=============== ] 40/53 Installing : automake-1.15.1-3.fc28.n [================ ] 40/53 Installing : automake-1.15.1-3.fc28.n [================= ] 40/53 Installing : automake-1.15.1-3.fc28.n [================== ] 40/53 Installing : automake-1.15.1-3.fc28.n [=================== ] 40/53 Installing : automake-1.15.1-3.fc28.n [==================== ] 40/53 Installing : automake-1.15.1-3.fc28.n [===================== ] 40/53 Installing : automake-1.15.1-3.fc28.n [====================== ] 40/53 Installing : automake-1.15.1-3.fc28.n [======================= ] 40/53 Installing : automake-1.15.1-3.fc28.n [======================== ] 40/53 Installing : automake-1.15.1-3.fc28.noarch 40/53 Running scriptlet: automake-1.15.1-3.fc28.noarch 40/53 Installing : libpkgconf-1.4.1-1.fc27. [ ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 41/53 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 41/53 Installing : libpkgconf-1.4.1-1.fc27.riscv64 41/53 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 41/53 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 42/53 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 42/53 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 42/53 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 42/53 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 42/53 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 42/53 Installing : pkgconf-1.4.1-1.fc27.riscv64 42/53 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 43/53 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 43/53 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 43/53 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 43/53 Installing : pkgconf-pkg-config-1.4.1 [ ] 44/53 Installing : pkgconf-pkg-config-1.4.1 [==== ] 44/53 Installing : pkgconf-pkg-config-1.4.1 [===== ] 44/53 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 44/53 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 44/53 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 44/53 Installing : xorg-x11-proto-devel-7.7 [ ] 45/53 Installing : xorg-x11-proto-devel-7.7 [= ] 45/53 Installing : xorg-x11-proto-devel-7.7 [== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [=== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [==== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [===== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [====== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [======= ] 45/53 Installing : xorg-x11-proto-devel-7.7 [======== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [========= ] 45/53 Installing : xorg-x11-proto-devel-7.7 [========== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [=========== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [============ ] 45/53 Installing : xorg-x11-proto-devel-7.7 [============= ] 45/53 Installing : xorg-x11-proto-devel-7.7 [============== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [=============== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [================ ] 45/53 Installing : xorg-x11-proto-devel-7.7 [================= ] 45/53 Installing : xorg-x11-proto-devel-7.7 [================== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [=================== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [==================== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [===================== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [====================== ] 45/53 Installing : xorg-x11-proto-devel-7.7 [======================= ] 45/53 Installing : xorg-x11-proto-devel-7.7 [======================== ] 45/53 Installing : xorg-x11-proto-devel-7.7-20.fc25.noarch 45/53 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 46/53 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 46/53 Installing : tar-2:1.29-7.fc27.riscv64 46/53 Running scriptlet: tar-2:1.29-7.fc27.riscv64 46/53 Installing : libtool-2.4.6-21.fc27.ri [ ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [= ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [=== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [==== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [===== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [====== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [======= ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [======== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [========= ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [========== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [============ ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [============= ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [============== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [================ ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [================= ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [================== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 47/53 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 47/53 Installing : libtool-2.4.6-21.fc27.riscv64 47/53 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 47/53 Installing : libXau-1.0.8-6.fc28.risc [ ] 48/53 Installing : libXau-1.0.8-6.fc28.risc [========= ] 48/53 Installing : libXau-1.0.8-6.fc28.risc [============= ] 48/53 Installing : libXau-1.0.8-6.fc28.risc [====================== ] 48/53 Installing : libXau-1.0.8-6.fc28.risc [======================== ] 48/53 Installing : libXau-1.0.8-6.fc28.riscv64 48/53 Running scriptlet: libXau-1.0.8-6.fc28.riscv64 48/53 Installing : libXau-devel-1.0.8-6.fc2 [ ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [=========== ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [============ ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [============= ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [==================== ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [===================== ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [====================== ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [======================= ] 49/53 Installing : libXau-devel-1.0.8-6.fc2 [======================== ] 49/53 Installing : libXau-devel-1.0.8-6.fc28.riscv64 49/53 Installing : xorg-x11-util-macros-1.1 [ ] 50/53 Installing : xorg-x11-util-macros-1.1 [===== ] 50/53 Installing : xorg-x11-util-macros-1.1 [========== ] 50/53 Installing : xorg-x11-util-macros-1.1 [=========== ] 50/53 Installing : xorg-x11-util-macros-1.1 [================ ] 50/53 Installing : xorg-x11-util-macros-1.1 [===================== ] 50/53 Installing : xorg-x11-util-macros-1.1 [====================== ] 50/53 Installing : xorg-x11-util-macros-1.1 [======================== ] 50/53 Installing : xorg-x11-util-macros-1.19.0-5.fc24.noarch 50/53 Installing : xcb-proto-1.12-6.fc28.no [ ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [= ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [=== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [==== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [===== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [====== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [======= ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [======== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [========= ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [========== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [=========== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [============ ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [============= ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [============== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [=============== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [================ ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [================= ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [================== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [=================== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [==================== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [===================== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [====================== ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [======================= ] 51/53 Installing : xcb-proto-1.12-6.fc28.no [======================== ] 51/53 Installing : xcb-proto-1.12-6.fc28.noarch 51/53 Installing : libxslt-1.1.28-13.fc28.r [ ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [= ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [=== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [==== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [===== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [====== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [======= ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [======== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [========= ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [========== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [=========== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [============ ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [============= ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [============== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [=============== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [================ ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [================= ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [================== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [=================== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [==================== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [===================== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [====================== ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [======================= ] 52/53 Installing : libxslt-1.1.28-13.fc28.r [======================== ] 52/53 Installing : libxslt-1.1.28-13.fc28.riscv64 52/53 Running scriptlet: libxslt-1.1.28-13.fc28.riscv64 52/53 Installing : doxygen-1:1.8.12-1.fc27. [ ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [= ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [=== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [==== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [===== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [====== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [======= ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [======== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [========= ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [========== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [=========== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [============ ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [============= ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [============== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [=============== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [================ ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [================= ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [================== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [=================== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [==================== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [===================== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [====================== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [======================= ] 53/53 Installing : doxygen-1:1.8.12-1.fc27. [======================== ] 53/53 Installing : doxygen-1:1.8.12-1.fc27.riscv64 53/53 Running scriptlet: doxygen-1:1.8.12-1.fc27.riscv64 53/53 Verifying : doxygen-1:1.8.12-1.fc27.riscv64 1/53 Verifying : libXau-devel-1.0.8-6.fc28.riscv64 2/53 Verifying : xorg-x11-util-macros-1.19.0-5.fc24.noarch 3/53 Verifying : libXau-1.0.8-6.fc28.riscv64 4/53 Verifying : libtool-2.4.6-21.fc27.riscv64 5/53 Verifying : tar-2:1.29-7.fc27.riscv64 6/53 Verifying : libxslt-1.1.28-13.fc28.riscv64 7/53 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 8/53 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 9/53 Verifying : pkgconf-1.4.1-1.fc27.riscv64 10/53 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 11/53 Verifying : xcb-proto-1.12-6.fc28.noarch 12/53 Verifying : python2-2.7.14-9.fc28.riscv64 13/53 Verifying : python2-libs-2.7.14-9.fc28.riscv64 14/53 Verifying : autoconf-2.69-26.fc28.noarch 15/53 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 16/53 Verifying : automake-1.15.1-3.fc28.noarch 17/53 Verifying : xorg-x11-proto-devel-7.7-20.fc25.noarch 18/53 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 19/53 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 20/53 Verifying : perl-File-Path-2.15-1.fc27.noarch 21/53 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 22/53 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 23/53 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 24/53 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 25/53 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 26/53 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 27/53 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 28/53 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 29/53 Verifying : perl-threads-1:2.21-1.fc27.riscv64 30/53 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 31/53 Verifying : m4-1.4.18-5.fc28.riscv64 32/53 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 33/53 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 34/53 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 35/53 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 36/53 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 37/53 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 38/53 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 39/53 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 40/53 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 41/53 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 42/53 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 43/53 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 44/53 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 45/53 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 46/53 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 47/53 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 48/53 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 49/53 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 50/53 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 51/53 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 52/53 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 53/53 Installed: doxygen.riscv64 1:1.8.12-1.fc27 libXau-devel.riscv64 1.0.8-6.fc28 libtool.riscv64 2.4.6-21.fc27 libxslt.riscv64 1.1.28-13.fc28 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python2.riscv64 2.7.14-9.fc28 xcb-proto.noarch 1.12-6.fc28 xorg-x11-util-macros.noarch 1.19.0-5.fc24 autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 libXau.riscv64 1.0.8-6.fc28 libpkgconf.riscv64 1.4.1-1.fc27 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 python2-libs.riscv64 2.7.14-9.fc28 tar.riscv64 2:1.29-7.fc27 xorg-x11-proto-devel.noarch 7.7-20.fc25 Complete! + dnf -y update --best Last metadata expiration check: 0:06:29 ago on Thu Feb 22 12:30:37 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:06:52 ago on Thu Feb 22 12:30:37 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group grep info gzip bash cpio tar bzip2 shadow-utils redhat-rpm-config make fedora-release findutils rpm-build coreutils gawk xz patch sed util-linux which diffutils unzip ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 26 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/26): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/26): redhat-rpm-config-96-1.fc28.0.riscv64.n 651 kB/s | 75 kB 00:00 (2-3/26): make-4.2.1 1% [ ] 1.3 MB/s | 235 kB 00:08 ETA (2/26): nim-srpm-macros-1-1.fc28.noarch.rpm 294 kB/s | 7.6 kB 00:00 (3-4/26): make-4.2.1 2% [ ] 1.3 MB/s | 274 kB 00:08 ETA (3/26): ocaml-srpm-macros-5-2.fc27.noarch.rpm 279 kB/s | 7.8 kB 00:00 (4-5/26): make-4.2.1 2% [- ] 1.3 MB/s | 314 kB 00:08 ETA (4/26): openblas-srpm-macros-2-2.fc27.noarch.rp 217 kB/s | 6.6 kB 00:00 (5-6/26): make-4.2.1 2% [- ] 1.3 MB/s | 353 kB 00:09 ETA (5/26): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 268 kB/s | 9.0 kB 00:00 (6-7/26): make-4.2.1 3% [- ] 1.2 MB/s | 394 kB 00:09 ETA (6/26): rust-srpm-macros-5-1.fc28.noarch.rpm 267 kB/s | 8.0 kB 00:00 (7-8/26): make-4.2.1 3% [- ] 1.2 MB/s | 434 kB 00:09 ETA (7/26): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 775 kB/s | 235 kB 00:00 (8-9/26): make-4.2.1 9% [=- ] 1.3 MB/s | 1.1 MB 00:08 ETA (8/26): make-4.2.1-6.fc27.riscv64.rpm 508 kB/s | 486 kB 00:00 (9-10/26): zstd-1.3. 11% [== ] 1.3 MB/s | 1.4 MB 00:07 ETA (9/26): which-2.21-4.fc28.riscv64.rpm 614 kB/s | 65 kB 00:00 (10-11/26): diffutil 13% [==- ] 1.3 MB/s | 1.6 MB 00:07 ETA (10/26): diffutils-3.6-3.fc28.riscv64.rpm 458 kB/s | 577 kB 00:01 (11-12/26): zstd-1.3 14% [==- ] 1.3 MB/s | 1.6 MB 00:07 ETA (11-13/26): unzip-6. 20% [==== ] 1.4 MB/s | 2.4 MB 00:06 ETA (11/26): patch-2.7.5-6.fc27.riscv64.rpm 560 kB/s | 270 kB 00:00 (12-13/26): zstd-1.3 20% [==== ] 1.3 MB/s | 2.4 MB 00:06 ETA (12/26): unzip-6.0-36.fc28.riscv64.rpm 682 kB/s | 398 kB 00:00 (13-14/26): zstd-1.3 23% [====- ] 1.4 MB/s | 2.8 MB 00:06 ETA (13/26): xz-5.2.3-5.fc28.riscv64.rpm 560 kB/s | 212 kB 00:00 (14-15/26): bzip2-1. 26% [===== ] 1.4 MB/s | 3.1 MB 00:06 ETA (14/26): bzip2-1.0.6-24.fc28.riscv64.rpm 476 kB/s | 81 kB 00:00 (15/26): zstd-1.3.3- 26% [===== ] 1.4 MB/s | 3.1 MB 00:06 ETA (15/26): file-5.32-3.fc28.riscv64.rpm 678 kB/s | 81 kB 00:00 (16-17/26): elfutils 28% [=====- ] 1.4 MB/s | 3.3 MB 00:06 ETA (16-18/26): zstd-1.3 34% [======- ] 1.4 MB/s | 4.1 MB 00:05 ETA (16/26): zstd-1.3.3-1.fc27.riscv64.rpm 571 kB/s | 1.1 MB 00:02 (17-18/26): binutils 37% [=======- ] 1.4 MB/s | 4.4 MB 00:05 ETA (17/26): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 291 kB/s | 7.5 kB 00:00 (18-19/26): binutils 38% [=======- ] 1.4 MB/s | 4.5 MB 00:05 ETA (18/26): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 293 kB/s | 8.2 kB 00:00 (19-20/26): binutils 38% [=======- ] 1.4 MB/s | 4.5 MB 00:05 ETA (19/26): gnat-srpm-macros-4-5.fc28.noarch.rpm 281 kB/s | 8.8 kB 00:00 (20-21/26): binutils 38% [=======- ] 1.4 MB/s | 4.5 MB 00:05 ETA (20/26): go-srpm-macros-2-11.fc28.noarch.rpm 273 kB/s | 8.4 kB 00:00 (21-22/26): elfutils 39% [=======- ] 1.4 MB/s | 4.6 MB 00:05 ETA (21/26): perl-srpm-macros-1-26.fc28.noarch.rpm 330 kB/s | 9.7 kB 00:00 (22-23/26): elfutils 39% [=======- ] 1.4 MB/s | 4.6 MB 00:05 ETA (22/26): python-srpm-macros-3-26.fc28.noarch.rp 313 kB/s | 10 kB 00:00 (23-24/26): elfutils 39% [=======- ] 1.4 MB/s | 4.7 MB 00:05 ETA (23/26): dwz-0.12-5.fc28.riscv64.rpm 786 kB/s | 108 kB 00:00 (24-25/26): elfutils 42% [========- ] 1.4 MB/s | 5.0 MB 00:04 ETA (24/26): elfutils-0.170-4.fc28.riscv64.rpm 527 kB/s | 791 kB 00:01 (25-26/26): binutils 45% [========= ] 1.4 MB/s | 5.3 MB 00:04 ETA (25/26): zip-3.0-20.fc28.riscv64.rpm 704 kB/s | 271 kB 00:00 (26/26): binutils-2. 48% [=========- ] 1.4 MB/s | 5.6 MB 00:04 ETA (26/26): binutils-2. 54% [==========- ] 1.5 MB/s | 6.4 MB 00:03 ETA (26/26): binutils-2. 61% [============ ] 1.5 MB/s | 7.2 MB 00:02 ETA (26/26): binutils-2. 68% [=============- ] 1.6 MB/s | 8.0 MB 00:02 ETA (26/26): binutils-2. 74% [==============- ] 1.7 MB/s | 8.7 MB 00:01 ETA (26/26): binutils-2. 81% [================ ] 1.7 MB/s | 9.5 MB 00:01 ETA (26/26): binutils-2. 87% [=================- ] 1.8 MB/s | 10 MB 00:00 ETA (26/26): binutils-2. 94% [==================- ] 1.8 MB/s | 11 MB 00:00 ETA (26/26): binutils-2.30-1.fc28.riscv64.rpm 1.4 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.6 MB/s | 12 MB 00:07 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 1/26 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv64 2/26 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 3/26 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 4/26 Installing : python-srpm-macros-3-26. [ ] 5/26 Installing : python-srpm-macros-3-26. [======================= ] 5/26 Installing : python-srpm-macros-3-26.fc28.noarch 5/26 Installing : perl-srpm-macros-1-26.fc [ ] 6/26 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/26 Installing : perl-srpm-macros-1-26.fc28.noarch 6/26 Installing : go-srpm-macros-2-11.fc28 [ ] 7/26 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/26 Installing : go-srpm-macros-2-11.fc28.noarch 7/26 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/26 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/26 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/26 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/26 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/26 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/26 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/26 Installing : binutils-2.30-1.fc28.ris [ ] 11/26 Installing : binutils-2.30-1.fc28.ris [= ] 11/26 Installing : binutils-2.30-1.fc28.ris [== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======== ] 11/26 Installing : binutils-2.30-1.fc28.ris [========= ] 11/26 Installing : binutils-2.30-1.fc28.ris [========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [============ ] 11/26 Installing : binutils-2.30-1.fc28.ris [============= ] 11/26 Installing : binutils-2.30-1.fc28.ris [============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [================ ] 11/26 Installing : binutils-2.30-1.fc28.ris [================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/26 Installing : binutils-2.30-1.fc28.riscv64 11/26 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/26 Installing : elfutils-0.170-4.fc28.ri [ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/26 Installing : elfutils-0.170-4.fc28.riscv64 12/26 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.riscv64 13/26 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 14/26 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv64 15/26 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv64 16/26 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/26 Installing : rust-srpm-macros-5-1.fc28.noarch 17/26 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/26 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/26 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/26 Installing : openblas-srpm-macros-2-2 [ ] 19/26 Installing : openblas-srpm-macros-2-2 [================ ] 19/26 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/26 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/26 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/26 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/26 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/26 Installing : nim-srpm-macros-1-1.fc28.noarch 21/26 Installing : redhat-rpm-config-96-1.f [ ] 22/26 Installing : redhat-rpm-config-96-1.f [== ] 22/26 Installing : redhat-rpm-config-96-1.f [=== ] 22/26 Installing : redhat-rpm-config-96-1.f [========= ] 22/26 Installing : redhat-rpm-config-96-1.f [=========== ] 22/26 Installing : redhat-rpm-config-96-1.f [================= ] 22/26 Installing : redhat-rpm-config-96-1.f [================== ] 22/26 Installing : redhat-rpm-config-96-1.f [=================== ] 22/26 Installing : redhat-rpm-config-96-1.f [===================== ] 22/26 Installing : redhat-rpm-config-96-1.f [====================== ] 22/26 Installing : redhat-rpm-config-96-1.f [======================== ] 22/26 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/26 Installing : diffutils-3.6-3.fc28.ris [ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/26 Installing : diffutils-3.6-3.fc28.riscv64 23/26 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/26 Installing : rpm-build-4.14.1-6.fc28. [ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [========= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 24/26 Installing : which-2.21-4.fc28.riscv6 [ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [===== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=========== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=============== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================= ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [======================== ] 25/26 Installing : which-2.21-4.fc28.riscv64 25/26 Running scriptlet: which-2.21-4.fc28.riscv64 25/26 Installing : make-1:4.2.1-6.fc27.risc [ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 26/26 Installing : make-1:4.2.1-6.fc27.riscv64 26/26 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 26/26 Verifying : diffutils-3.6-3.fc28.riscv64 1/26 Verifying : make-1:4.2.1-6.fc27.riscv64 2/26 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/26 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/26 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/26 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/26 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/26 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/26 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/26 Verifying : zstd-1.3.3-1.fc27.riscv64 10/26 Verifying : which-2.21-4.fc28.riscv64 11/26 Verifying : patch-2.7.5-6.fc27.riscv64 12/26 Verifying : unzip-6.0-36.fc28.riscv64 13/26 Verifying : xz-5.2.3-5.fc28.riscv64 14/26 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/26 Verifying : elfutils-0.170-4.fc28.riscv64 16/26 Verifying : file-5.32-3.fc28.riscv64 17/26 Verifying : binutils-2.30-1.fc28.riscv64 18/26 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 19/26 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 20/26 Verifying : gnat-srpm-macros-4-5.fc28.noarch 21/26 Verifying : go-srpm-macros-2-11.fc28.noarch 22/26 Verifying : perl-srpm-macros-1-26.fc28.noarch 23/26 Verifying : python-srpm-macros-3-26.fc28.noarch 24/26 Verifying : dwz-0.12-5.fc28.riscv64 25/26 Verifying : zip-3.0-20.fc28.riscv64 26/26 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:08:51 ago on Thu Feb 22 12:30:37 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 530 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 503 kB/s | 36 kB 00:05 ETA (2-4/4): kernel-head 33% [======- ] 639 kB/s | 868 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 785 kB/s | 442 kB 00:00 (3-4/4): kernel-head 51% [========== ] 703 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 87% [================= ] 843 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 919 kB/s | 1.0 MB 00:01 (4/4): kernel-header 96% [=================== ] 855 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 949 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off