NAME

    Device::GBA - Perl Interface to the Gameboy Advance

VERSION

    version 0.002

SYNOPSIS

        use Device::GBA;
    
        my $gba = Device::GBA->new(buspirate => '/dev/ttyUSB0') or die "No such device!\n";
        $gba->upload('helloworld.gba');

DESCRIPTION

    The Nintendo Gameboy Advance can either boot from cartridge or over
    link cable. The latter is caled multiboot mode and is basically SPI and
    a homebrew encoding scheme. Unfortunately, the Bus Pirate doesn't have
    a 100k SPI mode, so we are using 125000 instead. If you encounter
    problems with booting, use the next lower speed (30000) as bitrate.
    This utility allows uploading multiboot GBA images via
    Device::Chip::Adapters. Don't forget to pass -specs=gba_mb.specs to
    devkitARM GCC if you want to link a multiboot image. The package's
    share/ subdirectory contains an example Makefile
    <https://github.com/athreef/Device-GBA/blob/master/share/testimg/Makefile>
    for cross-compilation. The wiring is as follows:

        GBA     Bus Pirate
        SO  --> MISO
        SI  <-- MOSI
        CLK <-- CLK
        GND --- GND

    (Note to myself:) The cable I made looks like this:

                                 ___________________
        .--------GND (white)----/      .-------._  |
        |  .-----SD (black)------------|SD (B) |_  |
        |  |  .--SO (yellow)---,      -|SC (R) |_--+-.
       _|__|__|_                \     -|GND (W)|_--' |
      / 6  4  2 \                \____-|SO (Y) |_    |
      \_5_ 3 _1_/                  ___-|SI (O) |_    |
        | \_/ '-- VDD (n/a)       /    '-------'     |
        |  '----- SI (orange) ---/                   |
        '-------- SC (red) --------------------------'

    Note: This is still work in progress!

METHODS AND ARGUMENTS

    new()

      Opens specified device and returns the corresponding object
      reference. Returns undef if an attempt to open the device has failed.
      Accepts following parameters:

      adapter

	An instance of Device::Chip::Adapter capable of SPI communication.

      verbose

	if true, methods on this instance will narrate what they're doing.
	Default is 0.

    upload

          $gba->upload($firmware_file)

      Reads in $firmware_file and uploads it to the Gameboy Advance.

    spi_readwrite

          $miso = $gba->spi_readwrite($mosi)

      reads and writes 32 bit from the SPI bus.

    crc

          $c = Device::GBA::crc($w, [$c = 0x0000c387])

      Calculates CRC for word $w and CRC $c according to the algrithm used
      by the GBA multiboot protocol.

GIT REPOSITORY

    http://github.com/athreef/Device-GBA

SEE ALSO

    gba -- The command line utility

AUTHOR

    Ahmad Fatoum <athreef@cpan.org>, http://a3f.at

    Based on The uploader written by Ken Kaarvik.

COPYRIGHT AND LICENSE

    Copyright (C) 2018 Ahmad Fatoum

    This library is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License v2.0 or later.