OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x        (ptrval) (512 bytes)
Zone ranges:
  DMA32    empty
  Normal   [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @        (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on.  Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[<        (ptrval)>] walk_stackframe+0x0/0xa2
[<        (ptrval)>] show_stack+0x26/0x34
[<        (ptrval)>] dump_stack+0x5e/0x7c
[<        (ptrval)>] __warn+0xc6/0xdc
[<        (ptrval)>] warn_slowpath_null+0x2c/0x3e
[<        (ptrval)>] riscv_irq_enable+0x8e/0x94
[<        (ptrval)>] irq_enable+0x3a/0x6a
[<        (ptrval)>] __irq_startup+0x80/0x88
[<        (ptrval)>] irq_startup+0x4e/0xe2
[<        (ptrval)>] irq_activate_and_startup+0x1c/0x28
[<        (ptrval)>] __irq_do_set_handler+0x6e/0x134
[<        (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[<        (ptrval)>] plic_init+0x216/0x34a
[<        (ptrval)>] of_irq_init+0x132/0x232
[<        (ptrval)>] irqchip_init+0x10/0x1c
[<        (ptrval)>] init_IRQ+0x8/0x14
[<        (ptrval)>] start_kernel+0x1f6/0x32c
[<        (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x        (ptrval) (512 bytes)
Zone ranges:
  DMA32    empty
  Normal   [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @        (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on.  Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[<        (ptrval)>] walk_stackframe+0x0/0xa2
[<        (ptrval)>] show_stack+0x26/0x34
[<        (ptrval)>] dump_stack+0x5e/0x7c
[<        (ptrval)>] __warn+0xc6/0xdc
[<        (ptrval)>] warn_slowpath_null+0x2c/0x3e
[<        (ptrval)>] riscv_irq_enable+0x8e/0x94
[<        (ptrval)>] irq_enable+0x3a/0x6a
[<        (ptrval)>] __irq_startup+0x80/0x88
[<        (ptrval)>] irq_startup+0x4e/0xe2
[<        (ptrval)>] irq_activate_and_startup+0x1c/0x28
[<        (ptrval)>] __irq_do_set_handler+0x6e/0x134
[<        (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[<        (ptrval)>] plic_init+0x216/0x34a
[<        (ptrval)>] of_irq_init+0x132/0x232
[<        (ptrval)>] irqchip_init+0x10/0x1c
[<        (ptrval)>] init_IRQ+0x8/0x14
[<        (ptrval)>] start_kernel+0x1f6/0x32c
[<        (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Thu Feb 22 05:36:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe12:3456/64 scope link tentative 
       valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0 
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 

Welcome to the Fedora/RISC-V stage4 builder

+ set -e
+ dnf clean all
0 files removed
+ useradd -d /builddir mockbuild
+ su -c 'mkdir /builddir/build' mockbuild
+ echo '%_topdir /builddir/build'
+ su -c 'rpm -i /var/tmp/mimetic-0.9.8-6.fc25.src.rpm' mockbuild
+ dnf -y builddep /builddir/build/SPECS/mimetic.spec
Local RPMS            0% [                    ] ---  B/s |   0  B     --:-- ETA
Local RPMS            7% [=-                  ] 3.0 MB/s | 925 kB     00:03 ETA
Local RPMS           15% [===                 ] 3.0 MB/s | 1.8 MB     00:03 ETA
Local RPMS           24% [====-               ] 3.0 MB/s | 2.8 MB     00:02 ETA
Local RPMS           33% [======-             ] 3.1 MB/s | 3.9 MB     00:02 ETA
Local RPMS           42% [========-           ] 3.1 MB/s | 5.0 MB     00:02 ETA
Local RPMS           51% [==========          ] 3.1 MB/s | 6.0 MB     00:01 ETA
Local RPMS           59% [===========-        ] 2.9 MB/s | 6.9 MB     00:01 ETA
Local RPMS           67% [=============-      ] 2.9 MB/s | 7.9 MB     00:01 ETA
Local RPMS           75% [===============     ] 3.0 MB/s | 8.8 MB     00:00 ETA
Local RPMS           84% [================-   ] 3.0 MB/s | 9.8 MB     00:00 ETA
Local RPMS           92% [==================- ] 3.0 MB/s |  11 MB     00:00 ETA
Local RPMS                                      2.5 MB/s |  12 MB     00:04    
Last metadata expiration check: 0:01:19 ago on Thu Feb 22 05:36:34 2018.
Package findutils-1:4.6.0-14.fc27.riscv64 is already installed, skipping.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
 Package         Arch            Version                    Repository     Size
================================================================================
Installing:
 doxygen         riscv64         1:1.8.12-1.fc27            local         4.0 M
 make            riscv64         1:4.2.1-6.fc27             local         486 k

Transaction Summary
================================================================================
Install  2 Packages

Total download size: 4.5 M
Installed size: 16 M
Downloading Packages:
(1/2): doxygen-1.8.1  0% [                    ] ---  B/s |   0  B     --:-- ETA
(1-2/2): make-4.2.1- 18% [===-                ] 2.7 MB/s | 847 kB     00:01 ETA
(1/2): make-4.2.1-6.fc27.riscv64.rpm            1.2 MB/s | 486 kB     00:00    
(2/2): doxygen-1.8.1 21% [====                ] 2.7 MB/s | 982 kB     00:01 ETA
(2/2): doxygen-1.8.1 40% [========            ] 2.7 MB/s | 1.8 MB     00:00 ETA
(2/2): doxygen-1.8.1 59% [===========-        ] 2.7 MB/s | 2.7 MB     00:00 ETA
(2/2): doxygen-1.8.1 79% [===============-    ] 2.7 MB/s | 3.6 MB     00:00 ETA
(2/2): doxygen-1.8.1 98% [===================-] 2.7 MB/s | 4.5 MB     00:00 ETA
(2/2): doxygen-1.8.12-1.fc27.riscv64.rpm        1.9 MB/s | 4.0 MB     00:02    
--------------------------------------------------------------------------------
Total                                           2.1 MB/s | 4.5 MB     00:02     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction

  Preparing        :  [=========================                          ] 1/1
  Preparing        :                                                        1/1 

  Installing       : make-1:4.2.1-6.fc27.riscv [                          ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=                         ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [==                        ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [===                       ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [====                      ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=====                     ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [======                    ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=======                   ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [========                  ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=========                 ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [==========                ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [===========               ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [============              ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=============             ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [==============            ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [===============           ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [================          ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=================         ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [==================        ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [===================       ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [====================      ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=====================     ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [======================    ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [=======================   ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [========================  ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv [========================= ] 1/2
  Installing       : make-1:4.2.1-6.fc27.riscv64                            1/2 

  Running scriptlet: make-1:4.2.1-6.fc27.riscv64                            1/2 

  Installing       : doxygen-1:1.8.12-1.fc27.r [                          ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=                         ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [==                        ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [===                       ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [====                      ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=====                     ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [======                    ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=======                   ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [========                  ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=========                 ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [==========                ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [===========               ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [============              ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=============             ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [==============            ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [===============           ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [================          ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=================         ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [==================        ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [===================       ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [====================      ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=====================     ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [======================    ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [=======================   ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [========================  ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.r [========================= ] 2/2
  Installing       : doxygen-1:1.8.12-1.fc27.riscv64                        2/2 

  Running scriptlet: doxygen-1:1.8.12-1.fc27.riscv64                        2/2 

  Verifying        : doxygen-1:1.8.12-1.fc27.riscv64                        1/2 

  Verifying        : make-1:4.2.1-6.fc27.riscv64                            2/2 

Installed:
  doxygen.riscv64 1:1.8.12-1.fc27          make.riscv64 1:4.2.1-6.fc27         

Complete!
+ dnf -y update --best
Last metadata expiration check: 0:00:01 ago on Thu Feb 22 05:38:50 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y group install buildsys-build
Last metadata expiration check: 0:00:20 ago on Thu Feb 22 05:38:50 2018.
No match for group package "gcc-c++"
No match for group package "gcc"
Dependencies resolved.
================================================================================
 Group                         Packages                                       
================================================================================
Marking packages as installed by the group:
 @Buildsystem building group   which            util-linux   sed              
                               diffutils        info         patch            
                               shadow-utils     coreutils    findutils        
                               gawk             rpm-build    xz               
                               fedora-release   bash         redhat-rpm-config
                               bzip2            grep         tar              
                               cpio             make         unzip            
                               gzip                                           
================================================================================
 Package                  Arch        Version                   Repository
                                                                           Size
================================================================================
Installing group packages:
 bzip2                    riscv64     1.0.6-24.fc28             local      81 k
 diffutils                riscv64     3.6-3.fc28                local     577 k
 patch                    riscv64     2.7.5-6.fc27              local     270 k
 redhat-rpm-config        noarch      96-1.fc28.0.riscv64       local      75 k
 rpm-build                riscv64     4.14.1-6.fc28.1           local     235 k
 tar                      riscv64     2:1.29-7.fc27             local     805 k
 unzip                    riscv64     6.0-36.fc28               local     398 k
 which                    riscv64     2.21-4.fc28               local      65 k
 xz                       riscv64     5.2.3-5.fc28              local     212 k
Installing dependencies:
 binutils                 riscv64     2.30-1.fc28               local     6.9 M
 dwz                      riscv64     0.12-5.fc28               local     108 k
 elfutils                 riscv64     0.170-4.fc28              local     791 k
 file                     riscv64     5.32-3.fc28               local      81 k
 fpc-srpm-macros          noarch      1.1-4.fc28                local     7.5 k
 ghc-srpm-macros          noarch      1.4.2-7.fc28              local     8.2 k
 gnat-srpm-macros         noarch      4-5.fc28                  local     8.8 k
 go-srpm-macros           noarch      2-11.fc28                 local     8.4 k
 libpkgconf               riscv64     1.4.1-1.fc27              local      74 k
 nim-srpm-macros          noarch      1-1.fc28                  local     7.6 k
 ocaml-srpm-macros        noarch      5-2.fc27                  local     7.8 k
 openblas-srpm-macros     noarch      2-2.fc27                  local     6.6 k
 perl-srpm-macros         noarch      1-26.fc28                 local     9.7 k
 pkgconf                  riscv64     1.4.1-1.fc27              local      35 k
 pkgconf-m4               noarch      1.4.1-1.fc27              local      15 k
 pkgconf-pkg-config       riscv64     1.4.1-1.fc27              local      14 k
 python-srpm-macros       noarch      3-26.fc28                 local      10 k
 qt5-srpm-macros          noarch      5.10.0-1.fc28             local     9.0 k
 rust-srpm-macros         noarch      5-1.fc28                  local     8.0 k
 zip                      riscv64     3.0-20.fc28               local     271 k
 zstd                     riscv64     1.3.3-1.fc27              local     1.1 M

Transaction Summary
================================================================================
Install  30 Packages

Total download size: 12 M
Installed size: 49 M
Downloading Packages:
(1/30): tar-1.29-7.f  0% [                    ] ---  B/s |   0  B     --:-- ETA
(1/30): redhat-rpm-config-96-1.fc28.0.riscv64.n 762 kB/s |  75 kB     00:00    
(2-3/30): diffutils-  1% [                    ] 1.5 MB/s | 235 kB     00:08 ETA
(2/30): nim-srpm-macros-1-1.fc28.noarch.rpm     307 kB/s | 7.6 kB     00:00    
(3-4/30): diffutils-  2% [                    ] 1.5 MB/s | 274 kB     00:08 ETA
(3/30): ocaml-srpm-macros-5-2.fc27.noarch.rpm   270 kB/s | 7.8 kB     00:00    
(4-5/30): diffutils-  2% [-                   ] 1.5 MB/s | 314 kB     00:08 ETA
(4/30): openblas-srpm-macros-2-2.fc27.noarch.rp 233 kB/s | 6.6 kB     00:00    
(5-6/30): diffutils-  2% [-                   ] 1.5 MB/s | 353 kB     00:08 ETA
(5/30): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 349 kB/s | 9.0 kB     00:00    
(6-7/30): diffutils-  3% [-                   ] 1.5 MB/s | 394 kB     00:08 ETA
(6/30): rust-srpm-macros-5-1.fc28.noarch.rpm    320 kB/s | 8.0 kB     00:00    
(7-8/30): diffutils-  3% [-                   ] 1.4 MB/s | 434 kB     00:08 ETA
(7/30): rpm-build-4.14.1-6.fc28.1.riscv64.rpm   904 kB/s | 235 kB     00:00    
(8-9/30): tar-1.29-7  9% [=-                  ] 1.5 MB/s | 1.1 MB     00:07 ETA
(8/30): diffutils-3.6-3.fc28.riscv64.rpm        610 kB/s | 577 kB     00:00    
(9-10/30): tar-1.29- 13% [==-                 ] 1.5 MB/s | 1.7 MB     00:06 ETA
(9/30): which-2.21-4.fc28.riscv64.rpm           741 kB/s |  65 kB     00:00    
(10-11/30): tar-1.29 15% [===                 ] 1.5 MB/s | 1.9 MB     00:06 ETA
(10/30): tar-1.29-7.fc27.riscv64.rpm            596 kB/s | 805 kB     00:01    
(11-12/30): zstd-1.3 18% [===-                ] 1.5 MB/s | 2.3 MB     00:06 ETA
(11/30): patch-2.7.5-6.fc27.riscv64.rpm         644 kB/s | 270 kB     00:00    
(12-13/30): zstd-1.3 22% [====                ] 1.6 MB/s | 2.7 MB     00:06 ETA
(12/30): xz-5.2.3-5.fc28.riscv64.rpm            885 kB/s | 212 kB     00:00    
(13-14/30): unzip-6. 27% [=====               ] 1.6 MB/s | 3.3 MB     00:05 ETA
(13/30): unzip-6.0-36.fc28.riscv64.rpm          727 kB/s | 398 kB     00:00    
(14-15/30): bzip2-1. 28% [=====-              ] 1.6 MB/s | 3.5 MB     00:05 ETA
(14/30): bzip2-1.0.6-24.fc28.riscv64.rpm        421 kB/s |  81 kB     00:00    
(15-16/30): elfutils 29% [=====-              ] 1.6 MB/s | 3.6 MB     00:05 ETA
(15/30): file-5.32-3.fc28.riscv64.rpm           728 kB/s |  81 kB     00:00    
(16-17/30): elfutils 31% [======              ] 1.6 MB/s | 3.8 MB     00:05 ETA
(16/30): zstd-1.3.3-1.fc27.riscv64.rpm          647 kB/s | 1.1 MB     00:01    
(17-18/30): binutils 36% [=======             ] 1.6 MB/s | 4.4 MB     00:04 ETA
(17/30): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 435 kB/s |  14 kB     00:00    
(18-19/30): binutils 37% [=======             ] 1.6 MB/s | 4.5 MB     00:04 ETA
(18/30): pkgconf-m4-1.4.1-1.fc27.noarch.rpm     561 kB/s |  15 kB     00:00    
(19-20/30): binutils 37% [=======             ] 1.6 MB/s | 4.5 MB     00:04 ETA
(19/30): pkgconf-1.4.1-1.fc27.riscv64.rpm       610 kB/s |  35 kB     00:00    
(20-21/30): elfutils 38% [=======-            ] 1.6 MB/s | 4.7 MB     00:04 ETA
(20/30): libpkgconf-1.4.1-1.fc27.riscv64.rpm    782 kB/s |  74 kB     00:00    
(21-22/30): elfutils 40% [========            ] 1.6 MB/s | 4.9 MB     00:04 ETA
(21/30): fpc-srpm-macros-1.1-4.fc28.noarch.rpm  286 kB/s | 7.5 kB     00:00    
(22-23/30): elfutils 40% [========            ] 1.6 MB/s | 4.9 MB     00:04 ETA
(22/30): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 324 kB/s | 8.2 kB     00:00    
(23-24/30): elfutils 40% [========            ] 1.6 MB/s | 5.0 MB     00:04 ETA
(23/30): gnat-srpm-macros-4-5.fc28.noarch.rpm   334 kB/s | 8.8 kB     00:00    
(24-25/30): elfutils 41% [========            ] 1.6 MB/s | 5.0 MB     00:04 ETA
(24/30): go-srpm-macros-2-11.fc28.noarch.rpm    338 kB/s | 8.4 kB     00:00    
(25-26/30): elfutils 41% [========            ] 1.6 MB/s | 5.0 MB     00:04 ETA
(25/30): perl-srpm-macros-1-26.fc28.noarch.rpm  381 kB/s | 9.7 kB     00:00    
(26-27/30): elfutils 41% [========            ] 1.6 MB/s | 5.1 MB     00:04 ETA
(26/30): python-srpm-macros-3-26.fc28.noarch.rp 394 kB/s |  10 kB     00:00    
(27-28/30): elfutils 42% [========            ] 1.5 MB/s | 5.1 MB     00:04 ETA
(27/30): dwz-0.12-5.fc28.riscv64.rpm            871 kB/s | 108 kB     00:00    
(28-29/30): elfutils 44% [========-           ] 1.6 MB/s | 5.5 MB     00:04 ETA
(28/30): elfutils-0.170-4.fc28.riscv64.rpm      516 kB/s | 791 kB     00:01    
(29-30/30): binutils 46% [=========           ] 1.5 MB/s | 5.7 MB     00:04 ETA
(29/30): zip-3.0-20.fc28.riscv64.rpm            771 kB/s | 271 kB     00:00    
(30/30): binutils-2. 49% [=========-          ] 1.6 MB/s | 6.1 MB     00:03 ETA
(30/30): binutils-2. 56% [===========         ] 1.6 MB/s | 6.9 MB     00:03 ETA
(30/30): binutils-2. 63% [============-       ] 1.7 MB/s | 7.7 MB     00:02 ETA
(30/30): binutils-2. 70% [==============      ] 1.8 MB/s | 8.6 MB     00:01 ETA
(30/30): binutils-2. 77% [===============-    ] 1.8 MB/s | 9.4 MB     00:01 ETA
(30/30): binutils-2. 84% [================-   ] 1.9 MB/s |  10 MB     00:00 ETA
(30/30): binutils-2. 91% [==================  ] 2.0 MB/s |  11 MB     00:00 ETA
(30/30): binutils-2. 98% [===================-] 2.0 MB/s |  12 MB     00:00 ETA
(30/30): binutils-2.30-1.fc28.riscv64.rpm       1.6 MB/s | 6.9 MB     00:04    
--------------------------------------------------------------------------------
Total                                           1.8 MB/s |  12 MB     00:06     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction

  Preparing        :  [=                                                  ] 1/1
  Preparing        :  [===                                                ] 1/1
  Preparing        :  [=====                                              ] 1/1
  Preparing        :  [======                                             ] 1/1
  Preparing        :  [========                                           ] 1/1
  Preparing        :  [==========                                         ] 1/1
  Preparing        :  [===========                                        ] 1/1
  Preparing        :  [=============                                      ] 1/1
  Preparing        :  [===============                                    ] 1/1
  Preparing        :  [================                                   ] 1/1
  Preparing        :  [==================                                 ] 1/1
  Preparing        :  [====================                               ] 1/1
  Preparing        :  [=====================                              ] 1/1
  Preparing        :  [=======================                            ] 1/1
  Preparing        :  [=========================                          ] 1/1
  Preparing        :  [===========================                        ] 1/1
  Preparing        :  [============================                       ] 1/1
  Preparing        :  [==============================                     ] 1/1
  Preparing        :  [================================                   ] 1/1
  Preparing        :  [=================================                  ] 1/1
  Preparing        :  [===================================                ] 1/1
  Preparing        :  [=====================================              ] 1/1
  Preparing        :  [======================================             ] 1/1
  Preparing        :  [========================================           ] 1/1
  Preparing        :  [==========================================         ] 1/1
  Preparing        :  [===========================================        ] 1/1
  Preparing        :  [=============================================      ] 1/1
  Preparing        :  [===============================================    ] 1/1
  Preparing        :  [================================================   ] 1/1
  Preparing        :                                                        1/1 

  Installing       : file-5.32-3.fc28.riscv64 [                         ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [======                   ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [===========              ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [==================       ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [=====================    ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [======================   ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [=======================  ]  1/30
  Installing       : file-5.32-3.fc28.riscv64 [======================== ]  1/30
  Installing       : file-5.32-3.fc28.riscv64                              1/30 

  Installing       : unzip-6.0-36.fc28.riscv6 [                         ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=                        ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [==                       ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [===                      ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [====                     ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=====                    ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [======                   ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=======                  ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [========                 ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=========                ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [==========               ]  2/30random: crng init done

  Installing       : unzip-6.0-36.fc28.riscv6 [===========              ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [============             ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=============            ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [==============           ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [===============          ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [================         ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=================        ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [==================       ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [===================      ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [====================     ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=====================    ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [======================   ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [=======================  ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv6 [======================== ]  2/30
  Installing       : unzip-6.0-36.fc28.riscv64                             2/30 

  Installing       : zip-3.0-20.fc28.riscv64 [                          ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=                         ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [==                        ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [===                       ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [====                      ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=====                     ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [======                    ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=======                   ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [========                  ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=========                 ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [==========                ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [===========               ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [============              ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=============             ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [==============            ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [===============           ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [================          ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=================         ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [==================        ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [===================       ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [====================      ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=====================     ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [======================    ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [=======================   ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [========================  ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64 [========================= ]  3/30
  Installing       : zip-3.0-20.fc28.riscv64                               3/30 

  Installing       : dwz-0.12-5.fc28.riscv64 [                          ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [===                       ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [=======                   ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [===========               ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [===============           ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [==================        ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [=====================     ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64 [========================= ]  4/30
  Installing       : dwz-0.12-5.fc28.riscv64                               4/30 

  Installing       : python-srpm-macros-3-26. [                         ]  5/30
  Installing       : python-srpm-macros-3-26. [=======================  ]  5/30
  Installing       : python-srpm-macros-3-26.fc28.noarch                   5/30 

  Installing       : perl-srpm-macros-1-26.fc [                         ]  6/30
  Installing       : perl-srpm-macros-1-26.fc [======================   ]  6/30
  Installing       : perl-srpm-macros-1-26.fc28.noarch                     6/30 

  Installing       : go-srpm-macros-2-11.fc28 [                         ]  7/30
  Installing       : go-srpm-macros-2-11.fc28 [======================   ]  7/30
  Installing       : go-srpm-macros-2-11.fc28.noarch                       7/30 

  Installing       : gnat-srpm-macros-4-5.fc2 [                         ]  8/30
  Installing       : gnat-srpm-macros-4-5.fc2 [======================   ]  8/30
  Installing       : gnat-srpm-macros-4-5.fc28.noarch                      8/30 

  Installing       : ghc-srpm-macros-1.4.2-7. [                         ]  9/30
  Installing       : ghc-srpm-macros-1.4.2-7. [====================     ]  9/30
  Installing       : ghc-srpm-macros-1.4.2-7.fc28.noarch                   9/30 

  Installing       : fpc-srpm-macros-1.1-4.fc [                         ] 10/30
  Installing       : fpc-srpm-macros-1.1-4.fc [=================        ] 10/30
  Installing       : fpc-srpm-macros-1.1-4.fc28.noarch                    10/30 

  Installing       : libpkgconf-1.4.1-1.fc27. [                         ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [===                      ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [=======                  ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [===========              ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [==============           ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [==================       ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [======================   ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27. [======================== ] 11/30
  Installing       : libpkgconf-1.4.1-1.fc27.riscv64                      11/30 

  Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64                      11/30 

  Installing       : pkgconf-1.4.1-1.fc27.ris [                         ] 12/30
  Installing       : pkgconf-1.4.1-1.fc27.ris [=============            ] 12/30
  Installing       : pkgconf-1.4.1-1.fc27.ris [===============          ] 12/30
  Installing       : pkgconf-1.4.1-1.fc27.ris [====================     ] 12/30
  Installing       : pkgconf-1.4.1-1.fc27.ris [======================   ] 12/30
  Installing       : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/30
  Installing       : pkgconf-1.4.1-1.fc27.riscv64                         12/30 

  Installing       : pkgconf-m4-1.4.1-1.fc27. [                         ] 13/30
  Installing       : pkgconf-m4-1.4.1-1.fc27. [=====================    ] 13/30
  Installing       : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/30
  Installing       : pkgconf-m4-1.4.1-1.fc27.noarch                       13/30 

  Installing       : pkgconf-pkg-config-1.4.1 [                         ] 14/30
  Installing       : pkgconf-pkg-config-1.4.1 [====                     ] 14/30
  Installing       : pkgconf-pkg-config-1.4.1 [=====                    ] 14/30
  Installing       : pkgconf-pkg-config-1.4.1 [=======================  ] 14/30
  Installing       : pkgconf-pkg-config-1.4.1 [======================== ] 14/30
  Installing       : pkgconf-pkg-config-1.4.1-1.fc27.riscv64              14/30 

  Installing       : binutils-2.30-1.fc28.ris [                         ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=                        ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [==                       ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [===                      ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [====                     ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=====                    ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [======                   ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=======                  ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [========                 ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=========                ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [==========               ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [===========              ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [============             ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=============            ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [==============           ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [===============          ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [================         ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=================        ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [==================       ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [===================      ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [====================     ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=====================    ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [======================   ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [=======================  ] 15/30
  Installing       : binutils-2.30-1.fc28.ris [======================== ] 15/30
  Installing       : binutils-2.30-1.fc28.riscv64                         15/30 

  Running scriptlet: binutils-2.30-1.fc28.riscv64                         15/30 

  Installing       : elfutils-0.170-4.fc28.ri [                         ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=                        ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [==                       ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [===                      ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [====                     ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=====                    ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [======                   ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=======                  ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [========                 ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=========                ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [==========               ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [===========              ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [============             ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=============            ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [==============           ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [===============          ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [================         ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=================        ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [==================       ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [===================      ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [====================     ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=====================    ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [======================   ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [=======================  ] 16/30
  Installing       : elfutils-0.170-4.fc28.ri [======================== ] 16/30
  Installing       : elfutils-0.170-4.fc28.riscv64                        16/30 

  Installing       : bzip2-1.0.6-24.fc28.risc [                         ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [=====                    ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [==========               ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [==============           ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [===================      ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [=====================    ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [=======================  ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.risc [======================== ] 17/30
  Installing       : bzip2-1.0.6-24.fc28.riscv64                          17/30 

  Installing       : xz-5.2.3-5.fc28.riscv64 [                          ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=                         ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [==                        ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [===                       ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=====                     ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [======                    ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=======                   ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=========                 ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [==========                ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [===========               ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [============              ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=============             ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [==============            ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [===============           ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [================          ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [==================        ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [===================       ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [====================      ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=====================     ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [======================    ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [=======================   ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [========================  ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64 [========================= ] 18/30
  Installing       : xz-5.2.3-5.fc28.riscv64                              18/30 

  Installing       : patch-2.7.5-6.fc27.riscv [                         ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=                        ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [==                       ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [===                      ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [====                     ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=====                    ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [======                   ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=======                  ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [========                 ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=========                ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [==========               ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [===========              ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [============             ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=============            ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [==============           ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [===============          ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [================         ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=================        ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [==================       ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [===================      ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [====================     ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=====================    ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [======================   ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [=======================  ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv [======================== ] 19/30
  Installing       : patch-2.7.5-6.fc27.riscv64                           19/30 

  Installing       : zstd-1.3.3-1.fc27.riscv6 [                         ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=                        ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [==                       ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [===                      ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [====                     ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=====                    ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [======                   ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=======                  ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [========                 ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=========                ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [==========               ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [===========              ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [============             ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=============            ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [==============           ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [===============          ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [================         ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=================        ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [==================       ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [===================      ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [====================     ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=====================    ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [======================   ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [=======================  ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv6 [======================== ] 20/30
  Installing       : zstd-1.3.3-1.fc27.riscv64                            20/30 

  Installing       : rust-srpm-macros-5-1.fc2 [                         ] 21/30
  Installing       : rust-srpm-macros-5-1.fc2 [===                      ] 21/30
  Installing       : rust-srpm-macros-5-1.fc2 [=====                    ] 21/30
  Installing       : rust-srpm-macros-5-1.fc2 [=======================  ] 21/30
  Installing       : rust-srpm-macros-5-1.fc28.noarch                     21/30 

  Installing       : qt5-srpm-macros-5.10.0-1 [                         ] 22/30
  Installing       : qt5-srpm-macros-5.10.0-1 [====================     ] 22/30
  Installing       : qt5-srpm-macros-5.10.0-1.fc28.noarch                 22/30 

  Installing       : openblas-srpm-macros-2-2 [                         ] 23/30
  Installing       : openblas-srpm-macros-2-2 [================         ] 23/30
  Installing       : openblas-srpm-macros-2-2.fc27.noarch                 23/30 

  Installing       : ocaml-srpm-macros-5-2.fc [                         ] 24/30
  Installing       : ocaml-srpm-macros-5-2.fc [=====================    ] 24/30
  Installing       : ocaml-srpm-macros-5-2.fc27.noarch                    24/30 

  Installing       : nim-srpm-macros-1-1.fc28 [                         ] 25/30
  Installing       : nim-srpm-macros-1-1.fc28 [===                      ] 25/30
  Installing       : nim-srpm-macros-1-1.fc28 [=====                    ] 25/30
  Installing       : nim-srpm-macros-1-1.fc28 [=======================  ] 25/30
  Installing       : nim-srpm-macros-1-1.fc28.noarch                      25/30 

  Installing       : redhat-rpm-config-96-1.f [                         ] 26/30
  Installing       : redhat-rpm-config-96-1.f [==                       ] 26/30
  Installing       : redhat-rpm-config-96-1.f [===                      ] 26/30
  Installing       : redhat-rpm-config-96-1.f [=========                ] 26/30
  Installing       : redhat-rpm-config-96-1.f [===========              ] 26/30
  Installing       : redhat-rpm-config-96-1.f [=================        ] 26/30
  Installing       : redhat-rpm-config-96-1.f [==================       ] 26/30
  Installing       : redhat-rpm-config-96-1.f [===================      ] 26/30
  Installing       : redhat-rpm-config-96-1.f [=====================    ] 26/30
  Installing       : redhat-rpm-config-96-1.f [======================   ] 26/30
  Installing       : redhat-rpm-config-96-1.f [======================== ] 26/30
  Installing       : redhat-rpm-config-96-1.fc28.0.riscv64.noarch         26/30 

  Installing       : diffutils-3.6-3.fc28.ris [                         ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=                        ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [==                       ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [===                      ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [====                     ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=====                    ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [======                   ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=======                  ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [========                 ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=========                ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [==========               ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [===========              ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [============             ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=============            ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [==============           ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [===============          ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [================         ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=================        ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [==================       ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [===================      ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [====================     ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=====================    ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [======================   ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [=======================  ] 27/30
  Installing       : diffutils-3.6-3.fc28.ris [======================== ] 27/30
  Installing       : diffutils-3.6-3.fc28.riscv64                         27/30 

  Running scriptlet: diffutils-3.6-3.fc28.riscv64                         27/30 

  Installing       : tar-2:1.29-7.fc27.riscv6 [                         ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=                        ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [==                       ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [===                      ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [====                     ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=====                    ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [======                   ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=======                  ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [========                 ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=========                ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [==========               ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [===========              ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [============             ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=============            ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [==============           ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [===============          ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [================         ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=================        ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [==================       ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [===================      ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [====================     ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=====================    ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [======================   ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [=======================  ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv6 [======================== ] 28/30
  Installing       : tar-2:1.29-7.fc27.riscv64                            28/30 

  Running scriptlet: tar-2:1.29-7.fc27.riscv64                            28/30 

  Installing       : rpm-build-4.14.1-6.fc28. [                         ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [=                        ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [==                       ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [===                      ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [====                     ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [=====                    ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [======                   ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [=======                  ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [========                 ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [=========                ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [===========              ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [============             ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [==============           ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [===============          ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [================         ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [=================        ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [==================       ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [===================      ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [====================     ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [=====================    ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [======================   ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28. [======================== ] 29/30
  Installing       : rpm-build-4.14.1-6.fc28.1.riscv64                    29/30 

  Installing       : which-2.21-4.fc28.riscv6 [                         ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [=====                    ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [===========              ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [===============          ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [================         ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [=================        ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [==================       ] 30/30
  Installing       : which-2.21-4.fc28.riscv6 [======================== ] 30/30
  Installing       : which-2.21-4.fc28.riscv64                            30/30 

  Running scriptlet: which-2.21-4.fc28.riscv64                            30/30 

  Verifying        : tar-2:1.29-7.fc27.riscv64                             1/30 

  Verifying        : diffutils-3.6-3.fc28.riscv64                          2/30 

  Verifying        : redhat-rpm-config-96-1.fc28.0.riscv64.noarch          3/30 

  Verifying        : nim-srpm-macros-1-1.fc28.noarch                       4/30 

  Verifying        : ocaml-srpm-macros-5-2.fc27.noarch                     5/30 

  Verifying        : openblas-srpm-macros-2-2.fc27.noarch                  6/30 

  Verifying        : qt5-srpm-macros-5.10.0-1.fc28.noarch                  7/30 

  Verifying        : rust-srpm-macros-5-1.fc28.noarch                      8/30 

  Verifying        : rpm-build-4.14.1-6.fc28.1.riscv64                     9/30 

  Verifying        : zstd-1.3.3-1.fc27.riscv64                            10/30 

  Verifying        : which-2.21-4.fc28.riscv64                            11/30 

  Verifying        : patch-2.7.5-6.fc27.riscv64                           12/30 

  Verifying        : unzip-6.0-36.fc28.riscv64                            13/30 

  Verifying        : xz-5.2.3-5.fc28.riscv64                              14/30 

  Verifying        : bzip2-1.0.6-24.fc28.riscv64                          15/30 

  Verifying        : elfutils-0.170-4.fc28.riscv64                        16/30 

  Verifying        : file-5.32-3.fc28.riscv64                             17/30 

  Verifying        : binutils-2.30-1.fc28.riscv64                         18/30 

  Verifying        : pkgconf-pkg-config-1.4.1-1.fc27.riscv64              19/30 

  Verifying        : pkgconf-m4-1.4.1-1.fc27.noarch                       20/30 

  Verifying        : pkgconf-1.4.1-1.fc27.riscv64                         21/30 

  Verifying        : libpkgconf-1.4.1-1.fc27.riscv64                      22/30 

  Verifying        : fpc-srpm-macros-1.1-4.fc28.noarch                    23/30 

  Verifying        : ghc-srpm-macros-1.4.2-7.fc28.noarch                  24/30 

  Verifying        : gnat-srpm-macros-4-5.fc28.noarch                     25/30 

  Verifying        : go-srpm-macros-2-11.fc28.noarch                      26/30 

  Verifying        : perl-srpm-macros-1-26.fc28.noarch                    27/30 

  Verifying        : python-srpm-macros-3-26.fc28.noarch                  28/30 

  Verifying        : dwz-0.12-5.fc28.riscv64                              29/30 

  Verifying        : zip-3.0-20.fc28.riscv64                              30/30 

Installed:
  bzip2.riscv64 1.0.6-24.fc28                                                   
  diffutils.riscv64 3.6-3.fc28                                                  
  patch.riscv64 2.7.5-6.fc27                                                    
  redhat-rpm-config.noarch 96-1.fc28.0.riscv64                                  
  rpm-build.riscv64 4.14.1-6.fc28.1                                             
  tar.riscv64 2:1.29-7.fc27                                                     
  unzip.riscv64 6.0-36.fc28                                                     
  which.riscv64 2.21-4.fc28                                                     
  xz.riscv64 5.2.3-5.fc28                                                       
  binutils.riscv64 2.30-1.fc28                                                  
  dwz.riscv64 0.12-5.fc28                                                       
  elfutils.riscv64 0.170-4.fc28                                                 
  file.riscv64 5.32-3.fc28                                                      
  fpc-srpm-macros.noarch 1.1-4.fc28                                             
  ghc-srpm-macros.noarch 1.4.2-7.fc28                                           
  gnat-srpm-macros.noarch 4-5.fc28                                              
  go-srpm-macros.noarch 2-11.fc28                                               
  libpkgconf.riscv64 1.4.1-1.fc27                                               
  nim-srpm-macros.noarch 1-1.fc28                                               
  ocaml-srpm-macros.noarch 5-2.fc27                                             
  openblas-srpm-macros.noarch 2-2.fc27                                          
  perl-srpm-macros.noarch 1-26.fc28                                             
  pkgconf.riscv64 1.4.1-1.fc27                                                  
  pkgconf-m4.noarch 1.4.1-1.fc27                                                
  pkgconf-pkg-config.riscv64 1.4.1-1.fc27                                       
  python-srpm-macros.noarch 3-26.fc28                                           
  qt5-srpm-macros.noarch 5.10.0-1.fc28                                          
  rust-srpm-macros.noarch 5-1.fc28                                              
  zip.riscv64 3.0-20.fc28                                                       
  zstd.riscv64 1.3.3-1.fc27                                                     

Complete!
+ dnf -y install hack-gcc glibc-devel
Last metadata expiration check: 0:02:11 ago on Thu Feb 22 05:38:50 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
 Package                Arch           Version               Repository    Size
================================================================================
Installing:
 glibc-devel            riscv64        2.27-4.fc28           local        1.0 M
Installing dependencies:
 glibc-headers          riscv64        2.27-4.fc28           local        442 k
 kernel-headers         noarch         4.15.0-1.fc27         local        1.1 M
 libxcrypt-devel        riscv64        4.0.0-4.fc28          local         15 k

Transaction Summary
================================================================================
Install  4 Packages

Total download size: 2.5 M
Installed size: 7.1 M
Downloading Packages:
(1/4): glibc-devel-2  0% [                    ] ---  B/s |   0  B     --:-- ETA
(1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 511 kB/s |  15 kB     00:00    
(2-3/4): glibc-devel  1% [                    ] 595 kB/s |  46 kB     00:04 ETA
(2-4/4): kernel-head 34% [======-             ] 729 kB/s | 894 kB     00:02 ETA
(2/4): glibc-headers-2.27-4.fc28.riscv64.rpm    780 kB/s | 442 kB     00:00    
(3-4/4): glibc-devel 52% [==========          ] 786 kB/s | 1.3 MB     00:01 ETA
(3-4/4): kernel-head 87% [=================-  ] 921 kB/s | 2.2 MB     00:00 ETA
(3/4): glibc-devel-2.27-4.fc28.riscv64.rpm      920 kB/s | 1.0 MB     00:01    
(4/4): kernel-header 95% [=================== ] 926 kB/s | 2.4 MB     00:00 ETA
(4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm  947 kB/s | 1.1 MB     00:01    
--------------------------------------------------------------------------------
Total                                           1.8 MB/s | 2.5 MB     00:01     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction

  Preparing        :  [============                                       ] 1/1
  Preparing        :  [=========================                          ] 1/1
  Preparing        :  [======================================             ] 1/1
  Preparing        :                                                        1/1 

  Installing       : kernel-headers-4.15.0-1.f [                          ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=                         ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [==                        ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [===                       ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [====                      ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=====                     ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [======                    ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=======                   ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [========                  ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=========                 ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [==========                ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [===========               ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [============              ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=============             ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [==============            ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [===============           ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [================          ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=================         ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [==================        ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [===================       ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [====================      ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=====================     ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [======================    ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [=======================   ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [========================  ] 1/4
  Installing       : kernel-headers-4.15.0-1.f [========================= ] 1/4
  Installing       : kernel-headers-4.15.0-1.fc27.noarch                    1/4 

  Running scriptlet: glibc-headers-2.27-4.fc28.riscv64                      2/4 

  Installing       : glibc-headers-2.27-4.fc28 [                          ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=                         ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [==                        ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [===                       ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [====                      ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=====                     ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [======                    ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=======                   ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [========                  ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=========                 ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [==========                ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [===========               ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [============              ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=============             ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [==============            ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [===============           ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [================          ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=================         ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [==================        ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [===================       ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [====================      ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=====================     ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [======================    ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [=======================   ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [========================  ] 2/4
  Installing       : glibc-headers-2.27-4.fc28 [========================= ] 2/4
  Installing       : glibc-headers-2.27-4.fc28.riscv64                      2/4 

  Installing       : libxcrypt-devel-4.0.0-4.f [                          ] 3/4
  Installing       : libxcrypt-devel-4.0.0-4.f [============              ] 3/4
  Installing       : libxcrypt-devel-4.0.0-4.f [=============             ] 3/4
  Installing       : libxcrypt-devel-4.0.0-4.f [=====================     ] 3/4
  Installing       : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4
  Installing       : libxcrypt-devel-4.0.0-4.fc28.riscv64                   3/4 

  Installing       : glibc-devel-2.27-4.fc28.r [                          ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=                         ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [==                        ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [===                       ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [====                      ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=====                     ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [======                    ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=======                   ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [========                  ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=========                 ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [==========                ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [===========               ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [============              ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=============             ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [==============            ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [===============           ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [================          ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=================         ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [==================        ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [===================       ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [====================      ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=====================     ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [======================    ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [=======================   ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [========================  ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.r [========================= ] 4/4
  Installing       : glibc-devel-2.27-4.fc28.riscv64                        4/4 

  Running scriptlet: glibc-devel-2.27-4.fc28.riscv64                        4/4 

  Verifying        : glibc-devel-2.27-4.fc28.riscv64                        1/4 

  Verifying        : glibc-headers-2.27-4.fc28.riscv64                      2/4 

  Verifying        : libxcrypt-devel-4.0.0-4.fc28.riscv64                   3/4 

  Verifying        : kernel-headers-4.15.0-1.fc27.noarch                    4/4 

Installed:
  glibc-devel.riscv64 2.27-4.fc28        glibc-headers.riscv64 2.27-4.fc28      
  kernel-headers.noarch 4.15.0-1.fc27    libxcrypt-devel.riscv64 4.0.0-4.fc28   

Complete!
+ touch /rootok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off