autofs-5.1.5 - fix typing errors From: Andreas P Fix typing errors of various files. Signed-off-by: Andreas P Signed-off-by: Ian Kent --- CHANGELOG | 1 + Makefile.conf.in | 2 +- README.amd-maps | 4 ++-- man/autofs.5 | 12 ++++++----- redhat/autofs.conf.default.in | 42 ++++++++++++++++++++-------------------- samples/autofs.conf.default.in | 22 ++++++++++----------- samples/autofs.init.conf | 2 +- 7 files changed, 43 insertions(+), 42 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 956a33b7..44ce6b69 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -10,6 +10,7 @@ xx/xx/2019 autofs-5.1.6 - make expire remaining log level debug. - allow period following macro in selector value. - fix macro expansion in selector values. +- fix typing errors. 30/10/2018 autofs-5.1.5 - fix flag file permission. diff --git a/Makefile.conf.in b/Makefile.conf.in index ff9b18a1..a1e5eada 100644 --- a/Makefile.conf.in +++ b/Makefile.conf.in @@ -72,7 +72,7 @@ RANLIB = @PATH_RANLIB@ TIRPCLIB = @TIRPC_LIBS@ TIRPCCFLAGS = @TIRPC_CFLAGS@ -# Use dmalloc for memory debuging +# Use dmalloc for memory debugging DMALLOCLIB = @DMALLOCLIB@ # diff --git a/README.amd-maps b/README.amd-maps index c7e22c8d..d933a678 100644 --- a/README.amd-maps +++ b/README.amd-maps @@ -61,8 +61,8 @@ add it below the autofs configuration. Apart from changing the amd changed. However, quite a few amd configuration options don't have meaning within autofs. When these options are seen they are logged. -Be aware that, if the an old configuration exists and the configuration -hasn't been updated after the installation, changes to the the old +Be aware that, if an old configuration exists and the configuration +hasn't been updated after the installation, changes to the old configuration will override changes to the new configuration because backward compatibility takes priority over the new implementation. diff --git a/man/autofs.5 b/man/autofs.5 index c2421272..2c224e18 100644 --- a/man/autofs.5 +++ b/man/autofs.5 @@ -304,32 +304,32 @@ The \fBselectors\fP that take no arguments are: .TP .B arch .br -The machine architecture which, if not set in the confugration, is +The machine architecture which, if not set in the configuration, is obtained using uname(2). .TP .B karch .br -The machine kernel architecture which, if not set in the confugration, +The machine kernel architecture which, if not set in the configuration, is obtained using uname(2). .TP .B os .br -The operating system name, if not set in the confugration, is obtained +The operating system name, if not set in the configuration, is obtained using uname(2). .TP .B osver .br -The operating system version, if not set in the confugration, is obtained +The operating system version, if not set in the configuration, is obtained using uname(2). .TP .B full_os .br -The full operating system name, if not set in the confugration this selector +The full operating system name, if not set in the configuration this selector has no value. .TP .B vendor .br -The operating system vendor name, if not set in the confugration this selector +The operating system vendor name, if not set in the configuration this selector has the value "unknown". .TP .B byte diff --git a/redhat/autofs.conf.default.in b/redhat/autofs.conf.default.in index 4b89a5f7..a1b5906c 100644 --- a/redhat/autofs.conf.default.in +++ b/redhat/autofs.conf.default.in @@ -7,7 +7,7 @@ # #master_map_name = auto.master # -# timeout - set the default mount timeout in secons. The internal +# timeout - set the default mount timeout in seconds. The internal # program default is 10 minutes, but the default installed # configuration overrides this and sets the timeout to 5 # minutes to be consistent with earlier autofs releases. @@ -51,13 +51,13 @@ timeout = 300 browse_mode = no # # mount_nfs_default_protocol - set the default protocol that mount.nfs(8) -# uses when performing a mount. Autofs needs -# to know the default NFS protocol that -# mount.nfs(8) uses so it can do special case -# handling for its availability probe for -# different NFS protocols. Since we can't -# identify the default automatically we need -# to set it in our configuration. +# uses when performing a mount. Autofs needs +# to know the default NFS protocol that +# mount.nfs(8) uses so it can do special case +# handling for its availability probe for +# different NFS protocols. Since we can't +# identify the default automatically we need +# to set it in our configuration. # #mount_nfs_default_protocol = 3 mount_nfs_default_protocol = 4 @@ -71,9 +71,9 @@ mount_nfs_default_protocol = 4 #logging = none # # force_standard_program_map_env - disable the use of the "AUTOFS_" -# prefix for standard environemt variables when +# prefix for standard environment variables when # executing a program map. Since program maps -# are run as the privileded user this opens +# are run as the privileged user this opens # automount(8) to potential user privilege # escalation when the program map is written # in a language that can load components from, @@ -92,7 +92,7 @@ mount_nfs_default_protocol = 4 # # Define server URIs # -# ldap_uri - space seperated list of server uris of the form +# ldap_uri - space separated list of server uris of the form # ://[/] where can be ldap # or ldaps. The option can be given multiple times. # Map entries that include a server name override @@ -111,7 +111,7 @@ mount_nfs_default_protocol = 4 # #ldap_uri = "" # -# ldap_timeout - timeout value for the synchronous API calls +# ldap_timeout - timeout value for the synchronous API calls # (default is LDAP library default). # #ldap_timeout = -1 @@ -167,11 +167,11 @@ mount_nfs_default_protocol = 4 #map_hash_table_size = 1024 # # use_hostname_for_mounts - nfs mounts where the host name resolves -# to more than one IP address normally need -# to use the IP address to esure a mount to -# a host that isn't responding isn't done. -# If that behaviour is not wanted then set -# ths to "yes", default is "no". +# to more than one IP address normally need +# to use the IP address to ensure a mount to +# a host that isn't responding isn't done. +# If that behaviour is not wanted then set +# this to "yes", default is "no". # #use_hostname_for_mounts = "no" # @@ -184,7 +184,7 @@ mount_nfs_default_protocol = 4 #disable_not_found_message = "no" # # sss_master_map_wait - When sssd is starting up it can sometimes return -# "no such entry" for a short time until it has read +# "no such entry" for a short time until it has read # in the LDAP map information. Internal default is 0 # seconds, don't wait but if there is a problem with # autofs not finding the master map at startup (when @@ -350,7 +350,7 @@ mount_nfs_default_protocol = 4 # is translated in its official host name. # # domain_strip - if set to "yes" the domain name part of the host -# is strippped when normalizing hostnames. This can be useful +# is stripped when normalizing hostnames. This can be useful # when using of the same maps in a multiple domain environment. # # normalize_slashes - is set to "yes" by default and will collapse @@ -395,8 +395,8 @@ dismount_interval = 300 # # Overriding this can cause autofs to use less resources because # it will use symlinks instead of bind mounts in certain cases. -# You should ensure that the autofs kernel module your using -# supports expration of symlinks for best results (although this +# You should ensure that the autofs kernel module you are using +# supports expiration of symlinks for best results (although this # appears to work reasonably well most of the time without the # update). # diff --git a/samples/autofs.conf.default.in b/samples/autofs.conf.default.in index 2f155111..4831b42c 100644 --- a/samples/autofs.conf.default.in +++ b/samples/autofs.conf.default.in @@ -7,7 +7,7 @@ # #master_map_name = auto.master # -# timeout - set the default mount timeout in secons. The internal +# timeout - set the default mount timeout in seconds. The internal # program default is 10 minutes, but the default installed # configuration overrides this and sets the timeout to 5 # minutes to be consistent with earlier autofs releases. @@ -19,7 +19,7 @@ timeout = 300 # be read at program start (default 10, wait # for 10 seconds then continue). # -# master_wait = 10 +#master_wait = 10 # # negative_timeout - set the default negative timeout for # failed mount attempts (default 60). @@ -70,9 +70,9 @@ browse_mode = no #logging = none # # force_standard_program_map_env - disable the use of the "AUTOFS_" -# prefix for standard environemt variables when +# prefix for standard environment variables when # executing a program map. Since program maps -# are run as the privileded user this opens +# are run as the privileged user this opens # automount(8) to potential user privilege # escalation when the program map is written # in a language that can load components from, @@ -91,7 +91,7 @@ browse_mode = no # # Define server URIs # -# ldap_uri - space seperated list of server uris of the form +# ldap_uri - space separated list of server uris of the form # ://[/] where can be ldap # or ldaps. The option can be given multiple times. # Map entries that include a server name override @@ -110,7 +110,7 @@ browse_mode = no # #ldap_uri = "" # -# ldap_timeout - timeout value for the synchronous API calls +# ldap_timeout - timeout value for the synchronous API calls # (default is LDAP library default). # #ldap_timeout = -1 @@ -167,10 +167,10 @@ browse_mode = no # # use_hostname_for_mounts - nfs mounts where the host name resolves # to more than one IP address normally need -# to use the IP address to esure a mount to +# to use the IP address to ensure a mount to # a host that isn't responding isn't done. # If that behaviour is not wanted then set -# ths to "yes", default is "no". +# this to "yes", default is "no". # #use_hostname_for_mounts = "no" # @@ -349,7 +349,7 @@ browse_mode = no # is translated in its official host name. # # domain_strip - if set to "yes" the domain name part of the host -# is strippped when normalizing hostnames. This can be useful +# is stripped when normalizing hostnames. This can be useful # when using of the same maps in a multiple domain environment. # # normalize_slashes - is set to "yes" by default and will collapse @@ -394,8 +394,8 @@ dismount_interval = 300 # # Overriding this can cause autofs to use less resources because # it will use symlinks instead of bind mounts in certain cases. -# You should ensure that the autofs kernel module your using -# supports expration of symlinks for best results (although this +# You should ensure that the autofs kernel module you are using +# supports expiration of symlinks for best results (although this # appears to work reasonably well most of the time without the # update). # diff --git a/samples/autofs.init.conf b/samples/autofs.init.conf index 2ca53ffb..01716964 100644 --- a/samples/autofs.init.conf +++ b/samples/autofs.init.conf @@ -1,5 +1,5 @@ # -# Init syatem options +# Init system options # # If the kernel supports using the autofs miscellanous device # and you wish to use it you must set this configuration option