NAME

    Archive::Libarchive::FFI - (Deprecated) Perl bindings to libarchive via
    FFI

VERSION

    version 0.0902

SYNOPSIS

    list archive filenames

     use Archive::Libarchive::FFI qw( :all );
     
     my $archive = archive_read_new();
     archive_read_support_filter_all($archive);
     archive_read_support_format_all($archive);
     # example is a tar file, but any supported format should work
     # (zip, iso9660, etc.)
     archive_read_open_filename($archive, 'archive.tar', 10240);
     
     while(archive_read_next_header($archive, my $entry) == ARCHIVE_OK)
     {
       print archive_entry_pathname($entry), "\n";
       archive_read_data_skip($archive);
     }
     
     archive_read_free($archive);

    extract archive

     use Archive::Libarchive::FFI qw( :all );
     
     my $archive = archive_read_new();
     archive_read_support_filter_all($archive);
     archive_read_support_format_all($archive);
     my $disk = archive_write_disk_new();
     archive_write_disk_set_options($disk,
       ARCHIVE_EXTRACT_TIME   |
       ARCHIVE_EXTRACT_PERM   |
       ARCHIVE_EXTRACT_ACL    |
       ARCHIVE_EXTRACT_FFLAGS
     );
     archive_write_disk_set_standard_lookup($disk);
     archive_read_open_filename($archive, 'archive.tar', 10240);
     
     while(1)
     {
       my $r = archive_read_next_header($archive, my $entry);
       last if $r == ARCHIVE_EOF;
     
       archive_write_header($disk, $entry);
     
       while(1)
       {
         my $r = archive_read_data_block($archive, my $buffer, my $offset);
         last if $r == ARCHIVE_EOF;
         archive_write_data_block($disk, $buffer, $offset);
       }
     }
     
     archive_read_close($archive);
     archive_read_free($archive);
     archive_write_close($disk);
     archive_write_free($disk);

    write archive

     use File::stat;
     use File::Slurp qw( read_file );
     use Archive::Libarchive::FFI qw( :all );
     
     my $archive = archive_write_new();
     # many other formats are supported ...
     archive_write_set_format_pax_restricted($archive);
     archive_write_open_filename($archive, 'archive.tar');
     
     foreach my $filename (@filenames)
     {
       my $entry = archive_entry_new();
       archive_entry_set_pathname($entry, $filename);
       archive_entry_set_size($entry, stat($filename)->size);
       archive_entry_set_filetype($entry, AE_IFREG);
       archive_entry_set_perm($entry, 0644);
       archive_write_header($archive, $entry);
       archive_write_data($archive, scalar read_file($filename));
       archive_entry_free($entry);
     }
     archive_write_close($archive);
     archive_write_free($archive);

DESCRIPTION

    NOTE: This module has been deprecated in favor of Archive::Libarchive.
    It provides a better thought out object-oriented interface and is
    easier to maintain.

    This module provides a functional interface to libarchive. libarchive
    is a C library that can read and write archives in a variety of formats
    and with a variety of compression filters, optimized in a stream
    oriented way. A familiarity with the libarchive documentation would be
    helpful, but may not be necessary for simple tasks. The documentation
    for this module is split into four separate documents:

    Archive::Libarchive::FFI

      This document, contains an overview and some examples.

    Archive::Libarchive::FFI::Callback

      Documents the callback interface, used for customizing input and
      output.

    Archive::Libarchive::FFI::Constant

      Documents the constants provided by this module.

    Archive::Libarchive::FFI::Function

      The function reference, includes a list of all functions provided by
      this module.

    If you are linking against an older version of libarchive, some
    functions and constants may not be available. You can use the can
    method to test if a function or constant is available, for example:

     if(Archive::Libarchive::FFI->can('archive_read_support_filter_grzip')
     {
       # grzip filter is available.
     }
     
     if(Archive::Libarchive::FFI->can('ARCHIVE_OK'))
     {
       # ... although ARCHIVE_OK should always be available.
     }

EXAMPLES

    These examples are translated from equivalent C versions provided on
    the libarchive website, and are annotated here with Perl specific
    details. These examples are also included with the distribution.

 List contents of archive stored in file

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     # this is a translation to perl for this:
     #  https://github.com/libarchive/libarchive/wiki/Examples#wiki-List_contents_of_Archive_stored_in_File
     
     my $a = archive_read_new();
     archive_read_support_filter_all($a);
     archive_read_support_format_all($a);
     
     my $r = archive_read_open_filename($a, "archive.tar", 10240);
     if($r != ARCHIVE_OK)
     {
       die "error opening archive.tar: ", archive_error_string($a);
     }
     
     while (archive_read_next_header($a, my $entry) == ARCHIVE_OK)
     {
       print archive_entry_pathname($entry), "\n";
       archive_read_data_skip($a);
     }
     
     $r = archive_read_free($a);
     if($r != ARCHIVE_OK)
     {
       die "error freeing archive";
     }

 List contents of archive stored in memory

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     # this is a translation to perl for this:
     #  https://github.com/libarchive/libarchive/wiki/Examples#wiki-List_contents_of_Archive_stored_in_Memory
     
     my $buff = do {
       open my $fh, '<', "archive.tar.gz";
       local $/;
       <$fh>
     };
     
     my $a = archive_read_new();
     archive_read_support_filter_gzip($a);
     archive_read_support_format_tar($a);
     my $r = archive_read_open_memory($a, $buff);
     if($r != ARCHIVE_OK)
     {
       print "r = $r\n";
       die "error opening archive.tar: ", archive_error_string($a);
     }
     
     while (archive_read_next_header($a, my $entry) == ARCHIVE_OK) {
       print archive_entry_pathname($entry), "\n";
       archive_read_data_skip($a);
     }
     
     $r = archive_read_free($a);
     if($r != ARCHIVE_OK)
     {
       die "error freeing archive";
     }

 List contents of archive with custom read functions

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     list_archive(shift @ARGV);
     
     sub list_archive
     {
       my $name = shift;
       my %mydata;
       my $a = archive_read_new();
       $mydata{name} = $name;
       open $mydata{fh}, '<', $name;
       archive_read_support_filter_all($a);
       archive_read_support_format_all($a);
       archive_read_open($a, \%mydata, undef, \&myread, \&myclose);
       while(archive_read_next_header($a, my $entry) == ARCHIVE_OK)
       {
         print archive_entry_pathname($entry), "\n";
       }
       archive_read_free($a);
     }
     
     sub myread
     {
       my($archive, $mydata) = @_;
       my $br = read $mydata->{fh}, my $buffer, 10240;
       return (ARCHIVE_OK, $buffer);
     }
     
     sub myclose
     {
       my($archive, $mydata) = @_;
       close $mydata->{fh};
       %$mydata = ();
       return ARCHIVE_OK;
     }

 A universal decompressor

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     # this is a translation to perl for this:
     #  https://github.com/libarchive/libarchive/wiki/Examples#a-universal-decompressor
     
     my $r;
     
     my $a = archive_read_new();
     archive_read_support_filter_all($a);
     archive_read_support_format_raw($a);
     $r = archive_read_open_filename($a, "hello.txt.gz.uu", 16384);
     if($r != ARCHIVE_OK)
     {
       die archive_error_string($a);
     }
     
     $r = archive_read_next_header($a, my $ae);
     if($r != ARCHIVE_OK)
     {
       die archive_error_string($a);
     }
     
     while(1)
     {
       my $size = archive_read_data($a, my $buff, 1024);
       if($size < 0)
       {
         die archive_error_string($a);
       }
       if($size == 0)
       {
         last;
       }
       print $buff;
     }
     
     archive_read_free($a);

 A basic write example

     use strict;
     use warnings;
     use autodie;
     use File::stat;
     use Archive::Libarchive::FFI qw( :all );
     
     # this is a translation to perl for this:
     #  https://github.com/libarchive/libarchive/wiki/Examples#wiki-A_Basic_Write_Example
     
     sub write_archive
     {
       my($outname, @filenames) = @_;
     
       my $a = archive_write_new();
     
       archive_write_add_filter_gzip($a);
       archive_write_set_format_pax_restricted($a);
       archive_write_open_filename($a, $outname);
     
       foreach my $filename (@filenames)
       {
         my $st = stat $filename;
         my $entry = archive_entry_new();
         archive_entry_set_pathname($entry, $filename);
         archive_entry_set_size($entry, $st->size);
         archive_entry_set_filetype($entry, AE_IFREG);
         archive_entry_set_perm($entry, 0644);
         archive_write_header($a, $entry);
         open my $fh, '<', $filename;
         my $len = read $fh, my $buff, 8192;
         while($len > 0)
         {
           archive_write_data($a, $buff);
           $len = read $fh, $buff, 8192;
         }
         close $fh;
     
         archive_entry_free($entry);
       }
       archive_write_close($a);
       archive_write_free($a);
     }
     
     unless(@ARGV > 0)
     {
       print "usage: perl basic_write.pl archive.tar.gz file1 [ file2 [ ... ] ]\n";
       exit 2;
     }
     
     unless(@ARGV > 1)
     {
       print "Cowardly refusing to create an empty archive\n";
       exit 2;
     }
     
     write_archive(@ARGV);

 Constructing objects on disk

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     # this is a translation to perl for this:
     #  https://github.com/libarchive/libarchive/wiki/Examples#wiki-Constructing_Objects_On_Disk
     
     my $a = archive_write_disk_new();
     archive_write_disk_set_options($a, ARCHIVE_EXTRACT_TIME);
     
     my $entry = archive_entry_new();
     archive_entry_set_pathname($entry, "my_file.txt");
     archive_entry_set_filetype($entry, AE_IFREG);
     archive_entry_set_size($entry, 5);
     archive_entry_set_mtime($entry, 123456789, 0);
     archive_entry_set_perm($entry, 0644);
     archive_write_header($a, $entry);
     archive_write_data($a, "abcde");
     archive_write_finish_entry($a);
     archive_write_free($a);
     archive_entry_free($entry);

 A complete extractor

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     # this is a translation to perl for this:
     #  https://github.com/libarchive/libarchive/wiki/Examples#wiki-A_Complete_Extractor
     
     my $filename = shift @ARGV;
     
     unless(defined $filename)
     {
       warn "reading archive from standard in";
     }
     
     my $r;
     
     my $flags = ARCHIVE_EXTRACT_TIME
               | ARCHIVE_EXTRACT_PERM
               | ARCHIVE_EXTRACT_ACL
               | ARCHIVE_EXTRACT_FFLAGS;
     
     my $a = archive_read_new();
     archive_read_support_filter_all($a);
     archive_read_support_format_all($a);
     my $ext = archive_write_disk_new();
     archive_write_disk_set_options($ext, $flags);
     archive_write_disk_set_standard_lookup($ext);
     
     $r = archive_read_open_filename($a, $filename, 10240);
     if($r != ARCHIVE_OK)
     {
       die "error opening $filename: ", archive_error_string($a);
     }
     
     while(1)
     {
       $r = archive_read_next_header($a, my $entry);
       if($r == ARCHIVE_EOF)
       {
         last;
       }
       if($r != ARCHIVE_OK)
       {
         print archive_error_string($a), "\n";
       }
       if($r < ARCHIVE_WARN)
       {
         exit 1;
       }
       $r = archive_write_header($ext, $entry);
       if($r != ARCHIVE_OK)
       {
         print archive_error_string($ext), "\n";
       }
       elsif(archive_entry_size($entry) > 0)
       {
         copy_data($a, $ext);
       }
     }
     
     archive_read_close($a);
     archive_read_free($a);
     archive_write_close($ext);
     archive_write_free($ext);
     
     sub copy_data
     {
       my($ar, $aw) = @_;
       my $r;
       while(1)
       {
         $r = archive_read_data_block($ar, my $buff, my $offset);
         if($r == ARCHIVE_EOF)
         {
           return;
         }
         if($r != ARCHIVE_OK)
         {
           die archive_error_string($ar), "\n";
         }
         $r = archive_write_data_block($aw, $buff, $offset);
         if($r != ARCHIVE_OK)
         {
           die archive_error_string($aw), "\n";
         }
       }
     }

 Unicode

    Libarchive deals with two types of string like data. Pathnames, user
    and group names are proper strings and are encoded in the codeset for
    the current POSIX locale. Content data for files stored and retrieved
    from in raw bytes.

    The usual operational procedure in Perl is to convert everything on
    input into UTF-8, operate on the UTF-8 data and then convert (if
    necessary) everything on output to the desired output format.

    In order to get useful string data out of libarchive, this module
    translates its input/output using the codeset for the current POSIX
    locale. So you must be using a POSIX locale that supports the
    characters in the pathnames of the archives you are going to process,
    and it is highly recommend that you use a UTF-8 locale, which should
    cover everything.

     use strict;
     use warnings;
     use utf8;
     use Archive::Libarchive::FFI qw( :all );
     use POSIX qw( setlocale LC_ALL );
     
     # substitute en_US.utf8 for the correct UTF-8 locale for your region.
     setlocale(LC_ALL, "en_US.utf8"); # or 'export LANG=en_US.utf8' from your shell.
     
     my $entry = archive_entry_new();
     
     archive_entry_set_pathname($entry, "привет.txt");
     my $string = archive_entry_pathname($entry); # "привет.txt"
     
     archive_entry_free($entry);

    If you try to pass a string with characters unsupported by your current
    locale, the behavior is undefined. If you try to retrieve strings with
    characters unsupported by your current locale you will get undef.

    Unfortunately locale names are not portable across systems, so you
    should probably not hard code the locale as shown here unless you know
    the correct locale name for all the platforms that your script will
    run.

    There are two Perl only functions that give information about the
    current codeset as understood by libarchive. archive_perl_utf8_mode if
    the currently selected codeset is UTF-8.

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     die "must use UTF-8 locale" unless archive_perl_utf8_mode();

    archive_perl_codeset returns the currently selected codeset.

     use strict;
     use warnings;
     use Archive::Libarchive::FFI qw( :all );
     
     my $entry = archive_entry_new();
     
     if(archive_perl_codeset() =~ /^(ISO-8859-5|CP1251|KOI8-R|UTF-8)$/)
     {
       archive_entry_set_pathname($entry, "привет.txt");
       my $string = archive_entry_pathname($entry); # "привет.txt"
     }
     else
     {
       archive_entry_set_pathname($entry, "privet.txt");
       my $string = archive_entry_pathname($entry); # "privet.txt"
     }

    Because libarchive reads and writes file content within an archive
    using raw bytes, if your file content has non ASCII characters in it,
    then you need to encode them

     use Encode qw( encode );
     
     archive_write_data($archive, encode('UTF-8', "привет.txt");
     # or
     archive_write_data($archive, encode('KOI8-R', "привет.txt");

    read:

     use Encode qw( decode );
     
     my $raw;
     archive_read_data($archive, $raw, 10240);
     my $decoded_content = decode('UTF-8', $raw);
     # or
     my $decoded_content = decode('KOI8-R', $raw);

SUPPORT

    If you find bugs, please open an issue on the project GitHub
    repository:

    https://github.com/plicease/Archive-Libarchive-FFI/issues?state=open

    If you have a fix, please open a pull request. You can see the
    CONTRIBUTING file for traps, hints and pitfalls.

CAVEATS

    Archive and entry objects are really pointers to opaque C structures
    and need to be freed using one of archive_read_free, archive_write_free
    or archive_entry_free, in order to free the resources associated with
    those objects.

    Proper Unicode (or non-ASCII character support) depends on setting the
    correct POSIX locale, which is system dependent.

    The documentation that comes with libarchive is not that great (by its
    own admission), being somewhat incomplete, and containing a few subtle
    errors. In writing the documentation for this distribution, I borrowed
    heavily (read: stole wholesale) from the libarchive documentation,
    making changes where appropriate for use under Perl (changing NULL to
    undef for example, along with the interface change to make that work).
    I may and probably have introduced additional subtle errors. Patches to
    the documentation that match the implementation, or fixes to the
    implementation so that it matches the documentation (which ever is
    appropriate) would greatly appreciated.

SEE ALSO

    The intent of this module is to provide a low level fairly thin direct
    interface to libarchive, on which a more Perlish OO layer could easily
    be written.

    Archive::Libarchive::XS

    Archive::Libarchive::FFI

      Both of these provide the same API to libarchive but the bindings are
      implemented in XS for one and via FFI::Raw for the other.

    Archive::Libarchive::Any

      Offers whichever is available, either the XS or FFI version. The
      actual algorithm as to which is picked is subject to change,
      depending on with version seems to be the most reliable.

    Archive::Peek::Libarchive

    Archive::Extract::Libarchive

      Both of these provide a higher level, less complete perlish interface
      to libarchive.

    Archive::Tar

    Archive::Tar::Wrapper

      Just some of the many modules on CPAN that will read/write tar
      archives.

    Archive::Zip

      Just one of the many modules on CPAN that will read/write zip
      archives.

    Archive::Any

      A module attempts to read/write multiple formats using different
      methods depending on what perl modules are installed, and preferring
      pure perl modules.

AUTHOR

    Graham Ollis <plicease@cpan.org>

COPYRIGHT AND LICENSE

    This software is copyright (c) 2013 by Graham Ollis.

    This is free software; you can redistribute it and/or modify it under
    the same terms as the Perl 5 programming language system itself.