OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 13:47:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libtdb-1.3.11-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libtdb.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.1 MB/s | 969 kB 00:03 ETA Local RPMS 15% [=== ] 3.1 MB/s | 1.8 MB 00:03 ETA Local RPMS 25% [===== ] 3.1 MB/s | 2.9 MB 00:02 ETA Local RPMS 33% [======- ] 3.2 MB/s | 3.9 MB 00:02 ETA Local RPMS 43% [========- ] 3.2 MB/s | 4.9 MB 00:02 ETA Local RPMS 52% [========== ] 3.2 MB/s | 6.0 MB 00:01 ETA Local RPMS 58% [===========- ] 3.0 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 3.0 MB/s | 7.7 MB 00:01 ETA Local RPMS 76% [=============== ] 3.0 MB/s | 8.7 MB 00:00 ETA Local RPMS 85% [================= ] 3.0 MB/s | 9.7 MB 00:00 ETA Local RPMS 93% [==================- ] 3.1 MB/s | 11 MB 00:00 ETA Local RPMS 2.5 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:21 ago on Wed Feb 21 13:47:33 2018. sh: /usr/bin/python: No such file or directory sh: /usr/bin/python: No such file or directory Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k docbook-style-xsl noarch 1.79.2-6.fc28 local 1.6 M libxslt riscv64 1.1.28-13.fc28 local 506 k python2-devel riscv64 2.7.14-9.fc28 local 410 k python3-devel riscv64 3.6.4-14.0.fc28 local 862 k Installing dependencies: docbook-dtds noarch 1.0-68.fc28 local 376 k dwz riscv64 0.12-5.fc28 local 108 k emacs-filesystem noarch 1:25.3-5.fc28 local 67 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k m4 riscv64 1.4.18-5.fc28 local 369 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M python2-rpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-rpm-macros noarch 3-26.fc28 local 10 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k sgml-common noarch 0.6.3-47.fc28 local 59 k unzip riscv64 6.0-36.fc28 local 398 k xml-common noarch 0.6.3-47.fc28 local 30 k zip riscv64 3.0-20.fc28 local 271 k Transaction Summary ================================================================================ Install 70 Packages Total download size: 29 M Installed size: 116 M Downloading Packages: (1/70): autoconf-2.6 0% [ ] --- B/s | 0 B --:-- ETA (1/70): emacs-filesystem-25.3-5.fc28.noarch.rpm 610 kB/s | 67 kB 00:00 (2-3/70): autoconf-2 0% [ ] 1.6 MB/s | 227 kB 00:18 ETA (2/70): xml-common-0.6.3-47.fc28.noarch.rpm 702 kB/s | 30 kB 00:00 (3-4/70): autoconf-2 1% [ ] 1.6 MB/s | 321 kB 00:18 ETA (3-5/70): libxslt-1. 3% [- ] 1.7 MB/s | 1.2 MB 00:16 ETA (3/70): libxslt-1.1.28-13.fc28.riscv64.rpm 924 kB/s | 506 kB 00:00 (4-5/70): docbook-st 6% [= ] 1.7 MB/s | 1.8 MB 00:16 ETA (4/70): autoconf-2.69-26.fc28.noarch.rpm 721 kB/s | 709 kB 00:00 (5-6/70): python2-de 7% [= ] 1.7 MB/s | 2.1 MB 00:16 ETA (5/70): python2-2.7.14-9.fc28.riscv64.rpm 836 kB/s | 107 kB 00:00 (6-7/70): python2-de 8% [=- ] 1.7 MB/s | 2.4 MB 00:15 ETA (6/70): python2-devel-2.7.14-9.fc28.riscv64.rpm 668 kB/s | 410 kB 00:00 (7-8/70): python2-li 10% [== ] 1.7 MB/s | 3.0 MB 00:15 ETA (7-9/70): python2-li 12% [==- ] 1.8 MB/s | 3.8 MB 00:14 ETA (7/70): docbook-style-xsl-1.79.2-6.fc28.noarch. 746 kB/s | 1.6 MB 00:02 (8-9/70): python2-li 15% [=== ] 1.8 MB/s | 4.7 MB 00:13 ETA (8/70): python-rpm-macros-3-26.fc28.noarch.rpm 417 kB/s | 11 kB 00:00 (9-10/70): python2-l 16% [=== ] 1.8 MB/s | 4.7 MB 00:13 ETA (9/70): python3-rpm-generators-5-1.fc28.noarch. 550 kB/s | 23 kB 00:00 (10-11/70): python2- 16% [=== ] 1.8 MB/s | 4.8 MB 00:13 ETA (10/70): python3-devel-3.6.4-14.0.fc28.riscv64. 695 kB/s | 862 kB 00:01 (11-12/70): python3- 18% [===- ] 1.8 MB/s | 5.5 MB 00:13 ETA (11/70): python3-rpm-macros-3-26.fc28.noarch.rp 384 kB/s | 10 kB 00:00 (12-13/70): python3- 18% [===- ] 1.8 MB/s | 5.6 MB 00:13 ETA (12/70): redhat-rpm-config-96-1.fc28.0.riscv64. 826 kB/s | 75 kB 00:00 (13-14/70): python3- 19% [===- ] 1.8 MB/s | 5.8 MB 00:13 ETA (13/70): nim-srpm-macros-1-1.fc28.noarch.rpm 307 kB/s | 7.6 kB 00:00 (14-15/70): python3- 19% [===- ] 1.8 MB/s | 5.8 MB 00:13 ETA (14/70): ocaml-srpm-macros-5-2.fc27.noarch.rpm 297 kB/s | 7.8 kB 00:00 (15-16/70): python3- 19% [===- ] 1.8 MB/s | 5.9 MB 00:13 ETA (15/70): openblas-srpm-macros-2-2.fc27.noarch.r 267 kB/s | 6.6 kB 00:00 (16-17/70): python3- 19% [===- ] 1.8 MB/s | 5.9 MB 00:13 ETA (16/70): qt5-srpm-macros-5.10.0-1.fc28.noarch.r 331 kB/s | 9.0 kB 00:00 (17-18/70): python3- 20% [==== ] 1.7 MB/s | 5.9 MB 00:13 ETA (17/70): rust-srpm-macros-5-1.fc28.noarch.rpm 321 kB/s | 8.0 kB 00:00 (18-19/70): python3- 20% [==== ] 1.7 MB/s | 6.0 MB 00:13 ETA (18/70): file-5.32-3.fc28.riscv64.rpm 631 kB/s | 81 kB 00:00 (19-20/70): python3- 21% [==== ] 1.8 MB/s | 6.3 MB 00:13 ETA (19/70): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 499 kB/s | 14 kB 00:00 (20-21/70): python3- 21% [==== ] 1.7 MB/s | 6.3 MB 00:13 ETA (20/70): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 554 kB/s | 15 kB 00:00 (21-22/70): python3- 21% [==== ] 1.7 MB/s | 6.4 MB 00:13 ETA (21/70): python3-setuptools-38.4.0-3.fc28.noarc 527 kB/s | 620 kB 00:01 (22-23/70): pkgconf- 22% [==== ] 1.7 MB/s | 6.5 MB 00:13 ETA (22/70): pkgconf-1.4.1-1.fc27.riscv64.rpm 243 kB/s | 35 kB 00:00 (23/70): python2-lib 22% [==== ] 1.7 MB/s | 6.5 MB 00:13 ETA (23/70): python2-rpm-macros-3-26.fc28.noarch.rp 394 kB/s | 10 kB 00:00 (24-25/70): libpkgco 22% [==== ] 1.7 MB/s | 6.6 MB 00:13 ETA (24/70): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 293 kB/s | 7.5 kB 00:00 (25-26/70): libpkgco 22% [==== ] 1.7 MB/s | 6.6 MB 00:13 ETA (25/70): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 322 kB/s | 8.2 kB 00:00 (26-27/70): python2- 22% [====- ] 1.7 MB/s | 6.6 MB 00:13 ETA (26/70): gnat-srpm-macros-4-5.fc28.noarch.rpm 357 kB/s | 8.8 kB 00:00 (27-28/70): python2- 22% [====- ] 1.7 MB/s | 6.7 MB 00:13 ETA (27/70): libpkgconf-1.4.1-1.fc27.riscv64.rpm 292 kB/s | 74 kB 00:00 (28-29/70): python2- 22% [====- ] 1.7 MB/s | 6.7 MB 00:13 ETA (28/70): go-srpm-macros-2-11.fc28.noarch.rpm 164 kB/s | 8.4 kB 00:00 (29/70): python2-lib 22% [====- ] 1.7 MB/s | 6.7 MB 00:13 ETA (29/70): perl-srpm-macros-1-26.fc28.noarch.rpm 207 kB/s | 9.7 kB 00:00 (30-31/70): python2- 22% [====- ] 1.6 MB/s | 6.7 MB 00:13 ETA (30/70): python-srpm-macros-3-26.fc28.noarch.rp 227 kB/s | 10 kB 00:00 (31/70): python2-lib 22% [====- ] 1.6 MB/s | 6.7 MB 00:13 ETA (31/70): dwz-0.12-5.fc28.riscv64.rpm 731 kB/s | 108 kB 00:00 (32-33/70): python2- 23% [====- ] 1.6 MB/s | 7.1 MB 00:13 ETA (32/70): zip-3.0-20.fc28.riscv64.rpm 797 kB/s | 271 kB 00:00 (33-34/70): python2- 25% [===== ] 1.7 MB/s | 7.5 MB 00:13 ETA (33/70): sgml-common-0.6.3-47.fc28.noarch.rpm 735 kB/s | 59 kB 00:00 (34-35/70): python2- 26% [===== ] 1.7 MB/s | 7.7 MB 00:13 ETA (34/70): perl-Carp-1.42-408.fc27.0.riscv64.noar 734 kB/s | 84 kB 00:00 (35-36/70): python2- 27% [===== ] 1.7 MB/s | 8.0 MB 00:12 ETA (35/70): docbook-dtds-1.0-68.fc28.noarch.rpm 656 kB/s | 376 kB 00:00 (36-37/70): perl-Exp 27% [=====- ] 1.7 MB/s | 8.2 MB 00:12 ETA (36/70): perl-Exporter-5.72-408.fc27.0.riscv64. 462 kB/s | 87 kB 00:00 (37-38/70): perl-Fil 27% [=====- ] 1.7 MB/s | 8.3 MB 00:12 ETA (37/70): perl-File-Path-2.15-1.fc27.noarch.rpm 349 kB/s | 37 kB 00:00 (38-39/70): perl-Get 28% [=====- ] 1.6 MB/s | 8.3 MB 00:12 ETA (38/70): perl-Getopt-Long-2.50-3.fc27.noarch.rp 520 kB/s | 61 kB 00:00 (39-40/70): perl-Tex 28% [=====- ] 1.6 MB/s | 8.4 MB 00:12 ETA (39/70): perl-Text-ParseWords-3.30-408.fc27.0.r 532 kB/s | 73 kB 00:00 (40-41/70): perl-con 28% [=====- ] 1.6 MB/s | 8.5 MB 00:12 ETA (40/70): perl-constant-1.33-408.fc27.0.riscv64. 543 kB/s | 79 kB 00:00 (41-42/70): m4-1.4.1 29% [=====- ] 1.6 MB/s | 8.7 MB 00:12 ETA (41/70): perl-Data-Dumper-2.167-408.fc27.0.risc 820 kB/s | 149 kB 00:00 (42-43/70): m4-1.4.1 30% [====== ] 1.7 MB/s | 9.1 MB 00:12 ETA (42/70): perl-Errno-1.28-408.fc28.1.riscv64.ris 795 kB/s | 73 kB 00:00 (43-44/70): m4-1.4.1 31% [====== ] 1.7 MB/s | 9.3 MB 00:12 ETA (43/70): m4-1.4.18-5.fc28.riscv64.rpm 651 kB/s | 369 kB 00:00 (44-45/70): perl-lib 32% [======- ] 1.7 MB/s | 9.6 MB 00:11 ETA (44-46/70): perl-int 35% [======= ] 1.7 MB/s | 10 MB 00:11 ETA (44-46/70): perl-int 38% [=======- ] 1.8 MB/s | 11 MB 00:10 ETA (44-46/70): perl-int 41% [======== ] 1.9 MB/s | 12 MB 00:09 ETA (44-46/70): python2- 44% [========- ] 1.9 MB/s | 13 MB 00:08 ETA (44-46/70): python2- 47% [========= ] 2.0 MB/s | 14 MB 00:07 ETA (44-46/70): python2- 50% [========== ] 2.1 MB/s | 15 MB 00:07 ETA (44-46/70): perl-lib 53% [==========- ] 2.1 MB/s | 16 MB 00:06 ETA (44-46/70): perl-lib 56% [=========== ] 2.2 MB/s | 17 MB 00:05 ETA (44-46/70): perl-lib 59% [===========- ] 2.2 MB/s | 18 MB 00:05 ETA (44-46/70): perl-lib 62% [============- ] 2.3 MB/s | 18 MB 00:04 ETA (44/70): perl-libs-5.26.1-408.fc28.1.riscv64.ri 888 kB/s | 3.3 MB 00:03 (45-46/70): perl-int 65% [============= ] 2.1 MB/s | 19 MB 00:04 ETA (45/70): perl-IO-1.38-408.fc28.1.riscv64.riscv6 833 kB/s | 176 kB 00:00 (46-47/70): perl-int 67% [============= ] 2.1 MB/s | 20 MB 00:04 ETA (46/70): perl-PathTools-3.67-408.fc27.0.riscv64 855 kB/s | 166 kB 00:00 (47-48/70): python2- 68% [=============- ] 2.1 MB/s | 20 MB 00:04 ETA (47-49/70): python2- 71% [============== ] 2.2 MB/s | 21 MB 00:03 ETA (47/70): unzip-6.0-36.fc28.riscv64.rpm 925 kB/s | 398 kB 00:00 (48-49/70): python2- 72% [==============- ] 2.2 MB/s | 21 MB 00:03 ETA (48/70): perl-Text-Tabs+Wrap-2013.0523-408.fc27 857 kB/s | 80 kB 00:00 (49-50/70): python2- 73% [==============- ] 2.2 MB/s | 22 MB 00:03 ETA (49/70): perl-parent-0.236-408.fc27.0.riscv64.n 762 kB/s | 71 kB 00:00 (50-51/70): python2- 74% [==============- ] 2.2 MB/s | 22 MB 00:03 ETA (50/70): perl-Scalar-List-Utils-1.48-1.fc27.ris 809 kB/s | 119 kB 00:00 (51-52/70): python2- 75% [=============== ] 2.2 MB/s | 22 MB 00:03 ETA (51/70): perl-Unicode-Normalize-1.25-408.fc27.0 847 kB/s | 164 kB 00:00 (52-53/70): perl-int 77% [=============== ] 2.2 MB/s | 23 MB 00:03 ETA (52/70): perl-macros-5.26.1-408.fc28.1.riscv64. 723 kB/s | 69 kB 00:00 (53-54/70): perl-int 78% [===============- ] 2.2 MB/s | 23 MB 00:02 ETA (53/70): perl-threads-2.21-1.fc27.riscv64.rpm 792 kB/s | 104 kB 00:00 (54-55/70): perl-int 79% [===============- ] 2.2 MB/s | 23 MB 00:02 ETA (54/70): perl-threads-shared-1.58-1.fc27.riscv6 793 kB/s | 91 kB 00:00 (55-56/70): perl-int 80% [================ ] 2.2 MB/s | 24 MB 00:02 ETA (55/70): perl-Socket-2.027-1.fc27.riscv64.rpm 828 kB/s | 95 kB 00:00 (56-57/70): perl-int 81% [================ ] 2.1 MB/s | 24 MB 00:02 ETA (56/70): perl-Pod-Usage-1.69-408.fc27.0.riscv64 832 kB/s | 89 kB 00:00 (57-58/70): perl-int 81% [================ ] 2.1 MB/s | 24 MB 00:02 ETA (57/70): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 849 kB/s | 139 kB 00:00 (58-59/70): perl-int 83% [================- ] 2.1 MB/s | 25 MB 00:02 ETA (58/70): perl-podlators-4.09-408.fc27.0.riscv64 840 kB/s | 157 kB 00:00 (59-60/70): python2- 84% [================- ] 2.1 MB/s | 25 MB 00:02 ETA (59/70): perl-File-Temp-0.230.400-408.fc27.0.ri 777 kB/s | 103 kB 00:00 (60-61/70): python2- 86% [================= ] 2.1 MB/s | 25 MB 00:01 ETA (60/70): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 736 kB/s | 97 kB 00:00 (61-62/70): python2- 87% [================= ] 2.1 MB/s | 26 MB 00:01 ETA (61/70): python2-libs-2.7.14-9.fc28.riscv64.rpm 683 kB/s | 8.1 MB 00:12 (62-63/70): perl-Pod 89% [=================- ] 1.8 MB/s | 26 MB 00:01 ETA (62/70): perl-Pod-Simple-3.35-408.fc27.0.riscv6 189 kB/s | 271 kB 00:01 (63-64/70): perl-Enc 89% [=================- ] 1.7 MB/s | 26 MB 00:01 ETA (63/70): perl-Time-Local-1.250-394.fc27.noarch. 700 kB/s | 30 kB 00:00 (64-65/70): perl-int 90% [================== ] 1.7 MB/s | 27 MB 00:01 ETA (64/70): perl-MIME-Base64-3.15-408.fc27.0.riscv 894 kB/s | 111 kB 00:00 (65-66/70): perl-int 91% [================== ] 1.7 MB/s | 27 MB 00:01 ETA (65/70): perl-Storable-2.62-408.fc27.0.riscv64. 893 kB/s | 205 kB 00:00 (66-67/70): perl-int 93% [==================- ] 1.7 MB/s | 28 MB 00:01 ETA (66/70): perl-Term-ANSIColor-4.06-408.fc27.0.ri 870 kB/s | 94 kB 00:00 (67-68/70): perl-int 94% [==================- ] 1.8 MB/s | 28 MB 00:00 ETA (67/70): perl-Term-Cap-1.17-408.fc27.0.riscv64. 828 kB/s | 78 kB 00:00 (68-69/70): perl-int 95% [=================== ] 1.8 MB/s | 28 MB 00:00 ETA (68/70): perl-Pod-Escapes-1.07-408.fc27.0.riscv 829 kB/s | 77 kB 00:00 (69-70/70): perl-int 95% [=================== ] 1.8 MB/s | 28 MB 00:00 ETA (69/70): perl-interpreter-5.26.1-408.fc28.1.ris 692 kB/s | 6.7 MB 00:09 (70/70): perl-Encode 98% [===================-] 1.6 MB/s | 29 MB 00:00 ETA (70/70): perl-Encode-2.94-16.fc27.riscv64.rpm 656 kB/s | 1.4 MB 00:02 -------------------------------------------------------------------------------- Total 1.8 MB/s | 29 MB 00:16 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/70 Installing : perl-Exporter-5.72-408.f [===== ] 1/70 Installing : perl-Exporter-5.72-408.f [======= ] 1/70 Installing : perl-Exporter-5.72-408.f [==================== ] 1/70 Installing : perl-Exporter-5.72-408.f [======================== ] 1/70 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/70 Installing : perl-libs-4:5.26.1-408.f [ ] 2/70 Installing : perl-libs-4:5.26.1-408.f [= ] 2/70 Installing : perl-libs-4:5.26.1-408.f [== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/70 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/70 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/70 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/70 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/70 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/70 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/70 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/70random: crng init done Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/70 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/70 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/70 Installing : perl-Carp-1.42-408.fc27. [ ] 3/70 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/70 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/70 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/70 Installing : perl-Scalar-List-Utils-3 [ ] 4/70 Installing : perl-Scalar-List-Utils-3 [= ] 4/70 Installing : perl-Scalar-List-Utils-3 [== ] 4/70 Installing : perl-Scalar-List-Utils-3 [=== ] 4/70 Installing : perl-Scalar-List-Utils-3 [===== ] 4/70 Installing : perl-Scalar-List-Utils-3 [======== ] 4/70 Installing : perl-Scalar-List-Utils-3 [========== ] 4/70 Installing : perl-Scalar-List-Utils-3 [============= ] 4/70 Installing : perl-Scalar-List-Utils-3 [================ ] 4/70 Installing : perl-Scalar-List-Utils-3 [================== ] 4/70 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/70 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/70 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/70 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/70 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/70 Installing : perl-Text-ParseWords-3.3 [ ] 5/70 Installing : perl-Text-ParseWords-3.3 [======= ] 5/70 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/70 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/70 Installing : python2-libs-2.7.14-9.fc [ ] 6/70 Installing : python2-libs-2.7.14-9.fc [= ] 6/70 Installing : python2-libs-2.7.14-9.fc [== ] 6/70 Installing : python2-libs-2.7.14-9.fc [=== ] 6/70 Installing : python2-libs-2.7.14-9.fc [==== ] 6/70 Installing : python2-libs-2.7.14-9.fc [===== ] 6/70 Installing : python2-libs-2.7.14-9.fc [====== ] 6/70 Installing : python2-libs-2.7.14-9.fc [======= ] 6/70 Installing : python2-libs-2.7.14-9.fc [======== ] 6/70 Installing : python2-libs-2.7.14-9.fc [========= ] 6/70 Installing : python2-libs-2.7.14-9.fc [========== ] 6/70 Installing : python2-libs-2.7.14-9.fc [=========== ] 6/70 Installing : python2-libs-2.7.14-9.fc [============ ] 6/70 Installing : python2-libs-2.7.14-9.fc [============= ] 6/70 Installing : python2-libs-2.7.14-9.fc [============== ] 6/70 Installing : python2-libs-2.7.14-9.fc [=============== ] 6/70 Installing : python2-libs-2.7.14-9.fc [================ ] 6/70 Installing : python2-libs-2.7.14-9.fc [================= ] 6/70 Installing : python2-libs-2.7.14-9.fc [================== ] 6/70 Installing : python2-libs-2.7.14-9.fc [=================== ] 6/70 Installing : python2-libs-2.7.14-9.fc [==================== ] 6/70 Installing : python2-libs-2.7.14-9.fc [===================== ] 6/70 Installing : python2-libs-2.7.14-9.fc [====================== ] 6/70 Installing : python2-libs-2.7.14-9.fc [======================= ] 6/70 Installing : python2-libs-2.7.14-9.fc [======================== ] 6/70 Installing : python2-libs-2.7.14-9.fc28.riscv64 6/70 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 6/70 Installing : python2-2.7.14-9.fc28.ri [ ] 7/70 Installing : python2-2.7.14-9.fc28.ri [====== ] 7/70 Installing : python2-2.7.14-9.fc28.ri [============== ] 7/70 Installing : python2-2.7.14-9.fc28.ri [==================== ] 7/70 Installing : python2-2.7.14-9.fc28.ri [======================= ] 7/70 Installing : python2-2.7.14-9.fc28.ri [======================== ] 7/70 Installing : python2-2.7.14-9.fc28.riscv64 7/70 Installing : python-srpm-macros-3-26. [ ] 8/70 Installing : python-srpm-macros-3-26. [======================= ] 8/70 Installing : python-srpm-macros-3-26.fc28.noarch 8/70 Installing : python-rpm-macros-3-26.f [ ] 9/70 Installing : python-rpm-macros-3-26.f [======================= ] 9/70 Installing : python-rpm-macros-3-26.fc28.noarch 9/70 Running scriptlet: xml-common-0.6.3-47.fc28.noarch 10/70 Installing : xml-common-0.6.3-47.fc28 [ ] 10/70 Installing : xml-common-0.6.3-47.fc28 [= ] 10/70 Installing : xml-common-0.6.3-47.fc28 [================= ] 10/70 Installing : xml-common-0.6.3-47.fc28 [=================== ] 10/70 Installing : xml-common-0.6.3-47.fc28 [==================== ] 10/70 Installing : xml-common-0.6.3-47.fc28 [======================== ] 10/70 Installing : xml-common-0.6.3-47.fc28.noarch 10/70 Installing : perl-Term-ANSIColor-4.06 [ ] 11/70 Installing : perl-Term-ANSIColor-4.06 [==== ] 11/70 Installing : perl-Term-ANSIColor-4.06 [================== ] 11/70 Installing : perl-Term-ANSIColor-4.06 [======================== ] 11/70 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 11/70 Installing : perl-macros-4:5.26.1-408 [ ] 12/70 Installing : perl-macros-4:5.26.1-408 [======================== ] 12/70 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 12/70 Installing : perl-constant-1.33-408.f [ ] 13/70 Installing : perl-constant-1.33-408.f [======= ] 13/70 Installing : perl-constant-1.33-408.f [======================== ] 13/70 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 13/70 Installing : perl-Errno-1.28-408.fc28 [ ] 14/70 Installing : perl-Errno-1.28-408.fc28 [================= ] 14/70 Installing : perl-Errno-1.28-408.fc28 [======================== ] 14/70 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 14/70 Installing : perl-File-Path-2.15-1.fc [ ] 15/70 Installing : perl-File-Path-2.15-1.fc [==== ] 15/70 Installing : perl-File-Path-2.15-1.fc [======== ] 15/70 Installing : perl-File-Path-2.15-1.fc [==================== ] 15/70 Installing : perl-File-Path-2.15-1.fc [======================== ] 15/70 Installing : perl-File-Path-2.15-1.fc27.noarch 15/70 Installing : perl-PathTools-3.67-408. [ ] 16/70 Installing : perl-PathTools-3.67-408. [== ] 16/70 Installing : perl-PathTools-3.67-408. [=== ] 16/70 Installing : perl-PathTools-3.67-408. [==== ] 16/70 Installing : perl-PathTools-3.67-408. [======= ] 16/70 Installing : perl-PathTools-3.67-408. [========= ] 16/70 Installing : perl-PathTools-3.67-408. [=========== ] 16/70 Installing : perl-PathTools-3.67-408. [============== ] 16/70 Installing : perl-PathTools-3.67-408. [================== ] 16/70 Installing : perl-PathTools-3.67-408. [==================== ] 16/70 Installing : perl-PathTools-3.67-408. [===================== ] 16/70 Installing : perl-PathTools-3.67-408. [====================== ] 16/70 Installing : perl-PathTools-3.67-408. [======================= ] 16/70 Installing : perl-PathTools-3.67-408. [======================== ] 16/70 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 16/70 Installing : perl-Text-Tabs+Wrap-2013 [ ] 17/70 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 17/70 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 17/70 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 17/70 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 17/70 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 17/70 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 17/70 Installing : perl-parent-1:0.236-408. [ ] 18/70 Installing : perl-parent-1:0.236-408. [============ ] 18/70 Installing : perl-parent-1:0.236-408. [======================== ] 18/70 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 18/70 Installing : perl-Unicode-Normalize-1 [ ] 19/70 Installing : perl-Unicode-Normalize-1 [= ] 19/70 Installing : perl-Unicode-Normalize-1 [== ] 19/70 Installing : perl-Unicode-Normalize-1 [=== ] 19/70 Installing : perl-Unicode-Normalize-1 [==== ] 19/70 Installing : perl-Unicode-Normalize-1 [===== ] 19/70 Installing : perl-Unicode-Normalize-1 [====== ] 19/70 Installing : perl-Unicode-Normalize-1 [======= ] 19/70 Installing : perl-Unicode-Normalize-1 [======== ] 19/70 Installing : perl-Unicode-Normalize-1 [========= ] 19/70 Installing : perl-Unicode-Normalize-1 [========== ] 19/70 Installing : perl-Unicode-Normalize-1 [============ ] 19/70 Installing : perl-Unicode-Normalize-1 [============= ] 19/70 Installing : perl-Unicode-Normalize-1 [============== ] 19/70 Installing : perl-Unicode-Normalize-1 [=============== ] 19/70 Installing : perl-Unicode-Normalize-1 [================ ] 19/70 Installing : perl-Unicode-Normalize-1 [================= ] 19/70 Installing : perl-Unicode-Normalize-1 [================== ] 19/70 Installing : perl-Unicode-Normalize-1 [=================== ] 19/70 Installing : perl-Unicode-Normalize-1 [==================== ] 19/70 Installing : perl-Unicode-Normalize-1 [===================== ] 19/70 Installing : perl-Unicode-Normalize-1 [====================== ] 19/70 Installing : perl-Unicode-Normalize-1 [======================= ] 19/70 Installing : perl-Unicode-Normalize-1 [======================== ] 19/70 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 19/70 Installing : perl-threads-shared-1.58 [ ] 20/70 Installing : perl-threads-shared-1.58 [=== ] 20/70 Installing : perl-threads-shared-1.58 [======= ] 20/70 Installing : perl-threads-shared-1.58 [========== ] 20/70 Installing : perl-threads-shared-1.58 [============== ] 20/70 Installing : perl-threads-shared-1.58 [================= ] 20/70 Installing : perl-threads-shared-1.58 [==================== ] 20/70 Installing : perl-threads-shared-1.58 [======================= ] 20/70 Installing : perl-threads-shared-1.58 [======================== ] 20/70 Installing : perl-threads-shared-1.58-1.fc27.riscv64 20/70 Installing : perl-threads-1:2.21-1.fc [ ] 21/70 Installing : perl-threads-1:2.21-1.fc [=== ] 21/70 Installing : perl-threads-1:2.21-1.fc [====== ] 21/70 Installing : perl-threads-1:2.21-1.fc [========= ] 21/70 Installing : perl-threads-1:2.21-1.fc [============= ] 21/70 Installing : perl-threads-1:2.21-1.fc [================ ] 21/70 Installing : perl-threads-1:2.21-1.fc [================== ] 21/70 Installing : perl-threads-1:2.21-1.fc [===================== ] 21/70 Installing : perl-threads-1:2.21-1.fc [====================== ] 21/70 Installing : perl-threads-1:2.21-1.fc [======================= ] 21/70 Installing : perl-threads-1:2.21-1.fc [======================== ] 21/70 Installing : perl-threads-1:2.21-1.fc27.riscv64 21/70 Installing : perl-interpreter-4:5.26. [ ] 22/70 Installing : perl-interpreter-4:5.26. [= ] 22/70 Installing : perl-interpreter-4:5.26. [== ] 22/70 Installing : perl-interpreter-4:5.26. [=== ] 22/70 Installing : perl-interpreter-4:5.26. [==== ] 22/70 Installing : perl-interpreter-4:5.26. [===== ] 22/70 Installing : perl-interpreter-4:5.26. [====== ] 22/70 Installing : perl-interpreter-4:5.26. [======= ] 22/70 Installing : perl-interpreter-4:5.26. [======== ] 22/70 Installing : perl-interpreter-4:5.26. [========= ] 22/70 Installing : perl-interpreter-4:5.26. [========== ] 22/70 Installing : perl-interpreter-4:5.26. [=========== ] 22/70 Installing : perl-interpreter-4:5.26. [============ ] 22/70 Installing : perl-interpreter-4:5.26. [============= ] 22/70 Installing : perl-interpreter-4:5.26. [============== ] 22/70 Installing : perl-interpreter-4:5.26. [=============== ] 22/70 Installing : perl-interpreter-4:5.26. [================ ] 22/70 Installing : perl-interpreter-4:5.26. [================= ] 22/70 Installing : perl-interpreter-4:5.26. [================== ] 22/70 Installing : perl-interpreter-4:5.26. [=================== ] 22/70 Installing : perl-interpreter-4:5.26. [==================== ] 22/70 Installing : perl-interpreter-4:5.26. [===================== ] 22/70 Installing : perl-interpreter-4:5.26. [====================== ] 22/70 Installing : perl-interpreter-4:5.26. [======================= ] 22/70 Installing : perl-interpreter-4:5.26. [======================== ] 22/70 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 22/70 Installing : perl-Socket-4:2.027-1.fc [ ] 23/70 Installing : perl-Socket-4:2.027-1.fc [=== ] 23/70 Installing : perl-Socket-4:2.027-1.fc [======= ] 23/70 Installing : perl-Socket-4:2.027-1.fc [========== ] 23/70 Installing : perl-Socket-4:2.027-1.fc [============== ] 23/70 Installing : perl-Socket-4:2.027-1.fc [================= ] 23/70 Installing : perl-Socket-4:2.027-1.fc [==================== ] 23/70 Installing : perl-Socket-4:2.027-1.fc [===================== ] 23/70 Installing : perl-Socket-4:2.027-1.fc [====================== ] 23/70 Installing : perl-Socket-4:2.027-1.fc [======================= ] 23/70 Installing : perl-Socket-4:2.027-1.fc [======================== ] 23/70 Installing : perl-Socket-4:2.027-1.fc27.riscv64 23/70 Installing : perl-IO-1.38-408.fc28.1. [ ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [= ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [=== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [==== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [===== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [====== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [======= ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [======== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [============== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [================= ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 24/70 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 24/70 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 24/70 Installing : perl-File-Temp-0.230.400 [ ] 25/70 Installing : perl-File-Temp-0.230.400 [=== ] 25/70 Installing : perl-File-Temp-0.230.400 [============ ] 25/70 Installing : perl-File-Temp-0.230.400 [===================== ] 25/70 Installing : perl-File-Temp-0.230.400 [======================== ] 25/70 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 25/70 Installing : perl-Storable-1:2.62-408 [ ] 26/70 Installing : perl-Storable-1:2.62-408 [== ] 26/70 Installing : perl-Storable-1:2.62-408 [==== ] 26/70 Installing : perl-Storable-1:2.62-408 [====== ] 26/70 Installing : perl-Storable-1:2.62-408 [======== ] 26/70 Installing : perl-Storable-1:2.62-408 [========== ] 26/70 Installing : perl-Storable-1:2.62-408 [============ ] 26/70 Installing : perl-Storable-1:2.62-408 [============== ] 26/70 Installing : perl-Storable-1:2.62-408 [================ ] 26/70 Installing : perl-Storable-1:2.62-408 [================== ] 26/70 Installing : perl-Storable-1:2.62-408 [==================== ] 26/70 Installing : perl-Storable-1:2.62-408 [====================== ] 26/70 Installing : perl-Storable-1:2.62-408 [======================== ] 26/70 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 26/70 Installing : perl-MIME-Base64-3.15-40 [ ] 27/70 Installing : perl-MIME-Base64-3.15-40 [= ] 27/70 Installing : perl-MIME-Base64-3.15-40 [== ] 27/70 Installing : perl-MIME-Base64-3.15-40 [========== ] 27/70 Installing : perl-MIME-Base64-3.15-40 [================== ] 27/70 Installing : perl-MIME-Base64-3.15-40 [======================= ] 27/70 Installing : perl-MIME-Base64-3.15-40 [======================== ] 27/70 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 27/70 Installing : perl-Term-Cap-1.17-408.f [ ] 28/70 Installing : perl-Term-Cap-1.17-408.f [==== ] 28/70 Installing : perl-Term-Cap-1.17-408.f [======================== ] 28/70 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 28/70 Installing : perl-Pod-Escapes-1:1.07- [ ] 29/70 Installing : perl-Pod-Escapes-1:1.07- [==== ] 29/70 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 29/70 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 29/70 Installing : perl-Time-Local-1:1.250- [ ] 30/70 Installing : perl-Time-Local-1:1.250- [= ] 30/70 Installing : perl-Time-Local-1:1.250- [===== ] 30/70 Installing : perl-Time-Local-1:1.250- [======== ] 30/70 Installing : perl-Time-Local-1:1.250- [========= ] 30/70 Installing : perl-Time-Local-1:1.250- [================= ] 30/70 Installing : perl-Time-Local-1:1.250- [=================== ] 30/70 Installing : perl-Time-Local-1:1.250- [======================== ] 30/70 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 30/70 Installing : perl-HTTP-Tiny-0.070-408 [ ] 31/70 Installing : perl-HTTP-Tiny-0.070-408 [== ] 31/70 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 31/70 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 31/70 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 31/70 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 31/70 Installing : perl-Pod-Simple-1:3.35-4 [ ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [= ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 32/70 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 32/70 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 32/70 Installing : perl-Encode-4:2.94-16.fc [ ] 33/70 Installing : perl-Encode-4:2.94-16.fc [= ] 33/70 Installing : perl-Encode-4:2.94-16.fc [== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [=== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [==== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [===== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [====== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [======= ] 33/70 Installing : perl-Encode-4:2.94-16.fc [======== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [========= ] 33/70 Installing : perl-Encode-4:2.94-16.fc [========== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [=========== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [============ ] 33/70 Installing : perl-Encode-4:2.94-16.fc [============= ] 33/70 Installing : perl-Encode-4:2.94-16.fc [============== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [=============== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [================ ] 33/70 Installing : perl-Encode-4:2.94-16.fc [================= ] 33/70 Installing : perl-Encode-4:2.94-16.fc [================== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [=================== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [==================== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [===================== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [====================== ] 33/70 Installing : perl-Encode-4:2.94-16.fc [======================= ] 33/70 Installing : perl-Encode-4:2.94-16.fc [======================== ] 33/70 Installing : perl-Encode-4:2.94-16.fc27.riscv64 33/70 Installing : perl-Getopt-Long-1:2.50- [ ] 34/70 Installing : perl-Getopt-Long-1:2.50- [=== ] 34/70 Installing : perl-Getopt-Long-1:2.50- [==== ] 34/70 Installing : perl-Getopt-Long-1:2.50- [===== ] 34/70 Installing : perl-Getopt-Long-1:2.50- [====== ] 34/70 Installing : perl-Getopt-Long-1:2.50- [======= ] 34/70 Installing : perl-Getopt-Long-1:2.50- [========= ] 34/70 Installing : perl-Getopt-Long-1:2.50- [=============== ] 34/70 Installing : perl-Getopt-Long-1:2.50- [===================== ] 34/70 Installing : perl-Getopt-Long-1:2.50- [======================== ] 34/70 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 34/70 Installing : perl-Pod-Usage-4:1.69-40 [ ] 35/70 Installing : perl-Pod-Usage-4:1.69-40 [== ] 35/70 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 35/70 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 35/70 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 35/70 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 35/70 Installing : perl-podlators-4.09-408. [ ] 36/70 Installing : perl-podlators-4.09-408. [= ] 36/70 Installing : perl-podlators-4.09-408. [== ] 36/70 Installing : perl-podlators-4.09-408. [=== ] 36/70 Installing : perl-podlators-4.09-408. [==== ] 36/70 Installing : perl-podlators-4.09-408. [===== ] 36/70 Installing : perl-podlators-4.09-408. [====== ] 36/70 Installing : perl-podlators-4.09-408. [======= ] 36/70 Installing : perl-podlators-4.09-408. [=========== ] 36/70 Installing : perl-podlators-4.09-408. [=============== ] 36/70 Installing : perl-podlators-4.09-408. [================ ] 36/70 Installing : perl-podlators-4.09-408. [================= ] 36/70 Installing : perl-podlators-4.09-408. [===================== ] 36/70 Installing : perl-podlators-4.09-408. [====================== ] 36/70 Installing : perl-podlators-4.09-408. [======================= ] 36/70 Installing : perl-podlators-4.09-408. [======================== ] 36/70 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 36/70 Installing : perl-Pod-Perldoc-3.28-40 [ ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [= ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 37/70 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 37/70 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 37/70 Installing : perl-Data-Dumper-2.167-4 [ ] 38/70 Installing : perl-Data-Dumper-2.167-4 [=== ] 38/70 Installing : perl-Data-Dumper-2.167-4 [==== ] 38/70 Installing : perl-Data-Dumper-2.167-4 [======== ] 38/70 Installing : perl-Data-Dumper-2.167-4 [============ ] 38/70 Installing : perl-Data-Dumper-2.167-4 [=============== ] 38/70 Installing : perl-Data-Dumper-2.167-4 [=================== ] 38/70 Installing : perl-Data-Dumper-2.167-4 [====================== ] 38/70 Installing : perl-Data-Dumper-2.167-4 [======================= ] 38/70 Installing : perl-Data-Dumper-2.167-4 [======================== ] 38/70 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 38/70 Installing : unzip-6.0-36.fc28.riscv6 [ ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [= ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 39/70 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 39/70 Installing : unzip-6.0-36.fc28.riscv64 39/70 Installing : zip-3.0-20.fc28.riscv64 [ ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [=== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [==== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [===== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [====== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [======= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [======== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [========= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [========== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [============ ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [============= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [============== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [================ ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [================= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [================== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 40/70 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 40/70 Installing : zip-3.0-20.fc28.riscv64 40/70 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 41/70 Installing : m4-1.4.18-5.fc28.riscv64 41/70 Running scriptlet: m4-1.4.18-5.fc28.riscv64 41/70 Installing : sgml-common-0.6.3-47.fc2 [ ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [===== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [====== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [========== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [=========== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [============ ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [============= ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [============== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [=============== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [================ ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [================= ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [================== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [=================== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [==================== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [===================== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [====================== ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [======================= ] 42/70 Installing : sgml-common-0.6.3-47.fc2 [======================== ] 42/70 Installing : sgml-common-0.6.3-47.fc28.noarch 42/70 Installing : docbook-dtds-1.0-68.fc28 [ ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [= ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [=== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [==== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [===== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [====== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [======= ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [======== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [========= ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [========== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [=========== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [============ ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [============= ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [============== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [=============== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [================ ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [================= ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [================== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [=================== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [==================== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [===================== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [====================== ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [======================= ] 43/70 Installing : docbook-dtds-1.0-68.fc28 [======================== ] 43/70 Installing : docbook-dtds-1.0-68.fc28.noarch 43/70 Running scriptlet: docbook-dtds-1.0-68.fc28.noarch 43/70 Installing : dwz-0.12-5.fc28.riscv64 [ ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 44/70 Installing : dwz-0.12-5.fc28.riscv64 44/70 Installing : perl-srpm-macros-1-26.fc [ ] 45/70 Installing : perl-srpm-macros-1-26.fc [====================== ] 45/70 Installing : perl-srpm-macros-1-26.fc28.noarch 45/70 Installing : go-srpm-macros-2-11.fc28 [ ] 46/70 Installing : go-srpm-macros-2-11.fc28 [====================== ] 46/70 Installing : go-srpm-macros-2-11.fc28.noarch 46/70 Installing : gnat-srpm-macros-4-5.fc2 [ ] 47/70 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 47/70 Installing : gnat-srpm-macros-4-5.fc28.noarch 47/70 Installing : ghc-srpm-macros-1.4.2-7. [ ] 48/70 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 48/70 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 48/70 Installing : fpc-srpm-macros-1.1-4.fc [ ] 49/70 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 49/70 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 49/70 Installing : python2-rpm-macros-3-26. [ ] 50/70 Installing : python2-rpm-macros-3-26. [======================= ] 50/70 Installing : python2-rpm-macros-3-26.fc28.noarch 50/70 Installing : libpkgconf-1.4.1-1.fc27. [ ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 51/70 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 51/70 Installing : libpkgconf-1.4.1-1.fc27.riscv64 51/70 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 51/70 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 52/70 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 52/70 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 52/70 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 52/70 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 52/70 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 52/70 Installing : pkgconf-1.4.1-1.fc27.riscv64 52/70 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 53/70 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 53/70 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 53/70 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 53/70 Installing : pkgconf-pkg-config-1.4.1 [ ] 54/70 Installing : pkgconf-pkg-config-1.4.1 [==== ] 54/70 Installing : pkgconf-pkg-config-1.4.1 [===== ] 54/70 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 54/70 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 54/70 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 54/70 Installing : file-5.32-3.fc28.riscv64 [ ] 55/70 Installing : file-5.32-3.fc28.riscv64 [====== ] 55/70 Installing : file-5.32-3.fc28.riscv64 [=========== ] 55/70 Installing : file-5.32-3.fc28.riscv64 [================== ] 55/70 Installing : file-5.32-3.fc28.riscv64 [===================== ] 55/70 Installing : file-5.32-3.fc28.riscv64 [====================== ] 55/70 Installing : file-5.32-3.fc28.riscv64 [======================= ] 55/70 Installing : file-5.32-3.fc28.riscv64 [======================== ] 55/70 Installing : file-5.32-3.fc28.riscv64 55/70 Installing : rust-srpm-macros-5-1.fc2 [ ] 56/70 Installing : rust-srpm-macros-5-1.fc2 [=== ] 56/70 Installing : rust-srpm-macros-5-1.fc2 [===== ] 56/70 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 56/70 Installing : rust-srpm-macros-5-1.fc28.noarch 56/70 Installing : qt5-srpm-macros-5.10.0-1 [ ] 57/70 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 57/70 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 57/70 Installing : openblas-srpm-macros-2-2 [ ] 58/70 Installing : openblas-srpm-macros-2-2 [================ ] 58/70 Installing : openblas-srpm-macros-2-2.fc27.noarch 58/70 Installing : ocaml-srpm-macros-5-2.fc [ ] 59/70 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 59/70 Installing : ocaml-srpm-macros-5-2.fc27.noarch 59/70 Installing : nim-srpm-macros-1-1.fc28 [ ] 60/70 Installing : nim-srpm-macros-1-1.fc28 [=== ] 60/70 Installing : nim-srpm-macros-1-1.fc28 [===== ] 60/70 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 60/70 Installing : nim-srpm-macros-1-1.fc28.noarch 60/70 Installing : redhat-rpm-config-96-1.f [ ] 61/70 Installing : redhat-rpm-config-96-1.f [== ] 61/70 Installing : redhat-rpm-config-96-1.f [=== ] 61/70 Installing : redhat-rpm-config-96-1.f [========= ] 61/70 Installing : redhat-rpm-config-96-1.f [=========== ] 61/70 Installing : redhat-rpm-config-96-1.f [================= ] 61/70 Installing : redhat-rpm-config-96-1.f [================== ] 61/70 Installing : redhat-rpm-config-96-1.f [=================== ] 61/70 Installing : redhat-rpm-config-96-1.f [===================== ] 61/70 Installing : redhat-rpm-config-96-1.f [====================== ] 61/70 Installing : redhat-rpm-config-96-1.f [======================== ] 61/70 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 61/70 Installing : python3-rpm-macros-3-26. [ ] 62/70 Installing : python3-rpm-macros-3-26. [======================= ] 62/70 Installing : python3-rpm-macros-3-26.fc28.noarch 62/70 Installing : python3-setuptools-38.4. [ ] 63/70 Installing : python3-setuptools-38.4. [= ] 63/70 Installing : python3-setuptools-38.4. [== ] 63/70 Installing : python3-setuptools-38.4. [=== ] 63/70 Installing : python3-setuptools-38.4. [==== ] 63/70 Installing : python3-setuptools-38.4. [===== ] 63/70 Installing : python3-setuptools-38.4. [====== ] 63/70 Installing : python3-setuptools-38.4. [======= ] 63/70 Installing : python3-setuptools-38.4. [======== ] 63/70 Installing : python3-setuptools-38.4. [========= ] 63/70 Installing : python3-setuptools-38.4. [========== ] 63/70 Installing : python3-setuptools-38.4. [=========== ] 63/70 Installing : python3-setuptools-38.4. [============ ] 63/70 Installing : python3-setuptools-38.4. [============= ] 63/70 Installing : python3-setuptools-38.4. [============== ] 63/70 Installing : python3-setuptools-38.4. [=============== ] 63/70 Installing : python3-setuptools-38.4. [================ ] 63/70 Installing : python3-setuptools-38.4. [================= ] 63/70 Installing : python3-setuptools-38.4. [================== ] 63/70 Installing : python3-setuptools-38.4. [=================== ] 63/70 Installing : python3-setuptools-38.4. [==================== ] 63/70 Installing : python3-setuptools-38.4. [===================== ] 63/70 Installing : python3-setuptools-38.4. [====================== ] 63/70 Installing : python3-setuptools-38.4. [======================= ] 63/70 Installing : python3-setuptools-38.4. [======================== ] 63/70 Installing : python3-setuptools-38.4.0-3.fc28.noarch 63/70 Installing : python3-rpm-generators-5 [ ] 64/70 Installing : python3-rpm-generators-5 [===== ] 64/70 Installing : python3-rpm-generators-5 [=================== ] 64/70 Installing : python3-rpm-generators-5 [======================== ] 64/70 Installing : python3-rpm-generators-5-1.fc28.noarch 64/70 Installing : emacs-filesystem-1:25.3- [ ] 65/70 Installing : emacs-filesystem-1:25.3- [===== ] 65/70 Installing : emacs-filesystem-1:25.3- [============ ] 65/70 Installing : emacs-filesystem-1:25.3- [=================== ] 65/70 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 65/70 Installing : autoconf-2.69-26.fc28.no [ ] 66/70 Installing : autoconf-2.69-26.fc28.no [= ] 66/70 Installing : autoconf-2.69-26.fc28.no [== ] 66/70 Installing : autoconf-2.69-26.fc28.no [=== ] 66/70 Installing : autoconf-2.69-26.fc28.no [==== ] 66/70 Installing : autoconf-2.69-26.fc28.no [===== ] 66/70 Installing : autoconf-2.69-26.fc28.no [====== ] 66/70 Installing : autoconf-2.69-26.fc28.no [======= ] 66/70 Installing : autoconf-2.69-26.fc28.no [======== ] 66/70 Installing : autoconf-2.69-26.fc28.no [========= ] 66/70 Installing : autoconf-2.69-26.fc28.no [========== ] 66/70 Installing : autoconf-2.69-26.fc28.no [=========== ] 66/70 Installing : autoconf-2.69-26.fc28.no [============ ] 66/70 Installing : autoconf-2.69-26.fc28.no [============= ] 66/70 Installing : autoconf-2.69-26.fc28.no [============== ] 66/70 Installing : autoconf-2.69-26.fc28.no [=============== ] 66/70 Installing : autoconf-2.69-26.fc28.no [================ ] 66/70 Installing : autoconf-2.69-26.fc28.no [================= ] 66/70 Installing : autoconf-2.69-26.fc28.no [================== ] 66/70 Installing : autoconf-2.69-26.fc28.no [=================== ] 66/70 Installing : autoconf-2.69-26.fc28.no [==================== ] 66/70 Installing : autoconf-2.69-26.fc28.no [===================== ] 66/70 Installing : autoconf-2.69-26.fc28.no [====================== ] 66/70 Installing : autoconf-2.69-26.fc28.no [======================= ] 66/70 Installing : autoconf-2.69-26.fc28.no [======================== ] 66/70 Installing : autoconf-2.69-26.fc28.noarch 66/70 Running scriptlet: autoconf-2.69-26.fc28.noarch 66/70 Installing : python2-devel-2.7.14-9.f [ ] 67/70 Installing : python2-devel-2.7.14-9.f [= ] 67/70 Installing : python2-devel-2.7.14-9.f [== ] 67/70 Installing : python2-devel-2.7.14-9.f [=== ] 67/70 Installing : python2-devel-2.7.14-9.f [==== ] 67/70 Installing : python2-devel-2.7.14-9.f [===== ] 67/70 Installing : python2-devel-2.7.14-9.f [====== ] 67/70 Installing : python2-devel-2.7.14-9.f [======= ] 67/70 Installing : python2-devel-2.7.14-9.f [======== ] 67/70 Installing : python2-devel-2.7.14-9.f [========= ] 67/70 Installing : python2-devel-2.7.14-9.f [========== ] 67/70 Installing : python2-devel-2.7.14-9.f [=========== ] 67/70 Installing : python2-devel-2.7.14-9.f [============ ] 67/70 Installing : python2-devel-2.7.14-9.f [============= ] 67/70 Installing : python2-devel-2.7.14-9.f [============== ] 67/70 Installing : python2-devel-2.7.14-9.f [=============== ] 67/70 Installing : python2-devel-2.7.14-9.f [================ ] 67/70 Installing : python2-devel-2.7.14-9.f [================= ] 67/70 Installing : python2-devel-2.7.14-9.f [================== ] 67/70 Installing : python2-devel-2.7.14-9.f [=================== ] 67/70 Installing : python2-devel-2.7.14-9.f [==================== ] 67/70 Installing : python2-devel-2.7.14-9.f [===================== ] 67/70 Installing : python2-devel-2.7.14-9.f [====================== ] 67/70 Installing : python2-devel-2.7.14-9.f [======================= ] 67/70 Installing : python2-devel-2.7.14-9.f [======================== ] 67/70 Installing : python2-devel-2.7.14-9.fc28.riscv64 67/70 Installing : python3-devel-3.6.4-14.0 [ ] 68/70 Installing : python3-devel-3.6.4-14.0 [= ] 68/70 Installing : python3-devel-3.6.4-14.0 [== ] 68/70 Installing : python3-devel-3.6.4-14.0 [=== ] 68/70 Installing : python3-devel-3.6.4-14.0 [==== ] 68/70 Installing : python3-devel-3.6.4-14.0 [===== ] 68/70 Installing : python3-devel-3.6.4-14.0 [====== ] 68/70 Installing : python3-devel-3.6.4-14.0 [======= ] 68/70 Installing : python3-devel-3.6.4-14.0 [======== ] 68/70 Installing : python3-devel-3.6.4-14.0 [========= ] 68/70 Installing : python3-devel-3.6.4-14.0 [========== ] 68/70 Installing : python3-devel-3.6.4-14.0 [=========== ] 68/70 Installing : python3-devel-3.6.4-14.0 [============ ] 68/70 Installing : python3-devel-3.6.4-14.0 [============= ] 68/70 Installing : python3-devel-3.6.4-14.0 [============== ] 68/70 Installing : python3-devel-3.6.4-14.0 [=============== ] 68/70 Installing : python3-devel-3.6.4-14.0 [================ ] 68/70 Installing : python3-devel-3.6.4-14.0 [================= ] 68/70 Installing : python3-devel-3.6.4-14.0 [================== ] 68/70 Installing : python3-devel-3.6.4-14.0 [=================== ] 68/70 Installing : python3-devel-3.6.4-14.0 [==================== ] 68/70 Installing : python3-devel-3.6.4-14.0 [===================== ] 68/70 Installing : python3-devel-3.6.4-14.0 [====================== ] 68/70 Installing : python3-devel-3.6.4-14.0 [======================= ] 68/70 Installing : python3-devel-3.6.4-14.0 [======================== ] 68/70 Installing : python3-devel-3.6.4-14.0.fc28.riscv64 68/70 Installing : docbook-style-xsl-1.79.2 [ ] 69/70 Installing : docbook-style-xsl-1.79.2 [= ] 69/70 Installing : docbook-style-xsl-1.79.2 [== ] 69/70 Installing : docbook-style-xsl-1.79.2 [=== ] 69/70 Installing : docbook-style-xsl-1.79.2 [==== ] 69/70 Installing : docbook-style-xsl-1.79.2 [===== ] 69/70 Installing : docbook-style-xsl-1.79.2 [====== ] 69/70 Installing : docbook-style-xsl-1.79.2 [======= ] 69/70 Installing : docbook-style-xsl-1.79.2 [======== ] 69/70 Installing : docbook-style-xsl-1.79.2 [========= ] 69/70 Installing : docbook-style-xsl-1.79.2 [========== ] 69/70 Installing : docbook-style-xsl-1.79.2 [=========== ] 69/70 Installing : docbook-style-xsl-1.79.2 [============ ] 69/70 Installing : docbook-style-xsl-1.79.2 [============= ] 69/70 Installing : docbook-style-xsl-1.79.2 [============== ] 69/70 Installing : docbook-style-xsl-1.79.2 [=============== ] 69/70 Installing : docbook-style-xsl-1.79.2 [================ ] 69/70 Installing : docbook-style-xsl-1.79.2 [================= ] 69/70 Installing : docbook-style-xsl-1.79.2 [================== ] 69/70 Installing : docbook-style-xsl-1.79.2 [=================== ] 69/70 Installing : docbook-style-xsl-1.79.2 [==================== ] 69/70 Installing : docbook-style-xsl-1.79.2 [===================== ] 69/70 Installing : docbook-style-xsl-1.79.2 [====================== ] 69/70 Installing : docbook-style-xsl-1.79.2 [======================= ] 69/70 Installing : docbook-style-xsl-1.79.2 [======================== ] 69/70 Installing : docbook-style-xsl-1.79.2-6.fc28.noarch 69/70 Running scriptlet: docbook-style-xsl-1.79.2-6.fc28.noarch 69/70 Installing : libxslt-1.1.28-13.fc28.r [ ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [= ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [=== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [==== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [===== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [====== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [======= ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [======== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [========= ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [========== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [=========== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [============ ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [============= ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [============== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [=============== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [================ ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [================= ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [================== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [=================== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [==================== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [===================== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [====================== ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [======================= ] 70/70 Installing : libxslt-1.1.28-13.fc28.r [======================== ] 70/70 Installing : libxslt-1.1.28-13.fc28.riscv64 70/70 Running scriptlet: libxslt-1.1.28-13.fc28.riscv64 70/70 Verifying : autoconf-2.69-26.fc28.noarch 1/70 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 2/70 Verifying : docbook-style-xsl-1.79.2-6.fc28.noarch 3/70 Verifying : xml-common-0.6.3-47.fc28.noarch 4/70 Verifying : libxslt-1.1.28-13.fc28.riscv64 5/70 Verifying : python2-devel-2.7.14-9.fc28.riscv64 6/70 Verifying : python2-2.7.14-9.fc28.riscv64 7/70 Verifying : python2-libs-2.7.14-9.fc28.riscv64 8/70 Verifying : python3-devel-3.6.4-14.0.fc28.riscv64 9/70 Verifying : python-rpm-macros-3-26.fc28.noarch 10/70 Verifying : python3-rpm-generators-5-1.fc28.noarch 11/70 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 12/70 Verifying : python3-rpm-macros-3-26.fc28.noarch 13/70 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 14/70 Verifying : nim-srpm-macros-1-1.fc28.noarch 15/70 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 16/70 Verifying : openblas-srpm-macros-2-2.fc27.noarch 17/70 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/70 Verifying : rust-srpm-macros-5-1.fc28.noarch 19/70 Verifying : file-5.32-3.fc28.riscv64 20/70 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 21/70 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 22/70 Verifying : pkgconf-1.4.1-1.fc27.riscv64 23/70 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 24/70 Verifying : python2-rpm-macros-3-26.fc28.noarch 25/70 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 26/70 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 27/70 Verifying : gnat-srpm-macros-4-5.fc28.noarch 28/70 Verifying : go-srpm-macros-2-11.fc28.noarch 29/70 Verifying : perl-srpm-macros-1-26.fc28.noarch 30/70 Verifying : python-srpm-macros-3-26.fc28.noarch 31/70 Verifying : dwz-0.12-5.fc28.riscv64 32/70 Verifying : zip-3.0-20.fc28.riscv64 33/70 Verifying : docbook-dtds-1.0-68.fc28.noarch 34/70 Verifying : sgml-common-0.6.3-47.fc28.noarch 35/70 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 36/70 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 37/70 Verifying : perl-File-Path-2.15-1.fc27.noarch 38/70 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 39/70 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 40/70 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 41/70 Verifying : m4-1.4.18-5.fc28.riscv64 42/70 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 43/70 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 44/70 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 45/70 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 46/70 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 47/70 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 48/70 Verifying : unzip-6.0-36.fc28.riscv64 49/70 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 50/70 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 51/70 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 52/70 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 53/70 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 54/70 Verifying : perl-threads-1:2.21-1.fc27.riscv64 55/70 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 56/70 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 57/70 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 58/70 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 59/70 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 60/70 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 61/70 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 62/70 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 63/70 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 64/70 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 65/70 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 66/70 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 67/70 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 68/70 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 69/70 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 70/70 Installed: autoconf.noarch 2.69-26.fc28 docbook-style-xsl.noarch 1.79.2-6.fc28 libxslt.riscv64 1.1.28-13.fc28 python2-devel.riscv64 2.7.14-9.fc28 python3-devel.riscv64 3.6.4-14.0.fc28 docbook-dtds.noarch 1.0-68.fc28 dwz.riscv64 0.12-5.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 m4.riscv64 1.4.18-5.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-srpm-macros.noarch 1-26.fc28 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 python2-rpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-rpm-macros.noarch 3-26.fc28 python3-setuptools.noarch 38.4.0-3.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 sgml-common.noarch 0.6.3-47.fc28 unzip.riscv64 6.0-36.fc28 xml-common.noarch 0.6.3-47.fc28 zip.riscv64 3.0-20.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:06:38 ago on Wed Feb 21 13:47:33 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:06:57 ago on Wed Feb 21 13:47:33 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group make redhat-rpm-config diffutils grep sed shadow-utils util-linux info coreutils gawk tar findutils cpio xz rpm-build which bash bzip2 gzip fedora-release unzip patch ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 11 Packages Total download size: 11 M Installed size: 48 M Downloading Packages: (1/11): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/11): make-4.2.1 6% [= ] 2.6 MB/s | 815 kB 00:04 ETA (1/11): make-4.2.1-6.fc27.riscv64.rpm 925 kB/s | 486 kB 00:00 (2-3/11): diffutils- 12% [==- ] 2.6 MB/s | 1.4 MB 00:03 ETA (2/11): diffutils-3.6-3.fc28.riscv64.rpm 795 kB/s | 577 kB 00:00 (3-4/11): rpm-build- 14% [==- ] 2.6 MB/s | 1.7 MB 00:03 ETA (3/11): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 679 kB/s | 235 kB 00:00 (4-5/11): zstd-1.3.3 18% [===- ] 2.6 MB/s | 2.1 MB 00:03 ETA (4/11): tar-1.29-7.fc27.riscv64.rpm 707 kB/s | 805 kB 00:01 (5-6/11): which-2.21 20% [==== ] 2.5 MB/s | 2.3 MB 00:03 ETA (5/11): which-2.21-4.fc28.riscv64.rpm 344 kB/s | 65 kB 00:00 (6/11): zstd-1.3.3-1 20% [==== ] 2.5 MB/s | 2.3 MB 00:03 ETA (6/11): xz-5.2.3-5.fc28.riscv64.rpm 913 kB/s | 212 kB 00:00 (7-8/11): zstd-1.3.3 25% [===== ] 2.5 MB/s | 3.0 MB 00:03 ETA (7/11): patch-2.7.5-6.fc27.riscv64.rpm 744 kB/s | 270 kB 00:00 (8-9/11): zstd-1.3.3 27% [===== ] 2.5 MB/s | 3.1 MB 00:03 ETA (8/11): bzip2-1.0.6-24.fc28.riscv64.rpm 433 kB/s | 81 kB 00:00 (9-10/11): zstd-1.3. 28% [=====- ] 2.4 MB/s | 3.2 MB 00:03 ETA (9-11/11): zstd-1.3. 35% [======= ] 2.5 MB/s | 4.1 MB 00:02 ETA (9-11/11): elfutils- 43% [========- ] 2.5 MB/s | 5.0 MB 00:02 ETA (9/11): zstd-1.3.3-1.fc27.riscv64.rpm 713 kB/s | 1.1 MB 00:01 (10-11/11): binutils 44% [========- ] 2.4 MB/s | 5.1 MB 00:02 ETA (10/11): elfutils-0.170-4.fc28.riscv64.rpm 789 kB/s | 791 kB 00:01 (11/11): binutils-2. 46% [========= ] 2.4 MB/s | 5.3 MB 00:02 ETA (11/11): binutils-2. 54% [==========- ] 2.4 MB/s | 6.2 MB 00:02 ETA (11/11): binutils-2. 61% [============ ] 2.5 MB/s | 7.1 MB 00:01 ETA (11/11): binutils-2. 69% [=============- ] 2.5 MB/s | 8.0 MB 00:01 ETA (11/11): binutils-2. 76% [=============== ] 2.5 MB/s | 8.8 MB 00:01 ETA (11/11): binutils-2. 84% [================- ] 2.5 MB/s | 9.7 MB 00:00 ETA (11/11): binutils-2. 92% [================== ] 2.6 MB/s | 11 MB 00:00 ETA (11/11): binutils-2.30-1.fc28.riscv64.rpm 1.8 MB/s | 6.9 MB 00:03 -------------------------------------------------------------------------------- Total 2.0 MB/s | 11 MB 00:05 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [==== ] 1/1 Preparing : [========= ] 1/1 Preparing : [============= ] 1/1 Preparing : [================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/11 Installing : binutils-2.30-1.fc28.ris [= ] 1/11 Installing : binutils-2.30-1.fc28.ris [== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======== ] 1/11 Installing : binutils-2.30-1.fc28.ris [========= ] 1/11 Installing : binutils-2.30-1.fc28.ris [========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [============ ] 1/11 Installing : binutils-2.30-1.fc28.ris [============= ] 1/11 Installing : binutils-2.30-1.fc28.ris [============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [================ ] 1/11 Installing : binutils-2.30-1.fc28.ris [================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/11 Installing : binutils-2.30-1.fc28.riscv64 1/11 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/11 Installing : elfutils-0.170-4.fc28.ri [ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/11 Installing : elfutils-0.170-4.fc28.riscv64 2/11 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.riscv64 3/11 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 4/11 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv64 5/11 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv64 6/11 Installing : diffutils-3.6-3.fc28.ris [ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/11 Installing : diffutils-3.6-3.fc28.riscv64 7/11 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/11 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv64 8/11 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/11 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/11 Installing : which-2.21-4.fc28.riscv6 [ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/11 Installing : which-2.21-4.fc28.riscv64 10/11 Running scriptlet: which-2.21-4.fc28.riscv64 10/11 Installing : make-1:4.2.1-6.fc27.risc [ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 11/11 Installing : make-1:4.2.1-6.fc27.riscv64 11/11 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 11/11 Verifying : tar-2:1.29-7.fc27.riscv64 1/11 Verifying : diffutils-3.6-3.fc28.riscv64 2/11 Verifying : make-1:4.2.1-6.fc27.riscv64 3/11 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 4/11 Verifying : zstd-1.3.3-1.fc27.riscv64 5/11 Verifying : which-2.21-4.fc28.riscv64 6/11 Verifying : patch-2.7.5-6.fc27.riscv64 7/11 Verifying : xz-5.2.3-5.fc28.riscv64 8/11 Verifying : bzip2-1.0.6-24.fc28.riscv64 9/11 Verifying : elfutils-0.170-4.fc28.riscv64 10/11 Verifying : binutils-2.30-1.fc28.riscv64 11/11 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:08:33 ago on Wed Feb 21 13:47:33 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 533 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 627 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-heade 36% [======= ] 765 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 822 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 818 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 89% [=================- ] 961 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 976 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 960 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 1.0 MB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 2.0 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off