OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 19:51:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/python-lxml-4.1.1-2.fc27.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/python-lxml.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.0 MB/s | 943 kB 00:03 ETA Local RPMS 15% [=== ] 3.0 MB/s | 1.8 MB 00:03 ETA Local RPMS 24% [====- ] 3.1 MB/s | 2.8 MB 00:02 ETA Local RPMS 33% [======- ] 3.1 MB/s | 3.8 MB 00:02 ETA Local RPMS 42% [======== ] 3.1 MB/s | 4.8 MB 00:02 ETA Local RPMS 50% [========== ] 3.1 MB/s | 5.8 MB 00:01 ETA Local RPMS 59% [===========- ] 2.9 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 2.9 MB/s | 7.7 MB 00:01 ETA Local RPMS 76% [=============== ] 2.9 MB/s | 8.7 MB 00:00 ETA Local RPMS 84% [================- ] 3.0 MB/s | 9.7 MB 00:00 ETA Local RPMS 93% [==================- ] 3.0 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:27 ago on Wed Feb 21 19:51:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libxml2-devel riscv64 2.9.3-4.fc28 local 1.1 M libxslt-devel riscv64 1.1.28-13.fc28 local 313 k python2-Cython riscv64 0.27.3-2.fc28 local 5.7 M python2-devel riscv64 2.7.14-9.fc28 local 410 k python2-setuptools noarch 38.4.0-3.fc28 local 622 k python3-Cython riscv64 0.27.3-2.fc28 local 6.6 M python3-devel riscv64 3.6.4-14.0.fc28 local 862 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k Installing dependencies: dwz riscv64 0.12-5.fc28 local 108 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libgcrypt-devel riscv64 1.8.2-1.fc27 local 168 k libgpg-error-devel riscv64 1.27-3.fc27 local 44 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k libxslt riscv64 1.1.28-13.fc28 local 506 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M python2-rpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-rpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k unzip riscv64 6.0-36.fc28 local 398 k xz-devel riscv64 5.2.3-5.fc28 local 60 k zip riscv64 3.0-20.fc28 local 271 k zlib-devel riscv64 1.2.11-4.fc28 local 56 k Transaction Summary ================================================================================ Install 39 Packages Total download size: 26 M Installed size: 113 M Downloading Packages: (1/39): python2-Cyth 0% [ ] --- B/s | 0 B --:-- ETA (1-3/39): python2-Cy 2% [- ] 2.5 MB/s | 783 kB 00:10 ETA (1-3/39): python2-Cy 6% [= ] 2.5 MB/s | 1.7 MB 00:09 ETA (1/39): python2-setuptools-38.4.0-3.fc28.noarch 866 kB/s | 622 kB 00:00 (2-3/39): python3-Cy 6% [= ] 2.5 MB/s | 1.8 MB 00:09 ETA (2-4/39): python2-Cy 9% [=- ] 2.5 MB/s | 2.6 MB 00:09 ETA (2-4/39): python3-Cy 13% [==- ] 2.5 MB/s | 3.5 MB 00:08 ETA (2/39): python3-setuptools-38.4.0-3.fc28.noarch 876 kB/s | 620 kB 00:00 (3-4/39): python2-Cy 13% [==- ] 2.5 MB/s | 3.6 MB 00:09 ETA (3-5/39): python3-Cy 16% [=== ] 2.5 MB/s | 4.4 MB 00:08 ETA (3-5/39): python3-Cy 20% [==== ] 2.5 MB/s | 5.4 MB 00:08 ETA (3-5/39): libxml2-de 23% [====- ] 2.6 MB/s | 6.3 MB 00:07 ETA (3/39): libxml2-devel-2.9.3-4.fc28.riscv64.rpm 902 kB/s | 1.1 MB 00:01 (4-5/39): python3-Cy 25% [===== ] 2.5 MB/s | 6.8 MB 00:07 ETA (4-6/39): libxslt-de 29% [=====- ] 2.5 MB/s | 7.7 MB 00:07 ETA (4/39): libxslt-devel-1.1.28-13.fc28.riscv64.rp 906 kB/s | 313 kB 00:00 (5-6/39): python3-Cy 29% [=====- ] 2.5 MB/s | 7.8 MB 00:07 ETA (5-7/39): python2-Cy 32% [======- ] 2.5 MB/s | 8.6 MB 00:07 ETA (5/39): libxslt-1.1.28-13.fc28.riscv64.rpm 888 kB/s | 506 kB 00:00 (6-7/39): python2-Cy 35% [======= ] 2.5 MB/s | 9.3 MB 00:06 ETA (6-8/39): python2-Cy 38% [=======- ] 2.5 MB/s | 10 MB 00:06 ETA (6/39): python2-devel-2.7.14-9.fc28.riscv64.rpm 881 kB/s | 410 kB 00:00 (7-8/39): python2-Cy 39% [=======- ] 2.5 MB/s | 10 MB 00:06 ETA (7/39): python2-2.7.14-9.fc28.riscv64.rpm 775 kB/s | 107 kB 00:00 (8-9/39): python3-Cy 41% [======== ] 2.5 MB/s | 11 MB 00:06 ETA (8-10/39): python3-C 44% [========- ] 2.5 MB/s | 12 MB 00:05 ETA (8-10/39): python3-C 47% [=========- ] 2.5 MB/s | 13 MB 00:05 ETA (8-10/39): python3-C 51% [========== ] 2.6 MB/s | 13 MB 00:04 ETA (8-10/39): python2-l 54% [==========- ] 2.6 MB/s | 14 MB 00:04 ETA (8-10/39): python2-l 57% [===========- ] 2.6 MB/s | 15 MB 00:04 ETA (8-10/39): python2-l 61% [============ ] 2.6 MB/s | 16 MB 00:03 ETA (8-10/39): python2-C 64% [============- ] 2.7 MB/s | 17 MB 00:03 ETA (8/39): python2-Cython-0.27.3-2.fc28.riscv64.rp 817 kB/s | 5.7 MB 00:07 (9-10/39): python2-l 65% [============= ] 2.3 MB/s | 17 MB 00:04 ETA (9-11/39): python2-l 68% [=============- ] 2.3 MB/s | 18 MB 00:03 ETA (9-11/39): python2-l 71% [============== ] 2.4 MB/s | 19 MB 00:03 ETA (9/39): python3-devel-3.6.4-14.0.fc28.riscv64.r 918 kB/s | 862 kB 00:00 (10-11/39): python3- 74% [==============- ] 2.3 MB/s | 20 MB 00:02 ETA (10/39): python3-Cython-0.27.3-2.fc28.riscv64.r 756 kB/s | 6.6 MB 00:08 (11-12/39): libgcryp 74% [==============- ] 2.0 MB/s | 20 MB 00:03 ETA (11/39): libgpg-error-devel-1.27-3.fc27.riscv64 739 kB/s | 44 kB 00:00 (12-13/39): libgcryp 75% [=============== ] 2.0 MB/s | 20 MB 00:03 ETA (12/39): xz-devel-5.2.3-5.fc28.riscv64.rpm 788 kB/s | 60 kB 00:00 (13-14/39): libgcryp 75% [=============== ] 2.0 MB/s | 20 MB 00:03 ETA (13/39): libgcrypt-devel-1.8.2-1.fc27.riscv64.r 157 kB/s | 168 kB 00:01 (14-15/39): zlib-dev 76% [=============== ] 2.0 MB/s | 20 MB 00:03 ETA (14/39): zlib-devel-1.2.11-4.fc28.riscv64.rpm 406 kB/s | 56 kB 00:00 (15-16/39): python2- 76% [=============== ] 1.9 MB/s | 20 MB 00:03 ETA (15/39): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 271 kB/s | 14 kB 00:00 (16/39): python2-lib 76% [=============== ] 1.9 MB/s | 20 MB 00:03 ETA (16/39): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 342 kB/s | 15 kB 00:00 (17-18/39): python2- 76% [=============== ] 1.9 MB/s | 20 MB 00:03 ETA (17/39): pkgconf-1.4.1-1.fc27.riscv64.rpm 362 kB/s | 35 kB 00:00 (18-19/39): python2- 77% [=============== ] 1.9 MB/s | 20 MB 00:03 ETA (18/39): python-rpm-macros-3-26.fc28.noarch.rpm 416 kB/s | 11 kB 00:00 (19-20/39): python2- 77% [=============== ] 1.9 MB/s | 20 MB 00:03 ETA (19/39): libpkgconf-1.4.1-1.fc27.riscv64.rpm 419 kB/s | 74 kB 00:00 (20-21/39): python2- 77% [===============- ] 1.9 MB/s | 20 MB 00:03 ETA (20/39): python3-rpm-generators-5-1.fc28.noarch 311 kB/s | 23 kB 00:00 (21/39): python2-lib 77% [===============- ] 1.9 MB/s | 20 MB 00:03 ETA (21/39): python3-rpm-macros-3-26.fc28.noarch.rp 205 kB/s | 10 kB 00:00 (22-23/39): python2- 77% [===============- ] 1.9 MB/s | 20 MB 00:03 ETA (22/39): nim-srpm-macros-1-1.fc28.noarch.rpm 309 kB/s | 7.6 kB 00:00 (23-24/39): python2- 77% [===============- ] 1.9 MB/s | 21 MB 00:03 ETA (23/39): ocaml-srpm-macros-5-2.fc27.noarch.rpm 263 kB/s | 7.8 kB 00:00 (24-25/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (24/39): openblas-srpm-macros-2-2.fc27.noarch.r 267 kB/s | 6.6 kB 00:00 (25-26/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (25/39): redhat-rpm-config-96-1.fc28.0.riscv64. 307 kB/s | 75 kB 00:00 (26-27/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (26/39): qt5-srpm-macros-5.10.0-1.fc28.noarch.r 178 kB/s | 9.0 kB 00:00 (27/39): python2-lib 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (27/39): rust-srpm-macros-5-1.fc28.noarch.rpm 176 kB/s | 8.0 kB 00:00 (28-29/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (28/39): python2-rpm-macros-3-26.fc28.noarch.rp 362 kB/s | 10 kB 00:00 (29-30/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (29/39): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 248 kB/s | 7.5 kB 00:00 (30-31/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (30/39): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 319 kB/s | 8.2 kB 00:00 (31-32/39): python2- 78% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (31/39): gnat-srpm-macros-4-5.fc28.noarch.rpm 342 kB/s | 8.8 kB 00:00 (32-33/39): python2- 79% [===============- ] 1.8 MB/s | 21 MB 00:03 ETA (32/39): file-5.32-3.fc28.riscv64.rpm 270 kB/s | 81 kB 00:00 (33-34/39): python2- 79% [===============- ] 1.7 MB/s | 21 MB 00:03 ETA (33/39): go-srpm-macros-2-11.fc28.noarch.rpm 149 kB/s | 8.4 kB 00:00 (34/39): python2-lib 79% [===============- ] 1.7 MB/s | 21 MB 00:03 ETA (34/39): perl-srpm-macros-1-26.fc28.noarch.rpm 220 kB/s | 9.7 kB 00:00 (35-36/39): python-s 79% [===============- ] 1.7 MB/s | 21 MB 00:03 ETA (35/39): python-srpm-macros-3-26.fc28.noarch.rp 241 kB/s | 10 kB 00:00 (36/39): python2-lib 79% [===============- ] 1.7 MB/s | 21 MB 00:03 ETA (36/39): dwz-0.12-5.fc28.riscv64.rpm 692 kB/s | 108 kB 00:00 (37-38/39): zip-3.0- 80% [================ ] 1.7 MB/s | 21 MB 00:02 ETA (37/39): zip-3.0-20.fc28.riscv64.rpm 747 kB/s | 271 kB 00:00 (38-39/39): unzip-6. 82% [================ ] 1.7 MB/s | 22 MB 00:02 ETA (38/39): unzip-6.0-36.fc28.riscv64.rpm 968 kB/s | 398 kB 00:00 (39/39): python2-lib 84% [================- ] 1.8 MB/s | 22 MB 00:02 ETA (39/39): python2-lib 87% [================= ] 1.8 MB/s | 23 MB 00:01 ETA (39/39): python2-lib 90% [================== ] 1.9 MB/s | 24 MB 00:01 ETA (39/39): python2-lib 93% [==================- ] 1.9 MB/s | 25 MB 00:00 ETA (39/39): python2-lib 96% [=================== ] 2.0 MB/s | 25 MB 00:00 ETA (39/39): python2-lib 99% [===================-] 2.0 MB/s | 26 MB 00:00 ETA (39/39): python2-libs-2.7.14-9.fc28.riscv64.rpm 918 kB/s | 8.1 MB 00:09 -------------------------------------------------------------------------------- Total 1.9 MB/s | 26 MB 00:13 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : python2-libs-2.7.14-9.fc [ ] 1/39 Installing : python2-libs-2.7.14-9.fc [= ] 1/39 Installing : python2-libs-2.7.14-9.fc [== ] 1/39 Installing : python2-libs-2.7.14-9.fc [=== ] 1/39 Installing : python2-libs-2.7.14-9.fc [==== ] 1/39 Installing : python2-libs-2.7.14-9.fc [===== ] 1/39 Installing : python2-libs-2.7.14-9.fc [====== ] 1/39 Installing : python2-libs-2.7.14-9.fc [======= ] 1/39 Installing : python2-libs-2.7.14-9.fc [======== ] 1/39 Installing : python2-libs-2.7.14-9.fc [========= ] 1/39random: crng init done Installing : python2-libs-2.7.14-9.fc [========== ] 1/39 Installing : python2-libs-2.7.14-9.fc [=========== ] 1/39 Installing : python2-libs-2.7.14-9.fc [============ ] 1/39 Installing : python2-libs-2.7.14-9.fc [============= ] 1/39 Installing : python2-libs-2.7.14-9.fc [============== ] 1/39 Installing : python2-libs-2.7.14-9.fc [=============== ] 1/39 Installing : python2-libs-2.7.14-9.fc [================ ] 1/39 Installing : python2-libs-2.7.14-9.fc [================= ] 1/39 Installing : python2-libs-2.7.14-9.fc [================== ] 1/39 Installing : python2-libs-2.7.14-9.fc [=================== ] 1/39 Installing : python2-libs-2.7.14-9.fc [==================== ] 1/39 Installing : python2-libs-2.7.14-9.fc [===================== ] 1/39 Installing : python2-libs-2.7.14-9.fc [====================== ] 1/39 Installing : python2-libs-2.7.14-9.fc [======================= ] 1/39 Installing : python2-libs-2.7.14-9.fc [======================== ] 1/39 Installing : python2-libs-2.7.14-9.fc28.riscv64 1/39 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 1/39 Installing : python2-2.7.14-9.fc28.ri [ ] 2/39 Installing : python2-2.7.14-9.fc28.ri [====== ] 2/39 Installing : python2-2.7.14-9.fc28.ri [============== ] 2/39 Installing : python2-2.7.14-9.fc28.ri [==================== ] 2/39 Installing : python2-2.7.14-9.fc28.ri [======================= ] 2/39 Installing : python2-2.7.14-9.fc28.ri [======================== ] 2/39 Installing : python2-2.7.14-9.fc28.riscv64 2/39 Installing : python-srpm-macros-3-26. [ ] 3/39 Installing : python-srpm-macros-3-26. [======================= ] 3/39 Installing : python-srpm-macros-3-26.fc28.noarch 3/39 Installing : python-rpm-macros-3-26.f [ ] 4/39 Installing : python-rpm-macros-3-26.f [======================= ] 4/39 Installing : python-rpm-macros-3-26.fc28.noarch 4/39 Installing : unzip-6.0-36.fc28.riscv6 [ ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [= ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 5/39 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 5/39 Installing : unzip-6.0-36.fc28.riscv64 5/39 Installing : zip-3.0-20.fc28.riscv64 [ ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [=== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [==== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [===== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [====== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [======= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [======== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [========= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [========== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [============ ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [============= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [============== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [================ ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [================= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [================== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 6/39 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 6/39 Installing : zip-3.0-20.fc28.riscv64 6/39 Installing : dwz-0.12-5.fc28.riscv64 [ ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 7/39 Installing : dwz-0.12-5.fc28.riscv64 7/39 Installing : perl-srpm-macros-1-26.fc [ ] 8/39 Installing : perl-srpm-macros-1-26.fc [====================== ] 8/39 Installing : perl-srpm-macros-1-26.fc28.noarch 8/39 Installing : go-srpm-macros-2-11.fc28 [ ] 9/39 Installing : go-srpm-macros-2-11.fc28 [====================== ] 9/39 Installing : go-srpm-macros-2-11.fc28.noarch 9/39 Installing : gnat-srpm-macros-4-5.fc2 [ ] 10/39 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 10/39 Installing : gnat-srpm-macros-4-5.fc28.noarch 10/39 Installing : ghc-srpm-macros-1.4.2-7. [ ] 11/39 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 11/39 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 11/39 Installing : fpc-srpm-macros-1.1-4.fc [ ] 12/39 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 12/39 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 12/39 Installing : python2-rpm-macros-3-26. [ ] 13/39 Installing : python2-rpm-macros-3-26. [======================= ] 13/39 Installing : python2-rpm-macros-3-26.fc28.noarch 13/39 Installing : file-5.32-3.fc28.riscv64 [ ] 14/39 Installing : file-5.32-3.fc28.riscv64 [====== ] 14/39 Installing : file-5.32-3.fc28.riscv64 [=========== ] 14/39 Installing : file-5.32-3.fc28.riscv64 [================== ] 14/39 Installing : file-5.32-3.fc28.riscv64 [===================== ] 14/39 Installing : file-5.32-3.fc28.riscv64 [====================== ] 14/39 Installing : file-5.32-3.fc28.riscv64 [======================= ] 14/39 Installing : file-5.32-3.fc28.riscv64 [======================== ] 14/39 Installing : file-5.32-3.fc28.riscv64 14/39 Installing : rust-srpm-macros-5-1.fc2 [ ] 15/39 Installing : rust-srpm-macros-5-1.fc2 [=== ] 15/39 Installing : rust-srpm-macros-5-1.fc2 [===== ] 15/39 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 15/39 Installing : rust-srpm-macros-5-1.fc28.noarch 15/39 Installing : qt5-srpm-macros-5.10.0-1 [ ] 16/39 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 16/39 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 16/39 Installing : openblas-srpm-macros-2-2 [ ] 17/39 Installing : openblas-srpm-macros-2-2 [================ ] 17/39 Installing : openblas-srpm-macros-2-2.fc27.noarch 17/39 Installing : ocaml-srpm-macros-5-2.fc [ ] 18/39 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 18/39 Installing : ocaml-srpm-macros-5-2.fc27.noarch 18/39 Installing : nim-srpm-macros-1-1.fc28 [ ] 19/39 Installing : nim-srpm-macros-1-1.fc28 [=== ] 19/39 Installing : nim-srpm-macros-1-1.fc28 [===== ] 19/39 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 19/39 Installing : nim-srpm-macros-1-1.fc28.noarch 19/39 Installing : redhat-rpm-config-96-1.f [ ] 20/39 Installing : redhat-rpm-config-96-1.f [== ] 20/39 Installing : redhat-rpm-config-96-1.f [=== ] 20/39 Installing : redhat-rpm-config-96-1.f [========= ] 20/39 Installing : redhat-rpm-config-96-1.f [=========== ] 20/39 Installing : redhat-rpm-config-96-1.f [================= ] 20/39 Installing : redhat-rpm-config-96-1.f [================== ] 20/39 Installing : redhat-rpm-config-96-1.f [=================== ] 20/39 Installing : redhat-rpm-config-96-1.f [===================== ] 20/39 Installing : redhat-rpm-config-96-1.f [====================== ] 20/39 Installing : redhat-rpm-config-96-1.f [======================== ] 20/39 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 20/39 Installing : python3-rpm-macros-3-26. [ ] 21/39 Installing : python3-rpm-macros-3-26. [======================= ] 21/39 Installing : python3-rpm-macros-3-26.fc28.noarch 21/39 Installing : libpkgconf-1.4.1-1.fc27. [ ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 22/39 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 22/39 Installing : libpkgconf-1.4.1-1.fc27.riscv64 22/39 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 22/39 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 23/39 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 23/39 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 23/39 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 23/39 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 23/39 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 23/39 Installing : pkgconf-1.4.1-1.fc27.riscv64 23/39 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 24/39 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 24/39 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 24/39 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 24/39 Installing : pkgconf-pkg-config-1.4.1 [ ] 25/39 Installing : pkgconf-pkg-config-1.4.1 [==== ] 25/39 Installing : pkgconf-pkg-config-1.4.1 [===== ] 25/39 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 25/39 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 25/39 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 25/39 Installing : xz-devel-5.2.3-5.fc28.ri [ ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [= ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [==== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [======= ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [========== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [============ ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [============= ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [=============== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [================ ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [================== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [=================== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [==================== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [===================== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [====================== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [======================= ] 26/39 Installing : xz-devel-5.2.3-5.fc28.ri [======================== ] 26/39 Installing : xz-devel-5.2.3-5.fc28.riscv64 26/39 Installing : zlib-devel-1.2.11-4.fc28 [ ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [== ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [======== ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [============= ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [=================== ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [==================== ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [======================= ] 27/39 Installing : zlib-devel-1.2.11-4.fc28 [======================== ] 27/39 Installing : zlib-devel-1.2.11-4.fc28.riscv64 27/39 Installing : libxml2-devel-2.9.3-4.fc [ ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [= ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [=== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [==== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [===== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [====== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [======= ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [======== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [========= ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [========== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [=========== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [============ ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [============= ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [============== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [=============== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [================ ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [================= ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [================== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [=================== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [==================== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [===================== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [====================== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [======================= ] 28/39 Installing : libxml2-devel-2.9.3-4.fc [======================== ] 28/39 Installing : libxml2-devel-2.9.3-4.fc28.riscv64 28/39 Installing : libgpg-error-devel-1.27- [ ] 29/39 Installing : libgpg-error-devel-1.27- [====== ] 29/39 Installing : libgpg-error-devel-1.27- [========== ] 29/39 Installing : libgpg-error-devel-1.27- [================ ] 29/39 Installing : libgpg-error-devel-1.27- [==================== ] 29/39 Installing : libgpg-error-devel-1.27- [===================== ] 29/39 Installing : libgpg-error-devel-1.27- [======================== ] 29/39 Installing : libgpg-error-devel-1.27-3.fc27.riscv64 29/39 Running scriptlet: libgpg-error-devel-1.27-3.fc27.riscv64 29/39 Installing : libgcrypt-devel-1.8.2-1. [ ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [=== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [===== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [====== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [======= ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [========= ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [=========== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [============== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [================ ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [================= ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [=================== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [====================== ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [======================= ] 30/39 Installing : libgcrypt-devel-1.8.2-1. [======================== ] 30/39 Installing : libgcrypt-devel-1.8.2-1.fc27.riscv64 30/39 Running scriptlet: libgcrypt-devel-1.8.2-1.fc27.riscv64 30/39 Installing : libxslt-1.1.28-13.fc28.r [ ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [= ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [=== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [==== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [===== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [====== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [======= ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [======== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [========= ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [========== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [=========== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [============ ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [============= ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [============== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [=============== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [================ ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [================= ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [================== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [=================== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [==================== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [===================== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [====================== ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [======================= ] 31/39 Installing : libxslt-1.1.28-13.fc28.r [======================== ] 31/39 Installing : libxslt-1.1.28-13.fc28.riscv64 31/39 Running scriptlet: libxslt-1.1.28-13.fc28.riscv64 31/39 Installing : python3-setuptools-38.4. [ ] 32/39 Installing : python3-setuptools-38.4. [= ] 32/39 Installing : python3-setuptools-38.4. [== ] 32/39 Installing : python3-setuptools-38.4. [=== ] 32/39 Installing : python3-setuptools-38.4. [==== ] 32/39 Installing : python3-setuptools-38.4. [===== ] 32/39 Installing : python3-setuptools-38.4. [====== ] 32/39 Installing : python3-setuptools-38.4. [======= ] 32/39 Installing : python3-setuptools-38.4. [======== ] 32/39 Installing : python3-setuptools-38.4. [========= ] 32/39 Installing : python3-setuptools-38.4. [========== ] 32/39 Installing : python3-setuptools-38.4. [=========== ] 32/39 Installing : python3-setuptools-38.4. [============ ] 32/39 Installing : python3-setuptools-38.4. [============= ] 32/39 Installing : python3-setuptools-38.4. [============== ] 32/39 Installing : python3-setuptools-38.4. [=============== ] 32/39 Installing : python3-setuptools-38.4. [================ ] 32/39 Installing : python3-setuptools-38.4. [================= ] 32/39 Installing : python3-setuptools-38.4. [================== ] 32/39 Installing : python3-setuptools-38.4. [=================== ] 32/39 Installing : python3-setuptools-38.4. [==================== ] 32/39 Installing : python3-setuptools-38.4. [===================== ] 32/39 Installing : python3-setuptools-38.4. [====================== ] 32/39 Installing : python3-setuptools-38.4. [======================= ] 32/39 Installing : python3-setuptools-38.4. [======================== ] 32/39 Installing : python3-setuptools-38.4.0-3.fc28.noarch 32/39 Installing : python3-rpm-generators-5 [ ] 33/39 Installing : python3-rpm-generators-5 [===== ] 33/39 Installing : python3-rpm-generators-5 [=================== ] 33/39 Installing : python3-rpm-generators-5 [======================== ] 33/39 Installing : python3-rpm-generators-5-1.fc28.noarch 33/39 Installing : python2-devel-2.7.14-9.f [ ] 34/39 Installing : python2-devel-2.7.14-9.f [= ] 34/39 Installing : python2-devel-2.7.14-9.f [== ] 34/39 Installing : python2-devel-2.7.14-9.f [=== ] 34/39 Installing : python2-devel-2.7.14-9.f [==== ] 34/39 Installing : python2-devel-2.7.14-9.f [===== ] 34/39 Installing : python2-devel-2.7.14-9.f [====== ] 34/39 Installing : python2-devel-2.7.14-9.f [======= ] 34/39 Installing : python2-devel-2.7.14-9.f [======== ] 34/39 Installing : python2-devel-2.7.14-9.f [========= ] 34/39 Installing : python2-devel-2.7.14-9.f [========== ] 34/39 Installing : python2-devel-2.7.14-9.f [=========== ] 34/39 Installing : python2-devel-2.7.14-9.f [============ ] 34/39 Installing : python2-devel-2.7.14-9.f [============= ] 34/39 Installing : python2-devel-2.7.14-9.f [============== ] 34/39 Installing : python2-devel-2.7.14-9.f [=============== ] 34/39 Installing : python2-devel-2.7.14-9.f [================ ] 34/39 Installing : python2-devel-2.7.14-9.f [================= ] 34/39 Installing : python2-devel-2.7.14-9.f [================== ] 34/39 Installing : python2-devel-2.7.14-9.f [=================== ] 34/39 Installing : python2-devel-2.7.14-9.f [==================== ] 34/39 Installing : python2-devel-2.7.14-9.f [===================== ] 34/39 Installing : python2-devel-2.7.14-9.f [====================== ] 34/39 Installing : python2-devel-2.7.14-9.f [======================= ] 34/39 Installing : python2-devel-2.7.14-9.f [======================== ] 34/39 Installing : python2-devel-2.7.14-9.fc28.riscv64 34/39 Installing : python3-devel-3.6.4-14.0 [ ] 35/39 Installing : python3-devel-3.6.4-14.0 [= ] 35/39 Installing : python3-devel-3.6.4-14.0 [== ] 35/39 Installing : python3-devel-3.6.4-14.0 [=== ] 35/39 Installing : python3-devel-3.6.4-14.0 [==== ] 35/39 Installing : python3-devel-3.6.4-14.0 [===== ] 35/39 Installing : python3-devel-3.6.4-14.0 [====== ] 35/39 Installing : python3-devel-3.6.4-14.0 [======= ] 35/39 Installing : python3-devel-3.6.4-14.0 [======== ] 35/39 Installing : python3-devel-3.6.4-14.0 [========= ] 35/39 Installing : python3-devel-3.6.4-14.0 [========== ] 35/39 Installing : python3-devel-3.6.4-14.0 [=========== ] 35/39 Installing : python3-devel-3.6.4-14.0 [============ ] 35/39 Installing : python3-devel-3.6.4-14.0 [============= ] 35/39 Installing : python3-devel-3.6.4-14.0 [============== ] 35/39 Installing : python3-devel-3.6.4-14.0 [=============== ] 35/39 Installing : python3-devel-3.6.4-14.0 [================ ] 35/39 Installing : python3-devel-3.6.4-14.0 [================= ] 35/39 Installing : python3-devel-3.6.4-14.0 [================== ] 35/39 Installing : python3-devel-3.6.4-14.0 [=================== ] 35/39 Installing : python3-devel-3.6.4-14.0 [==================== ] 35/39 Installing : python3-devel-3.6.4-14.0 [===================== ] 35/39 Installing : python3-devel-3.6.4-14.0 [====================== ] 35/39 Installing : python3-devel-3.6.4-14.0 [======================= ] 35/39 Installing : python3-devel-3.6.4-14.0 [======================== ] 35/39 Installing : python3-devel-3.6.4-14.0.fc28.riscv64 35/39 Installing : libxslt-devel-1.1.28-13. [ ] 36/39 Installing : libxslt-devel-1.1.28-13. [= ] 36/39 Installing : libxslt-devel-1.1.28-13. [== ] 36/39 Installing : libxslt-devel-1.1.28-13. [=== ] 36/39 Installing : libxslt-devel-1.1.28-13. [==== ] 36/39 Installing : libxslt-devel-1.1.28-13. [===== ] 36/39 Installing : libxslt-devel-1.1.28-13. [====== ] 36/39 Installing : libxslt-devel-1.1.28-13. [======= ] 36/39 Installing : libxslt-devel-1.1.28-13. [======== ] 36/39 Installing : libxslt-devel-1.1.28-13. [========= ] 36/39 Installing : libxslt-devel-1.1.28-13. [========== ] 36/39 Installing : libxslt-devel-1.1.28-13. [=========== ] 36/39 Installing : libxslt-devel-1.1.28-13. [============ ] 36/39 Installing : libxslt-devel-1.1.28-13. [============= ] 36/39 Installing : libxslt-devel-1.1.28-13. [============== ] 36/39 Installing : libxslt-devel-1.1.28-13. [=============== ] 36/39 Installing : libxslt-devel-1.1.28-13. [================ ] 36/39 Installing : libxslt-devel-1.1.28-13. [================= ] 36/39 Installing : libxslt-devel-1.1.28-13. [================== ] 36/39 Installing : libxslt-devel-1.1.28-13. [=================== ] 36/39 Installing : libxslt-devel-1.1.28-13. [==================== ] 36/39 Installing : libxslt-devel-1.1.28-13. [===================== ] 36/39 Installing : libxslt-devel-1.1.28-13. [====================== ] 36/39 Installing : libxslt-devel-1.1.28-13. [======================= ] 36/39 Installing : libxslt-devel-1.1.28-13. [======================== ] 36/39 Installing : libxslt-devel-1.1.28-13.fc28.riscv64 36/39 Installing : python2-Cython-0.27.3-2. [ ] 37/39 Installing : python2-Cython-0.27.3-2. [= ] 37/39 Installing : python2-Cython-0.27.3-2. [== ] 37/39 Installing : python2-Cython-0.27.3-2. [=== ] 37/39 Installing : python2-Cython-0.27.3-2. [==== ] 37/39 Installing : python2-Cython-0.27.3-2. [===== ] 37/39 Installing : python2-Cython-0.27.3-2. [====== ] 37/39 Installing : python2-Cython-0.27.3-2. [======= ] 37/39 Installing : python2-Cython-0.27.3-2. [======== ] 37/39 Installing : python2-Cython-0.27.3-2. [========= ] 37/39 Installing : python2-Cython-0.27.3-2. [========== ] 37/39 Installing : python2-Cython-0.27.3-2. [=========== ] 37/39 Installing : python2-Cython-0.27.3-2. [============ ] 37/39 Installing : python2-Cython-0.27.3-2. [============= ] 37/39 Installing : python2-Cython-0.27.3-2. [============== ] 37/39 Installing : python2-Cython-0.27.3-2. [=============== ] 37/39 Installing : python2-Cython-0.27.3-2. [================ ] 37/39 Installing : python2-Cython-0.27.3-2. [================= ] 37/39 Installing : python2-Cython-0.27.3-2. [================== ] 37/39 Installing : python2-Cython-0.27.3-2. [=================== ] 37/39 Installing : python2-Cython-0.27.3-2. [==================== ] 37/39 Installing : python2-Cython-0.27.3-2. [===================== ] 37/39 Installing : python2-Cython-0.27.3-2. [====================== ] 37/39 Installing : python2-Cython-0.27.3-2. [======================= ] 37/39 Installing : python2-Cython-0.27.3-2. [======================== ] 37/39 Installing : python2-Cython-0.27.3-2.fc28.riscv64 37/39 Installing : python2-setuptools-38.4. [ ] 38/39 Installing : python2-setuptools-38.4. [= ] 38/39 Installing : python2-setuptools-38.4. [== ] 38/39 Installing : python2-setuptools-38.4. [=== ] 38/39 Installing : python2-setuptools-38.4. [==== ] 38/39 Installing : python2-setuptools-38.4. [===== ] 38/39 Installing : python2-setuptools-38.4. [====== ] 38/39 Installing : python2-setuptools-38.4. [======= ] 38/39 Installing : python2-setuptools-38.4. [======== ] 38/39 Installing : python2-setuptools-38.4. [========= ] 38/39 Installing : python2-setuptools-38.4. [========== ] 38/39 Installing : python2-setuptools-38.4. [=========== ] 38/39 Installing : python2-setuptools-38.4. [============ ] 38/39 Installing : python2-setuptools-38.4. [============= ] 38/39 Installing : python2-setuptools-38.4. [============== ] 38/39 Installing : python2-setuptools-38.4. [=============== ] 38/39 Installing : python2-setuptools-38.4. [================ ] 38/39 Installing : python2-setuptools-38.4. [================= ] 38/39 Installing : python2-setuptools-38.4. [================== ] 38/39 Installing : python2-setuptools-38.4. [=================== ] 38/39 Installing : python2-setuptools-38.4. [==================== ] 38/39 Installing : python2-setuptools-38.4. [===================== ] 38/39 Installing : python2-setuptools-38.4. [====================== ] 38/39 Installing : python2-setuptools-38.4. [======================= ] 38/39 Installing : python2-setuptools-38.4. [======================== ] 38/39 Installing : python2-setuptools-38.4.0-3.fc28.noarch 38/39 Installing : python3-Cython-0.27.3-2. [ ] 39/39 Installing : python3-Cython-0.27.3-2. [= ] 39/39 Installing : python3-Cython-0.27.3-2. [== ] 39/39 Installing : python3-Cython-0.27.3-2. [=== ] 39/39 Installing : python3-Cython-0.27.3-2. [==== ] 39/39 Installing : python3-Cython-0.27.3-2. [===== ] 39/39 Installing : python3-Cython-0.27.3-2. [====== ] 39/39 Installing : python3-Cython-0.27.3-2. [======= ] 39/39 Installing : python3-Cython-0.27.3-2. [======== ] 39/39 Installing : python3-Cython-0.27.3-2. [========= ] 39/39 Installing : python3-Cython-0.27.3-2. [========== ] 39/39 Installing : python3-Cython-0.27.3-2. [=========== ] 39/39 Installing : python3-Cython-0.27.3-2. [============ ] 39/39 Installing : python3-Cython-0.27.3-2. [============= ] 39/39 Installing : python3-Cython-0.27.3-2. [============== ] 39/39 Installing : python3-Cython-0.27.3-2. [=============== ] 39/39 Installing : python3-Cython-0.27.3-2. [================ ] 39/39 Installing : python3-Cython-0.27.3-2. [================= ] 39/39 Installing : python3-Cython-0.27.3-2. [================== ] 39/39 Installing : python3-Cython-0.27.3-2. [=================== ] 39/39 Installing : python3-Cython-0.27.3-2. [==================== ] 39/39 Installing : python3-Cython-0.27.3-2. [===================== ] 39/39 Installing : python3-Cython-0.27.3-2. [====================== ] 39/39 Installing : python3-Cython-0.27.3-2. [======================= ] 39/39 Installing : python3-Cython-0.27.3-2. [======================== ] 39/39 Installing : python3-Cython-0.27.3-2.fc28.riscv64 39/39 Running scriptlet: python3-Cython-0.27.3-2.fc28.riscv64 39/39 Verifying : python2-Cython-0.27.3-2.fc28.riscv64 1/39 Verifying : python2-setuptools-38.4.0-3.fc28.noarch 2/39 Verifying : python3-Cython-0.27.3-2.fc28.riscv64 3/39 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 4/39 Verifying : libxml2-devel-2.9.3-4.fc28.riscv64 5/39 Verifying : libxslt-devel-1.1.28-13.fc28.riscv64 6/39 Verifying : libxslt-1.1.28-13.fc28.riscv64 7/39 Verifying : python2-devel-2.7.14-9.fc28.riscv64 8/39 Verifying : python2-2.7.14-9.fc28.riscv64 9/39 Verifying : python2-libs-2.7.14-9.fc28.riscv64 10/39 Verifying : python3-devel-3.6.4-14.0.fc28.riscv64 11/39 Verifying : libgcrypt-devel-1.8.2-1.fc27.riscv64 12/39 Verifying : libgpg-error-devel-1.27-3.fc27.riscv64 13/39 Verifying : xz-devel-5.2.3-5.fc28.riscv64 14/39 Verifying : zlib-devel-1.2.11-4.fc28.riscv64 15/39 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 16/39 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 17/39 Verifying : pkgconf-1.4.1-1.fc27.riscv64 18/39 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 19/39 Verifying : python-rpm-macros-3-26.fc28.noarch 20/39 Verifying : python3-rpm-generators-5-1.fc28.noarch 21/39 Verifying : python3-rpm-macros-3-26.fc28.noarch 22/39 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 23/39 Verifying : nim-srpm-macros-1-1.fc28.noarch 24/39 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 25/39 Verifying : openblas-srpm-macros-2-2.fc27.noarch 26/39 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 27/39 Verifying : rust-srpm-macros-5-1.fc28.noarch 28/39 Verifying : file-5.32-3.fc28.riscv64 29/39 Verifying : python2-rpm-macros-3-26.fc28.noarch 30/39 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 31/39 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 32/39 Verifying : gnat-srpm-macros-4-5.fc28.noarch 33/39 Verifying : go-srpm-macros-2-11.fc28.noarch 34/39 Verifying : perl-srpm-macros-1-26.fc28.noarch 35/39 Verifying : python-srpm-macros-3-26.fc28.noarch 36/39 Verifying : dwz-0.12-5.fc28.riscv64 37/39 Verifying : zip-3.0-20.fc28.riscv64 38/39 Verifying : unzip-6.0-36.fc28.riscv64 39/39 Installed: libxml2-devel.riscv64 2.9.3-4.fc28 libxslt-devel.riscv64 1.1.28-13.fc28 python2-Cython.riscv64 0.27.3-2.fc28 python2-devel.riscv64 2.7.14-9.fc28 python2-setuptools.noarch 38.4.0-3.fc28 python3-Cython.riscv64 0.27.3-2.fc28 python3-devel.riscv64 3.6.4-14.0.fc28 python3-setuptools.noarch 38.4.0-3.fc28 dwz.riscv64 0.12-5.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libgcrypt-devel.riscv64 1.8.2-1.fc27 libgpg-error-devel.riscv64 1.27-3.fc27 libpkgconf.riscv64 1.4.1-1.fc27 libxslt.riscv64 1.1.28-13.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 python2-rpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-rpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 unzip.riscv64 6.0-36.fc28 xz-devel.riscv64 5.2.3-5.fc28 zip.riscv64 3.0-20.fc28 zlib-devel.riscv64 1.2.11-4.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:00:02 ago on Wed Feb 21 19:57:18 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:00:22 ago on Wed Feb 21 19:57:18 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group patch bzip2 fedora-release make gawk cpio util-linux redhat-rpm-config bash unzip gzip coreutils tar which rpm-build grep xz sed diffutils info findutils shadow-utils ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 11 Packages Total download size: 11 M Installed size: 48 M Downloading Packages: (1/11): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/11): tar-1.29-7 6% [= ] 2.6 MB/s | 799 kB 00:04 ETA (1/11): make-4.2.1-6.fc27.riscv64.rpm 912 kB/s | 486 kB 00:00 (2-3/11): diffutils- 12% [==- ] 2.6 MB/s | 1.4 MB 00:03 ETA (2/11): diffutils-3.6-3.fc28.riscv64.rpm 774 kB/s | 577 kB 00:00 (3-4/11): tar-1.29-7 14% [==- ] 2.5 MB/s | 1.7 MB 00:03 ETA (3/11): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 654 kB/s | 235 kB 00:00 (4-5/11): tar-1.29-7 18% [===- ] 2.5 MB/s | 2.1 MB 00:03 ETA (4/11): tar-1.29-7.fc27.riscv64.rpm 688 kB/s | 805 kB 00:01 (5-6/11): zstd-1.3.3 20% [==== ] 2.5 MB/s | 2.3 MB 00:03 ETA (5/11): which-2.21-4.fc28.riscv64.rpm 328 kB/s | 65 kB 00:00 (6/11): zstd-1.3.3-1 20% [==== ] 2.5 MB/s | 2.3 MB 00:03 ETA (6/11): xz-5.2.3-5.fc28.riscv64.rpm 884 kB/s | 212 kB 00:00 (7-8/11): zstd-1.3.3 25% [===== ] 2.5 MB/s | 3.0 MB 00:03 ETA (7/11): patch-2.7.5-6.fc27.riscv64.rpm 486 kB/s | 270 kB 00:00 (8-9/11): bzip2-1.0. 27% [===== ] 2.3 MB/s | 3.1 MB 00:03 ETA (8/11): bzip2-1.0.6-24.fc28.riscv64.rpm 455 kB/s | 81 kB 00:00 (9-10/11): elfutils- 28% [=====- ] 2.3 MB/s | 3.2 MB 00:03 ETA (9-11/11): binutils- 35% [======= ] 2.3 MB/s | 4.1 MB 00:03 ETA (9-11/11): binutils- 43% [========- ] 2.4 MB/s | 5.0 MB 00:02 ETA (9/11): zstd-1.3.3-1.fc27.riscv64.rpm 626 kB/s | 1.1 MB 00:01 (10-11/11): binutils 44% [========- ] 2.3 MB/s | 5.1 MB 00:02 ETA (10/11): elfutils-0.170-4.fc28.riscv64.rpm 770 kB/s | 791 kB 00:01 (11/11): binutils-2. 46% [========= ] 2.3 MB/s | 5.3 MB 00:02 ETA (11/11): binutils-2. 53% [==========- ] 2.3 MB/s | 6.2 MB 00:02 ETA (11/11): binutils-2. 61% [============ ] 2.3 MB/s | 7.0 MB 00:01 ETA (11/11): binutils-2. 68% [=============- ] 2.4 MB/s | 7.9 MB 00:01 ETA (11/11): binutils-2. 76% [=============== ] 2.4 MB/s | 8.7 MB 00:01 ETA (11/11): binutils-2. 83% [================- ] 2.4 MB/s | 9.6 MB 00:00 ETA (11/11): binutils-2. 91% [================== ] 2.5 MB/s | 10 MB 00:00 ETA (11/11): binutils-2. 98% [===================-] 2.5 MB/s | 11 MB 00:00 ETA (11/11): binutils-2.30-1.fc28.riscv64.rpm 1.8 MB/s | 6.9 MB 00:03 -------------------------------------------------------------------------------- Total 1.9 MB/s | 11 MB 00:05 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [==== ] 1/1 Preparing : [========= ] 1/1 Preparing : [============= ] 1/1 Preparing : [================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/11 Installing : binutils-2.30-1.fc28.ris [= ] 1/11 Installing : binutils-2.30-1.fc28.ris [== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======== ] 1/11 Installing : binutils-2.30-1.fc28.ris [========= ] 1/11 Installing : binutils-2.30-1.fc28.ris [========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [============ ] 1/11 Installing : binutils-2.30-1.fc28.ris [============= ] 1/11 Installing : binutils-2.30-1.fc28.ris [============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [================ ] 1/11 Installing : binutils-2.30-1.fc28.ris [================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/11 Installing : binutils-2.30-1.fc28.riscv64 1/11 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/11 Installing : elfutils-0.170-4.fc28.ri [ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/11 Installing : elfutils-0.170-4.fc28.riscv64 2/11 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.riscv64 3/11 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 4/11 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv64 5/11 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv64 6/11 Installing : diffutils-3.6-3.fc28.ris [ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/11 Installing : diffutils-3.6-3.fc28.riscv64 7/11 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/11 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv64 8/11 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/11 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/11 Installing : which-2.21-4.fc28.riscv6 [ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/11 Installing : which-2.21-4.fc28.riscv64 10/11 Running scriptlet: which-2.21-4.fc28.riscv64 10/11 Installing : make-1:4.2.1-6.fc27.risc [ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 11/11 Installing : make-1:4.2.1-6.fc27.riscv64 11/11 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 11/11 Verifying : tar-2:1.29-7.fc27.riscv64 1/11 Verifying : diffutils-3.6-3.fc28.riscv64 2/11 Verifying : make-1:4.2.1-6.fc27.riscv64 3/11 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 4/11 Verifying : zstd-1.3.3-1.fc27.riscv64 5/11 Verifying : which-2.21-4.fc28.riscv64 6/11 Verifying : patch-2.7.5-6.fc27.riscv64 7/11 Verifying : xz-5.2.3-5.fc28.riscv64 8/11 Verifying : bzip2-1.0.6-24.fc28.riscv64 9/11 Verifying : elfutils-0.170-4.fc28.riscv64 10/11 Verifying : binutils-2.30-1.fc28.riscv64 11/11 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:02:00 ago on Wed Feb 21 19:57:18 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 458 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 594 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-heade 35% [======= ] 731 kB/s | 910 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 801 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 788 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 89% [=================- ] 929 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 946 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 929 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 976 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off