DESCRIPTION: ------------ This is version 1.11-dev of Apache::AuthDBI and Apache::DBI. These modules are supposed to be used with the Apache server together with an embedded perl interpreter like mod_perl. They provide support for basic authentication and authorization as well as support for persistent database connections via Perl's Database Independent Interface (DBI). o DBI.pm provides persistent database connections: - connections can be established during server-startup - configurable rollback to ensure data integrity - configurable verification of the connections to avoid time-outs. o AuthDBI.pm provides authentication and authorization: - optional shared cache for passwords to minimize database load - configurable cleanup-handler deletes outdated entries from the cache Apache::DBI has been in widespread deployment on many platforms for years. Apache::DBI is one of the most widely used mod_perl related modules. It can be considered stable. RECENT CHANGES: --------------- See the Changes file for more detail DEVELOPMENT: ------------ Apache::DBI is in svn at perl.org; see http://svn.perl.org/modules/Apache-DBI EXAMPLES: --------- Here we explain only some simple examples. For further information and limitations please read the module documentation. 1. user authentication Suppose you want to restrict access to a certain URL to a specific user and the necessary information for restricting user access is stored in your database. A typical setup would be the following: conf/httpd.conf: PerlModule Apache::AuthDBI URL/.htaccess: AuthName DBI AuthType Basic PerlAuthenHandler Apache::AuthDBI::authen PerlSetVar Auth_DBI_data_source dbi:driver:dsn PerlSetVar Auth_DBI_username db_username PerlSetVar Auth_DBI_password db_password # DBI->connect($data_source, $username, $password) PerlSetVar Auth_DBI_pwd_table users PerlSetVar Auth_DBI_uid_field username PerlSetVar Auth_DBI_pwd_field password #SELECT pwd_field FROM pwd_table WHERE uid_field=$user require user myuser In this example it is assumed, that your database contains a table named 'users' which has at least the two columns 'username' and 'password'. When accessing the URL for the first time a requester pops up, asking for username and password. For authentication the module retrieves for the given username the password from the database. This is compared with the crypted password given by the user. If the check succeeds, the user is given access to the specified URL. Please do not confuse this user authentication with the username/password needed for the database connect. These two authentications are completely independent ! Windows users should turn off the case-sensitive option. 2. group authorization Suppose you want to restrict access to a certain URL to a specific user group and the necessary information for restricting user access is stored in your database. A typical setup would be the following: conf/httpd.conf: PerlModule Apache::AuthDBI URL/.htaccess: AuthName DBI AuthType Basic PerlAuthenHandler Apache::AuthDBI::authen PerlAuthzHandler Apache::AuthDBI::authz PerlSetVar Auth_DBI_data_source dbi:mydriver:mydsn PerlSetVar Auth_DBI_username db_username PerlSetVar Auth_DBI_password db_password # DBI->connect($data_source, $username, $password) PerlSetVar Auth_DBI_pwd_table users PerlSetVar Auth_DBI_uid_field username PerlSetVar Auth_DBI_pwd_field password PerlSetVar Auth_DBI_grp_field groupname #SELECT grp_field FROM pwd_table WHERE uid_field=$user require group mygroup In this example it is assumed, that your database contains a table named 'users' which has at least the three columns 'username', 'password' and 'groupname'. When accessing the URL for the first time a requester pops up, asking for username and password. The first check (authentication) retrieves for the given username the password from the database. This is compared with the crypted password given by the user. In a second check (authorization) the groups of the given username are looked up in the database and compared with the groups required in the .htaccess file. If both checks succeed, the user is given access to the specified URL. Please do not confuse the user authentication with the username/password needed for the database connect. These two authentications are completely independent ! Although authorization handles all types of basic authentication it is perfectly sufficient to configure only authentication, as long, as the require token restricts access to 'valid-user' or to one or more single user names. You need to configure authorization only if you have more than one require token or if the require token contains one or more group names. 3. persistent database connection The following information is intended to motivate the use of persistent database connections and to explain the necessary configuration. In the above example for user authorization the requester asking for username and password pops up only once. The browser stores the user input and provides it to subsequent requests. But the sequence of two database accesses is done for every request, e.g. if your restricted URL contains a HTML page with some images, this sequence is executed once for the HTML page and once for every image ! For databases which needs a significant amount of time for the connect (e.g. start of a backend process) this might become an unacceptable overhead for the authorization procedure. This drawback can be overcome with the use of persistent database connections as provided by the Apache::DBI module. The benefit of a persistent database connection is not limited to the use of authorization. Every application, which does a lot of database queries, should gain a significant performance boost, when using persistent database connections. If you plan to use persistent database connections, there is only one thing to do: add the following configuration directive to conf/httpd.conf or to your startup.pl: PerlModule Apache::DBI # this comes first !! .... # other modules using DBI Do not change your perl scripts ! In particular do not add any 'use Apache::DBI;' statements. Also there is no need to remove the $dbh->disconnect statements from your perl scripts. The DBI module checks when it is loaded if the Apache::DBI module has been loaded before (that's the reason the Apache::DBI module has to come first). In this case, during the database connect, control flow goes through the Apache::DBI module which stores the new database handle in a global hash and which overloads the disconnect method with a do-nothing. With the above configuration every server initiates a database connection upon the first connect request. Sometimes it is more convenient to initiate all needed database handles upon process startup. This can be done with the method: Apache::DBI->connect_on_init($data_source, $username, $auth, \%attr) This method is supposed to be called in a startup file, in which also all needed modules can be loaded. As an example the file startup.pl is provided. Add all other modules you need to this file and just add one line to your httpd.conf: PerlRequire /usr/local/apache/perl/startup.pl This way all modules are pulled into the main httpd process. When the main process forks his children, the code of all modules is already in place and the database handle will also be initiated. WARNING: Do not attempt to open a persistent database connection in the parent process (via PerlRequire or PerlModule). If you do, children will get a copy of this handle, causing clashes when the handle is used by two processes at the same time. Each child must have it's own unique connection handle. For the same reason it is not possible, to share one database handle between all servers using some IPC mechanism. If you want to make sure that the module works correctly, turn on debugging as described below and search for 'Apache::DBI' in the output. You should get one 'new connect' message for every server process. Any subsequent request should result in a 'already connected' message. Please keep in mind, that server processes may be killed as well as newly created depending upon your configuration and depending upon your load. Every new server process needs to do its own initial database connect. Another useful method for enhancing the performance is to enable the caching in AuthDBI setting Auth_DBI_cache_time > 0 and to use shared memory for the cache (see the module documentation for details). This will reduce the database load considerably. COPYRIGHT: ---------- You may distribute under the terms of either the GNU General Public License or the Artistic License, as specified in the Perl README file. PREREQUISITES: -------------- Configure mod_perl1 with: perl Makefile.PL PERL_CHILD_INIT=1 PERL_AUTHEN=1 PERL_AUTHZ=1 PERL_CLEANUP=1 PERL_STACKED_HANDLERS=1 If there are no security reasons to limit the API, just use EVERYTHING=1. mod_perl2 RC5 and higher should work with Apache::DBI 0.96 and higher. No specific switches must be passed to mod_perl2's Makefile.PL. INSTALLATION: ------------- perl Makefile.PL make make test # only works with MySQL so far; patches welcome make install IF YOU HAVE PROBLEMS: --------------------- Please read the README and the the module documentation: 'perldoc Apache::AuthDBI', 'perldoc Apache::DBI'. Please verify your setup: turn on debug output and compare it to traces.txt. If you have problems with persistent database connections, verify that everything works correct without using Apache::DBI. Before sending a bug report it might be useful to look at the debug output. To enable full debug output set the following variables in startup.pl or in your perl script: $Apache::DBI::DEBUG = 2; $Apache::AuthDBI::DEBUG = 2; and watch the error_log. Compare the output to the traces in traces.txt. If this doesn't help, please send an email to and include the following information in your bug-report: - debug output, - output of perl -V, - version of ApacheDBI, - version of DBI, - used database A common problem is an error-message that $dbh will not stay shared. A complete explanation for this behavior is given in the modperl-FAQ. In short, instead of this: my $dbh = ...; subroutine(); sub subroutine { $dbh->.... } do this: my $dbh = ...; subroutine($dbh); sub subroutine { my $dbh = shift; $dbh->.... } FURTHER INFORMATION: -------------------- mod_perl by Doug MacEachern modperl-subscribe@perl.apache.org http://perl.apache.org/ DBI by Tim Bunce dbi-users-subscribe@perl.org http://dbi.perl.org/ Apache by Apache Group news:comp.infosystems.www.servers.unix users-subscribe@httpd.apache.org http://httpd.apache.org/ --------------------------------------------------------------------------- Edmund Mergl Ask Bjoern Hansen Philip M. Gollucci ---------------------------------------------------------------------------