vkCmdDrawMeshTasksIndirect2EXT(3)

C Specification

To record an indirect mesh tasks drawing command, call:

// Provided by VK_KHR_device_address_commands with VK_EXT_mesh_shader
void vkCmdDrawMeshTasksIndirect2EXT(
    VkCommandBuffer                             commandBuffer,
    const VkDrawIndirect2InfoKHR*               pInfo);

Parameters

commandBuffer is the command buffer into which the command is recorded.
pInfo is a pointer to a VkDrawIndirect2InfoKHR structure defining parameters of this command.

Description

vkCmdDrawMeshTasksIndirect2EXT behaves similarly to vkCmdDrawMeshTasksEXT except that the parameters are read by the device from an address range during execution. pInfo->drawCount draws are executed by the command, with parameters taken from pInfo->addressRange starting at addressRange.address and increasing by addressRange.stride bytes for each successive draw. The parameters of each draw are encoded in an array of VkDrawMeshTasksIndirectCommandEXT structures.

Valid Usage

VUID-vkCmdDrawMeshTasksIndirect2EXT-magFilter-04553
If a VkSampler created with magFilter or minFilter equal to VK_FILTER_LINEAR, reductionMode equal to VK_SAMPLER_REDUCTION_MODE_WEIGHTED_AVERAGE, and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-magFilter-09598
If a VkSampler created with magFilter or minFilter equal to VK_FILTER_LINEAR and reductionMode equal to either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_MINMAX_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-mipmapMode-04770
If a VkSampler created with mipmapMode equal to VK_SAMPLER_MIPMAP_MODE_LINEAR, reductionMode equal to VK_SAMPLER_REDUCTION_MODE_WEIGHTED_AVERAGE, and compareEnable equal to VK_FALSE is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-mipmapMode-09599
If a VkSampler created with mipmapMode equal to VK_SAMPLER_MIPMAP_MODE_LINEAR and reductionMode equal to either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_MINMAX_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-unnormalizedCoordinates-09635
If a VkSampler created with unnormalizedCoordinates equal to VK_TRUE is used to sample a VkImageView as a result of this command, then the image view’s levelCount and layerCount must be 1
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08609
If a VkSampler created with unnormalizedCoordinates equal to VK_TRUE is used to sample a VkImageView as a result of this command, then the image view’s viewType must be VK_IMAGE_VIEW_TYPE_1D or VK_IMAGE_VIEW_TYPE_2D
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08610
If a VkSampler created with unnormalizedCoordinates equal to VK_TRUE is used to sample a VkImageView as a result of this command, then the sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08611
If a VkSampler created with unnormalizedCoordinates equal to VK_TRUE is used to sample a VkImageView as a result of this command, then the sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-06479
If a VkImageView is sampled with depth comparison, the image view’s format features must contain VK_FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-02691
If a VkImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07888
If a VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER descriptor is accessed using atomic operations as a result of this command, then the storage texel buffer’s format features must contain VK_FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-02692
If a VkImageView is sampled with VK_FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-02693
If the VK_EXT_filter_cubic extension is not enabled and any VkImageView is sampled with VK_FILTER_CUBIC_EXT as a result of this command, it must not have a VkImageViewType of VK_IMAGE_VIEW_TYPE_3D, VK_IMAGE_VIEW_TYPE_CUBE, or VK_IMAGE_VIEW_TYPE_CUBE_ARRAY
VUID-vkCmdDrawMeshTasksIndirect2EXT-filterCubic-02694
Any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must have a VkImageViewType and format that supports cubic filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by vkGetPhysicalDeviceImageFormatProperties2
VUID-vkCmdDrawMeshTasksIndirect2EXT-filterCubicMinmax-02695
Any VkImageView being sampled with VK_FILTER_CUBIC_EXT with a reduction mode of either VK_SAMPLER_REDUCTION_MODE_MIN or VK_SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a VkImageViewType and format that supports cubic filtering together with minmax filtering, as specified by VkFilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by vkGetPhysicalDeviceImageFormatProperties2
VUID-vkCmdDrawMeshTasksIndirect2EXT-cubicRangeClamp-09212
If the cubicRangeClamp feature is not enabled, then any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must not have a VkSamplerReductionModeCreateInfo::reductionMode equal to VK_SAMPLER_REDUCTION_MODE_WEIGHTED_AVERAGE_RANGECLAMP_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-reductionMode-09213
Any VkImageView being sampled with a VkSamplerReductionModeCreateInfo::reductionMode equal to VK_SAMPLER_REDUCTION_MODE_WEIGHTED_AVERAGE_RANGECLAMP_QCOM as a result of this command must sample with VK_FILTER_CUBIC_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-selectableCubicWeights-09214
If the selectableCubicWeights feature is not enabled, then any VkImageView being sampled with VK_FILTER_CUBIC_EXT as a result of this command must have VkSamplerCubicWeightsCreateInfoQCOM::cubicWeights equal to VK_CUBIC_FILTER_WEIGHTS_CATMULL_ROM_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-02696
Any VkImage created with a VkImageCreateInfo::flags containing VK_IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a VkSamplerAddressMode of VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpTypeImage-07027
For any VkImageView being written as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpTypeImage-07028
For any VkImageView being read as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpTypeImage-07029
For any VkBufferView being written as a storage texel buffer where the image format field of the OpTypeImage is Unknown, the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpTypeImage-07030
Any VkBufferView being read as a storage texel buffer where the image format field of the OpTypeImage is Unknown then the view’s buffer features must contain VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08600
If a a bound shader was created with a pipeline layout and statically uses a set n, a descriptor set must have been bound to n at the same pipeline bind point, with layouts compatible for set n with the layout(s) used to create the shader, as described in [descriptors-compatibility]
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08601
If a a bound shader was created with a pipeline layout or specified push constant ranges and statically uses a push constant value, that value must have been set for the same pipeline bind point, with push constant ranges that are compatible with the push constant range used to create the shader
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10068
For each array of resources that is used by a bound shader, the indices used to access members of the array must be less than the descriptor count for the identified binding in the descriptor sets used by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08114
Descriptors in each bound descriptor set, specified via vkCmdBindDescriptorSets, must be valid if they are accessed as described by descriptor validity by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was not created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageLayout-00344
If an image descriptor is accessed by a shader, the VkImageLayout must match the subresource accessible from the VkImageView as defined by the image layout matching rules
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08115
If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdBindDescriptorSets, the bound VkPipeline must have been created without VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08116
Descriptors in bound descriptor buffers, specified via vkCmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by the VkPipeline bound to the pipeline bind point used by this command and the bound VkPipeline was created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08604
Descriptors in bound descriptor buffers, specified via vkCmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by any VkShaderEXT bound to a stage corresponding to the pipeline bind point used by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08117
If the descriptors used by the VkPipeline bound to the pipeline bind point were specified via vkCmdSetDescriptorBufferOffsetsEXT, the bound VkPipeline must have been created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08119
If a descriptor is dynamically used with a VkPipeline created with VK_PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08605
If a descriptor is dynamically used with a VkShaderEXT created with a VkDescriptorSetLayout that was created with VK_DESCRIPTOR_SET_LAYOUT_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08606
If the shaderObject feature is not enabled, a valid pipeline must be bound to the pipeline bind point used by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08608
If a pipeline is bound to the pipeline bind point used by this command, there must not have been any calls to dynamic state setting commands for any state specified statically in the VkPipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
VUID-vkCmdDrawMeshTasksIndirect2EXT-uniformBuffers-06935
If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2 for uniformBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08612
If the robustBufferAccess feature is not enabled, and any VkShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
VUID-vkCmdDrawMeshTasksIndirect2EXT-storageBuffers-06936
If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a storage buffer, and that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2 for storageBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08613
If the robustBufferAccess feature is not enabled, and any VkShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
VUID-vkCmdDrawMeshTasksIndirect2EXT-commandBuffer-02707
If commandBuffer is an unprotected command buffer and protectedNoFault is not supported, any resource accessed by bound shaders must not be a protected resource
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewType-07752
If a VkImageView is accessed as a result of this command, then the image view’s viewType must match the Dim operand of the OpTypeImage as described in [spirvenv-image-dimensions]
VUID-vkCmdDrawMeshTasksIndirect2EXT-format-07753
If a VkImageView or VkBufferView is accessed as a result of this command, then the numeric type of the view’s format and the Sampled Type operand of the OpTypeImage must match
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageWrite-08795
If a VkImageView created with a format other than VK_FORMAT_A8_UNORM is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the image view’s format
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageWrite-08796
If a VkImageView created with the format VK_FORMAT_A8_UNORM is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have four components
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageWrite-04469
If a VkBufferView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the buffer view’s format
VUID-vkCmdDrawMeshTasksIndirect2EXT-SampledType-04470
If a VkImageView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64
VUID-vkCmdDrawMeshTasksIndirect2EXT-SampledType-04471
If a VkImageView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32
VUID-vkCmdDrawMeshTasksIndirect2EXT-SampledType-04472
If a VkBufferView with a VkFormat that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64
VUID-vkCmdDrawMeshTasksIndirect2EXT-SampledType-04473
If a VkBufferView with a VkFormat that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32
VUID-vkCmdDrawMeshTasksIndirect2EXT-sparseImageInt64Atomics-04474
If the sparseImageInt64Atomics feature is not enabled, VkImage objects created with the VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-sparseImageInt64Atomics-04475
If the sparseImageInt64Atomics feature is not enabled, VkBuffer objects created with the VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageSampleWeightedQCOM-06971
If OpImageSampleWeightedQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_SAMPLED_IMAGE_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageSampleWeightedQCOM-06972
If OpImageSampleWeightedQCOM uses a VkImageView as a sample weight image as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_WEIGHT_IMAGE_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBoxFilterQCOM-06973
If OpImageBoxFilterQCOM is used to sample a VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BOX_FILTER_SAMPLED_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBlockMatchSSDQCOM-06974
If OpImageBlockMatchSSDQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBlockMatchSADQCOM-06975
If OpImageBlockMatchSADQCOM is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBlockMatchSADQCOM-06976
If OpImageBlockMatchSADQCOM or OpImageBlockMatchSSDQCOM is used to read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageSampleWeightedQCOM-06977
If OpImageSampleWeightedQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchWindowSSDQCOM, OpImageBlockMatchWindowSADQCOM, OpImageBlockMatchGatherSSDQCOM, OpImageBlockMatchGatherSADQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageSampleWeightedQCOM-06978
If any command other than OpImageSampleWeightedQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchWindowSSDQCOM, OpImageBlockMatchWindowSADQCOM, OpImageBlockMatchGatherSSDQCOM, OpImageBlockMatchGatherSADQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a VkSampler as a result of this command, then the sampler must not have been created with VK_SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBlockMatchWindow-09215
If a OpImageBlockMatchWindow*QCOM or OpImageBlockMatchGather*QCOM instruction is used to read from an VkImageView as a result of this command, then the image view’s format features must contain VK_FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBlockMatchWindow-09216
If a OpImageBlockMatchWindow*QCOM or OpImageBlockMatchGather*QCOM instruction is used to read from an VkImageView as a result of this command, then the image view’s format must be a single-component format
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpImageBlockMatchWindow-09217
If a OpImageBlockMatchWindow*QCOM or OpImageBlockMatchGather*QCOM read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07288
Any shader invocation executed by this command must terminate
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09600
If a descriptor with type equal to any of VK_DESCRIPTOR_TYPE_SAMPLE_WEIGHT_IMAGE_QCOM, VK_DESCRIPTOR_TYPE_BLOCK_MATCH_IMAGE_QCOM, VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE, VK_DESCRIPTOR_TYPE_STORAGE_IMAGE, or VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT is accessed as a result of this command, all image subresources identified by that descriptor must be in the image layout identified when the descriptor was written
VUID-vkCmdDrawMeshTasksIndirect2EXT-commandBuffer-10746
The VkDeviceMemory object allocated from a VkMemoryHeap with the VK_MEMORY_HEAP_TILE_MEMORY_BIT_QCOM property that is bound to a resource accessed as a result of this command must be the active bound bound tile memory object in commandBuffer
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10678
If this command is recorded inside a tile shading render pass instance, the stages corresponding to the pipeline bind point used by this command must only include VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_FRAGMENT_BIT, and/or VK_SHADER_STAGE_COMPUTE_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10679
If this command is recorded where per-tile execution model is enabled, there must be no access to any image while the image was be transitioned to the VK_IMAGE_LAYOUT_ATTACHMENT_FEEDBACK_LOOP_OPTIMAL_EXT layout
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDescription-09900
If a VK_DESCRIPTOR_TYPE_TENSOR_ARM descriptor is accessed as a result of this command, then the underlying VkTensorARM object must have been created with the VK_TENSOR_USAGE_SHADER_BIT_ARM usage flag set
VUID-vkCmdDrawMeshTasksIndirect2EXT-dimensionCount-09905
If a VK_DESCRIPTOR_TYPE_TENSOR_ARM descriptor is accessed as a result of this command, then the Rank of the OpTypeTensorARM of the tensor resource variable must be equal to the dimensionCount provided via VkTensorCreateInfoARM::pDescription when creating the underlying VkTensorARM object
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpTypeTensorARM-09906
If a VK_DESCRIPTOR_TYPE_TENSOR_ARM descriptor is accessed as a result of this command, then the element type of the OpTypeTensorARM of the tensor resource variable must be compatible with the VkFormat of the VkTensorViewARM used for the access
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11297
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_PUSH_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_SHADER_RECORD_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, and a shader accesses a OpTypeStruct decorated with Block or BufferBlock using that mapping, the calculated offset for the resource heap must be a multiple of bufferDescriptorAlignment
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11298
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_PUSH_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_SHADER_RECORD_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, and a shader accesses an OpTypeImage or OpTypeSampledImage using that mapping, the calculated offset for the resource heap must be a multiple of imageDescriptorAlignment
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11299
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_PUSH_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_SHADER_RECORD_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, and a shader accesses an OpTypeSampler or OpTypeSampledImage using that mapping, the calculated offset for the sampler heap must be a multiple of samplerDescriptorAlignment
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11397
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_PUSH_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_SHADER_RECORD_INDEX_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, and a shader accesses an OpTypeTensorARM using that mapping, the calculated offset for the resource heap must be a multiple of tensorDescriptorAlignment
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11300
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, and a shader accesses a resource using that mapping, the value of the address at the expected location in push data must be a multiple of 4
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11301
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, and a shader accesses a resource using that mapping, the value of the address at the expected location in push data must be a valid VkDeviceAddress backed by physical memory at every offset specified by each mapping
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11302
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, and a shader accesses a resource using that mapping, the value of the address at the expected location in push data must be a valid VkDeviceAddress
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11304
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a resource using that mapping, the value of the address at the expected location in push data must be a multiple of 8
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11305
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a resource using that mapping, the value of the address at the expected location in push data must be a valid VkDeviceAddress backed by physical memory at every offset specified by each mapping
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11306
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a resource using that mapping, the value of the address pointed to by the address in push data must be a valid VkDeviceAddress
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11308
For each descriptor heap that is statically used by a bound shader, either directly or via a descriptor mapping, a valid descriptor heap must be bound
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11309
If a bound shader was created as a VkShaderEXT with the VK_SHADER_CREATE_DESCRIPTOR_HEAP_BIT_EXT flag or as part of a pipeline with the VK_PIPELINE_CREATE_2_DESCRIPTOR_HEAP_BIT_EXT flag, execution of this command must not result in any descriptor read accessing data outside of the user range of the respective heap bound by vkCmdBind*HeapEXT commands
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11372
If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a uniform buffer or uniform texel buffer through a descriptor in the bound resource heap, that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2 for uniformBuffers, the robustBufferAccess2 feature is not enabled, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the descriptor specified via VkDeviceAddressRangeKHR when the descriptor was written
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11373
If any stage of the VkPipeline object bound to the pipeline bind point used by this command accesses a storage buffer or storage texel buffer through a descriptor in the bound resource heap, that stage was created without enabling either VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS or VK_PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2 for storageBuffers, the robustBufferAccess2 feature is not enabled, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the descriptor specified by VkDeviceAddressRangeKHR when the descriptor was written
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11374
If the robustBufferAccess2 feature is not enabled, the robustBufferAccess feature is not enabled, and any VkShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a uniform buffer, uniform texel buffer, storage buffer, or storage texel buffer, that shader must not access values outside of the range of the buffer as specified by VkDeviceAddressRangeKHR when the descriptor was written
VUID-vkCmdDrawMeshTasksIndirect2EXT-pBindInfo-11375
If any bound shader uses an embedded sampler via a descriptor mapping, the value of pBindInfo->reservedRangeSize set for vkCmdBindSamplerHeapEXT must be greater than or equal to minSamplerHeapReservedRangeWithEmbedded
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11376
If a bound shader was created as a VkShaderEXT with the VK_SHADER_CREATE_DESCRIPTOR_HEAP_BIT_EXT flag or as part of a pipeline with the VK_PIPELINE_CREATE_2_DESCRIPTOR_HEAP_BIT_EXT flag, and that shader statically uses a push constant value, that value must have been set by vkCmdPushDataEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11398
If a bound shader was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_DATA_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_DATA_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_RESOURCE_HEAP_DATA_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a resource using that mapping, the access must not be out of bounds
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11437
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a resource using that mapping, the buffer from which the address in push data was queried must have been created with the VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT usage flag set
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11438
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a uniform buffer using that mapping, the address that the uniform buffer is mapped to must have been queried from a buffer created with the VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT usage flag set
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11441
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a uniform buffer using that mapping, the address that the uniform buffer is mapped to must be aligned to minUniformBufferOffsetAlignment
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11439
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a storage buffer using that mapping, the address that the storage buffer is mapped to must have been queried from a buffer created with the VK_BUFFER_USAGE_STORAGE_BUFFER_BIT usage flag set
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11442
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses a storage buffer using that mapping, the address that the storage buffer is mapped to must be aligned to minStorageBufferOffsetAlignment
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11485
If a pipeline is bound to the pipeline bind point used by this command, or shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, and a shader accesses an acceleration structure using that mapping, the address that the acceleration structure is mapped to must be an acceleration structure address retrieved from a VkAccelerationStructureKHR object via vkGetAccelerationStructureDeviceAddressKHR or handle retrieved from a VkAccelerationStructureNV object via vkGetAccelerationStructureHandleNV
VUID-vkCmdDrawMeshTasksIndirect2EXT-index-11450
If a shader uses a sampler descriptor to sample an image as a result of this command, and that sampler descriptor uses a custom border color with an index defined by VkSamplerCustomBorderColorIndexCreateInfoEXT, the value of VkSamplerCustomBorderColorIndexCreateInfoEXT::index must have been registered before this command was recorded, and still be registered during the sampling operation, with an identically defined color
VUID-vkCmdDrawMeshTasksIndirect2EXT-protectedNoFault-11455
If protectedNoFault is not supported, a pipeline is bound to the pipeline bind point used by this command, or a shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_PUSH_ADDRESS_EXT, VK_DESCRIPTOR_MAPPING_SOURCE_SHADER_RECORD_ADDRESS_EXT, or VK_DESCRIPTOR_MAPPING_SOURCE_INDIRECT_ADDRESS_EXT, the address that the resource is mapped to must have been queried from a buffer created without the VK_BUFFER_CREATE_PROTECTED_BIT create flag set
VUID-vkCmdDrawMeshTasksIndirect2EXT-protectedNoFault-11456
If protectedNoFault is not supported, a pipeline is bound to the pipeline bind point used by this command, or a shader is bound to a shader stage used by this command, and it was created with a descriptor mapping using VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_EXT or VK_DESCRIPTOR_MAPPING_SOURCE_HEAP_WITH_INDIRECT_INDEX_ARRAY_EXT, the address of the indirect memory must have been queried from a buffer created without the VK_BUFFER_CREATE_PROTECTED_BIT create flag set
VUID-vkCmdDrawMeshTasksIndirect2EXT-renderPass-02684
The current render pass must be compatible with the renderPass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS
VUID-vkCmdDrawMeshTasksIndirect2EXT-subpass-02685
The subpass index of the current render pass must be equal to the subpass member of the VkGraphicsPipelineCreateInfo structure specified when creating the VkPipeline bound to VK_PIPELINE_BIND_POINT_GRAPHICS
VUID-vkCmdDrawMeshTasksIndirect2EXT-OpTypeImage-07468
If any shader executed by this pipeline accesses an OpTypeImage variable with a Dim operand of SubpassData, it must be decorated with an InputAttachmentIndex that corresponds to a valid input attachment in the current subpass
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07469
Input attachment views accessed in a subpass must be created with the same VkFormat as the corresponding subpass definition, and be created with a VkImageView that is compatible with the attachment referenced by the subpass' pInputAttachments[InputAttachmentIndex] in the bound VkFramebuffer as specified by Fragment Input Attachment Compatibility
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDepthInputAttachmentIndex-09595
Input attachment views accessed in a dynamic render pass with a InputAttachmentIndex referenced by VkRenderingInputAttachmentIndexInfo, or no InputAttachmentIndex if VkRenderingInputAttachmentIndexInfo::pDepthInputAttachmentIndex or VkRenderingInputAttachmentIndexInfo::pStencilInputAttachmentIndex are NULL, must be created with a VkImageView that is compatible with the corresponding color, depth, or stencil attachment in VkRenderingInfo
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDepthInputAttachmentIndex-09596
Input attachment views accessed in a dynamic render pass via a shader object must have an InputAttachmentIndex if both VkRenderingInputAttachmentIndexInfo::pDepthInputAttachmentIndex and VkRenderingInputAttachmentIndexInfo::pStencilInputAttachmentIndex are non-NULL
VUID-vkCmdDrawMeshTasksIndirect2EXT-InputAttachmentIndex-09597
If an input attachment view accessed in a dynamic render pass via a shader object has an InputAttachmentIndex, the InputAttachmentIndex must match an index in VkRenderingInputAttachmentIndexInfo
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-06537
Memory backing image subresources used as attachments in the current render pass must not be written in any way other than as an attachment by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10795
If a color attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, and feedback loop is not enabled for VK_IMAGE_ASPECT_COLOR_BIT on that attachment, it must not be accessed in any way other than as an attachment by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10796
If a depth attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, and feedback loop is not enabled for VK_IMAGE_ASPECT_DEPTH_BIT on that attachment, it must not be accessed in any way other than as an attachment by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10797
If a stencil attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, and feedback loop is not enabled for VK_IMAGE_ASPECT_STENCIL_BIT on that attachment, it must not be accessed in any way other than as an attachment by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-12338
If a color attachment is read in this command in any way other than as an attachment, or has been read by any prior command in this subpass as a non-attachment, and feedback loop is not enabled for VK_IMAGE_ASPECT_COLOR_BIT on that attachment, the color attachment must not be written to by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-12339
If a depth attachment is read in this command in any way other than as an attachment, or has been read by any prior command in this subpass as a non-attachment, and feedback loop is not enabled for VK_IMAGE_ASPECT_DEPTH_BIT on that attachment, the depth attachment must not be written to by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-12340
If a stencil attachment is read in this command in any way other than as an attachment, or has been read by any prior command in this subpass as a non-attachment, and feedback loop is not enabled for VK_IMAGE_ASPECT_STENCIL_BIT on that attachment, the stencil attachment must not be written to by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09003
If an attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, it must not be accessed in any way other than as an attachment, storage image, or sampled image by this command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-06886
If the current render pass instance uses a depth/stencil attachment with a read-only layout for the depth aspect, depth writes must be disabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-06887
If the current render pass instance uses a depth/stencil attachment with a read-only layout for the stencil aspect, both front and back writeMask are not zero, and stencil test is enabled, all stencil ops must be VK_STENCIL_OP_KEEP
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07831
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT dynamic state enabled then vkCmdSetViewport must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07832
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SCISSOR dynamic state enabled then vkCmdSetScissor must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08617
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_LINE_WIDTH dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the effective rasterization input topology is in line topology class, then vkCmdSetLineWidth must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07834
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_BIAS dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of depthBiasEnable is VK_TRUE, then vkCmdSetDepthBias or vkCmdSetDepthBias2EXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07835
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_BLEND_CONSTANTS dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and an active color attachment current value of blendEnable is VK_TRUE with a blend equations where any VkBlendFactor member is VK_BLEND_FACTOR_CONSTANT_COLOR, VK_BLEND_FACTOR_ONE_MINUS_CONSTANT_COLOR, VK_BLEND_FACTOR_CONSTANT_ALPHA, or VK_BLEND_FACTOR_ONE_MINUS_CONSTANT_ALPHA, then vkCmdSetBlendConstants must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07836
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_BOUNDS dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of depthBoundsTestEnable is VK_TRUE, then vkCmdSetDepthBounds must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07837
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_STENCIL_COMPARE_MASK dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of stencilTestEnable is VK_TRUE, then vkCmdSetStencilCompareMask must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07838
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_STENCIL_WRITE_MASK dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of stencilTestEnable is VK_TRUE, then vkCmdSetStencilWriteMask must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07839
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_STENCIL_REFERENCE dynamic state enabled, the current value of and rasterizerDiscardEnable is VK_FALSE, the current value of stencilTestEnable is VK_TRUE, then vkCmdSetStencilReference must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-maxMultiviewInstanceIndex-02688
If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to VkPhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-02689
If the bound graphics pipeline was created with VkPipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to VK_TRUE, then the active depth attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07634
If the VK_EXT_sample_locations extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetSampleLocationsEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-06666
If the VK_EXT_sample_locations extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of sampleLocationsEnable is VK_TRUE, then vkCmdSetSampleLocationsEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07840
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_CULL_MODE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetCullMode must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07841
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_FRONT_FACE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetFrontFace must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07843
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_TEST_ENABLE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, vkCmdSetDepthTestEnable must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07844
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_WRITE_ENABLE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of depthTestEnable is VK_TRUE, then vkCmdSetDepthWriteEnable must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07845
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_COMPARE_OP dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of depthTestEnable is VK_TRUE, then vkCmdSetDepthCompareOp must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07846
If the depthBounds feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetDepthBoundsTestEnable must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07847
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_STENCIL_TEST_ENABLE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetStencilTestEnable must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07848
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_STENCIL_OP dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, the current value of stencilTestEnable is VK_TRUE, then vkCmdSetStencilOp must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-03417
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, and the state is not inherited, then vkCmdSetViewportWithCount must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-scissorCount-03418
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, and the state is not inherited, then vkCmdSetScissorWithCount must have been called and not subsequently invalidated in the current command buffer prior to this drawing
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-03419
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with both the VK_DYNAMIC_STATE_SCISSOR_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic states enabled, and the state is not inherited, then the viewportCount parameter of vkCmdSetViewportWithCount must match the scissorCount parameter of vkCmdSetScissorWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-04137
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportWScalingStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-04138
If the VK_NV_clip_space_w_scaling extension is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, the current value of viewportWScalingEnable is VK_TRUE, then vkCmdSetViewportWScalingNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08636
If the VK_NV_clip_space_w_scaling extension is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, the current value of viewportWScalingEnable is VK_TRUE, then the viewportCount parameter in the last call to vkCmdSetViewportWScalingNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-04139
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportShadingRateImageStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-shadingRateImage-09233
If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_COARSE_SAMPLE_ORDER_NV and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetCoarseSampleOrderNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-shadingRateImage-09234
If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of shadingRateImageEnable is VK_TRUE, then vkCmdSetViewportShadingRatePaletteNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08637
If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of shadingRateImageEnable is VK_TRUE, then the viewportCount parameter in the last call to vkCmdSetViewportShadingRatePaletteNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-VkPipelineVieportCreateInfo-04141
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportSwizzleStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-VkPipelineVieportCreateInfo-04142
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a VkPipelineViewportExclusiveScissorStateCreateInfoNV structure chained from VkPipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with VkPipelineViewportExclusiveScissorStateCreateInfoNV::exclusiveScissorCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07878
If the exclusiveScissor feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_EXCLUSIVE_SCISSOR_ENABLE_NV dynamic state enabled, then vkCmdSetExclusiveScissorEnableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07879
If the exclusiveScissor feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_EXCLUSIVE_SCISSOR_NV dynamic state enabled, and the most recent call to vkCmdSetExclusiveScissorEnableNV in the current command buffer set any element of pExclusiveScissorEnables to VK_TRUE, then vkCmdSetExclusiveScissorNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-04876
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE dynamic state enabled, then vkCmdSetRasterizerDiscardEnable must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-04877
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_BIAS_ENABLE dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetDepthBiasEnable must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-logicOp-04878
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_LOGIC_OP_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of logicOpEnable is VK_TRUE, then vkCmdSetLogicOpEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-primitiveFragmentShadingRateWithMultipleViewports-04552
If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, the bound graphics pipeline was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, and any of the shader stages of the bound graphics pipeline write to the PrimitiveShadingRateKHR built-in, then vkCmdSetViewportWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must be 1
VUID-vkCmdDrawMeshTasksIndirect2EXT-primitiveFragmentShadingRateWithMultipleViewports-08642
If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, and any shader object bound to a graphics stage writes to the PrimitiveShadingRateKHR built-in, then vkCmdSetViewportWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of vkCmdSetViewportWithCount must be 1
VUID-vkCmdDrawMeshTasksIndirect2EXT-blendEnable-04727
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, then for each color attachment, if the corresponding image view’s format features do not contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT, then the corresponding current value of blendEnable must be VK_FALSE
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08644
If a shader object is bound to any graphics stage or a graphics pipeline is bound, the current value of rasterizerDiscardEnable is VK_FALSE, and none of the following is enabled:
- the VK_AMD_mixed_attachment_samples extension
- the VK_NV_framebuffer_mixed_samples extension
- the multisampledRenderToSingleSampled feature
then the current value of rasterizationSamples must be the same as the current color and/or depth/stencil attachments
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08876
If a shader object is bound to any graphics stage, the current render pass instance must have been begun with vkCmdBeginRendering
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06172
If the current render pass instance was begun with vkCmdBeginRendering, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06173
If the current render pass instance was begun with vkCmdBeginRendering, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06174
If the current render pass instance was begun with vkCmdBeginRendering, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL, this command must not write any values to the depth attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06175
If the current render pass instance was begun with vkCmdBeginRendering, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06176
If the current render pass instance was begun with vkCmdBeginRendering, the imageView member of pDepthAttachment is not VK_NULL_HANDLE, and the layout member of pDepthAttachment is VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06177
If the current render pass instance was begun with vkCmdBeginRendering, the imageView member of pStencilAttachment is not VK_NULL_HANDLE, and the layout member of pStencilAttachment is VK_IMAGE_LAYOUT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewMask-06178
If the current render pass instance was begun with vkCmdBeginRendering, the bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::viewMask equal to VkRenderingInfo::viewMask
VUID-vkCmdDrawMeshTasksIndirect2EXT-colorAttachmentCount-06179
If the dynamicRenderingUnusedAttachments feature is not enabled and the current render pass instance was begun with vkCmdBeginRendering, the bound graphics pipeline must have been created with a VkPipelineRenderingCreateInfo::colorAttachmentCount equal to VkRenderingInfo::colorAttachmentCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08910
If the dynamicRenderingUnusedAttachments feature is not enabled, and the current render pass instance was begun with vkCmdBeginRendering and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with an imageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08912
If the dynamicRenderingUnusedAttachments feature is not enabled, and the current render pass instance was begun with vkCmdBeginRendering and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with an imageView equal to VK_NULL_HANDLE must have the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the bound pipeline equal to VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08911
If the dynamicRenderingUnusedAttachments feature is enabled, and the current render pass instance was begun with vkCmdBeginRendering and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with an imageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the bound graphics pipeline, or the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats, if it exists, must be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-colorAttachmentCount-09362
If the current render pass instance was begun with vkCmdBeginRendering, with a VkRenderingInfo::colorAttachmentCount equal to 1, there is no shader object bound to any graphics stage, and a color attachment with a resolve mode of VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID, each element of the VkRenderingInfo::pColorAttachments array with a resolveImageView not equal to VK_NULL_HANDLE must have been created with an image created with a VkExternalFormatANDROID::externalFormat value equal to the VkExternalFormatANDROID::externalFormat value used to create the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09363
If there is no shader object bound to any graphics stage, the current render pass instance was begun with vkCmdBeginRendering and a VkRenderingInfo::colorAttachmentCount equal to 1, and a color attachment with a resolve mode of VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID, each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with an image created with a VkExternalFormatANDROID::externalFormat value equal to the VkExternalFormatANDROID::externalFormat value used to create the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09364
If the current render pass instance was begun with vkCmdBeginRendering, there is no shader object bound to any graphics stage, and the bound graphics pipeline was created with a non-zero VkExternalFormatANDROID::externalFormat value and with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled, then vkCmdSetColorBlendEnableEXT must have set the blend enable to VK_FALSE prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09365
If the current render pass instance was begun with vkCmdBeginRendering, there is no shader object bound to any graphics stage, and the bound graphics pipeline was created with a non-zero VkExternalFormatANDROID::externalFormat value and with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled, then vkCmdSetRasterizationSamplesEXT must have set rasterizationSamples to VK_SAMPLE_COUNT_1_BIT prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09366
If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID resolve mode, then vkCmdSetColorBlendEnableEXT must have set blend enable to VK_FALSE prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizationSamples-09367
If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID resolve mode, then vkCmdSetRasterizationSamplesEXT must have set rasterizationSamples to VK_SAMPLE_COUNT_1_BIT prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09368
If the current render pass instance was begun with vkCmdBeginRendering, there is no shader object bound to any graphics stage, and the bound graphics pipeline was created with a non-zero VkExternalFormatANDROID::externalFormat value and with the VK_DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR dynamic state enabled, then vkCmdSetFragmentShadingRateKHR must have set pFragmentSize->width to 1 prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09369
If the current render pass instance was begun with vkCmdBeginRendering, there is no shader object bound to any graphics stage, and the bound graphics pipeline was created with a non-zero VkExternalFormatANDROID::externalFormat value and with the VK_DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR dynamic state enabled, then vkCmdSetFragmentShadingRateKHR must have set pFragmentSize->height to 1 prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-pFragmentSize-09370
If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID resolve mode, then vkCmdSetFragmentShadingRateKHR must have set pFragmentSize->width to 1 prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-pFragmentSize-09371
If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID resolve mode, then vkCmdSetFragmentShadingRateKHR must have set pFragmentSize->height to 1 prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07749
If the colorWriteEnable feature is enabled, a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetColorWriteEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-attachmentCount-07750
If the colorWriteEnable feature is enabled, a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then the attachmentCount parameter of most recent call to vkCmdSetColorWriteEnableEXT in the current command buffer must be greater than or equal to the number of active color attachments
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07751
If the VK_EXT_discard_rectangles extension is enabled, a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DISCARD_RECTANGLE_EXT dynamic state enabled and the pNext chain of VkGraphicsPipelineCreateInfo included a VkPipelineDiscardRectangleStateCreateInfoEXT structure, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of discardRectangleEnable is VK_TRUE, then vkCmdSetDiscardRectangleEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command for each discard rectangle in VkPipelineDiscardRectangleStateCreateInfoEXT::discardRectangleCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizerDiscardEnable-09236
If the VK_EXT_discard_rectangles extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with VK_DYNAMIC_STATE_DISCARD_RECTANGLE_EXT dynamic state enabled and the pNext chain of VkGraphicsPipelineCreateInfo did not include a VkPipelineDiscardRectangleStateCreateInfoEXT structure, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of discardRectangleEnable is VK_TRUE, then vkCmdSetDiscardRectangleEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command for each discard rectangle in VkPhysicalDeviceDiscardRectanglePropertiesEXT::maxDiscardRectangles
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07880
If the VK_EXT_discard_rectangles extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DISCARD_RECTANGLE_ENABLE_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetDiscardRectangleEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07881
If the VK_EXT_discard_rectangles extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DISCARD_RECTANGLE_MODE_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of discardRectangleEnable is VK_TRUE, then vkCmdSetDiscardRectangleModeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08913
If the current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pDepthAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08914
If current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->imageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08915
If the current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingUnusedAttachments feature is enabled, VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, and the value of VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the bound graphics pipeline was not equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->imageView, the value of the format must be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08916
If the current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pStencilAttachment->imageView was VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08917
If current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->imageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-08918
If the current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingUnusedAttachments feature is enabled, VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, and the value of VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the bound graphics pipeline was not equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->imageView, the value of the format must be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06183
If the current render pass instance was begun with vkCmdBeginRendering and VkRenderingFragmentShadingRateAttachmentInfoKHR::imageView was not VK_NULL_HANDLE, the bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingLocalRead-11797
If the current render pass instance was begun with vkCmdBeginRendering, the dynamicRenderingLocalRead feature is enabled, the VK_RENDERING_LOCAL_READ_CONCURRENT_ACCESS_CONTROL_BIT_KHR flag is specified, and an attachment is being used as a feedback loop as specified by VK_RENDERING_ATTACHMENT_INPUT_ATTACHMENT_FEEDBACK_BIT_KHR, VkRenderingAttachmentFlagsInfoKHR::flags for that attachment must include VK_RENDERING_ATTACHMENT_INPUT_ATTACHMENT_FEEDBACK_BIT_KHR
VUID-vkCmdDrawMeshTasksIndirect2EXT-imageView-06184
If the current render pass instance was begun with vkCmdBeginRendering and VkRenderingFragmentDensityMapAttachmentInfoEXT::imageView was not VK_NULL_HANDLE, the bound graphics pipeline must have been created with VK_PIPELINE_CREATE_RENDERING_FRAGMENT_DENSITY_MAP_ATTACHMENT_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-layers-10831
If the current render pass instance was created with VK_RENDERING_PER_LAYER_FRAGMENT_DENSITY_BIT_VALVE or VK_RENDER_PASS_CREATE_PER_LAYER_FRAGMENT_DENSITY_BIT_VALVE, and the bound graphics pipeline was created with VK_PIPELINE_CREATE_2_PER_LAYER_FRAGMENT_DENSITY_BIT_VALVE, then the current render pass instance must have a layers value less than or equal to VkPipelineFragmentDensityMapLayeredCreateInfoVALVE::maxFragmentDensityMapLayers
VUID-vkCmdDrawMeshTasksIndirect2EXT-colorAttachmentCount-06185
If the bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the current render pass instance was begun with vkCmdBeginRendering with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the corresponding element of the pColorAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDepthAttachment-06186
If the current render pass instance was begun with vkCmdBeginRendering, the bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-pStencilAttachment-06187
If the current render pass instance was begun with vkCmdBeginRendering, the bound pipeline was created with a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of the depthStencilAttachmentSamples member of VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV used to create the bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-multisampledRenderToSingleSampled-07285
If the bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and vkCmdBeginCustomResolveEXT has not yet been recorded in the render pass instance, and the current render pass instance was begun with vkCmdBeginRendering with a VkRenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with a imageView not equal to VK_NULL_HANDLE must have been created with a sample count equal to the value of rasterizationSamples for the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-multisampledRenderToSingleSampled-07286
If the bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and vkCmdBeginCustomResolveEXT has not yet been recorded in the render pass instance, and VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, the value of rasterizationSamples for the bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->imageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-multisampledRenderToSingleSampled-07287
If the bound pipeline was created without a VkAttachmentSampleCountInfoAMD or VkAttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and vkCmdBeginCustomResolveEXT has not yet been recorded in the render pass instance, and VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, the value of rasterizationSamples for the bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->imageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-pNext-07935
If this command is called inside a render pass instance started with vkCmdBeginRendering, and the pNext chain of VkRenderingInfo includes a VkMultisampledRenderToSingleSampledInfoEXT structure with multisampledRenderToSingleSampledEnable equal to VK_TRUE, then the value of rasterizationSamples for the bound graphics pipeline must be equal to VkMultisampledRenderToSingleSampledInfoEXT::rasterizationSamples
VUID-vkCmdDrawMeshTasksIndirect2EXT-renderPass-06198
If the current render pass instance was begun with vkCmdBeginRendering, the bound pipeline must have been created with a VkGraphicsPipelineCreateInfo::renderPass equal to VK_NULL_HANDLE
VUID-vkCmdDrawMeshTasksIndirect2EXT-pColorAttachments-08963
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has not yet been recorded in the render pass instance, there is a graphics pipeline bound with a fragment shader that statically writes to a color attachment, the color write mask is not zero, color writes are enabled, and the corresponding element of the VkRenderingInfo::pColorAttachments->imageView was not VK_NULL_HANDLE, then the corresponding element of VkPipelineRenderingCreateInfo::pColorAttachmentFormats used to create the pipeline must not be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-pColorAttachments-11539
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, there is a graphics pipeline bound with a fragment shader that statically writes to a color attachment, the color write mask is not zero, color writes are enabled, and the corresponding element of the VkRenderingInfo::pColorAttachments->resolveImageView was not VK_NULL_HANDLE, then the corresponding element of VkCustomResolveCreateInfoEXT::pColorAttachmentFormats used to create the pipeline must not be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDepthAttachment-08964
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has not yet been recorded in the render pass instance, there is a graphics pipeline bound, depth test is enabled, and the VkRenderingInfo::pDepthAttachment->imageView was not VK_NULL_HANDLE, then the VkPipelineRenderingCreateInfo::depthAttachmentFormat used to create the pipeline must not be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDepthAttachment-11540
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, there is a graphics pipeline bound, depth test is enabled, and the VkRenderingInfo::pDepthAttachment->resolveImageView was not VK_NULL_HANDLE, then the VkCustomResolveCreateInfoEXT::depthAttachmentFormat used to create the pipeline must not be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-pStencilAttachment-08965
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has not yet been recorded in the render pass instance, there is a graphics pipeline bound, stencil test is enabled and the VkRenderingInfo::pStencilAttachment->imageView was not VK_NULL_HANDLE, then the VkPipelineRenderingCreateInfo::stencilAttachmentFormat used to create the pipeline must not be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-pStencilAttachment-11860
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, there is a graphics pipeline bound, stencil test is enabled and the VkRenderingInfo::pStencilAttachment->resolveImageView was not VK_NULL_HANDLE, then the VkCustomResolveCreateInfoEXT::stencilAttachmentFormat used to create the pipeline must not be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-10582
If the current render pass instance was begun with a vkCmdBeginRendering call in commandBuffer, its VkRenderingInfo::flags parameter must not have VK_RENDERING_CONTENTS_SECONDARY_COMMAND_BUFFERS_BIT set unless VK_RENDERING_CONTENTS_INLINE_BIT_KHR is also set
VUID-vkCmdDrawMeshTasksIndirect2EXT-primitivesGeneratedQueryWithRasterizerDiscard-06708
If the primitivesGeneratedQueryWithRasterizerDiscard feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, rasterization discard must not be enabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-primitivesGeneratedQueryWithNonZeroStreams-06709
If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, the bound graphics pipeline must not have been created with a non-zero value in VkPipelineRasterizationStateStreamCreateInfoEXT::rasterizationStream
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07620
If the depthClamp feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetDepthClampEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07621
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_POLYGON_MODE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetPolygonModeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07622
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetRasterizationSamplesEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07623
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetSampleMaskEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-alphaToCoverageEnable-08919
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled, and alphaToCoverageEnable was VK_TRUE in the last call to vkCmdSetAlphaToCoverageEnableEXT, then the Fragment Output Interface must contain a variable for the alpha Component word in Location 0 at Index 0
VUID-vkCmdDrawMeshTasksIndirect2EXT-alphaToCoverageEnable-08920
If a shader object is bound to any graphics stage, and the most recent call to vkCmdSetAlphaToCoverageEnableEXT in the current command buffer set alphaToCoverageEnable to VK_TRUE, then the Fragment Output Interface must contain a variable for the alpha Component word in Location 0 at Index 0
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07624
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetAlphaToCoverageEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07625
If the alphaToOne feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetAlphaToOneEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07626
If the logicOp feature is enabled, a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetLogicOpEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07627
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and there are color attachments bound, then vkCmdSetColorBlendEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07629
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and there are color attachments bound, then vkCmdSetColorWriteMaskEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07630
If the geometryStreams feature is enabled, and a shader object is bound to the VK_SHADER_STAGE_GEOMETRY_BIT stage or a graphics pipeline is bound which was created with both a VK_SHADER_STAGE_GEOMETRY_BIT stage and the VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT dynamic state enabled, then vkCmdSetRasterizationStreamEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07631
If the VK_EXT_conservative_rasterization extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetConservativeRasterizationModeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07632
If the VK_EXT_conservative_rasterization extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_EXTRA_PRIMITIVE_OVERESTIMATION_SIZE_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of conservativeRasterizationMode is VK_CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT, then vkCmdSetExtraPrimitiveOverestimationSizeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-conservativePointAndLineRasterization-07499
If the VK_EXT_conservative_rasterization extension is enabled, conservativePointAndLineRasterization is not supported, a shader object is bound to any graphics stage or a graphics pipeline is bound, the current value of rasterizerDiscardEnable is VK_FALSE, and the effective rasterization input topology is in line or point topology class, then the current value of conservativeRasterizationMode must be VK_CONSERVATIVE_RASTERIZATION_MODE_DISABLED_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07633
If the depthClipEnable feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT dynamic state, then vkCmdSetDepthClipEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07636
If the VK_EXT_provoking_vertex extension is enabled, a shader object is bound to the VK_SHADER_STAGE_VERTEX_BIT stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetProvokingVertexModeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08666
If any of the stippledRectangularLines, stippledBresenhamLines or stippledSmoothLines features are enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, and the effective rasterization input topology is in line topology class, then vkCmdSetLineRasterizationModeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08669
If any of the stippledRectangularLines, stippledBresenhamLines or stippledSmoothLines features are enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the effective rasterization input topology is in line topology class, then vkCmdSetLineStippleEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07849
If any of the stippledRectangularLines, stippledBresenhamLines or stippledSmoothLines features are enabled and a shader object is bound to any graphics stage, or a bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of stippledLineEnable is VK_TRUE, then vkCmdSetLineStipple must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10608
If a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic state enabled, the effective rasterization input topology is in line topology class, and the current lineRasterizationMode is VK_LINE_RASTERIZATION_MODE_BRESENHAM or VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH, then the current alphaToCoverageEnable, alphaToOneEnable and sampleShadingEnable states must all be VK_FALSE
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07639
If the depthClipControl feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT dynamic state enabled, then vkCmdSetDepthClipNegativeOneToOneEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09650
If the depthClampControl feature is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_DEPTH_CLAMP_RANGE_EXT dynamic state enabled, and the current value of depthClampEnable is VK_TRUE, then vkCmdSetDepthClampRangeEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07640
If the VK_NV_clip_space_w_scaling extension is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV dynamic state enabled, then vkCmdSetViewportWScalingEnableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07641
If the VK_NV_viewport_swizzle extension is enabled, and a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled, then vkCmdSetViewportSwizzleNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07642
If the VK_NV_fragment_coverage_to_color extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetCoverageToColorEnableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07643
If the VK_NV_fragment_coverage_to_color extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of coverageToColorEnable is VK_TRUE, then vkCmdSetCoverageToColorLocationNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07644
If the VK_NV_framebuffer_mixed_samples extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetCoverageModulationModeNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07645
If the VK_NV_framebuffer_mixed_samples extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of coverageModulationMode is any value other than VK_COVERAGE_MODULATION_MODE_NONE_NV, then vkCmdSetCoverageModulationTableEnableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07646
If the VK_NV_framebuffer_mixed_samples extension is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV dynamic state enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and the current value of coverageModulationTableEnable is VK_TRUE, then vkCmdSetCoverageModulationTableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07647
If the shadingRateImage feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetShadingRateImageEnableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-pipelineFragmentShadingRate-09238
If the pipelineFragmentShadingRate feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetFragmentShadingRateKHR must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07648
If the representativeFragmentTest feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetRepresentativeFragmentTestEnableNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07649
If the coverageReductionMode feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetCoverageReductionModeNV must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizationSamples-07471
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current subpass does not use any color and/or depth/stencil attachments, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must follow the rules for a zero-attachment subpass
VUID-vkCmdDrawMeshTasksIndirect2EXT-samples-07472
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the VkPipelineMultisampleStateCreateInfo::rasterizationSamples parameter used to create the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-samples-07473
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_MASK_EXT state and VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, then the samples parameter in the last call to vkCmdSetSampleMaskEXT must be greater or equal to the rasterizationSamples parameter in the last call to vkCmdSetRasterizationSamplesEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09211
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, or a shader object is bound to any graphics stage, and the current render pass instance includes a VkMultisampledRenderToSingleSampledInfoEXT structure with multisampledRenderToSingleSampledEnable equal to VK_TRUE, then the rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT must be the same as the rasterizationSamples member of that structure
VUID-vkCmdDrawMeshTasksIndirect2EXT-firstAttachment-07476
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic states enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then the last call to vkCmdSetColorBlendEnableEXT in the current command buffer prior to this drawing command must have set a value for all active color attachments
VUID-vkCmdDrawMeshTasksIndirect2EXT-firstAttachment-07478
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound was created with the VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic states enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then the last call to vkCmdSetColorWriteMaskEXT in the current command buffer prior to this drawing command must have set a value for all active color attachments
VUID-vkCmdDrawMeshTasksIndirect2EXT-advancedBlendMaxColorAttachments-07480
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound was created with the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT and VK_DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic states enabled, the current value of rasterizerDiscardEnable is VK_FALSE, and an active color attachment current value of blendEnable is VK_TRUE, then the number of active color attachments must not exceed advancedBlendMaxColorAttachments
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10862
If a graphics pipeline is bound was created with VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT , but not the VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetColorBlendEquationEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command for all active color attachments with the blendEnable current value of VK_TRUE
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizerDiscardEnable-10863
If a graphics pipeline is bound was created with VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT, but not the VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetColorBlendAdvancedEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command for all active color attachments with the blendEnable current value of VK_TRUE
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10864
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound was created with VK_DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT and VK_DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then either vkCmdSetColorBlendAdvancedEXT or vkCmdSetColorBlendEquationEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command for all active color attachments with the blendEnable current value of VK_TRUE
VUID-vkCmdDrawMeshTasksIndirect2EXT-primitivesGeneratedQueryWithNonZeroStreams-07481
If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, and the bound graphics pipeline was created with VK_DYNAMIC_STATE_RASTERIZATION_STREAM_EXT state enabled, the last call to vkCmdSetRasterizationStreamEXT must have set the rasterizationStream to zero
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsPerPixel-07482
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, and the current value of sampleLocationsEnable is VK_TRUE, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples member of the VkPipelineMultisampleStateCreateInfo structure the bound graphics pipeline has been created with
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsPerPixel-07483
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current value of sampleLocationsEnable is VK_TRUE, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to vkCmdSetSampleLocationsEXT must equal the rasterizationSamples parameter of the last call to vkCmdSetRasterizationSamplesEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07484
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT then the current active depth attachment must have been created with the VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07485
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.maxSampleLocationGridSize.width in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::maxSampleLocationGridSize.width as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07486
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.maxSampleLocationGridSize.height in the last call to vkCmdSetSampleLocationsEXT must evenly divide VkMultisamplePropertiesEXT::maxSampleLocationGridSize.height as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07487
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was VK_TRUE in the last call to vkCmdSetSampleLocationsEnableEXT, the fragment shader code must not statically use the extended instruction InterpolateAtSample
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07936
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state disabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current value of sampleLocationsEnable is VK_TRUE, then sampleLocationsInfo.sampleLocationGridSize.width must evenly divide VkMultisamplePropertiesEXT::maxSampleLocationGridSize.width as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling the value of rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07937
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state disabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current value of sampleLocationsEnable is VK_TRUE, then sampleLocationsInfo.sampleLocationGridSize.height must evenly divide VkMultisamplePropertiesEXT::maxSampleLocationGridSize.height as returned by vkGetPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling the value of rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-sampleLocationsEnable-07938
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state disabled and the VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current value of sampleLocationsEnable is VK_TRUE, then sampleLocationsInfo.sampleLocationsPerPixel must equal rasterizationSamples in the last call to vkCmdSetRasterizationSamplesEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-coverageModulationTableEnable-07488
If a shader object is bound to any graphics stage or the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV state enabled, and the last call to vkCmdSetCoverageModulationTableEnableNV set coverageModulationTableEnable to VK_TRUE, then the coverageModulationTableCount parameter in the last call to vkCmdSetCoverageModulationTableNV must equal the current rasterizationSamples divided by the number of color samples in the current active color attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizationSamples-07489
If the VK_NV_framebuffer_mixed_samples extension is enabled, and if current subpass has a depth/stencil attachment and depth test, stencil test, or depth bounds test are enabled in the bound pipeline, then the current rasterizationSamples must be the same as the sample count of the depth/stencil attachment
VUID-vkCmdDrawMeshTasksIndirect2EXT-coverageToColorEnable-07490
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV state enabled and the last call to vkCmdSetCoverageToColorEnableNV set the coverageToColorEnable to VK_TRUE, then there must be an active color attachment at the location selected by the last call to vkCmdSetCoverageToColorLocationNV coverageToColorLocation, with a VkFormat of VK_FORMAT_R8_UINT, VK_FORMAT_R8_SINT, VK_FORMAT_R16_UINT, VK_FORMAT_R16_SINT, VK_FORMAT_R32_UINT, or VK_FORMAT_R32_SINT
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizerDiscardEnable-09420
If the VK_NV_fragment_coverage_to_color extension is enabled, and a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to vkCmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to VK_FALSE, and the last call to vkCmdSetCoverageToColorEnableNV set the coverageToColorEnable to VK_TRUE, then there must be an active color attachment at the location selected by the last call to vkCmdSetCoverageToColorLocationNV coverageToColorLocation, with a VkFormat of VK_FORMAT_R8_UINT, VK_FORMAT_R8_SINT, VK_FORMAT_R16_UINT, VK_FORMAT_R16_SINT, VK_FORMAT_R32_UINT, or VK_FORMAT_R32_SINT
VUID-vkCmdDrawMeshTasksIndirect2EXT-coverageReductionMode-07491
If the coverageReductionMode feature is enabled, a shader object is bound to any graphics stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV or VK_DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic states enabled, then the current values of coverageReductionMode, rasterizationSamples, the sample counts for the color and depth/stencil attachments (if the subpass has them) must be a valid combination returned by vkGetPhysicalDeviceSupportedFramebufferMixedSamplesCombinationsNV
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-07492
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled, then the bound graphics pipeline must have been created with VkPipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-07493
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_VIEWPORT_WITH_COUNT and VK_DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic states enabled then the viewportCount parameter in the last call to vkCmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-viewportCount-09421
If the VK_NV_viewport_swizzle extension is enabled, and a shader object is bound to any graphics stage, then the viewportCount parameter in the last call to vkCmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to vkCmdSetViewportWithCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-rasterizationSamples-07494
If the VK_NV_framebuffer_mixed_samples extension is enabled, and the coverageReductionMode feature is not enabled, or the current value of coverageReductionMode is not VK_COVERAGE_REDUCTION_MODE_TRUNCATE_NV, and the current value of rasterizationSamples is greater than sample count of the color attachment, then sample shading must be disabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-stippledLineEnable-07495
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR, then the stippledRectangularLines feature must be enabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-stippledLineEnable-07496
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_BRESENHAM, then the stippledBresenhamLines feature must be enabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-stippledLineEnable-07497
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH, then the stippledSmoothLines feature must be enabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-stippledLineEnable-07498
If the bound graphics pipeline state was created with the VK_DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or VK_DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is VK_TRUE and the current lineRasterizationMode state is VK_LINE_RASTERIZATION_MODE_DEFAULT, then the stippledRectangularLines feature must be enabled and VkPhysicalDeviceLimits::strictLines must be VK_TRUE
VUID-vkCmdDrawMeshTasksIndirect2EXT-stage-07073
If the bound pipeline was created with the VkPipelineShaderStageCreateInfo::stage member of an element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT, then Mesh Shader Queries must not be active
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08877
If a shader object is bound to the VK_SHADER_STAGE_FRAGMENT_BIT stage or a graphics pipeline is bound which was created with the VK_DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT dynamic state enabled, and the current value of rasterizerDiscardEnable is VK_FALSE, then vkCmdSetAttachmentFeedbackLoopEnableEXT must have been called and not subsequently invalidated in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07850
If dynamic state was inherited from VkCommandBufferInheritanceViewportScissorInfoNV, it must be set in the current command buffer prior to this drawing command
VUID-vkCmdDrawMeshTasksIndirect2EXT-nextStage-10745
For each shader object bound to a graphics stage, except for shader object bound to the last graphics stage in the logical pipeline, it must have been created with a nextStage including the corresponding bit to the shader object bound to the following graphics stage in the logical pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08684
If there is no bound graphics pipeline, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_VERTEX_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08685
If there is no bound graphics pipeline, and the tessellationShader feature is enabled, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08686
If there is no bound graphics pipeline, and the tessellationShader feature is enabled, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08687
If there is no bound graphics pipeline, and the geometryShader feature is enabled, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_GEOMETRY_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08688
If there is no bound graphics pipeline, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_FRAGMENT_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08689
If there is no bound graphics pipeline, and the taskShader feature is enabled, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_TASK_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08690
If there is no bound graphics pipeline, and the meshShader feature is enabled, vkCmdBindShadersEXT must have been called in the current command buffer with pStages with an element of VK_SHADER_STAGE_MESH_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08693
If there is no bound graphics pipeline, and at least one of the taskShader and meshShader features is enabled, one of the VK_SHADER_STAGE_VERTEX_BIT or VK_SHADER_STAGE_MESH_BIT_EXT stages must have a valid VkShaderEXT bound, and the other must have no VkShaderEXT bound
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08696
If there is no bound graphics pipeline, and a valid VkShaderEXT is bound to the VK_SHADER_STAGE_VERTEX_BIT stage, there must be no VkShaderEXT bound to either the VK_SHADER_STAGE_TASK_BIT_EXT stage or the VK_SHADER_STAGE_MESH_BIT_EXT stage
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08698
If any graphics shader is bound which was created with the VK_SHADER_CREATE_LINK_STAGE_BIT_EXT flag, then all shaders created with the VK_SHADER_CREATE_LINK_STAGE_BIT_EXT flag in the same vkCreateShadersEXT call must also be bound
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08699
If any graphics shader is bound which was created with the VK_SHADER_CREATE_LINK_STAGE_BIT_EXT flag, any stages in between stages whose shaders which did not create a shader with the VK_SHADER_CREATE_LINK_STAGE_BIT_EXT flag as part of the same vkCreateShadersEXT call must not have any VkShaderEXT bound
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08878
All bound graphics shader objects must have been created with identical or identically defined push constant ranges
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08879
All bound graphics shader objects must have either been created with the VK_SHADER_CREATE_DESCRIPTOR_HEAP_BIT_EXT flag set, or with identical or identically defined arrays of descriptor set layouts
VUID-vkCmdDrawMeshTasksIndirect2EXT-colorAttachmentCount-09372
If the current render pass instance was begun with vkCmdBeginRendering and a VkRenderingInfo::colorAttachmentCount equal to 1, a color attachment with a resolve mode of VK_RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_BIT_ANDROID, and a fragment shader is bound, it must not declare the DepthReplacing or StencilRefReplacingEXT execution modes
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDynamicStates-08715
If the bound graphics pipeline state includes a fragment shader stage, was created with VK_DYNAMIC_STATE_DEPTH_WRITE_ENABLE set in VkPipelineDynamicStateCreateInfo::pDynamicStates, and the fragment shader declares the EarlyFragmentTests execution mode and uses OpDepthAttachmentReadEXT, the depthWriteEnable parameter in the last call to vkCmdSetDepthWriteEnable must be VK_FALSE
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDynamicStates-08716
If the bound graphics pipeline state includes a fragment shader stage, was created with VK_DYNAMIC_STATE_STENCIL_WRITE_MASK set in VkPipelineDynamicStateCreateInfo::pDynamicStates, and the fragment shader declares the EarlyFragmentTests execution mode and uses OpStencilAttachmentReadEXT, the writeMask parameter in the last call to vkCmdSetStencilWriteMask must be 0
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09116
If a shader object is bound to any graphics stage or the bound graphics pipeline was created with VK_DYNAMIC_STATE_COLOR_WRITE_MASK_EXT, and the format of any color attachment is VK_FORMAT_E5B9G9R9_UFLOAT_PACK32, the corresponding element of the pColorWriteMasks parameter of vkCmdSetColorWriteMaskEXT must either include all of VK_COLOR_COMPONENT_R_BIT, VK_COLOR_COMPONENT_G_BIT, and VK_COLOR_COMPONENT_B_BIT, or none of them
VUID-vkCmdDrawMeshTasksIndirect2EXT-maxFragmentDualSrcAttachments-09239
If blending is enabled for any attachment where either the source or destination blend factors for that attachment use the secondary color input, the maximum value of Location for any output attachment statically used in the Fragment Execution Model executed by this command must be less than maxFragmentDualSrcAttachments
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09548
If the current render pass was begun with vkCmdBeginRendering, there is no shader object bound to any graphics stage, the value of each element of VkRenderingAttachmentLocationInfo::pColorAttachmentLocations in the bound pipeline must match the value for the corresponding locations set currently in the current render pass instance
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09549
If the current render pass was begun with vkCmdBeginRendering, and there is no shader object bound to any graphics stage, the value of each element of VkRenderingInputAttachmentIndexInfo::pColorAttachmentInputIndices in the bound pipeline must match the value for the corresponding index set currently in the current render pass instance
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10927
If the current render pass was begun with vkCmdBeginRendering, and there is no shader object bound to any graphics stage, the value of VkRenderingInputAttachmentIndexInfo::pDepthInputAttachmentIndex in the bound pipeline must match the value set currently in the current render pass instance
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10928
If the current render pass was begun with vkCmdBeginRendering, and there is no shader object bound to any graphics stage, the value of VkRenderingInputAttachmentIndexInfo::pStencilInputAttachmentIndex in the bound pipeline must match the value set currently in the current render pass instance
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09642
If the current render pass was begun with vkCmdBeginRendering with the VK_RENDERING_ENABLE_LEGACY_DITHERING_BIT_EXT flag, the bound graphics pipeline must have been created with VK_PIPELINE_CREATE_2_ENABLE_LEGACY_DITHERING_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-09643
If the bound graphics pipeline was created with VK_PIPELINE_CREATE_2_ENABLE_LEGACY_DITHERING_BIT_EXT, the current render pass must have begun with vkCmdBeginRendering with the VK_RENDERING_ENABLE_LEGACY_DITHERING_BIT_EXT flag
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10677
If the per-tile execution model is enabled, the tileShadingPerTileDraw feature must be enabled
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-10772
If a shader object is bound to any graphics stage, multiview functionality must not be enabled in the current render pass
VUID-vkCmdDrawMeshTasksIndirect2EXT-multiviewPerViewViewports-12262
If the multiviewPerViewViewports feature is enabled, then the index of the most significant bit in current render pass instance viewMask must be less than the current value of viewportCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-multiviewPerViewViewports-12263
If the multiviewPerViewViewports feature is enabled, then the index of the most significant bit in current render pass instance viewMask must be less than the current value of scissorCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-11521
If current render pass instance was begun with vkCmdBeginRendering with VkRenderingInfo::flags which includes VK_RENDERING_FRAGMENT_REGION_BIT_EXT, and if sample shading is enabled (explicitly or implicitly), then the minimum fraction for sample shading must equal 0.0
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11522
If the current render pass instance was begun with vkCmdBeginRendering and contains a custom resolve, and the dynamicRenderingUnusedAttachments feature is not enabled, the graphics pipeline bound must have been created with a VkCustomResolveCreateInfoEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11523
If the current render pass instance was begun with vkCmdBeginRendering and does not contain a custom resolve, and the dynamicRenderingUnusedAttachments feature is not enabled, the graphics pipeline bound must not have been created with a VkCustomResolveCreateInfoEXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-customResolve-11524
If the current render pass instance was begun with vkCmdBeginRendering and vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, the graphics pipeline bound must have been created with VkCustomResolveCreateInfoEXT::customResolve as VK_TRUE
VUID-vkCmdDrawMeshTasksIndirect2EXT-customResolve-11525
If the current render pass instance was begun with vkCmdBeginRendering and contains a custom resolve, and vkCmdBeginCustomResolveEXT has not been recorded in the render pass instance, the graphics pipeline bound must have been created with VkCustomResolveCreateInfoEXT::customResolve as VK_FALSE
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11861
If the dynamicRenderingUnusedAttachments feature is not enabled and the current render pass instance was begun with vkCmdBeginRendering and contains a custom resolve, the bound graphics pipeline must have been created with a VkCustomResolveCreateInfoEXT::colorAttachmentCount equal to VkRenderingInfo::colorAttachmentCount
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11862
If the dynamicRenderingUnusedAttachments feature is not enabled, and the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with an resolveImageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkCustomResolveCreateInfoEXT::pColorAttachmentFormats used to create the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11863
If the dynamicRenderingUnusedAttachments feature is not enabled, and the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with an resolveImageView equal to VK_NULL_HANDLE must have the corresponding element of VkCustomResolveCreateInfoEXT::pColorAttachmentFormats used to create the bound pipeline equal to VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-11864
If the dynamicRenderingUnusedAttachments feature is enabled, the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, and VkRenderingInfo::colorAttachmentCount greater than 0, then each element of the VkRenderingInfo::pColorAttachments array with an resolveImageView not equal to VK_NULL_HANDLE must have been created with a VkFormat equal to the corresponding element of VkCustomResolveCreateInfoEXT::pColorAttachmentFormats used to create the bound graphics pipeline, or the corresponding element of VkCustomResolveCreateInfoEXT::pColorAttachmentFormats, if it exists, must be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11865
If the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pDepthAttachment->resolveImageView was VK_NULL_HANDLE, the value of VkCustomResolveCreateInfoEXT::depthAttachmentFormat used to create the bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11866
If current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pDepthAttachment->resolveImageView was not VK_NULL_HANDLE, the value of VkCustomResolveCreateInfoEXT::depthAttachmentFormat used to create the bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->resolveImageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-11867
If the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, the dynamicRenderingUnusedAttachments feature is enabled, VkRenderingInfo::pDepthAttachment->resolveImageView was not VK_NULL_HANDLE, and the value of VkCustomResolveCreateInfoEXT::depthAttachmentFormat used to create the bound graphics pipeline was not equal to the VkFormat used to create VkRenderingInfo::pDepthAttachment->resolveImageView, the value of the format must be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11868
If the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pStencilAttachment->resolveImageView was VK_NULL_HANDLE, the value of VkCustomResolveCreateInfoEXT::stencilAttachmentFormat used to create the bound graphics pipeline must be equal to VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-11869
If current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, the dynamicRenderingUnusedAttachments feature is not enabled, and VkRenderingInfo::pStencilAttachment->resolveImageView was not VK_NULL_HANDLE, the value of VkCustomResolveCreateInfoEXT::stencilAttachmentFormat used to create the bound graphics pipeline must be equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->resolveImageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-dynamicRenderingUnusedAttachments-11870
If the current render pass instance was begun with vkCmdBeginRendering, it contains a custom resolve, the dynamicRenderingUnusedAttachments feature is enabled, VkRenderingInfo::pStencilAttachment->resolveImageView was not VK_NULL_HANDLE, and the value of VkCustomResolveCreateInfoEXT::stencilAttachmentFormat used to create the bound graphics pipeline was not equal to the VkFormat used to create VkRenderingInfo::pStencilAttachment->resolveImageView, the value of the format must be VK_FORMAT_UNDEFINED
VUID-vkCmdDrawMeshTasksIndirect2EXT-colorAttachmentCount-11871
If the current render pass instance was begun with vkCmdBeginRendering with a VkRenderingInfo::colorAttachmentCount parameter greater than 0 and vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, then for each element of the VkRenderingInfo::pColorAttachments array with a resolveImageView not equal to VK_NULL_HANDLE, the resolveImageView must have been created with a sample count equal to the value of rasterizationSamples for the bound graphics pipeline
VUID-vkCmdDrawMeshTasksIndirect2EXT-pDepthAttachment-11872
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, and VkRenderingInfo::pDepthAttachment->resolveImageView was not VK_NULL_HANDLE, the value of rasterizationSamples for the bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pDepthAttachment->resolveImageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-pStencilAttachment-11873
If the current render pass instance was begun with vkCmdBeginRendering, vkCmdBeginCustomResolveEXT has been recorded in the render pass instance, VkRenderingInfo::pStencilAttachment->resolveImageView was not VK_NULL_HANDLE, the value of rasterizationSamples for the bound graphics pipeline must be equal to the sample count used to create VkRenderingInfo::pStencilAttachment->resolveImageView
VUID-vkCmdDrawMeshTasksIndirect2EXT-customResolve-11529
If a shader object is bound to the fragment stage, the current render pass instance was begun with vkCmdBeginRendering, a fragment density map attachment is active, and vkCmdBeginCustomResolveEXT has been called, then the fragment shader object bound must have been created with VkCustomResolveCreateInfoEXT::customResolve as VK_TRUE
VUID-vkCmdDrawMeshTasksIndirect2EXT-customResolve-11530
If a shader object is bound to the fragment stage, the current render pass instance was begun with vkCmdBeginRendering and contains a custom resolve, a fragment density map attachment is active, and vkCmdBeginCustomResolveEXT has not yet been called, then the fragment shader object bound must have been created with VkCustomResolveCreateInfoEXT::customResolve as VK_FALSE
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-13361
If there are any shader objects bound that were created with flags that includes the VK_SHADER_CREATE_INDEPENDENT_SETS_BIT_KHR bit, then all bound shader objects must have been created with the VK_SHADER_CREATE_INDEPENDENT_SETS_BIT_KHR bit
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-13362
If there are any shader objects bound that were created with flags that includes the VK_SHADER_CREATE_INDEPENDENT_SETS_BIT_KHR bit, then the pipeline layout of the bound descriptor sets must have been created with VK_PIPELINE_LAYOUT_CREATE_INDEPENDENT_SETS_BIT_EXT set
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-13363
If there are any shader objects bound that were created with flags that includes the VK_SHADER_CREATE_INDEPENDENT_SETS_BIT_KHR bit, and any of the descriptor set layouts used to create the pipeline layout of the bound descriptor sets were created with any binding’s VkDescriptorSetLayoutBinding::stageFlags set with VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT, then there must be no binding with VkDescriptorSetLayoutBinding::stageFlags set with VK_SHADER_STAGE_TASK_BIT_EXT or VK_SHADER_STAGE_MESH_BIT_EXT
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-13364
If there are any shader objects bound that were created with flags that includes both the VK_SHADER_CREATE_INDEPENDENT_SETS_BIT_KHR and VK_SHADER_CREATE_NO_TASK_SHADER_BIT_EXT bits, the pipeline layout of the bound descriptor sets must have been created with VK_PIPELINE_LAYOUT_CREATE_NO_TASK_SHADER_BIT_KHR set
VUID-vkCmdDrawMeshTasksIndirect2EXT-flags-13365
If there are any shader objects bound that were created with flags that includes both the VK_SHADER_CREATE_INDEPENDENT_SETS_BIT_KHR and VK_SHADER_CREATE_NO_TASK_SHADER_BIT_EXT bits, there must be no shader object bound to the VK_SHADER_STAGE_TASK_BIT_EXT stage

VUID-vkCmdDrawMeshTasksIndirect2EXT-stage-06480
The bound graphics pipeline must not have been created with the VkPipelineShaderStageCreateInfo::stage member of any element of VkGraphicsPipelineCreateInfo::pStages set to VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-pStages-10680
If there is no bound graphics pipeline, vkCmdBindShadersEXT must not have last bound the pStages element of VK_SHADER_STAGE_VERTEX_BIT, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT or VK_SHADER_STAGE_GEOMETRY_BIT with a valid shader object other than VK_NULL_HANDLE
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07074
Transform Feedback Queries must not be active
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-07075
Primitives Generated Queries must not be active
VUID-vkCmdDrawMeshTasksIndirect2EXT-pipelineStatistics-07076
The pipelineStatistics member used to create any active Pipeline Statistics Query must not contain VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_VERTICES_BIT, VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_PRIMITIVES_BIT, VK_QUERY_PIPELINE_STATISTIC_VERTEX_SHADER_INVOCATIONS_BIT, VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_INVOCATIONS_BIT, VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_PRIMITIVES_BIT, VK_QUERY_PIPELINE_STATISTIC_CLIPPING_INVOCATIONS_BIT, VK_QUERY_PIPELINE_STATISTIC_CLIPPING_PRIMITIVES_BIT, VK_QUERY_PIPELINE_STATISTIC_TESSELLATION_CONTROL_SHADER_PATCHES_BIT, or VK_QUERY_PIPELINE_STATISTIC_TESSELLATION_EVALUATION_SHADER_INVOCATIONS_BIT
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08694
If there is no bound graphics pipeline, and both the taskShader and meshShader features are enabled, and a valid VkShaderEXT is bound the to the VK_SHADER_STAGE_MESH_BIT_EXT stage, and that VkShaderEXT was created without the VK_SHADER_CREATE_NO_TASK_SHADER_BIT_EXT flag, a valid VkShaderEXT must be bound to the VK_SHADER_STAGE_TASK_BIT_EXT stage
VUID-vkCmdDrawMeshTasksIndirect2EXT-None-08695
If there is no bound graphics pipeline, and both the taskShader and meshShader features are enabled, and a valid VkShaderEXT is bound the to the VK_SHADER_STAGE_MESH_BIT_EXT stage, and that VkShaderEXT was created with the VK_SHADER_CREATE_NO_TASK_SHADER_BIT_EXT flag, there must be no VkShaderEXT bound to the VK_SHADER_STAGE_TASK_BIT_EXT stage
VUID-vkCmdDrawMeshTasksIndirect2EXT-commandBuffer-13067
commandBuffer must not be a protected command buffer

Valid Usage (Implicit)

VUID-vkCmdDrawMeshTasksIndirect2EXT-commandBuffer-parameter
commandBuffer must be a valid VkCommandBuffer handle
VUID-vkCmdDrawMeshTasksIndirect2EXT-pInfo-parameter
pInfo must be a valid pointer to a valid VkDrawIndirect2InfoKHR structure
VUID-vkCmdDrawMeshTasksIndirect2EXT-commandBuffer-recording
commandBuffer must be in the recording state
VUID-vkCmdDrawMeshTasksIndirect2EXT-commandBuffer-cmdpool
The VkCommandPool that commandBuffer was allocated from must support VK_QUEUE_GRAPHICS_BIT operations
VUID-vkCmdDrawMeshTasksIndirect2EXT-renderpass
This command must only be called inside of a render pass instance
VUID-vkCmdDrawMeshTasksIndirect2EXT-suspended
This command must not be called between suspended render pass instances
VUID-vkCmdDrawMeshTasksIndirect2EXT-videocoding
This command must only be called outside of a video coding scope

Host Synchronization

Host access to commandBuffer must be externally synchronized
Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized