OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Mon Feb 19 18:53:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/iec16022-0.2.4-16.fc25.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nocheck Installing /var/tmp/iec16022-0.2.4-16.fc25.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.reOR58 + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf iec16022-0.2.4 + /usr/bin/gzip -dc /rpmbuild/SOURCES/iec16022-0.2.4.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd iec16022-0.2.4 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (iec16022-0.2.4-test-suite-fix.patch):' Patch #0 (iec16022-0.2.4-test-suite-fix.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .orig --fuzz=0 patching file test/testsuite.sh + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.HB7D59 + umask 022 + cd /rpmbuild/BUILD + cd iec16022-0.2.4 + autoconf aclocal.m4:16: warning: this file was generated for autoconf 2.64. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:39: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... aclocal.m4:1037: _LT_SYS_MODULE_PATH_AIX is expanded from... aclocal.m4:4185: _LT_LINKER_SHLIBS is expanded from... aclocal.m4:5267: _LT_LANG_C_CONFIG is expanded from... aclocal.m4:159: _LT_SETUP is expanded from... aclocal.m4:88: LT_INIT is expanded from... aclocal.m4:123: AC_PROG_LIBTOOL is expanded from... configure.ac:39: the top level configure.ac:39: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... aclocal.m4:4185: _LT_LINKER_SHLIBS is expanded from... aclocal.m4:5267: _LT_LANG_C_CONFIG is expanded from... aclocal.m4:159: _LT_SETUP is expanded from... aclocal.m4:88: LT_INIT is expanded from... aclocal.m4:123: AC_PROG_LIBTOOL is expanded from... configure.ac:39: the top level + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... none checking whether gcc and cc understand -c and -o together... yes checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-ar... no checking for ar... ar checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... random: crng init done yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for ANSI C header files... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking for main in -lpopt... yes checking for main in -lz... yes configure: creating ./config.status config.status: creating Makefile config.status: creating test/Makefile config.status: creating libiec16022.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool + sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool + make -j4 make all-recursive make[1]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4' Making all in test make[2]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4/test' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4/test' make[2]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4' CC image.lo /bin/sh ./libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o image.lo image.c CC reedsol.lo CC iec16022ecc200.lo CC iec16022.o /bin/sh ./libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o iec16022ecc200.lo iec16022ecc200.c /bin/sh ./libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o reedsol.lo reedsol.c gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o iec16022.o iec16022.c iec16022.c: In function 'main': iec16022.c:135:38: warning: suggest parentheses around '&&' within '||' [-Wparentheses] if (poptPeekArg(optCon) || !barcode && !infile || barcode && infile) { ~~~~~~~~~^~~~~~~~~~ iec16022.c:135:60: warning: suggest parentheses around '&&' within '||' [-Wparentheses] if (poptPeekArg(optCon) || !barcode && !infile || barcode && infile) { ~~~~~~~~^~~~~~~~~ iec16022.c:158:3: warning: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration] close(f); ^~~~~ pclose iec16022.c:187:51: warning: suggest parentheses around '&&' within '||' [-Wparentheses] if (ecc && ecc != 50 && ecc != 80 && ecc != 100 && ecc != 140 || ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ iec16022.c:188:40: warning: suggest parentheses around '&&' within '||' [-Wparentheses] ecc == 50 && W < 11 || ecc == 80 && W < 13 || ecc == 100 ~~~~~~~~~~^~~~~~~~~ iec16022.c:189:7: warning: suggest parentheses around '&&' within '||' [-Wparentheses] ecc == 50 && W < 11 || ecc == 80 && W < 13 || ecc == 100 ~~~~~~~~~~  && W < 13 || ecc == 140 && W < 17) { ^~~~~~~~~ iec16022.c:189:31: warning: suggest parentheses around '&&' within '||' [-Wparentheses] && W < 13 || ecc == 140 && W < 17) { ~~~~~~~~~~~^~~~~~~~~ iec16022.c:243:11: warning: suggest parentheses around '&&' within '||' [-Wparentheses] || n + 3 <= barcodelen ~~~~~~~~~~~~~~~~~~~  && (!isdigit(barcode[n]) ^~~~~~~~~~~~~~~~~~~~~~~~  || ~~  !isdigit(barcode ~~~~~~~~~~~~~~~~  [n + 1]))) ~~~~~~~~~ iec16022.c:279:53: warning: pointer targets in passing argument 5 of 'iec16022ecc200' differ in signedness [-Wpointer-sign] iec16022ecc200(&W, &H, &encoding, barcodelen, barcode, &len, ^~~~~~~ In file included from iec16022.c:34:0: iec16022ecc200.h:42:16: note: expected 'unsigned char *' but argument is of type 'char *' unsigned char *iec16022ecc200(int *Wptr, int *Hptr, char **encodingptr, ^~~~~~~~~~~~~~ iec16022ecc200.c:41:20: warning: missing braces around initializer [-Wmissing-braces] } ecc200matrix[] = { ^ 10, 10, 10, 10, 3, 3, 5, // { } 12, 12, 12, 12, 5, 5, 7, // { } 8, 18, 8, 18, 5, 5, 7, // { } 14, 14, 14, 14, 8, 8, 10, // { } 8, 32, 8, 16, 10, 10, 11, // { } 16, 16, 16, 16, 12, 12, 12, // { } 12, 26, 12, 26, 16, 16, 14, // { } 18, 18, 18, 18, 18, 18, 14, // { } 20, 20, 20, 20, 22, 22, 18, // { } 12, 36, 12, 18, 22, 22, 18, // { } 22, 22, 22, 22, 30, 30, 20, // { } 16, 36, 16, 18, 32, 32, 24, // { } 24, 24, 24, 24, 36, 36, 24, // { } 26, 26, 26, 26, 44, 44, 28, // { } 16, 48, 16, 24, 49, 49, 28, // { } 32, 32, 16, 16, 62, 62, 36, // { } 36, 36, 18, 18, 86, 86, 42, // { } 40, 40, 20, 20, 114, 114, 48, // { } 44, 44, 22, 22, 144, 144, 56, // { } 48, 48, 24, 24, 174, 174, 68, // { } 52, 52, 26, 26, 204, 102, 42, // { } 64, 64, 16, 16, 280, 140, 56, // { } 72, 72, 18, 18, 368, 92, 36, // { } 80, 80, 20, 20, 456, 114, 48, // { } 88, 88, 22, 22, 576, 144, 56, // { } 96, 96, 24, 24, 696, 174, 68, // { } 104, 104, 26, 26, 816, 136, 56, // { } 120, 120, 20, 20, 1050, 175, 68, // { } 132, 132, 22, 22, 1304, 163, 62, // { } 144, 144, 24, 24, 1558, 156, 62, // 156*4+155*2 { } 0 // terminate { }; } reedsol.c: In function 'rs_init_gf': reedsol.c:83:16: warning: argument 1 value '18446744073709551612' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] alog = (int *)malloc(sizeof(int) * logmod); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from reedsol.c:42:0: /usr/include/stdlib.h:539:14: note: in a call to allocation function 'malloc' declared here extern void *malloc (size_t __size) __THROW __attribute_malloc__ __wur; ^~~~~~ iec16022ecc200.c: In function 'ecc200encode': iec16022ecc200.c:247:20: warning: suggest parentheses around '&&' within '||' [-Wparentheses] if (tl - tp <= 1 && (enc == 'c' || enc == 't') || tl - tp <= 2 ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iec16022ecc200.c:281:10: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = 1; ^ iec16022ecc200.c:282:10: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = 30; ^ iec16022ecc200.c:286:10: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = ((w - e) + 3) % 40; ^ iec16022ecc200.c:295:11: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = 0; ^ iec16022ecc200.c:296:11: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = c; ^ iec16022ecc200.c:300:12: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = 1; ^ iec16022ecc200.c:301:12: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = ^ iec16022ecc200.c:307:13: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] ^ iec16022ecc200.c:309:13: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] ^ iec16022ecc200.c:325:10: warning: array subscript has type 'char' [-Wchar-subscripts] out[p++] = 0; // shift 1 pad at end ^ iec16022ecc200.c:358:19: warning: variable 'out' set but not used [-Wunused-but-set-variable] unsigned char out[4], p = 0; ^~~ image.c:244:8: warning: return type defaults to 'int' [-Wimplicit-int] static LZWFlush(Private * p) ^~~~~~~~ image.c:250:8: warning: return type defaults to 'int' [-Wimplicit-int] static LZWOut(Private * p, short v) ^~~~~~ image.c:263:8: warning: return type defaults to 'int' [-Wimplicit-int] static LZWClear(Private * p) ^~~~~~~~ image.c:277:8: warning: return type defaults to 'int' [-Wimplicit-int] static ImageStart(Private * p) ^~~~~~~~~~ image.c:288:8: warning: return type defaults to 'int' [-Wimplicit-int] static ImageEnd(Private * p) ^~~~~~~~ image.c:297:8: warning: return type defaults to 'int' [-Wimplicit-int] static ImageOut(Private * p, unsigned char c) ^~~~~~~~ iec16022ecc200.c: At top level: iec16022ecc200.c:469:42: warning: missing braces around initializer [-Wmissing-braces] unsigned char switchcost[E_MAX][E_MAX] = { ^ 0, 1, 1, 1, 1, 2, // From E_ASCII { } 1, 0, 2, 2, 2, 3, // From E_C40 { } 1, 2, 0, 2, 2, 3, // From E_TEXT { } 1, 2, 2, 0, 2, 3, // From E_X12 { } 1, 2, 2, 2, 0, 3, // From E_EDIFACT { } 0, 1, 1, 1, 1, 0, // From E_BINARY { }; } iec16022ecc200.c: In function 'encmake': iec16022ecc200.c:526:20: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p + sl][e].t && ((t = enc[p + sl][e].t + ^ iec16022ecc200.c:526:46: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p + sl][e].t && ((t = enc[p + sl][e].t + ^ iec16022ecc200.c:528:10: warning: array subscript has type 'char' [-Wchar-subscripts] [e]) < bl || !bl)) { ^ iec16022ecc200.c:535:10: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:535:30: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:562:21: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p + sl][e].t ^ iec16022ecc200.c:565:23: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p + sl][e].t + ^ iec16022ecc200.c:566:29: warning: array subscript has type 'char' [-Wchar-subscripts] switchcost[E_C40][e]) < bl ^ iec16022ecc200.c:579:11: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:579:31: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:607:21: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p + sl][e].t ^ iec16022ecc200.c:610:23: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p + sl][e].t + ^ iec16022ecc200.c:611:30: warning: array subscript has type 'char' [-Wchar-subscripts] switchcost[E_TEXT][e]) < bl ^ iec16022ecc200.c:623:11: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ image.c: In function 'writechunk': image.c:546:19: warning: implicit declaration of function 'htonl' [-Wimplicit-function-declaration] unsigned int v = htonl(len), crc; ^~~~~ iec16022ecc200.c:623:31: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:644:21: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p + sl][e].t ^ iec16022ecc200.c:647:23: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p + sl][e].t + ^ iec16022ecc200.c:648:29: warning: array subscript has type 'char' [-Wchar-subscripts] switchcost[E_X12][e]) < bl ^ iec16022ecc200.c:661:11: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:661:31: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + sl][b].s; ^ iec16022ecc200.c:672:38: warning: array subscript has type 'char' [-Wchar-subscripts] if (e != E_EDIFACT && enc[p + 1][e].t ^ iec16022ecc200.c:675:26: warning: array subscript has type 'char' [-Wchar-subscripts] 2 + enc[p + 1][e].t + ^ iec16022ecc200.c:676:31: warning: array subscript has type 'char' [-Wchar-subscripts] switchcost[E_ASCII][e]) ^ iec16022ecc200.c:690:24: warning: array subscript has type 'char' [-Wchar-subscripts] && enc[p + 2][e].t ^ iec16022ecc200.c:693:27: warning: array subscript has type 'char' [-Wchar-subscripts] 3 + enc[p + 2][e].t + ^ iec16022ecc200.c:694:32: warning: array subscript has type 'char' [-Wchar-subscripts] switchcost[E_ASCII][e]) ^ image.c: In function 'ImageWriteGif': image.c:394:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, buf, n); ^~~~~~~~~~~~~~~~~ image.c:421:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, "\0", 1); // end of image data ^~~~~~~~~~~~~~~~~~ iec16022ecc200.c:708:25: warning: array subscript has type 'char' [-Wchar-subscripts] && enc[p + 3][e].t ^ image.c:422:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, "\x3B", 1); // trailer ^~~~~~~~~~~~~~~~~~~~ iec16022ecc200.c:712:17: warning: array subscript has type 'char' [-Wchar-subscripts] 3][e].t + ^ iec16022ecc200.c:714:23: warning: array subscript has type 'char' [-Wchar-subscripts] [E_ASCII][e]) ^ image.c: In function 'ImageStart': image.c:280:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(p->fh, &b, 1); ^~~~~~~~~~~~~~~~~~~ image.c:286:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ iec16022ecc200.c:730:13: warning: array subscript has type 'char' [-Wchar-subscripts] [e].t ^ iec16022ecc200.c:735:14: warning: array subscript has type 'char' [-Wchar-subscripts] 4][e]. ^ image.c: In function 'LZWClear': image.c:275:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ iec16022ecc200.c:739:15: warning: array subscript has type 'char' [-Wchar-subscripts] [e]) < bl ^ image.c: In function 'LZWOut': image.c:261:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ iec16022ecc200.c:768:11: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + bs][b].s; ^ image.c: In function 'LZWFlush': image.c:246:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(p->fh, p->block, *p->block + 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iec16022ecc200.c:768:31: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + bs][b].s; ^ image.c:248:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ iec16022ecc200.c:773:18: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p + 1][e].t ^ iec16022ecc200.c:776:20: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p + 1][e].t + switchcost[E_BINARY][e] + ^ iec16022ecc200.c:776:48: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p + 1][e].t + switchcost[E_BINARY][e] + ^ image.c: In function 'ImageOut': image.c:320:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ iec16022ecc200.c:778:18: warning: array subscript has type 'char' [-Wchar-subscripts] && enc[p + 1][e].t == 249) ? 1 : 0)) ^ image.c: In function 'ImageEnd': image.c:295:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ iec16022ecc200.c:786:10: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + 1][b].s; ^ iec16022ecc200.c:786:29: warning: array subscript has type 'char' [-Wchar-subscripts] enc[p][b].s += enc[p + 1][b].s; ^ iec16022ecc200.c:801:15: warning: array subscript has type 'char' [-Wchar-subscripts] if (enc[p][e].t ^ iec16022ecc200.c:802:24: warning: array subscript has type 'char' [-Wchar-subscripts] && ((t = enc[p][e].t + switchcost[cur][e]) < ^ iec16022ecc200.c:802:42: warning: array subscript has type 'char' [-Wchar-subscripts] && ((t = enc[p][e].t + switchcost[cur][e]) < ^ iec16022ecc200.c:802:47: warning: array subscript has type 'char' [-Wchar-subscripts] && ((t = enc[p][e].t + switchcost[cur][e]) < ^ iec16022ecc200.c:803:18: warning: suggest parentheses around '&&' within '||' [-Wparentheses] m || t == m && e == cur || !m)) { ~~~~~~~^~~~~~~~~~~ iec16022ecc200.c:808:14: warning: array subscript has type 'char' [-Wchar-subscripts] m = enc[p][b].s; ^ iec16022ecc200.c:810:19: warning: array subscript has type 'char' [-Wchar-subscripts] *lenp = enc[p][b].t; ^ iec16022ecc200.c:812:27: warning: array subscript has type 'char' [-Wchar-subscripts] encoding[p++] = encchr[b]; ^ image.c: In function 'writecrc': image.c:538:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, ptr, len); ^~~~~~~~~~~~~~~~~~~ image.c: In function 'writechunk': image.c:547:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, &v, 4); ^~~~~~~~~~~~~~~~ image.c:552:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, &v, 4); ^~~~~~~~~~~~~~~~ image.c: In function 'ImageWritePNG': image.c:573:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, "\211PNG\r\n\032\n", 8); // PNG header ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ image.c:591:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, &v, 4); ^~~~~~~~~~~~~~~~ image.c:598:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, &v, 4); ^~~~~~~~~~~~~~~~ image.c:607:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, &v, 4); ^~~~~~~~~~~~~~~~ image.c:612:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fh, &v, 4); ^~~~~~~~~~~~~~~~ iec16022ecc200.c: In function 'iec16022ecc200': iec16022ecc200.c:941:9: warning: suggest parentheses around '&&' within '||' [-Wparentheses] if (v == 1 || v > 7 ~~~~~  && (binary[(v >> 3) - 1] & (1 << (v & 7)))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iec16022ecc200.c: In function 'ecc200encode': iec16022ecc200.c:284:8: warning: 'e' may be used uninitialized in this function [-Wmaybe-uninitialized] w = strchr(e, c); ~~^~~~~~~~~~~~~~ CCLD libiec16022.la CCLD iec16022 make[2]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4' make[1]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Rznxx6 + umask 022 + cd /rpmbuild/BUILD + '[' /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 '!=' / ']' + rm -rf /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 ++ dirname /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 + mkdir -p /rpmbuild/BUILDROOT + mkdir /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 + cd iec16022-0.2.4 + make install DESTDIR=/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 Making install in test make[1]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4/test' make[2]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4/test' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4/test' make[1]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4/test' make[1]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4' make[2]: Entering directory '/rpmbuild/BUILD/iec16022-0.2.4' test -z "/usr/lib64" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64" /bin/sh ./libtool --mode=install /usr/bin/install -c libiec16022.la '/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64' libtool: install: /usr/bin/install -c .libs/libiec16022.so.0.0.0 /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64/libiec16022.so.0.0.0 libtool: install: (cd /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64 && { ln -s -f libiec16022.so.0.0.0 libiec16022.so.0 || { rm -f libiec16022.so.0 && ln -s libiec16022.so.0.0.0 libiec16022.so.0; }; }) libtool: install: (cd /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64 && { ln -s -f libiec16022.so.0.0.0 libiec16022.so || { rm -f libiec16022.so && ln -s libiec16022.so.0.0.0 libiec16022.so; }; }) libtool: install: /usr/bin/install -c .libs/libiec16022.lai /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64/libiec16022.la libtool: install: warning: remember to run `libtool --finish /usr/lib64' test -z "/usr/bin" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/bin" /bin/sh ./libtool --mode=install /usr/bin/install -c iec16022 '/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/bin' libtool: install: warning: `libiec16022.la' has not been installed in `/usr/lib64' libtool: install: /usr/bin/install -c .libs/iec16022 /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/bin/iec16022 test -z "/usr/include/iec16022" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/include/iec16022" /usr/bin/install -c -m 644 iec16022ecc200.h image.h reedsol.h '/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/include/iec16022' test -z "/usr/share/man/man1" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/man/man1" /usr/bin/install -c -m 644 iec16022.1 '/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/man/man1' test -z "/usr/lib64/pkgconfig" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64/pkgconfig" /usr/bin/install -c -m 644 libiec16022.pc '/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64/pkgconfig' make[2]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4' make[1]: Leaving directory '/rpmbuild/BUILD/iec16022-0.2.4' + rm -f /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/lib64/libiec16022.la + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: iec16022-0.2.4-16.fc28.riscv64 Provides: iec16022 = 0.2.4-16.fc28 iec16022(riscv-64) = 0.2.4-16.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libiec16022.so.0()(64bit) libpopt.so.0()(64bit) libpopt.so.0(LIBPOPT_0)(64bit) libz.so.1()(64bit) rtld(GNU_HASH) Processing files: iec16022-libs-0.2.4-16.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.aId3FQ + umask 022 + cd /rpmbuild/BUILD + cd iec16022-0.2.4 + DOCDIR=/rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + cp -pr AUTHORS /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + cp -pr ChangeLog /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + cp -pr COPYING /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + cp -pr README /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + cp -pr TODO /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64/usr/share/doc/iec16022-libs + exit 0 Provides: iec16022-libs = 0.2.4-16.fc28 iec16022-libs(riscv-64) = 0.2.4-16.fc28 libiec16022.so.0()(64bit) Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libpopt.so.0()(64bit) libz.so.1()(64bit) rtld(GNU_HASH) Processing files: iec16022-devel-0.2.4-16.fc28.riscv64 Provides: iec16022-devel = 0.2.4-16.fc28 iec16022-devel(riscv-64) = 0.2.4-16.fc28 pkgconfig(libiec16022) = 0.2.4 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libiec16022.so.0()(64bit) Checking for unpackaged file(s): /usr/lib/rpm/check-files /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /rpmbuild/RPMS/riscv64/iec16022-0.2.4-16.fc28.riscv64.rpm Wrote: /rpmbuild/RPMS/riscv64/iec16022-libs-0.2.4-16.fc28.riscv64.rpm Wrote: /rpmbuild/RPMS/riscv64/iec16022-devel-0.2.4-16.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ORQyXH + umask 022 + cd /rpmbuild/BUILD + cd iec16022-0.2.4 + /usr/bin/rm -rf /rpmbuild/BUILDROOT/iec16022-0.2.4-16.fc28.riscv64 + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.iG1dHO + umask 022 + cd /rpmbuild/BUILD + rm -rf iec16022-0.2.4 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off