OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 01:34:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/lua-mpack-1.0.3-5.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/lua-mpack.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [=- ] 3.1 MB/s | 950 kB 00:03 ETA Local RPMS 14% [==- ] 3.0 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 3.1 MB/s | 2.8 MB 00:02 ETA Local RPMS 32% [======- ] 3.1 MB/s | 3.8 MB 00:02 ETA Local RPMS 41% [======== ] 3.1 MB/s | 4.8 MB 00:02 ETA Local RPMS 50% [========== ] 3.1 MB/s | 5.9 MB 00:01 ETA Local RPMS 59% [===========- ] 2.9 MB/s | 6.9 MB 00:01 ETA Local RPMS 67% [============= ] 2.9 MB/s | 7.8 MB 00:01 ETA Local RPMS 76% [=============== ] 3.0 MB/s | 8.9 MB 00:00 ETA Local RPMS 84% [================- ] 3.0 MB/s | 9.9 MB 00:00 ETA Local RPMS 93% [==================- ] 3.0 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 12 MB 00:04 Last metadata expiration check: 0:01:23 ago on Thu Feb 22 01:34:36 2018. sh: lua: command not found Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libtool riscv64 2.4.6-21.fc27 local 707 k lua riscv64 5.3.4-8.fc28 local 360 k lua-devel riscv64 5.3.4-8.fc28 local 28 k Installing dependencies: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k emacs-filesystem noarch 1:25.3-5.fc28 local 67 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k tar riscv64 2:1.29-7.fc27 local 805 k Transaction Summary ================================================================================ Install 46 Packages Total download size: 18 M Installed size: 55 M Downloading Packages: (1/46): libtool-2.4. 0% [ ] --- B/s | 0 B --:-- ETA (1-3/46): lua-5.3.4- 4% [- ] 2.7 MB/s | 831 kB 00:06 ETA (1/46): lua-5.3.4-8.fc28.riscv64.rpm 919 kB/s | 360 kB 00:00 (2-3/46): tar-1.29-7 5% [= ] 2.7 MB/s | 1.1 MB 00:06 ETA (2/46): lua-devel-5.3.4-8.fc28.riscv64.rpm 674 kB/s | 28 kB 00:00 (3-4/46): tar-1.29-7 6% [= ] 2.7 MB/s | 1.2 MB 00:06 ETA (3/46): pkgconf-pkg-config-1.4.1-1.fc27.riscv64 544 kB/s | 14 kB 00:00 (4-5/46): tar-1.29-7 6% [= ] 2.6 MB/s | 1.2 MB 00:06 ETA (4/46): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 606 kB/s | 15 kB 00:00 (5-6/46): tar-1.29-7 6% [= ] 2.6 MB/s | 1.3 MB 00:06 ETA (5/46): pkgconf-1.4.1-1.fc27.riscv64.rpm 651 kB/s | 35 kB 00:00 (6-7/46): tar-1.29-7 7% [= ] 2.6 MB/s | 1.4 MB 00:06 ETA (6/46): libpkgconf-1.4.1-1.fc27.riscv64.rpm 825 kB/s | 74 kB 00:00 (7-8/46): tar-1.29-7 8% [=- ] 2.6 MB/s | 1.6 MB 00:06 ETA (7/46): libtool-2.4.6-21.fc27.riscv64.rpm 676 kB/s | 707 kB 00:01 (8-9/46): tar-1.29-7 11% [== ] 2.6 MB/s | 2.1 MB 00:06 ETA (8/46): emacs-filesystem-25.3-5.fc28.noarch.rpm 788 kB/s | 67 kB 00:00 (9-10/46): tar-1.29- 12% [== ] 2.5 MB/s | 2.3 MB 00:06 ETA (9/46): tar-1.29-7.fc27.riscv64.rpm 631 kB/s | 805 kB 00:01 (10-11/46): autoconf 12% [==- ] 2.5 MB/s | 2.3 MB 00:06 ETA (10/46): perl-Carp-1.42-408.fc27.0.riscv64.noar 794 kB/s | 84 kB 00:00 (11-12/46): autoconf 14% [==- ] 2.5 MB/s | 2.6 MB 00:06 ETA (11/46): perl-Exporter-5.72-408.fc27.0.riscv64. 811 kB/s | 87 kB 00:00 (12-13/46): autoconf 15% [=== ] 2.5 MB/s | 2.9 MB 00:06 ETA (12/46): perl-File-Path-2.15-1.fc27.noarch.rpm 645 kB/s | 37 kB 00:00 (13-14/46): autoconf 16% [=== ] 2.4 MB/s | 3.0 MB 00:06 ETA (13/46): perl-Getopt-Long-2.50-3.fc27.noarch.rp 797 kB/s | 61 kB 00:00 (14-15/46): autoconf 17% [=== ] 2.4 MB/s | 3.2 MB 00:06 ETA (14/46): perl-Thread-Queue-3.12-408.fc27.0.risc 836 kB/s | 77 kB 00:00 (15-16/46): autoconf 18% [===- ] 2.4 MB/s | 3.4 MB 00:06 ETA (15/46): autoconf-2.69-26.fc28.noarch.rpm 576 kB/s | 709 kB 00:01 (16-17/46): perl-con 19% [===- ] 2.4 MB/s | 3.6 MB 00:06 ETA (16/46): perl-constant-1.33-408.fc27.0.riscv64. 425 kB/s | 79 kB 00:00 (17/46): automake-1. 19% [===- ] 2.4 MB/s | 3.6 MB 00:06 ETA (17/46): perl-Errno-1.28-408.fc28.1.riscv64.ris 614 kB/s | 73 kB 00:00 (18-19/46): perl-lib 20% [==== ] 2.4 MB/s | 3.9 MB 00:06 ETA (18/46): automake-1.15.1-3.fc28.noarch.rpm 548 kB/s | 706 kB 00:01 (19-20/46): perl-int 23% [====- ] 2.3 MB/s | 4.3 MB 00:06 ETA (19/46): perl-IO-1.38-408.fc28.1.riscv64.riscv6 855 kB/s | 176 kB 00:00 (20-21/46): perl-int 26% [===== ] 2.3 MB/s | 4.9 MB 00:05 ETA (20/46): perl-PathTools-3.67-408.fc27.0.riscv64 892 kB/s | 166 kB 00:00 (21-22/46): perl-int 29% [=====- ] 2.3 MB/s | 5.4 MB 00:05 ETA (21/46): perl-threads-2.21-1.fc27.riscv64.rpm 873 kB/s | 104 kB 00:00 (22-23/46): perl-lib 30% [====== ] 2.3 MB/s | 5.7 MB 00:05 ETA (22/46): perl-Text-ParseWords-3.30-408.fc27.0.r 807 kB/s | 73 kB 00:00 (23-24/46): perl-lib 32% [====== ] 2.3 MB/s | 5.9 MB 00:05 ETA (23-25/46): m4-1.4.1 36% [======= ] 2.4 MB/s | 6.8 MB 00:04 ETA (23/46): m4-1.4.18-5.fc28.riscv64.rpm 741 kB/s | 369 kB 00:00 (24-25/46): perl-lib 38% [=======- ] 2.3 MB/s | 7.0 MB 00:04 ETA (24/46): perl-Data-Dumper-2.167-408.fc27.0.risc 860 kB/s | 149 kB 00:00 (25-26/46): perl-lib 40% [======== ] 2.3 MB/s | 7.5 MB 00:04 ETA (25/46): perl-Text-Tabs+Wrap-2013.0523-408.fc27 867 kB/s | 80 kB 00:00 (26-27/46): perl-int 41% [======== ] 2.3 MB/s | 7.7 MB 00:04 ETA (26/46): perl-parent-0.236-408.fc27.0.riscv64.n 796 kB/s | 71 kB 00:00 (27-28/46): perl-int 43% [========- ] 2.3 MB/s | 7.9 MB 00:04 ETA (27/46): perl-Scalar-List-Utils-1.48-1.fc27.ris 864 kB/s | 119 kB 00:00 (28-29/46): perl-int 44% [========- ] 2.3 MB/s | 8.3 MB 00:04 ETA (28/46): perl-Unicode-Normalize-1.25-408.fc27.0 914 kB/s | 164 kB 00:00 (29-30/46): perl-int 47% [=========- ] 2.3 MB/s | 8.8 MB 00:04 ETA (29/46): perl-macros-5.26.1-408.fc28.1.riscv64. 775 kB/s | 69 kB 00:00 (30-31/46): perl-int 48% [=========- ] 2.3 MB/s | 9.0 MB 00:04 ETA (30/46): perl-threads-shared-1.58-1.fc27.riscv6 866 kB/s | 91 kB 00:00 (31-32/46): perl-int 50% [========== ] 2.3 MB/s | 9.3 MB 00:04 ETA (31/46): perl-Socket-2.027-1.fc27.riscv64.rpm 883 kB/s | 95 kB 00:00 (32-33/46): perl-int 51% [========== ] 2.3 MB/s | 9.6 MB 00:03 ETA (32/46): perl-Pod-Usage-1.69-408.fc27.0.riscv64 849 kB/s | 89 kB 00:00 (33-34/46): perl-lib 53% [==========- ] 2.3 MB/s | 9.9 MB 00:03 ETA (33/46): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 890 kB/s | 139 kB 00:00 (34-35/46): perl-lib 55% [=========== ] 2.3 MB/s | 10 MB 00:03 ETA (34/46): perl-podlators-4.09-408.fc27.0.riscv64 899 kB/s | 157 kB 00:00 (35-36/46): perl-lib 58% [===========- ] 2.3 MB/s | 11 MB 00:03 ETA (35/46): perl-File-Temp-0.230.400-408.fc27.0.ri 822 kB/s | 103 kB 00:00 (36-37/46): perl-lib 59% [===========- ] 2.3 MB/s | 11 MB 00:03 ETA (36/46): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 784 kB/s | 97 kB 00:00 (37-38/46): perl-lib 61% [============ ] 2.3 MB/s | 11 MB 00:03 ETA (37/46): perl-Pod-Simple-3.35-408.fc27.0.riscv6 923 kB/s | 271 kB 00:00 (38-39/46): perl-int 65% [============= ] 2.3 MB/s | 12 MB 00:02 ETA (38-40/46): perl-Enc 70% [============== ] 2.3 MB/s | 13 MB 00:02 ETA (38/46): perl-libs-5.26.1-408.fc28.1.riscv64.ri 725 kB/s | 3.3 MB 00:04 (39-40/46): perl-Enc 72% [============== ] 2.2 MB/s | 13 MB 00:02 ETA (39/46): perl-Time-Local-1.250-394.fc27.noarch. 722 kB/s | 30 kB 00:00 (40-41/46): perl-Enc 72% [==============- ] 2.1 MB/s | 13 MB 00:02 ETA (40/46): perl-MIME-Base64-3.15-408.fc27.0.riscv 926 kB/s | 111 kB 00:00 (41-42/46): perl-int 74% [==============- ] 2.2 MB/s | 14 MB 00:02 ETA (41/46): perl-Storable-2.62-408.fc27.0.riscv64. 935 kB/s | 205 kB 00:00 (42-43/46): perl-int 78% [===============- ] 2.2 MB/s | 14 MB 00:01 ETA (42/46): perl-Term-ANSIColor-4.06-408.fc27.0.ri 883 kB/s | 94 kB 00:00 (43-44/46): perl-int 79% [===============- ] 2.2 MB/s | 15 MB 00:01 ETA (43/46): perl-Term-Cap-1.17-408.fc27.0.riscv64. 863 kB/s | 78 kB 00:00 (44-45/46): perl-int 80% [================ ] 2.2 MB/s | 15 MB 00:01 ETA (44/46): perl-Pod-Escapes-1.07-408.fc27.0.riscv 863 kB/s | 77 kB 00:00 (45-46/46): perl-int 82% [================ ] 2.2 MB/s | 15 MB 00:01 ETA (45/46): perl-Encode-2.94-16.fc27.riscv64.rpm 725 kB/s | 1.4 MB 00:02 (46/46): perl-interp 86% [================= ] 2.1 MB/s | 16 MB 00:01 ETA (46/46): perl-interp 91% [================== ] 2.2 MB/s | 17 MB 00:00 ETA (46/46): perl-interp 96% [=================== ] 2.2 MB/s | 18 MB 00:00 ETA (46/46): perl-interpreter-5.26.1-408.fc28.1.ris 932 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 18 MB 00:10 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/46 Installing : perl-Exporter-5.72-408.f [===== ] 1/46 Installing : perl-Exporter-5.72-408.f [======= ] 1/46 Installing : perl-Exporter-5.72-408.f [==================== ] 1/46 Installing : perl-Exporter-5.72-408.f [======================== ] 1/46 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/46 Installing : perl-libs-4:5.26.1-408.f [ ] 2/46 Installing : perl-libs-4:5.26.1-408.f [= ] 2/46 Installing : perl-libs-4:5.26.1-408.f [== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/46 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/46 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/46 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/46 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/46 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/46 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/46 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/46 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/46 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/46 Installing : perl-Carp-1.42-408.fc27. [ ] 3/46 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/46 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/46 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/46 Installing : perl-Scalar-List-Utils-3 [ ] 4/46 Installing : perl-Scalar-List-Utils-3 [= ] 4/46 Installing : perl-Scalar-List-Utils-3 [== ] 4/46 Installing : perl-Scalar-List-Utils-3 [=== ] 4/46 Installing : perl-Scalar-List-Utils-3 [===== ] 4/46 Installing : perl-Scalar-List-Utils-3 [======== ] 4/46 Installing : perl-Scalar-List-Utils-3 [========== ] 4/46 Installing : perl-Scalar-List-Utils-3 [============= ] 4/46 Installing : perl-Scalar-List-Utils-3 [================ ] 4/46 Installing : perl-Scalar-List-Utils-3 [================== ] 4/46 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/46 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/46 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/46 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/46 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/46 Installing : perl-Text-ParseWords-3.3 [ ] 5/46 Installing : perl-Text-ParseWords-3.3 [======= ] 5/46 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/46 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/46 Installing : perl-Term-ANSIColor-4.06 [ ] 6/46 Installing : perl-Term-ANSIColor-4.06 [==== ] 6/46 Installing : perl-Term-ANSIColor-4.06 [================== ] 6/46 Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/46 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/46 Installing : perl-macros-4:5.26.1-408 [ ] 7/46 Installing : perl-macros-4:5.26.1-408 [======================== ] 7/46 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/46 Installing : perl-constant-1.33-408.f [ ] 8/46 Installing : perl-constant-1.33-408.f [======= ] 8/46 Installing : perl-constant-1.33-408.f [======================== ] 8/46 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 8/46 Installing : perl-Errno-1.28-408.fc28 [ ] 9/46 Installing : perl-Errno-1.28-408.fc28 [================= ] 9/46 Installing : perl-Errno-1.28-408.fc28 [======================== ] 9/46 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 9/46 Installing : perl-File-Path-2.15-1.fc [ ] 10/46 Installing : perl-File-Path-2.15-1.fc [==== ] 10/46 Installing : perl-File-Path-2.15-1.fc [======== ] 10/46 Installing : perl-File-Path-2.15-1.fc [==================== ] 10/46 Installing : perl-File-Path-2.15-1.fc [======================== ] 10/46 Installing : perl-File-Path-2.15-1.fc27.noarch 10/46 Installing : perl-PathTools-3.67-408. [ ] 11/46 Installing : perl-PathTools-3.67-408. [== ] 11/46 Installing : perl-PathTools-3.67-408. [=== ] 11/46 Installing : perl-PathTools-3.67-408. [==== ] 11/46 Installing : perl-PathTools-3.67-408. [======= ] 11/46 Installing : perl-PathTools-3.67-408. [========= ] 11/46 Installing : perl-PathTools-3.67-408. [=========== ] 11/46 Installing : perl-PathTools-3.67-408. [============== ] 11/46 Installing : perl-PathTools-3.67-408. [================== ] 11/46 Installing : perl-PathTools-3.67-408. [==================== ] 11/46 Installing : perl-PathTools-3.67-408. [===================== ] 11/46 Installing : perl-PathTools-3.67-408. [====================== ] 11/46 Installing : perl-PathTools-3.67-408. [======================= ] 11/46 Installing : perl-PathTools-3.67-408. [======================== ] 11/46 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 11/46 Installing : perl-threads-shared-1.58 [ ] 12/46 Installing : perl-threads-shared-1.58 [=== ] 12/46 Installing : perl-threads-shared-1.58 [======= ] 12/46 Installing : perl-threads-shared-1.58 [========== ] 12/46 Installing : perl-threads-shared-1.58 [============== ] 12/46 Installing : perl-threads-shared-1.58 [================= ] 12/46 Installing : perl-threads-shared-1.58 [==================== ] 12/46 Installing : perl-threads-shared-1.58 [======================= ] 12/46 Installing : perl-threads-shared-1.58 [======================== ] 12/46 Installing : perl-threads-shared-1.58-1.fc27.riscv64 12/46 Installing : perl-threads-1:2.21-1.fc [ ] 13/46 Installing : perl-threads-1:2.21-1.fc [=== ] 13/46 Installing : perl-threads-1:2.21-1.fc [====== ] 13/46 Installing : perl-threads-1:2.21-1.fc [========= ] 13/46 Installing : perl-threads-1:2.21-1.fc [============= ] 13/46 Installing : perl-threads-1:2.21-1.fc [================ ] 13/46 Installing : perl-threads-1:2.21-1.fc [================== ] 13/46 Installing : perl-threads-1:2.21-1.fc [===================== ] 13/46 Installing : perl-threads-1:2.21-1.fc [====================== ] 13/46 Installing : perl-threads-1:2.21-1.fc [======================= ] 13/46 Installing : perl-threads-1:2.21-1.fc [======================== ] 13/46 Installing : perl-threads-1:2.21-1.fc27.riscv64 13/46 Installing : perl-Text-Tabs+Wrap-2013 [ ] 14/46 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 14/46 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 14/46 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 14/46 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 14/46 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 14/46 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 14/46 Installing : perl-parent-1:0.236-408. [ ] 15/46 Installing : perl-parent-1:0.236-408. [============ ] 15/46 Installing : perl-parent-1:0.236-408. [======================== ] 15/46 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 15/46 Installing : perl-Unicode-Normalize-1 [ ] 16/46 Installing : perl-Unicode-Normalize-1 [= ] 16/46 Installing : perl-Unicode-Normalize-1 [== ] 16/46 Installing : perl-Unicode-Normalize-1 [=== ] 16/46 Installing : perl-Unicode-Normalize-1 [==== ] 16/46 Installing : perl-Unicode-Normalize-1 [===== ] 16/46 Installing : perl-Unicode-Normalize-1 [====== ] 16/46 Installing : perl-Unicode-Normalize-1 [======= ] 16/46 Installing : perl-Unicode-Normalize-1 [======== ] 16/46 Installing : perl-Unicode-Normalize-1 [========= ] 16/46 Installing : perl-Unicode-Normalize-1 [========== ] 16/46 Installing : perl-Unicode-Normalize-1 [============ ] 16/46 Installing : perl-Unicode-Normalize-1 [============= ] 16/46 Installing : perl-Unicode-Normalize-1 [============== ] 16/46 Installing : perl-Unicode-Normalize-1 [=============== ] 16/46 Installing : perl-Unicode-Normalize-1 [================ ] 16/46 Installing : perl-Unicode-Normalize-1 [================= ] 16/46 Installing : perl-Unicode-Normalize-1 [================== ] 16/46 Installing : perl-Unicode-Normalize-1 [=================== ] 16/46 Installing : perl-Unicode-Normalize-1 [==================== ] 16/46 Installing : perl-Unicode-Normalize-1 [===================== ] 16/46 Installing : perl-Unicode-Normalize-1 [====================== ] 16/46 Installing : perl-Unicode-Normalize-1 [======================= ] 16/46 Installing : perl-Unicode-Normalize-1 [======================== ] 16/46 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 16/46 Installing : perl-interpreter-4:5.26. [ ] 17/46 Installing : perl-interpreter-4:5.26. [= ] 17/46 Installing : perl-interpreter-4:5.26. [== ] 17/46 Installing : perl-interpreter-4:5.26. [=== ] 17/46 Installing : perl-interpreter-4:5.26. [==== ] 17/46 Installing : perl-interpreter-4:5.26. [===== ] 17/46 Installing : perl-interpreter-4:5.26. [====== ] 17/46 Installing : perl-interpreter-4:5.26. [======= ] 17/46 Installing : perl-interpreter-4:5.26. [======== ] 17/46 Installing : perl-interpreter-4:5.26. [========= ] 17/46 Installing : perl-interpreter-4:5.26. [========== ] 17/46random: crng init done Installing : perl-interpreter-4:5.26. [=========== ] 17/46 Installing : perl-interpreter-4:5.26. [============ ] 17/46 Installing : perl-interpreter-4:5.26. [============= ] 17/46 Installing : perl-interpreter-4:5.26. [============== ] 17/46 Installing : perl-interpreter-4:5.26. [=============== ] 17/46 Installing : perl-interpreter-4:5.26. [================ ] 17/46 Installing : perl-interpreter-4:5.26. [================= ] 17/46 Installing : perl-interpreter-4:5.26. [================== ] 17/46 Installing : perl-interpreter-4:5.26. [=================== ] 17/46 Installing : perl-interpreter-4:5.26. [==================== ] 17/46 Installing : perl-interpreter-4:5.26. [===================== ] 17/46 Installing : perl-interpreter-4:5.26. [====================== ] 17/46 Installing : perl-interpreter-4:5.26. [======================= ] 17/46 Installing : perl-interpreter-4:5.26. [======================== ] 17/46 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/46 Installing : perl-Socket-4:2.027-1.fc [ ] 18/46 Installing : perl-Socket-4:2.027-1.fc [=== ] 18/46 Installing : perl-Socket-4:2.027-1.fc [======= ] 18/46 Installing : perl-Socket-4:2.027-1.fc [========== ] 18/46 Installing : perl-Socket-4:2.027-1.fc [============== ] 18/46 Installing : perl-Socket-4:2.027-1.fc [================= ] 18/46 Installing : perl-Socket-4:2.027-1.fc [==================== ] 18/46 Installing : perl-Socket-4:2.027-1.fc [===================== ] 18/46 Installing : perl-Socket-4:2.027-1.fc [====================== ] 18/46 Installing : perl-Socket-4:2.027-1.fc [======================= ] 18/46 Installing : perl-Socket-4:2.027-1.fc [======================== ] 18/46 Installing : perl-Socket-4:2.027-1.fc27.riscv64 18/46 Installing : perl-IO-1.38-408.fc28.1. [ ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [= ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [=== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [==== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [===== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [====== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [======= ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [======== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [============== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [================= ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 19/46 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 19/46 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/46 Installing : perl-File-Temp-0.230.400 [ ] 20/46 Installing : perl-File-Temp-0.230.400 [=== ] 20/46 Installing : perl-File-Temp-0.230.400 [============ ] 20/46 Installing : perl-File-Temp-0.230.400 [===================== ] 20/46 Installing : perl-File-Temp-0.230.400 [======================== ] 20/46 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 20/46 Installing : perl-Storable-1:2.62-408 [ ] 21/46 Installing : perl-Storable-1:2.62-408 [== ] 21/46 Installing : perl-Storable-1:2.62-408 [==== ] 21/46 Installing : perl-Storable-1:2.62-408 [====== ] 21/46 Installing : perl-Storable-1:2.62-408 [======== ] 21/46 Installing : perl-Storable-1:2.62-408 [========== ] 21/46 Installing : perl-Storable-1:2.62-408 [============ ] 21/46 Installing : perl-Storable-1:2.62-408 [============== ] 21/46 Installing : perl-Storable-1:2.62-408 [================ ] 21/46 Installing : perl-Storable-1:2.62-408 [================== ] 21/46 Installing : perl-Storable-1:2.62-408 [==================== ] 21/46 Installing : perl-Storable-1:2.62-408 [====================== ] 21/46 Installing : perl-Storable-1:2.62-408 [======================== ] 21/46 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 21/46 Installing : perl-MIME-Base64-3.15-40 [ ] 22/46 Installing : perl-MIME-Base64-3.15-40 [= ] 22/46 Installing : perl-MIME-Base64-3.15-40 [== ] 22/46 Installing : perl-MIME-Base64-3.15-40 [========== ] 22/46 Installing : perl-MIME-Base64-3.15-40 [================== ] 22/46 Installing : perl-MIME-Base64-3.15-40 [======================= ] 22/46 Installing : perl-MIME-Base64-3.15-40 [======================== ] 22/46 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 22/46 Installing : perl-Term-Cap-1.17-408.f [ ] 23/46 Installing : perl-Term-Cap-1.17-408.f [==== ] 23/46 Installing : perl-Term-Cap-1.17-408.f [======================== ] 23/46 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 23/46 Installing : perl-Pod-Escapes-1:1.07- [ ] 24/46 Installing : perl-Pod-Escapes-1:1.07- [==== ] 24/46 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 24/46 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 24/46 Installing : perl-Time-Local-1:1.250- [ ] 25/46 Installing : perl-Time-Local-1:1.250- [= ] 25/46 Installing : perl-Time-Local-1:1.250- [===== ] 25/46 Installing : perl-Time-Local-1:1.250- [======== ] 25/46 Installing : perl-Time-Local-1:1.250- [========= ] 25/46 Installing : perl-Time-Local-1:1.250- [================= ] 25/46 Installing : perl-Time-Local-1:1.250- [=================== ] 25/46 Installing : perl-Time-Local-1:1.250- [======================== ] 25/46 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 25/46 Installing : perl-HTTP-Tiny-0.070-408 [ ] 26/46 Installing : perl-HTTP-Tiny-0.070-408 [== ] 26/46 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 26/46 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 26/46 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 26/46 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 26/46 Installing : perl-Pod-Simple-1:3.35-4 [ ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [= ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 27/46 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 27/46 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 27/46 Installing : perl-Encode-4:2.94-16.fc [ ] 28/46 Installing : perl-Encode-4:2.94-16.fc [= ] 28/46 Installing : perl-Encode-4:2.94-16.fc [== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [=== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [==== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [===== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [====== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [======= ] 28/46 Installing : perl-Encode-4:2.94-16.fc [======== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [========= ] 28/46 Installing : perl-Encode-4:2.94-16.fc [========== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [=========== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [============ ] 28/46 Installing : perl-Encode-4:2.94-16.fc [============= ] 28/46 Installing : perl-Encode-4:2.94-16.fc [============== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [=============== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [================ ] 28/46 Installing : perl-Encode-4:2.94-16.fc [================= ] 28/46 Installing : perl-Encode-4:2.94-16.fc [================== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [=================== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [==================== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [===================== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [====================== ] 28/46 Installing : perl-Encode-4:2.94-16.fc [======================= ] 28/46 Installing : perl-Encode-4:2.94-16.fc [======================== ] 28/46 Installing : perl-Encode-4:2.94-16.fc27.riscv64 28/46 Installing : perl-Getopt-Long-1:2.50- [ ] 29/46 Installing : perl-Getopt-Long-1:2.50- [=== ] 29/46 Installing : perl-Getopt-Long-1:2.50- [==== ] 29/46 Installing : perl-Getopt-Long-1:2.50- [===== ] 29/46 Installing : perl-Getopt-Long-1:2.50- [====== ] 29/46 Installing : perl-Getopt-Long-1:2.50- [======= ] 29/46 Installing : perl-Getopt-Long-1:2.50- [========= ] 29/46 Installing : perl-Getopt-Long-1:2.50- [=============== ] 29/46 Installing : perl-Getopt-Long-1:2.50- [===================== ] 29/46 Installing : perl-Getopt-Long-1:2.50- [======================== ] 29/46 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 29/46 Installing : perl-Pod-Usage-4:1.69-40 [ ] 30/46 Installing : perl-Pod-Usage-4:1.69-40 [== ] 30/46 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 30/46 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 30/46 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 30/46 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 30/46 Installing : perl-podlators-4.09-408. [ ] 31/46 Installing : perl-podlators-4.09-408. [= ] 31/46 Installing : perl-podlators-4.09-408. [== ] 31/46 Installing : perl-podlators-4.09-408. [=== ] 31/46 Installing : perl-podlators-4.09-408. [==== ] 31/46 Installing : perl-podlators-4.09-408. [===== ] 31/46 Installing : perl-podlators-4.09-408. [====== ] 31/46 Installing : perl-podlators-4.09-408. [======= ] 31/46 Installing : perl-podlators-4.09-408. [=========== ] 31/46 Installing : perl-podlators-4.09-408. [=============== ] 31/46 Installing : perl-podlators-4.09-408. [================ ] 31/46 Installing : perl-podlators-4.09-408. [================= ] 31/46 Installing : perl-podlators-4.09-408. [===================== ] 31/46 Installing : perl-podlators-4.09-408. [====================== ] 31/46 Installing : perl-podlators-4.09-408. [======================= ] 31/46 Installing : perl-podlators-4.09-408. [======================== ] 31/46 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 31/46 Installing : perl-Pod-Perldoc-3.28-40 [ ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [= ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 32/46 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 32/46 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 32/46 Installing : perl-Thread-Queue-3.12-4 [ ] 33/46 Installing : perl-Thread-Queue-3.12-4 [===== ] 33/46 Installing : perl-Thread-Queue-3.12-4 [====== ] 33/46 Installing : perl-Thread-Queue-3.12-4 [======================== ] 33/46 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 33/46 Installing : perl-Data-Dumper-2.167-4 [ ] 34/46 Installing : perl-Data-Dumper-2.167-4 [=== ] 34/46 Installing : perl-Data-Dumper-2.167-4 [==== ] 34/46 Installing : perl-Data-Dumper-2.167-4 [======== ] 34/46 Installing : perl-Data-Dumper-2.167-4 [============ ] 34/46 Installing : perl-Data-Dumper-2.167-4 [=============== ] 34/46 Installing : perl-Data-Dumper-2.167-4 [=================== ] 34/46 Installing : perl-Data-Dumper-2.167-4 [====================== ] 34/46 Installing : perl-Data-Dumper-2.167-4 [======================= ] 34/46 Installing : perl-Data-Dumper-2.167-4 [======================== ] 34/46 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 34/46 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 35/46 Installing : m4-1.4.18-5.fc28.riscv64 35/46 Running scriptlet: m4-1.4.18-5.fc28.riscv64 35/46 Installing : emacs-filesystem-1:25.3- [ ] 36/46 Installing : emacs-filesystem-1:25.3- [===== ] 36/46 Installing : emacs-filesystem-1:25.3- [============ ] 36/46 Installing : emacs-filesystem-1:25.3- [=================== ] 36/46 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 36/46 Installing : autoconf-2.69-26.fc28.no [ ] 37/46 Installing : autoconf-2.69-26.fc28.no [= ] 37/46 Installing : autoconf-2.69-26.fc28.no [== ] 37/46 Installing : autoconf-2.69-26.fc28.no [=== ] 37/46 Installing : autoconf-2.69-26.fc28.no [==== ] 37/46 Installing : autoconf-2.69-26.fc28.no [===== ] 37/46 Installing : autoconf-2.69-26.fc28.no [====== ] 37/46 Installing : autoconf-2.69-26.fc28.no [======= ] 37/46 Installing : autoconf-2.69-26.fc28.no [======== ] 37/46 Installing : autoconf-2.69-26.fc28.no [========= ] 37/46 Installing : autoconf-2.69-26.fc28.no [========== ] 37/46 Installing : autoconf-2.69-26.fc28.no [=========== ] 37/46 Installing : autoconf-2.69-26.fc28.no [============ ] 37/46 Installing : autoconf-2.69-26.fc28.no [============= ] 37/46 Installing : autoconf-2.69-26.fc28.no [============== ] 37/46 Installing : autoconf-2.69-26.fc28.no [=============== ] 37/46 Installing : autoconf-2.69-26.fc28.no [================ ] 37/46 Installing : autoconf-2.69-26.fc28.no [================= ] 37/46 Installing : autoconf-2.69-26.fc28.no [================== ] 37/46 Installing : autoconf-2.69-26.fc28.no [=================== ] 37/46 Installing : autoconf-2.69-26.fc28.no [==================== ] 37/46 Installing : autoconf-2.69-26.fc28.no [===================== ] 37/46 Installing : autoconf-2.69-26.fc28.no [====================== ] 37/46 Installing : autoconf-2.69-26.fc28.no [======================= ] 37/46 Installing : autoconf-2.69-26.fc28.no [======================== ] 37/46 Installing : autoconf-2.69-26.fc28.noarch 37/46 Running scriptlet: autoconf-2.69-26.fc28.noarch 37/46 Installing : automake-1.15.1-3.fc28.n [ ] 38/46 Installing : automake-1.15.1-3.fc28.n [= ] 38/46 Installing : automake-1.15.1-3.fc28.n [== ] 38/46 Installing : automake-1.15.1-3.fc28.n [=== ] 38/46 Installing : automake-1.15.1-3.fc28.n [==== ] 38/46 Installing : automake-1.15.1-3.fc28.n [===== ] 38/46 Installing : automake-1.15.1-3.fc28.n [====== ] 38/46 Installing : automake-1.15.1-3.fc28.n [======= ] 38/46 Installing : automake-1.15.1-3.fc28.n [======== ] 38/46 Installing : automake-1.15.1-3.fc28.n [========= ] 38/46 Installing : automake-1.15.1-3.fc28.n [========== ] 38/46 Installing : automake-1.15.1-3.fc28.n [=========== ] 38/46 Installing : automake-1.15.1-3.fc28.n [============ ] 38/46 Installing : automake-1.15.1-3.fc28.n [============= ] 38/46 Installing : automake-1.15.1-3.fc28.n [============== ] 38/46 Installing : automake-1.15.1-3.fc28.n [=============== ] 38/46 Installing : automake-1.15.1-3.fc28.n [================ ] 38/46 Installing : automake-1.15.1-3.fc28.n [================= ] 38/46 Installing : automake-1.15.1-3.fc28.n [================== ] 38/46 Installing : automake-1.15.1-3.fc28.n [=================== ] 38/46 Installing : automake-1.15.1-3.fc28.n [==================== ] 38/46 Installing : automake-1.15.1-3.fc28.n [===================== ] 38/46 Installing : automake-1.15.1-3.fc28.n [====================== ] 38/46 Installing : automake-1.15.1-3.fc28.n [======================= ] 38/46 Installing : automake-1.15.1-3.fc28.n [======================== ] 38/46 Installing : automake-1.15.1-3.fc28.noarch 38/46 Running scriptlet: automake-1.15.1-3.fc28.noarch 38/46 Installing : libpkgconf-1.4.1-1.fc27. [ ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 39/46 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 39/46 Installing : libpkgconf-1.4.1-1.fc27.riscv64 39/46 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 39/46 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 40/46 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 40/46 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 40/46 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 40/46 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 40/46 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 40/46 Installing : pkgconf-1.4.1-1.fc27.riscv64 40/46 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 41/46 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 41/46 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 41/46 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 41/46 Installing : pkgconf-pkg-config-1.4.1 [ ] 42/46 Installing : pkgconf-pkg-config-1.4.1 [==== ] 42/46 Installing : pkgconf-pkg-config-1.4.1 [===== ] 42/46 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 42/46 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 42/46 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 42/46 Installing : lua-5.3.4-8.fc28.riscv64 [ ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [= ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [=== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [==== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [===== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [====== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [======= ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [======== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [========= ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [========== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [=========== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [============ ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [============= ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [============== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [=============== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [================ ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [================= ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [================== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [=================== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [==================== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [===================== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [====================== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [======================= ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 [======================== ] 43/46 Installing : lua-5.3.4-8.fc28.riscv64 43/46 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 44/46 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 44/46 Installing : tar-2:1.29-7.fc27.riscv64 44/46 Running scriptlet: tar-2:1.29-7.fc27.riscv64 44/46 Installing : libtool-2.4.6-21.fc27.ri [ ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [= ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [=== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [==== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [===== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [====== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [======= ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [======== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [========= ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [========== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [============ ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [============= ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [============== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [================ ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [================= ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [================== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 45/46 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 45/46 Installing : libtool-2.4.6-21.fc27.riscv64 45/46 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 45/46 Installing : lua-devel-5.3.4-8.fc28.r [ ] 46/46 Installing : lua-devel-5.3.4-8.fc28.r [==== ] 46/46 Installing : lua-devel-5.3.4-8.fc28.r [=========== ] 46/46 Installing : lua-devel-5.3.4-8.fc28.r [====================== ] 46/46 Installing : lua-devel-5.3.4-8.fc28.r [======================= ] 46/46 Installing : lua-devel-5.3.4-8.fc28.r [======================== ] 46/46 Installing : lua-devel-5.3.4-8.fc28.riscv64 46/46 Running scriptlet: lua-devel-5.3.4-8.fc28.riscv64 46/46 Verifying : libtool-2.4.6-21.fc27.riscv64 1/46 Verifying : tar-2:1.29-7.fc27.riscv64 2/46 Verifying : lua-5.3.4-8.fc28.riscv64 3/46 Verifying : lua-devel-5.3.4-8.fc28.riscv64 4/46 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 5/46 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 6/46 Verifying : pkgconf-1.4.1-1.fc27.riscv64 7/46 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 8/46 Verifying : autoconf-2.69-26.fc28.noarch 9/46 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 10/46 Verifying : automake-1.15.1-3.fc28.noarch 11/46 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 12/46 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 13/46 Verifying : perl-File-Path-2.15-1.fc27.noarch 14/46 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 15/46 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 16/46 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 17/46 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 18/46 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 19/46 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 20/46 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 21/46 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 22/46 Verifying : perl-threads-1:2.21-1.fc27.riscv64 23/46 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 24/46 Verifying : m4-1.4.18-5.fc28.riscv64 25/46 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 26/46 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 27/46 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 28/46 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 29/46 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 30/46 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 31/46 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 32/46 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 33/46 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 34/46 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 35/46 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 36/46 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 37/46 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 38/46 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 39/46 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 40/46 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 41/46 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 42/46 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 43/46 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 44/46 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 45/46 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 46/46 Installed: libtool.riscv64 2.4.6-21.fc27 lua.riscv64 5.3.4-8.fc28 lua-devel.riscv64 5.3.4-8.fc28 autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 libpkgconf.riscv64 1.4.1-1.fc27 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 tar.riscv64 2:1.29-7.fc27 Complete! + dnf -y update --best Last metadata expiration check: 0:00:01 ago on Thu Feb 22 01:38:40 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:00:21 ago on Thu Feb 22 01:38:40 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group fedora-release shadow-utils rpm-build redhat-rpm-config coreutils cpio gzip tar diffutils bzip2 which patch unzip xz util-linux gawk sed bash make grep info findutils ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 26 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/26): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/26): redhat-rpm-config-96-1.fc28.0.riscv64.n 814 kB/s | 75 kB 00:00 (2-3/26): make-4.2.1 1% [ ] 1.7 MB/s | 235 kB 00:06 ETA (2/26): nim-srpm-macros-1-1.fc28.noarch.rpm 317 kB/s | 7.6 kB 00:00 (3-4/26): make-4.2.1 2% [ ] 1.6 MB/s | 274 kB 00:06 ETA (3/26): ocaml-srpm-macros-5-2.fc27.noarch.rpm 282 kB/s | 7.8 kB 00:00 (4-5/26): make-4.2.1 2% [- ] 1.6 MB/s | 314 kB 00:06 ETA (4/26): openblas-srpm-macros-2-2.fc27.noarch.rp 282 kB/s | 6.6 kB 00:00 (5-6/26): make-4.2.1 2% [- ] 1.6 MB/s | 353 kB 00:06 ETA (5/26): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 371 kB/s | 9.0 kB 00:00 (6-7/26): make-4.2.1 3% [- ] 1.6 MB/s | 394 kB 00:06 ETA (6/26): rust-srpm-macros-5-1.fc28.noarch.rpm 330 kB/s | 8.0 kB 00:00 (7-8/26): make-4.2.1 3% [- ] 1.6 MB/s | 434 kB 00:06 ETA (7/26): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 915 kB/s | 235 kB 00:00 (8-9/26): diffutils- 9% [=- ] 1.7 MB/s | 1.1 MB 00:06 ETA (8/26): make-4.2.1-6.fc27.riscv64.rpm 598 kB/s | 486 kB 00:00 (9-10/26): diffutils 11% [== ] 1.7 MB/s | 1.4 MB 00:06 ETA (9/26): which-2.21-4.fc28.riscv64.rpm 723 kB/s | 65 kB 00:00 (10-11/26): diffutil 13% [==- ] 1.7 MB/s | 1.6 MB 00:06 ETA (10/26): diffutils-3.6-3.fc28.riscv64.rpm 539 kB/s | 577 kB 00:01 (11-12/26): zstd-1.3 14% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (11/26): patch-2.7.5-6.fc27.riscv64.rpm 661 kB/s | 270 kB 00:00 (12-13/26): zstd-1.3 20% [==== ] 1.7 MB/s | 2.4 MB 00:05 ETA (12/26): unzip-6.0-36.fc28.riscv64.rpm 787 kB/s | 398 kB 00:00 (13-14/26): xz-5.2.3 24% [====- ] 1.7 MB/s | 2.8 MB 00:05 ETA (13/26): xz-5.2.3-5.fc28.riscv64.rpm 661 kB/s | 212 kB 00:00 (14-15/26): bzip2-1. 25% [===== ] 1.7 MB/s | 3.0 MB 00:05 ETA (14/26): bzip2-1.0.6-24.fc28.riscv64.rpm 485 kB/s | 81 kB 00:00 (15-16/26): elfutils 26% [===== ] 1.7 MB/s | 3.1 MB 00:05 ETA (15/26): file-5.32-3.fc28.riscv64.rpm 719 kB/s | 81 kB 00:00 (16-17/26): elfutils 28% [=====- ] 1.7 MB/s | 3.3 MB 00:04 ETA (16-18/26): elfutils 36% [======= ] 1.8 MB/s | 4.2 MB 00:04 ETA (16/26): zstd-1.3.3-1.fc27.riscv64.rpm 656 kB/s | 1.1 MB 00:01 (17-18/26): binutils 38% [=======- ] 1.7 MB/s | 4.4 MB 00:04 ETA (17/26): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 316 kB/s | 7.5 kB 00:00 (18-19/26): elfutils 38% [=======- ] 1.7 MB/s | 4.5 MB 00:04 ETA (18/26): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 340 kB/s | 8.2 kB 00:00 (19-20/26): elfutils 38% [=======- ] 1.7 MB/s | 4.5 MB 00:04 ETA (19/26): gnat-srpm-macros-4-5.fc28.noarch.rpm 365 kB/s | 8.8 kB 00:00 (20-21/26): elfutils 39% [=======- ] 1.7 MB/s | 4.6 MB 00:04 ETA (20/26): go-srpm-macros-2-11.fc28.noarch.rpm 346 kB/s | 8.4 kB 00:00 (21-22/26): elfutils 39% [=======- ] 1.7 MB/s | 4.6 MB 00:04 ETA (21/26): perl-srpm-macros-1-26.fc28.noarch.rpm 389 kB/s | 9.7 kB 00:00 (22-23/26): elfutils 39% [=======- ] 1.7 MB/s | 4.6 MB 00:04 ETA (22/26): python-srpm-macros-3-26.fc28.noarch.rp 359 kB/s | 10 kB 00:00 (23-24/26): elfutils 40% [======== ] 1.7 MB/s | 4.7 MB 00:04 ETA (23/26): dwz-0.12-5.fc28.riscv64.rpm 863 kB/s | 108 kB 00:00 (24-25/26): elfutils 42% [========- ] 1.7 MB/s | 5.0 MB 00:03 ETA (24/26): elfutils-0.170-4.fc28.riscv64.rpm 587 kB/s | 791 kB 00:01 (25-26/26): binutils 45% [========= ] 1.7 MB/s | 5.3 MB 00:03 ETA (25/26): zip-3.0-20.fc28.riscv64.rpm 776 kB/s | 271 kB 00:00 (26/26): binutils-2. 48% [=========- ] 1.7 MB/s | 5.6 MB 00:03 ETA (26/26): binutils-2. 55% [=========== ] 1.8 MB/s | 6.5 MB 00:02 ETA (26/26): binutils-2. 63% [============- ] 1.8 MB/s | 7.4 MB 00:02 ETA (26/26): binutils-2. 70% [============== ] 1.9 MB/s | 8.3 MB 00:01 ETA (26/26): binutils-2. 78% [===============- ] 2.0 MB/s | 9.2 MB 00:01 ETA (26/26): binutils-2. 85% [================= ] 2.0 MB/s | 10 MB 00:00 ETA (26/26): binutils-2. 93% [==================- ] 2.1 MB/s | 11 MB 00:00 ETA (26/26): binutils-2.30-1.fc28.riscv64.rpm 1.7 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.8 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 1/26 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv64 2/26 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 3/26 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 4/26 Installing : python-srpm-macros-3-26. [ ] 5/26 Installing : python-srpm-macros-3-26. [======================= ] 5/26 Installing : python-srpm-macros-3-26.fc28.noarch 5/26 Installing : perl-srpm-macros-1-26.fc [ ] 6/26 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/26 Installing : perl-srpm-macros-1-26.fc28.noarch 6/26 Installing : go-srpm-macros-2-11.fc28 [ ] 7/26 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/26 Installing : go-srpm-macros-2-11.fc28.noarch 7/26 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/26 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/26 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/26 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/26 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/26 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/26 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/26 Installing : binutils-2.30-1.fc28.ris [ ] 11/26 Installing : binutils-2.30-1.fc28.ris [= ] 11/26 Installing : binutils-2.30-1.fc28.ris [== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======== ] 11/26 Installing : binutils-2.30-1.fc28.ris [========= ] 11/26 Installing : binutils-2.30-1.fc28.ris [========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [============ ] 11/26 Installing : binutils-2.30-1.fc28.ris [============= ] 11/26 Installing : binutils-2.30-1.fc28.ris [============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [================ ] 11/26 Installing : binutils-2.30-1.fc28.ris [================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/26 Installing : binutils-2.30-1.fc28.riscv64 11/26 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/26 Installing : elfutils-0.170-4.fc28.ri [ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/26 Installing : elfutils-0.170-4.fc28.riscv64 12/26 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.riscv64 13/26 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 14/26 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv64 15/26 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv64 16/26 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/26 Installing : rust-srpm-macros-5-1.fc28.noarch 17/26 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/26 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/26 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/26 Installing : openblas-srpm-macros-2-2 [ ] 19/26 Installing : openblas-srpm-macros-2-2 [================ ] 19/26 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/26 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/26 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/26 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/26 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/26 Installing : nim-srpm-macros-1-1.fc28.noarch 21/26 Installing : redhat-rpm-config-96-1.f [ ] 22/26 Installing : redhat-rpm-config-96-1.f [== ] 22/26 Installing : redhat-rpm-config-96-1.f [=== ] 22/26 Installing : redhat-rpm-config-96-1.f [========= ] 22/26 Installing : redhat-rpm-config-96-1.f [=========== ] 22/26 Installing : redhat-rpm-config-96-1.f [================= ] 22/26 Installing : redhat-rpm-config-96-1.f [================== ] 22/26 Installing : redhat-rpm-config-96-1.f [=================== ] 22/26 Installing : redhat-rpm-config-96-1.f [===================== ] 22/26 Installing : redhat-rpm-config-96-1.f [====================== ] 22/26 Installing : redhat-rpm-config-96-1.f [======================== ] 22/26 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/26 Installing : diffutils-3.6-3.fc28.ris [ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/26 Installing : diffutils-3.6-3.fc28.riscv64 23/26 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/26 Installing : rpm-build-4.14.1-6.fc28. [ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [========= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 24/26 Installing : which-2.21-4.fc28.riscv6 [ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [===== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=========== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=============== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================= ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [======================== ] 25/26 Installing : which-2.21-4.fc28.riscv64 25/26 Running scriptlet: which-2.21-4.fc28.riscv64 25/26 Installing : make-1:4.2.1-6.fc27.risc [ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 26/26 Installing : make-1:4.2.1-6.fc27.riscv64 26/26 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 26/26 Verifying : diffutils-3.6-3.fc28.riscv64 1/26 Verifying : make-1:4.2.1-6.fc27.riscv64 2/26 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/26 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/26 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/26 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/26 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/26 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/26 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/26 Verifying : zstd-1.3.3-1.fc27.riscv64 10/26 Verifying : which-2.21-4.fc28.riscv64 11/26 Verifying : patch-2.7.5-6.fc27.riscv64 12/26 Verifying : unzip-6.0-36.fc28.riscv64 13/26 Verifying : xz-5.2.3-5.fc28.riscv64 14/26 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/26 Verifying : elfutils-0.170-4.fc28.riscv64 16/26 Verifying : file-5.32-3.fc28.riscv64 17/26 Verifying : binutils-2.30-1.fc28.riscv64 18/26 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 19/26 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 20/26 Verifying : gnat-srpm-macros-4-5.fc28.noarch 21/26 Verifying : go-srpm-macros-2-11.fc28.noarch 22/26 Verifying : perl-srpm-macros-1-26.fc28.noarch 23/26 Verifying : python-srpm-macros-3-26.fc28.noarch 24/26 Verifying : dwz-0.12-5.fc28.riscv64 25/26 Verifying : zip-3.0-20.fc28.riscv64 26/26 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:02:45 ago on Thu Feb 22 01:38:40 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 543 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 628 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-heade 35% [======= ] 763 kB/s | 910 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 813 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 818 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 87% [=================- ] 952 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 956 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 958 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 982 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off