OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 17:28:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libuv-1.9.1-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libuv.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [=- ] 2.9 MB/s | 895 kB 00:03 ETA Local RPMS 15% [=== ] 2.9 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 2.9 MB/s | 2.7 MB 00:02 ETA Local RPMS 33% [======- ] 3.0 MB/s | 3.8 MB 00:02 ETA Local RPMS 41% [======== ] 3.0 MB/s | 4.8 MB 00:02 ETA Local RPMS 50% [========== ] 3.0 MB/s | 5.8 MB 00:01 ETA Local RPMS 59% [===========- ] 2.8 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 2.8 MB/s | 7.7 MB 00:01 ETA Local RPMS 76% [=============== ] 2.9 MB/s | 8.7 MB 00:00 ETA Local RPMS 84% [================- ] 2.9 MB/s | 9.6 MB 00:00 ETA Local RPMS 93% [==================- ] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:26 ago on Wed Feb 21 17:28:36 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k libtool riscv64 2.4.6-21.fc27 local 707 k Installing dependencies: emacs-filesystem noarch 1:25.3-5.fc28 local 67 k m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k tar riscv64 2:1.29-7.fc27 local 805 k Transaction Summary ================================================================================ Install 40 Packages Total download size: 18 M Installed size: 54 M Downloading Packages: (1/40): autoconf-2.6 0% [ ] --- B/s | 0 B --:-- ETA (1/40): emacs-filesystem-25.3-5.fc28.noarch.rpm 579 kB/s | 67 kB 00:00 (2-3/40): autoconf-2 1% [ ] 1.6 MB/s | 227 kB 00:11 ETA (2-4/40): libtool-2. 5% [= ] 1.7 MB/s | 1.0 MB 00:10 ETA (2-4/40): autoconf-2 11% [== ] 1.8 MB/s | 2.0 MB 00:09 ETA (2/40): autoconf-2.69-26.fc28.noarch.rpm 824 kB/s | 709 kB 00:00 (3-4/40): libtool-2. 11% [== ] 1.7 MB/s | 2.1 MB 00:09 ETA (3/40): automake-1.15.1-3.fc28.noarch.rpm 771 kB/s | 706 kB 00:00 (4/40): libtool-2.4. 11% [== ] 1.7 MB/s | 2.1 MB 00:09 ETA (4/40): libtool-2.4.6-21.fc27.riscv64.rpm 705 kB/s | 707 kB 00:01 (5-6/40): perl-Carp- 12% [==- ] 1.7 MB/s | 2.3 MB 00:09 ETA (5/40): perl-Carp-1.42-408.fc27.0.riscv64.noarc 375 kB/s | 84 kB 00:00 (6-7/40): perl-Expor 12% [==- ] 1.7 MB/s | 2.3 MB 00:09 ETA (6/40): perl-File-Path-2.15-1.fc27.noarch.rpm 638 kB/s | 37 kB 00:00 (7-8/40): perl-Expor 13% [==- ] 1.7 MB/s | 2.5 MB 00:09 ETA (7/40): perl-Exporter-5.72-408.fc27.0.riscv64.n 438 kB/s | 87 kB 00:00 (8-9/40): perl-Getop 14% [==- ] 1.7 MB/s | 2.5 MB 00:09 ETA (8/40): perl-Getopt-Long-2.50-3.fc27.noarch.rpm 472 kB/s | 61 kB 00:00 (9-10/40): perl-Thre 14% [==- ] 1.7 MB/s | 2.6 MB 00:09 ETA (9/40): perl-Thread-Queue-3.12-408.fc27.0.riscv 556 kB/s | 77 kB 00:00 (10-11/40): perl-con 15% [=== ] 1.7 MB/s | 2.8 MB 00:09 ETA (10/40): perl-constant-1.33-408.fc27.0.riscv64. 575 kB/s | 79 kB 00:00 (11-12/40): perl-Err 15% [=== ] 1.7 MB/s | 2.9 MB 00:09 ETA (11/40): perl-Errno-1.28-408.fc28.1.riscv64.ris 508 kB/s | 73 kB 00:00 (12-13/40): tar-1.29 16% [=== ] 1.7 MB/s | 3.0 MB 00:09 ETA (12-14/40): perl-lib 21% [==== ] 1.7 MB/s | 3.9 MB 00:08 ETA (12/40): tar-1.29-7.fc27.riscv64.rpm 607 kB/s | 805 kB 00:01 (13-14/40): perl-lib 24% [====- ] 1.7 MB/s | 4.4 MB 00:07 ETA (13/40): perl-IO-1.38-408.fc28.1.riscv64.riscv6 821 kB/s | 176 kB 00:00 (14-15/40): perl-lib 27% [=====- ] 1.8 MB/s | 4.9 MB 00:07 ETA (14/40): perl-PathTools-3.67-408.fc27.0.riscv64 908 kB/s | 166 kB 00:00 (15-16/40): perl-int 30% [====== ] 1.8 MB/s | 5.4 MB 00:06 ETA (15/40): perl-threads-2.21-1.fc27.riscv64.rpm 843 kB/s | 104 kB 00:00 (16-17/40): perl-int 32% [====== ] 1.8 MB/s | 5.8 MB 00:06 ETA (16/40): perl-Text-ParseWords-3.30-408.fc27.0.r 787 kB/s | 73 kB 00:00 (17-18/40): perl-int 33% [======- ] 1.8 MB/s | 6.0 MB 00:06 ETA (17-19/40): m4-1.4.1 37% [=======- ] 1.9 MB/s | 6.8 MB 00:05 ETA (17/40): m4-1.4.18-5.fc28.riscv64.rpm 876 kB/s | 369 kB 00:00 (18-19/40): perl-int 39% [=======- ] 1.9 MB/s | 7.1 MB 00:05 ETA (18-20/40): perl-lib 41% [======== ] 1.8 MB/s | 7.4 MB 00:05 ETA (18/40): perl-Data-Dumper-2.167-408.fc27.0.risc 852 kB/s | 149 kB 00:00 (19-20/40): perl-lib 42% [======== ] 1.8 MB/s | 7.6 MB 00:05 ETA (19/40): perl-Text-Tabs+Wrap-2013.0523-408.fc27 834 kB/s | 80 kB 00:00 (20-21/40): perl-lib 43% [========- ] 1.8 MB/s | 7.8 MB 00:05 ETA (20/40): perl-parent-0.236-408.fc27.0.riscv64.n 726 kB/s | 71 kB 00:00 (21-22/40): perl-lib 44% [========- ] 1.8 MB/s | 8.0 MB 00:05 ETA (21/40): perl-Scalar-List-Utils-1.48-1.fc27.ris 842 kB/s | 119 kB 00:00 (22-23/40): perl-lib 46% [========= ] 1.8 MB/s | 8.4 MB 00:05 ETA (22/40): perl-Unicode-Normalize-1.25-408.fc27.0 864 kB/s | 164 kB 00:00 (23-24/40): perl-lib 49% [=========- ] 1.8 MB/s | 8.9 MB 00:04 ETA (23/40): perl-macros-5.26.1-408.fc28.1.riscv64. 749 kB/s | 69 kB 00:00 (24-25/40): perl-lib 50% [========== ] 1.8 MB/s | 9.1 MB 00:04 ETA (24/40): perl-threads-shared-1.58-1.fc27.riscv6 843 kB/s | 91 kB 00:00 (25-26/40): perl-int 52% [========== ] 1.9 MB/s | 9.4 MB 00:04 ETA (25/40): perl-Socket-2.027-1.fc27.riscv64.rpm 837 kB/s | 95 kB 00:00 (26-27/40): perl-int 53% [==========- ] 1.9 MB/s | 9.7 MB 00:04 ETA (26/40): perl-Pod-Usage-1.69-408.fc27.0.riscv64 829 kB/s | 89 kB 00:00 (27-28/40): perl-int 55% [=========== ] 1.9 MB/s | 9.9 MB 00:04 ETA (27/40): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 835 kB/s | 139 kB 00:00 (28-29/40): perl-int 57% [===========- ] 1.9 MB/s | 10 MB 00:04 ETA (28/40): perl-podlators-4.09-408.fc27.0.riscv64 833 kB/s | 157 kB 00:00 (29-30/40): perl-int 60% [============ ] 1.9 MB/s | 11 MB 00:03 ETA (29/40): perl-File-Temp-0.230.400-408.fc27.0.ri 783 kB/s | 103 kB 00:00 (30-31/40): perl-int 62% [============ ] 1.9 MB/s | 11 MB 00:03 ETA (30/40): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 738 kB/s | 97 kB 00:00 (31-32/40): perl-lib 63% [============- ] 1.9 MB/s | 11 MB 00:03 ETA (31/40): perl-Pod-Simple-3.35-408.fc27.0.riscv6 898 kB/s | 271 kB 00:00 (32-33/40): perl-lib 68% [=============- ] 1.9 MB/s | 12 MB 00:02 ETA (32/40): perl-libs-5.26.1-408.fc28.1.riscv64.ri 684 kB/s | 3.3 MB 00:04 (33-34/40): perl-int 70% [============== ] 1.8 MB/s | 13 MB 00:02 ETA (33/40): perl-Time-Local-1.250-394.fc27.noarch. 688 kB/s | 30 kB 00:00 (34-35/40): perl-int 70% [============== ] 1.8 MB/s | 13 MB 00:02 ETA (34/40): perl-MIME-Base64-3.15-408.fc27.0.riscv 831 kB/s | 111 kB 00:00 (35-36/40): perl-Enc 72% [==============- ] 1.8 MB/s | 13 MB 00:02 ETA (35/40): perl-Storable-2.62-408.fc27.0.riscv64. 898 kB/s | 205 kB 00:00 (36-37/40): perl-Enc 76% [=============== ] 1.8 MB/s | 14 MB 00:02 ETA (36/40): perl-Term-ANSIColor-4.06-408.fc27.0.ri 798 kB/s | 94 kB 00:00 (37-38/40): perl-Enc 77% [===============- ] 1.8 MB/s | 14 MB 00:02 ETA (37/40): perl-Term-Cap-1.17-408.fc27.0.riscv64. 813 kB/s | 78 kB 00:00 (38-39/40): perl-Enc 78% [===============- ] 1.8 MB/s | 14 MB 00:02 ETA (38/40): perl-Pod-Escapes-1.07-408.fc27.0.riscv 807 kB/s | 77 kB 00:00 (39-40/40): perl-Enc 80% [================ ] 1.8 MB/s | 14 MB 00:01 ETA (39-40/40): perl-int 85% [================= ] 1.9 MB/s | 15 MB 00:01 ETA (39/40): perl-Encode-2.94-16.fc27.riscv64.rpm 720 kB/s | 1.4 MB 00:02 (40/40): perl-interp 88% [=================- ] 1.9 MB/s | 16 MB 00:01 ETA (40/40): perl-interp 93% [==================- ] 1.9 MB/s | 17 MB 00:00 ETA (40/40): perl-interp 97% [===================-] 2.0 MB/s | 18 MB 00:00 ETA (40/40): perl-interpreter-5.26.1-408.fc28.1.ris 870 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 18 MB 00:10 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/40 Installing : perl-Exporter-5.72-408.f [===== ] 1/40 Installing : perl-Exporter-5.72-408.f [======= ] 1/40 Installing : perl-Exporter-5.72-408.f [==================== ] 1/40 Installing : perl-Exporter-5.72-408.f [======================== ] 1/40 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/40 Installing : perl-libs-4:5.26.1-408.f [ ] 2/40 Installing : perl-libs-4:5.26.1-408.f [= ] 2/40 Installing : perl-libs-4:5.26.1-408.f [== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/40 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/40 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/40 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/40 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/40 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/40 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/40 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/40 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/40 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/40 Installing : perl-Carp-1.42-408.fc27. [ ] 3/40 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/40 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/40 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/40 Installing : perl-Scalar-List-Utils-3 [ ] 4/40 Installing : perl-Scalar-List-Utils-3 [= ] 4/40 Installing : perl-Scalar-List-Utils-3 [== ] 4/40 Installing : perl-Scalar-List-Utils-3 [=== ] 4/40 Installing : perl-Scalar-List-Utils-3 [===== ] 4/40 Installing : perl-Scalar-List-Utils-3 [======== ] 4/40 Installing : perl-Scalar-List-Utils-3 [========== ] 4/40 Installing : perl-Scalar-List-Utils-3 [============= ] 4/40 Installing : perl-Scalar-List-Utils-3 [================ ] 4/40 Installing : perl-Scalar-List-Utils-3 [================== ] 4/40 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/40 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/40 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/40 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/40 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/40 Installing : perl-Text-ParseWords-3.3 [ ] 5/40 Installing : perl-Text-ParseWords-3.3 [======= ] 5/40 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/40 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/40 Installing : perl-Term-ANSIColor-4.06 [ ] 6/40 Installing : perl-Term-ANSIColor-4.06 [==== ] 6/40 Installing : perl-Term-ANSIColor-4.06 [================== ] 6/40 Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/40 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/40 Installing : perl-macros-4:5.26.1-408 [ ] 7/40 Installing : perl-macros-4:5.26.1-408 [======================== ] 7/40 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/40 Installing : perl-constant-1.33-408.f [ ] 8/40 Installing : perl-constant-1.33-408.f [======= ] 8/40 Installing : perl-constant-1.33-408.f [======================== ] 8/40 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 8/40 Installing : perl-Errno-1.28-408.fc28 [ ] 9/40 Installing : perl-Errno-1.28-408.fc28 [================= ] 9/40 Installing : perl-Errno-1.28-408.fc28 [======================== ] 9/40 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 9/40 Installing : perl-File-Path-2.15-1.fc [ ] 10/40 Installing : perl-File-Path-2.15-1.fc [==== ] 10/40 Installing : perl-File-Path-2.15-1.fc [======== ] 10/40 Installing : perl-File-Path-2.15-1.fc [==================== ] 10/40 Installing : perl-File-Path-2.15-1.fc [======================== ] 10/40 Installing : perl-File-Path-2.15-1.fc27.noarch 10/40 Installing : perl-PathTools-3.67-408. [ ] 11/40 Installing : perl-PathTools-3.67-408. [== ] 11/40 Installing : perl-PathTools-3.67-408. [=== ] 11/40 Installing : perl-PathTools-3.67-408. [==== ] 11/40 Installing : perl-PathTools-3.67-408. [======= ] 11/40 Installing : perl-PathTools-3.67-408. [========= ] 11/40 Installing : perl-PathTools-3.67-408. [=========== ] 11/40 Installing : perl-PathTools-3.67-408. [============== ] 11/40 Installing : perl-PathTools-3.67-408. [================== ] 11/40 Installing : perl-PathTools-3.67-408. [==================== ] 11/40 Installing : perl-PathTools-3.67-408. [===================== ] 11/40 Installing : perl-PathTools-3.67-408. [====================== ] 11/40 Installing : perl-PathTools-3.67-408. [======================= ] 11/40 Installing : perl-PathTools-3.67-408. [======================== ] 11/40 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 11/40 Installing : perl-threads-shared-1.58 [ ] 12/40 Installing : perl-threads-shared-1.58 [=== ] 12/40 Installing : perl-threads-shared-1.58 [======= ] 12/40 Installing : perl-threads-shared-1.58 [========== ] 12/40 Installing : perl-threads-shared-1.58 [============== ] 12/40 Installing : perl-threads-shared-1.58 [================= ] 12/40 Installing : perl-threads-shared-1.58 [==================== ] 12/40 Installing : perl-threads-shared-1.58 [======================= ] 12/40 Installing : perl-threads-shared-1.58 [======================== ] 12/40 Installing : perl-threads-shared-1.58-1.fc27.riscv64 12/40 Installing : perl-threads-1:2.21-1.fc [ ] 13/40 Installing : perl-threads-1:2.21-1.fc [=== ] 13/40 Installing : perl-threads-1:2.21-1.fc [====== ] 13/40 Installing : perl-threads-1:2.21-1.fc [========= ] 13/40 Installing : perl-threads-1:2.21-1.fc [============= ] 13/40 Installing : perl-threads-1:2.21-1.fc [================ ] 13/40 Installing : perl-threads-1:2.21-1.fc [================== ] 13/40 Installing : perl-threads-1:2.21-1.fc [===================== ] 13/40 Installing : perl-threads-1:2.21-1.fc [====================== ] 13/40 Installing : perl-threads-1:2.21-1.fc [======================= ] 13/40 Installing : perl-threads-1:2.21-1.fc [======================== ] 13/40 Installing : perl-threads-1:2.21-1.fc27.riscv64 13/40 Installing : perl-Text-Tabs+Wrap-2013 [ ] 14/40 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 14/40 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 14/40 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 14/40 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 14/40 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 14/40 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 14/40 Installing : perl-parent-1:0.236-408. [ ] 15/40 Installing : perl-parent-1:0.236-408. [============ ] 15/40 Installing : perl-parent-1:0.236-408. [======================== ] 15/40 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 15/40 Installing : perl-Unicode-Normalize-1 [ ] 16/40 Installing : perl-Unicode-Normalize-1 [= ] 16/40 Installing : perl-Unicode-Normalize-1 [== ] 16/40 Installing : perl-Unicode-Normalize-1 [=== ] 16/40 Installing : perl-Unicode-Normalize-1 [==== ] 16/40 Installing : perl-Unicode-Normalize-1 [===== ] 16/40 Installing : perl-Unicode-Normalize-1 [====== ] 16/40 Installing : perl-Unicode-Normalize-1 [======= ] 16/40 Installing : perl-Unicode-Normalize-1 [======== ] 16/40 Installing : perl-Unicode-Normalize-1 [========= ] 16/40 Installing : perl-Unicode-Normalize-1 [========== ] 16/40 Installing : perl-Unicode-Normalize-1 [============ ] 16/40 Installing : perl-Unicode-Normalize-1 [============= ] 16/40 Installing : perl-Unicode-Normalize-1 [============== ] 16/40 Installing : perl-Unicode-Normalize-1 [=============== ] 16/40 Installing : perl-Unicode-Normalize-1 [================ ] 16/40 Installing : perl-Unicode-Normalize-1 [================= ] 16/40 Installing : perl-Unicode-Normalize-1 [================== ] 16/40 Installing : perl-Unicode-Normalize-1 [=================== ] 16/40 Installing : perl-Unicode-Normalize-1 [==================== ] 16/40 Installing : perl-Unicode-Normalize-1 [===================== ] 16/40 Installing : perl-Unicode-Normalize-1 [====================== ] 16/40 Installing : perl-Unicode-Normalize-1 [======================= ] 16/40 Installing : perl-Unicode-Normalize-1 [======================== ] 16/40 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 16/40 Installing : perl-interpreter-4:5.26. [ ] 17/40 Installing : perl-interpreter-4:5.26. [= ] 17/40 Installing : perl-interpreter-4:5.26. [== ] 17/40 Installing : perl-interpreter-4:5.26. [=== ] 17/40 Installing : perl-interpreter-4:5.26. [==== ] 17/40 Installing : perl-interpreter-4:5.26. [===== ] 17/40 Installing : perl-interpreter-4:5.26. [====== ] 17/40 Installing : perl-interpreter-4:5.26. [======= ] 17/40 Installing : perl-interpreter-4:5.26. [======== ] 17/40 Installing : perl-interpreter-4:5.26. [========= ] 17/40 Installing : perl-interpreter-4:5.26. [========== ] 17/40 Installing : perl-interpreter-4:5.26. [=========== ] 17/40 Installing : perl-interpreter-4:5.26. [============ ] 17/40 Installing : perl-interpreter-4:5.26. [============= ] 17/40 Installing : perl-interpreter-4:5.26. [============== ] 17/40random: crng init done Installing : perl-interpreter-4:5.26. [=============== ] 17/40 Installing : perl-interpreter-4:5.26. [================ ] 17/40 Installing : perl-interpreter-4:5.26. [================= ] 17/40 Installing : perl-interpreter-4:5.26. [================== ] 17/40 Installing : perl-interpreter-4:5.26. [=================== ] 17/40 Installing : perl-interpreter-4:5.26. [==================== ] 17/40 Installing : perl-interpreter-4:5.26. [===================== ] 17/40 Installing : perl-interpreter-4:5.26. [====================== ] 17/40 Installing : perl-interpreter-4:5.26. [======================= ] 17/40 Installing : perl-interpreter-4:5.26. [======================== ] 17/40 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/40 Installing : perl-Socket-4:2.027-1.fc [ ] 18/40 Installing : perl-Socket-4:2.027-1.fc [=== ] 18/40 Installing : perl-Socket-4:2.027-1.fc [======= ] 18/40 Installing : perl-Socket-4:2.027-1.fc [========== ] 18/40 Installing : perl-Socket-4:2.027-1.fc [============== ] 18/40 Installing : perl-Socket-4:2.027-1.fc [================= ] 18/40 Installing : perl-Socket-4:2.027-1.fc [==================== ] 18/40 Installing : perl-Socket-4:2.027-1.fc [===================== ] 18/40 Installing : perl-Socket-4:2.027-1.fc [====================== ] 18/40 Installing : perl-Socket-4:2.027-1.fc [======================= ] 18/40 Installing : perl-Socket-4:2.027-1.fc [======================== ] 18/40 Installing : perl-Socket-4:2.027-1.fc27.riscv64 18/40 Installing : perl-IO-1.38-408.fc28.1. [ ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [= ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [=== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [==== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [===== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [====== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [======= ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [======== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [============== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [================= ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 19/40 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 19/40 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/40 Installing : perl-File-Temp-0.230.400 [ ] 20/40 Installing : perl-File-Temp-0.230.400 [=== ] 20/40 Installing : perl-File-Temp-0.230.400 [============ ] 20/40 Installing : perl-File-Temp-0.230.400 [===================== ] 20/40 Installing : perl-File-Temp-0.230.400 [======================== ] 20/40 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 20/40 Installing : perl-Storable-1:2.62-408 [ ] 21/40 Installing : perl-Storable-1:2.62-408 [== ] 21/40 Installing : perl-Storable-1:2.62-408 [==== ] 21/40 Installing : perl-Storable-1:2.62-408 [====== ] 21/40 Installing : perl-Storable-1:2.62-408 [======== ] 21/40 Installing : perl-Storable-1:2.62-408 [========== ] 21/40 Installing : perl-Storable-1:2.62-408 [============ ] 21/40 Installing : perl-Storable-1:2.62-408 [============== ] 21/40 Installing : perl-Storable-1:2.62-408 [================ ] 21/40 Installing : perl-Storable-1:2.62-408 [================== ] 21/40 Installing : perl-Storable-1:2.62-408 [==================== ] 21/40 Installing : perl-Storable-1:2.62-408 [====================== ] 21/40 Installing : perl-Storable-1:2.62-408 [======================== ] 21/40 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 21/40 Installing : perl-MIME-Base64-3.15-40 [ ] 22/40 Installing : perl-MIME-Base64-3.15-40 [= ] 22/40 Installing : perl-MIME-Base64-3.15-40 [== ] 22/40 Installing : perl-MIME-Base64-3.15-40 [========== ] 22/40 Installing : perl-MIME-Base64-3.15-40 [================== ] 22/40 Installing : perl-MIME-Base64-3.15-40 [======================= ] 22/40 Installing : perl-MIME-Base64-3.15-40 [======================== ] 22/40 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 22/40 Installing : perl-Term-Cap-1.17-408.f [ ] 23/40 Installing : perl-Term-Cap-1.17-408.f [==== ] 23/40 Installing : perl-Term-Cap-1.17-408.f [======================== ] 23/40 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 23/40 Installing : perl-Pod-Escapes-1:1.07- [ ] 24/40 Installing : perl-Pod-Escapes-1:1.07- [==== ] 24/40 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 24/40 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 24/40 Installing : perl-Time-Local-1:1.250- [ ] 25/40 Installing : perl-Time-Local-1:1.250- [= ] 25/40 Installing : perl-Time-Local-1:1.250- [===== ] 25/40 Installing : perl-Time-Local-1:1.250- [======== ] 25/40 Installing : perl-Time-Local-1:1.250- [========= ] 25/40 Installing : perl-Time-Local-1:1.250- [================= ] 25/40 Installing : perl-Time-Local-1:1.250- [=================== ] 25/40 Installing : perl-Time-Local-1:1.250- [======================== ] 25/40 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 25/40 Installing : perl-HTTP-Tiny-0.070-408 [ ] 26/40 Installing : perl-HTTP-Tiny-0.070-408 [== ] 26/40 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 26/40 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 26/40 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 26/40 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 26/40 Installing : perl-Pod-Simple-1:3.35-4 [ ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [= ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 27/40 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 27/40 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 27/40 Installing : perl-Encode-4:2.94-16.fc [ ] 28/40 Installing : perl-Encode-4:2.94-16.fc [= ] 28/40 Installing : perl-Encode-4:2.94-16.fc [== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [=== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [==== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [===== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [====== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [======= ] 28/40 Installing : perl-Encode-4:2.94-16.fc [======== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [========= ] 28/40 Installing : perl-Encode-4:2.94-16.fc [========== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [=========== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [============ ] 28/40 Installing : perl-Encode-4:2.94-16.fc [============= ] 28/40 Installing : perl-Encode-4:2.94-16.fc [============== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [=============== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [================ ] 28/40 Installing : perl-Encode-4:2.94-16.fc [================= ] 28/40 Installing : perl-Encode-4:2.94-16.fc [================== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [=================== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [==================== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [===================== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [====================== ] 28/40 Installing : perl-Encode-4:2.94-16.fc [======================= ] 28/40 Installing : perl-Encode-4:2.94-16.fc [======================== ] 28/40 Installing : perl-Encode-4:2.94-16.fc27.riscv64 28/40 Installing : perl-Getopt-Long-1:2.50- [ ] 29/40 Installing : perl-Getopt-Long-1:2.50- [=== ] 29/40 Installing : perl-Getopt-Long-1:2.50- [==== ] 29/40 Installing : perl-Getopt-Long-1:2.50- [===== ] 29/40 Installing : perl-Getopt-Long-1:2.50- [====== ] 29/40 Installing : perl-Getopt-Long-1:2.50- [======= ] 29/40 Installing : perl-Getopt-Long-1:2.50- [========= ] 29/40 Installing : perl-Getopt-Long-1:2.50- [=============== ] 29/40 Installing : perl-Getopt-Long-1:2.50- [===================== ] 29/40 Installing : perl-Getopt-Long-1:2.50- [======================== ] 29/40 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 29/40 Installing : perl-Pod-Usage-4:1.69-40 [ ] 30/40 Installing : perl-Pod-Usage-4:1.69-40 [== ] 30/40 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 30/40 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 30/40 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 30/40 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 30/40 Installing : perl-podlators-4.09-408. [ ] 31/40 Installing : perl-podlators-4.09-408. [= ] 31/40 Installing : perl-podlators-4.09-408. [== ] 31/40 Installing : perl-podlators-4.09-408. [=== ] 31/40 Installing : perl-podlators-4.09-408. [==== ] 31/40 Installing : perl-podlators-4.09-408. [===== ] 31/40 Installing : perl-podlators-4.09-408. [====== ] 31/40 Installing : perl-podlators-4.09-408. [======= ] 31/40 Installing : perl-podlators-4.09-408. [=========== ] 31/40 Installing : perl-podlators-4.09-408. [=============== ] 31/40 Installing : perl-podlators-4.09-408. [================ ] 31/40 Installing : perl-podlators-4.09-408. [================= ] 31/40 Installing : perl-podlators-4.09-408. [===================== ] 31/40 Installing : perl-podlators-4.09-408. [====================== ] 31/40 Installing : perl-podlators-4.09-408. [======================= ] 31/40 Installing : perl-podlators-4.09-408. [======================== ] 31/40 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 31/40 Installing : perl-Pod-Perldoc-3.28-40 [ ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [= ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 32/40 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 32/40 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 32/40 Installing : perl-Thread-Queue-3.12-4 [ ] 33/40 Installing : perl-Thread-Queue-3.12-4 [===== ] 33/40 Installing : perl-Thread-Queue-3.12-4 [====== ] 33/40 Installing : perl-Thread-Queue-3.12-4 [======================== ] 33/40 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 33/40 Installing : perl-Data-Dumper-2.167-4 [ ] 34/40 Installing : perl-Data-Dumper-2.167-4 [=== ] 34/40 Installing : perl-Data-Dumper-2.167-4 [==== ] 34/40 Installing : perl-Data-Dumper-2.167-4 [======== ] 34/40 Installing : perl-Data-Dumper-2.167-4 [============ ] 34/40 Installing : perl-Data-Dumper-2.167-4 [=============== ] 34/40 Installing : perl-Data-Dumper-2.167-4 [=================== ] 34/40 Installing : perl-Data-Dumper-2.167-4 [====================== ] 34/40 Installing : perl-Data-Dumper-2.167-4 [======================= ] 34/40 Installing : perl-Data-Dumper-2.167-4 [======================== ] 34/40 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 34/40 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 35/40 Installing : m4-1.4.18-5.fc28.riscv64 35/40 Running scriptlet: m4-1.4.18-5.fc28.riscv64 35/40 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 36/40 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 36/40 Installing : tar-2:1.29-7.fc27.riscv64 36/40 Running scriptlet: tar-2:1.29-7.fc27.riscv64 36/40 Installing : emacs-filesystem-1:25.3- [ ] 37/40 Installing : emacs-filesystem-1:25.3- [===== ] 37/40 Installing : emacs-filesystem-1:25.3- [============ ] 37/40 Installing : emacs-filesystem-1:25.3- [=================== ] 37/40 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 37/40 Installing : autoconf-2.69-26.fc28.no [ ] 38/40 Installing : autoconf-2.69-26.fc28.no [= ] 38/40 Installing : autoconf-2.69-26.fc28.no [== ] 38/40 Installing : autoconf-2.69-26.fc28.no [=== ] 38/40 Installing : autoconf-2.69-26.fc28.no [==== ] 38/40 Installing : autoconf-2.69-26.fc28.no [===== ] 38/40 Installing : autoconf-2.69-26.fc28.no [====== ] 38/40 Installing : autoconf-2.69-26.fc28.no [======= ] 38/40 Installing : autoconf-2.69-26.fc28.no [======== ] 38/40 Installing : autoconf-2.69-26.fc28.no [========= ] 38/40 Installing : autoconf-2.69-26.fc28.no [========== ] 38/40 Installing : autoconf-2.69-26.fc28.no [=========== ] 38/40 Installing : autoconf-2.69-26.fc28.no [============ ] 38/40 Installing : autoconf-2.69-26.fc28.no [============= ] 38/40 Installing : autoconf-2.69-26.fc28.no [============== ] 38/40 Installing : autoconf-2.69-26.fc28.no [=============== ] 38/40 Installing : autoconf-2.69-26.fc28.no [================ ] 38/40 Installing : autoconf-2.69-26.fc28.no [================= ] 38/40 Installing : autoconf-2.69-26.fc28.no [================== ] 38/40 Installing : autoconf-2.69-26.fc28.no [=================== ] 38/40 Installing : autoconf-2.69-26.fc28.no [==================== ] 38/40 Installing : autoconf-2.69-26.fc28.no [===================== ] 38/40 Installing : autoconf-2.69-26.fc28.no [====================== ] 38/40 Installing : autoconf-2.69-26.fc28.no [======================= ] 38/40 Installing : autoconf-2.69-26.fc28.no [======================== ] 38/40 Installing : autoconf-2.69-26.fc28.noarch 38/40 Running scriptlet: autoconf-2.69-26.fc28.noarch 38/40 Installing : automake-1.15.1-3.fc28.n [ ] 39/40 Installing : automake-1.15.1-3.fc28.n [= ] 39/40 Installing : automake-1.15.1-3.fc28.n [== ] 39/40 Installing : automake-1.15.1-3.fc28.n [=== ] 39/40 Installing : automake-1.15.1-3.fc28.n [==== ] 39/40 Installing : automake-1.15.1-3.fc28.n [===== ] 39/40 Installing : automake-1.15.1-3.fc28.n [====== ] 39/40 Installing : automake-1.15.1-3.fc28.n [======= ] 39/40 Installing : automake-1.15.1-3.fc28.n [======== ] 39/40 Installing : automake-1.15.1-3.fc28.n [========= ] 39/40 Installing : automake-1.15.1-3.fc28.n [========== ] 39/40 Installing : automake-1.15.1-3.fc28.n [=========== ] 39/40 Installing : automake-1.15.1-3.fc28.n [============ ] 39/40 Installing : automake-1.15.1-3.fc28.n [============= ] 39/40 Installing : automake-1.15.1-3.fc28.n [============== ] 39/40 Installing : automake-1.15.1-3.fc28.n [=============== ] 39/40 Installing : automake-1.15.1-3.fc28.n [================ ] 39/40 Installing : automake-1.15.1-3.fc28.n [================= ] 39/40 Installing : automake-1.15.1-3.fc28.n [================== ] 39/40 Installing : automake-1.15.1-3.fc28.n [=================== ] 39/40 Installing : automake-1.15.1-3.fc28.n [==================== ] 39/40 Installing : automake-1.15.1-3.fc28.n [===================== ] 39/40 Installing : automake-1.15.1-3.fc28.n [====================== ] 39/40 Installing : automake-1.15.1-3.fc28.n [======================= ] 39/40 Installing : automake-1.15.1-3.fc28.n [======================== ] 39/40 Installing : automake-1.15.1-3.fc28.noarch 39/40 Running scriptlet: automake-1.15.1-3.fc28.noarch 39/40 Installing : libtool-2.4.6-21.fc27.ri [ ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [= ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [=== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [==== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [===== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [====== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [======= ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [======== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [========= ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [========== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [============ ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [============= ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [============== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [================ ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [================= ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [================== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 40/40 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 40/40 Installing : libtool-2.4.6-21.fc27.riscv64 40/40 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 40/40 Verifying : autoconf-2.69-26.fc28.noarch 1/40 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 2/40 Verifying : automake-1.15.1-3.fc28.noarch 3/40 Verifying : libtool-2.4.6-21.fc27.riscv64 4/40 Verifying : tar-2:1.29-7.fc27.riscv64 5/40 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 6/40 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 7/40 Verifying : perl-File-Path-2.15-1.fc27.noarch 8/40 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 9/40 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 10/40 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 11/40 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 12/40 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 13/40 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 14/40 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 15/40 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 16/40 Verifying : perl-threads-1:2.21-1.fc27.riscv64 17/40 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 18/40 Verifying : m4-1.4.18-5.fc28.riscv64 19/40 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 20/40 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 21/40 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 22/40 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 23/40 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 24/40 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 25/40 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 26/40 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 27/40 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 28/40 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 29/40 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 30/40 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 31/40 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 32/40 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 33/40 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 34/40 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 35/40 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 36/40 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 37/40 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 38/40 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 39/40 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 40/40 Installed: autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 libtool.riscv64 2.4.6-21.fc27 emacs-filesystem.noarch 1:25.3-5.fc28 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 tar.riscv64 2:1.29-7.fc27 Complete! + dnf -y update --best Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.0 MB/s | 936 kB 00:03 ETA Local RPMS 14% [==- ] 3.0 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 3.0 MB/s | 2.7 MB 00:02 ETA Local RPMS 33% [======- ] 3.1 MB/s | 3.8 MB 00:02 ETA Local RPMS 42% [======== ] 3.1 MB/s | 4.8 MB 00:02 ETA Local RPMS 51% [========== ] 3.1 MB/s | 5.8 MB 00:01 ETA Local RPMS 59% [===========- ] 2.9 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 2.9 MB/s | 7.7 MB 00:01 ETA Local RPMS 76% [=============== ] 3.0 MB/s | 8.7 MB 00:00 ETA Local RPMS 85% [================= ] 3.0 MB/s | 9.7 MB 00:00 ETA Local RPMS 93% [==================- ] 3.0 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:21 ago on Wed Feb 21 17:32:42 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:01:51 ago on Wed Feb 21 17:32:42 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group xz fedora-release coreutils findutils rpm-build shadow-utils which tar bash make info gawk patch unzip grep util-linux bzip2 redhat-rpm-config sed cpio diffutils gzip ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 30 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/30): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/30): redhat-rpm-config-96-1.fc28.0.riscv64.n 781 kB/s | 75 kB 00:00 (2-3/30): diffutils- 1% [ ] 1.6 MB/s | 235 kB 00:07 ETA (2/30): nim-srpm-macros-1-1.fc28.noarch.rpm 306 kB/s | 7.6 kB 00:00 (3-4/30): diffutils- 2% [ ] 1.6 MB/s | 274 kB 00:07 ETA (3/30): ocaml-srpm-macros-5-2.fc27.noarch.rpm 305 kB/s | 7.8 kB 00:00 (4-5/30): diffutils- 2% [- ] 1.6 MB/s | 314 kB 00:07 ETA (4/30): openblas-srpm-macros-2-2.fc27.noarch.rp 257 kB/s | 6.6 kB 00:00 (5-6/30): diffutils- 2% [- ] 1.6 MB/s | 353 kB 00:07 ETA (5/30): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 352 kB/s | 9.0 kB 00:00 (6-7/30): diffutils- 3% [- ] 1.6 MB/s | 394 kB 00:07 ETA (6/30): rust-srpm-macros-5-1.fc28.noarch.rpm 314 kB/s | 8.0 kB 00:00 (7-8/30): diffutils- 3% [- ] 1.6 MB/s | 434 kB 00:07 ETA (7/30): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 913 kB/s | 235 kB 00:00 (8-9/30): make-4.2.1 9% [=- ] 1.6 MB/s | 1.1 MB 00:06 ETA (8/30): make-4.2.1-6.fc27.riscv64.rpm 583 kB/s | 486 kB 00:00 (9-10/30): zstd-1.3. 11% [== ] 1.6 MB/s | 1.4 MB 00:06 ETA (9/30): which-2.21-4.fc28.riscv64.rpm 723 kB/s | 65 kB 00:00 (10-11/30): zstd-1.3 13% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (10/30): diffutils-3.6-3.fc28.riscv64.rpm 531 kB/s | 577 kB 00:01 (11-12/30): patch-2. 13% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (11/30): patch-2.7.5-6.fc27.riscv64.rpm 687 kB/s | 270 kB 00:00 (12-13/30): unzip-6. 20% [==== ] 1.6 MB/s | 2.4 MB 00:05 ETA (12/30): unzip-6.0-36.fc28.riscv64.rpm 793 kB/s | 398 kB 00:00 (13-14/30): zstd-1.3 23% [====- ] 1.7 MB/s | 2.8 MB 00:05 ETA (13/30): xz-5.2.3-5.fc28.riscv64.rpm 645 kB/s | 212 kB 00:00 (14-15/30): zstd-1.3 25% [===== ] 1.7 MB/s | 3.0 MB 00:05 ETA (14/30): bzip2-1.0.6-24.fc28.riscv64.rpm 473 kB/s | 81 kB 00:00 (15-16/30): zstd-1.3 25% [===== ] 1.6 MB/s | 3.1 MB 00:05 ETA (15/30): file-5.32-3.fc28.riscv64.rpm 651 kB/s | 81 kB 00:00 (16-17/30): zstd-1.3 28% [=====- ] 1.6 MB/s | 3.3 MB 00:05 ETA (16-18/30): elfutils 35% [======= ] 1.7 MB/s | 4.1 MB 00:04 ETA (16/30): zstd-1.3.3-1.fc27.riscv64.rpm 639 kB/s | 1.1 MB 00:01 (17-18/30): binutils 37% [=======- ] 1.7 MB/s | 4.4 MB 00:04 ETA (17/30): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 487 kB/s | 14 kB 00:00 (18-19/30): binutils 37% [=======- ] 1.7 MB/s | 4.5 MB 00:04 ETA (18/30): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 522 kB/s | 15 kB 00:00 (19-20/30): binutils 38% [=======- ] 1.7 MB/s | 4.5 MB 00:04 ETA (19/30): pkgconf-1.4.1-1.fc27.riscv64.rpm 592 kB/s | 35 kB 00:00 (20-21/30): binutils 39% [=======- ] 1.7 MB/s | 4.7 MB 00:04 ETA (20/30): libpkgconf-1.4.1-1.fc27.riscv64.rpm 751 kB/s | 74 kB 00:00 (21-22/30): binutils 41% [======== ] 1.7 MB/s | 4.9 MB 00:04 ETA (21/30): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 267 kB/s | 7.5 kB 00:00 (22-23/30): binutils 41% [======== ] 1.7 MB/s | 4.9 MB 00:04 ETA (22/30): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 311 kB/s | 8.2 kB 00:00 (23-24/30): binutils 42% [======== ] 1.6 MB/s | 5.0 MB 00:04 ETA (23/30): gnat-srpm-macros-4-5.fc28.noarch.rpm 339 kB/s | 8.8 kB 00:00 (24-25/30): binutils 42% [======== ] 1.6 MB/s | 5.0 MB 00:04 ETA (24/30): go-srpm-macros-2-11.fc28.noarch.rpm 293 kB/s | 8.4 kB 00:00 (25-26/30): binutils 42% [========- ] 1.6 MB/s | 5.0 MB 00:04 ETA (25/30): perl-srpm-macros-1-26.fc28.noarch.rpm 380 kB/s | 9.7 kB 00:00 (26-27/30): binutils 43% [========- ] 1.6 MB/s | 5.1 MB 00:04 ETA (26/30): python-srpm-macros-3-26.fc28.noarch.rp 393 kB/s | 10 kB 00:00 (27-28/30): binutils 43% [========- ] 1.6 MB/s | 5.1 MB 00:04 ETA (27/30): elfutils-0.170-4.fc28.riscv64.rpm 515 kB/s | 791 kB 00:01 (28-29/30): dwz-0.12 44% [========- ] 1.6 MB/s | 5.3 MB 00:04 ETA (28/30): dwz-0.12-5.fc28.riscv64.rpm 412 kB/s | 108 kB 00:00 (29-30/30): zip-3.0- 46% [========= ] 1.6 MB/s | 5.4 MB 00:04 ETA (29/30): zip-3.0-20.fc28.riscv64.rpm 1.0 MB/s | 271 kB 00:00 (30/30): binutils-2. 49% [=========- ] 1.6 MB/s | 5.9 MB 00:03 ETA (30/30): binutils-2. 56% [=========== ] 1.7 MB/s | 6.7 MB 00:03 ETA (30/30): binutils-2. 63% [============- ] 1.7 MB/s | 7.5 MB 00:02 ETA (30/30): binutils-2. 70% [============== ] 1.8 MB/s | 8.3 MB 00:01 ETA (30/30): binutils-2. 77% [===============- ] 1.9 MB/s | 9.2 MB 00:01 ETA (30/30): binutils-2. 84% [================- ] 1.9 MB/s | 10 MB 00:00 ETA (30/30): binutils-2. 91% [================== ] 2.0 MB/s | 11 MB 00:00 ETA (30/30): binutils-2. 99% [===================-] 2.0 MB/s | 12 MB 00:00 ETA (30/30): binutils-2.30-1.fc28.riscv64.rpm 1.5 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.7 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/30 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/30 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 1/30 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv64 2/30 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 3/30 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 4/30 Installing : python-srpm-macros-3-26. [ ] 5/30 Installing : python-srpm-macros-3-26. [======================= ] 5/30 Installing : python-srpm-macros-3-26.fc28.noarch 5/30 Installing : perl-srpm-macros-1-26.fc [ ] 6/30 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/30 Installing : perl-srpm-macros-1-26.fc28.noarch 6/30 Installing : go-srpm-macros-2-11.fc28 [ ] 7/30 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/30 Installing : go-srpm-macros-2-11.fc28.noarch 7/30 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/30 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/30 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/30 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/30 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/30 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/30 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/30 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/30 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/30 Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/30 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/30 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.riscv64 12/30 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/30 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/30 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/30 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/30 Installing : pkgconf-pkg-config-1.4.1 [ ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/30 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/30 Installing : binutils-2.30-1.fc28.ris [ ] 15/30 Installing : binutils-2.30-1.fc28.ris [= ] 15/30 Installing : binutils-2.30-1.fc28.ris [== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=== ] 15/30 Installing : binutils-2.30-1.fc28.ris [==== ] 15/30 Installing : binutils-2.30-1.fc28.ris [===== ] 15/30 Installing : binutils-2.30-1.fc28.ris [====== ] 15/30 Installing : binutils-2.30-1.fc28.ris [======= ] 15/30 Installing : binutils-2.30-1.fc28.ris [======== ] 15/30 Installing : binutils-2.30-1.fc28.ris [========= ] 15/30 Installing : binutils-2.30-1.fc28.ris [========== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=========== ] 15/30 Installing : binutils-2.30-1.fc28.ris [============ ] 15/30 Installing : binutils-2.30-1.fc28.ris [============= ] 15/30 Installing : binutils-2.30-1.fc28.ris [============== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=============== ] 15/30 Installing : binutils-2.30-1.fc28.ris [================ ] 15/30 Installing : binutils-2.30-1.fc28.ris [================= ] 15/30 Installing : binutils-2.30-1.fc28.ris [================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [==================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [===================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [====================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [======================= ] 15/30 Installing : binutils-2.30-1.fc28.ris [======================== ] 15/30 Installing : binutils-2.30-1.fc28.riscv64 15/30 Running scriptlet: binutils-2.30-1.fc28.riscv64 15/30 Installing : elfutils-0.170-4.fc28.ri [ ] 16/30 Installing : elfutils-0.170-4.fc28.ri [= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [==== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [===== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [====== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [========= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [========== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=========== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [============ ] 16/30 Installing : elfutils-0.170-4.fc28.ri [============= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [============== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=============== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [================ ] 16/30 Installing : elfutils-0.170-4.fc28.ri [================= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [==================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [===================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [====================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======================= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======================== ] 16/30 Installing : elfutils-0.170-4.fc28.riscv64 16/30 Installing : bzip2-1.0.6-24.fc28.risc [ ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 17/30 Installing : bzip2-1.0.6-24.fc28.riscv64 17/30 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 18/30 Installing : patch-2.7.5-6.fc27.riscv [ ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [==== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [===== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [====== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [========= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [========== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [============ ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [============= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [============== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [================ ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [================= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv64 19/30 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv64 20/30 Installing : rust-srpm-macros-5-1.fc2 [ ] 21/30 Installing : rust-srpm-macros-5-1.fc2 [=== ] 21/30 Installing : rust-srpm-macros-5-1.fc2 [===== ] 21/30 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 21/30 Installing : rust-srpm-macros-5-1.fc28.noarch 21/30 Installing : qt5-srpm-macros-5.10.0-1 [ ] 22/30 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 22/30 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 22/30 Installing : openblas-srpm-macros-2-2 [ ] 23/30 Installing : openblas-srpm-macros-2-2 [================ ] 23/30 Installing : openblas-srpm-macros-2-2.fc27.noarch 23/30 Installing : ocaml-srpm-macros-5-2.fc [ ] 24/30 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 24/30 Installing : ocaml-srpm-macros-5-2.fc27.noarch 24/30 Installing : nim-srpm-macros-1-1.fc28 [ ] 25/30 Installing : nim-srpm-macros-1-1.fc28 [=== ] 25/30 Installing : nim-srpm-macros-1-1.fc28 [===== ] 25/30 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 25/30 Installing : nim-srpm-macros-1-1.fc28.noarch 25/30 Installing : redhat-rpm-config-96-1.f [ ] 26/30 Installing : redhat-rpm-config-96-1.f [== ] 26/30 Installing : redhat-rpm-config-96-1.f [=== ] 26/30 Installing : redhat-rpm-config-96-1.f [========= ] 26/30 Installing : redhat-rpm-config-96-1.f [=========== ] 26/30 Installing : redhat-rpm-config-96-1.f [================= ] 26/30 Installing : redhat-rpm-config-96-1.f [================== ] 26/30 Installing : redhat-rpm-config-96-1.f [=================== ] 26/30 Installing : redhat-rpm-config-96-1.f [===================== ] 26/30 Installing : redhat-rpm-config-96-1.f [====================== ] 26/30 Installing : redhat-rpm-config-96-1.f [======================== ] 26/30 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 26/30 Installing : diffutils-3.6-3.fc28.ris [ ] 27/30 Installing : diffutils-3.6-3.fc28.ris [= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [==== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [===== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [====== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [========= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [========== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=========== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [============ ] 27/30 Installing : diffutils-3.6-3.fc28.ris [============= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [============== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=============== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [================ ] 27/30 Installing : diffutils-3.6-3.fc28.ris [================= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [==================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [===================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [====================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======================= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======================== ] 27/30 Installing : diffutils-3.6-3.fc28.riscv64 27/30 Running scriptlet: diffutils-3.6-3.fc28.riscv64 27/30 Installing : rpm-build-4.14.1-6.fc28. [ ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [= ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [=== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [==== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [===== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [====== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [======= ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [======== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [========= ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [============ ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [============== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [================ ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [================= ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [================== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 28/30 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 28/30 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 28/30 Installing : which-2.21-4.fc28.riscv6 [ ] 29/30 Installing : which-2.21-4.fc28.riscv6 [===== ] 29/30 Installing : which-2.21-4.fc28.riscv6 [=========== ] 29/30 Installing : which-2.21-4.fc28.riscv6 [=============== ] 29/30 Installing : which-2.21-4.fc28.riscv6 [================ ] 29/30 Installing : which-2.21-4.fc28.riscv6 [================= ] 29/30 Installing : which-2.21-4.fc28.riscv6 [================== ] 29/30 Installing : which-2.21-4.fc28.riscv6 [======================== ] 29/30 Installing : which-2.21-4.fc28.riscv64 29/30 Running scriptlet: which-2.21-4.fc28.riscv64 29/30 Installing : make-1:4.2.1-6.fc27.risc [ ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [= ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [=== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [==== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [===== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [====== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [======= ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [======== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [========= ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [========== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [============ ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [============= ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [============== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [================ ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [================= ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [================== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 30/30 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 30/30 Installing : make-1:4.2.1-6.fc27.riscv64 30/30 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 30/30 Verifying : diffutils-3.6-3.fc28.riscv64 1/30 Verifying : make-1:4.2.1-6.fc27.riscv64 2/30 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/30 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/30 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/30 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/30 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/30 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/30 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/30 Verifying : zstd-1.3.3-1.fc27.riscv64 10/30 Verifying : which-2.21-4.fc28.riscv64 11/30 Verifying : patch-2.7.5-6.fc27.riscv64 12/30 Verifying : unzip-6.0-36.fc28.riscv64 13/30 Verifying : xz-5.2.3-5.fc28.riscv64 14/30 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/30 Verifying : elfutils-0.170-4.fc28.riscv64 16/30 Verifying : file-5.32-3.fc28.riscv64 17/30 Verifying : binutils-2.30-1.fc28.riscv64 18/30 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 19/30 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 20/30 Verifying : pkgconf-1.4.1-1.fc27.riscv64 21/30 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 22/30 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 23/30 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 24/30 Verifying : gnat-srpm-macros-4-5.fc28.noarch 25/30 Verifying : go-srpm-macros-2-11.fc28.noarch 26/30 Verifying : perl-srpm-macros-1-26.fc28.noarch 27/30 Verifying : python-srpm-macros-3-26.fc28.noarch 28/30 Verifying : dwz-0.12-5.fc28.riscv64 29/30 Verifying : zip-3.0-20.fc28.riscv64 30/30 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:03:46 ago on Wed Feb 21 17:32:42 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 422 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 524 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-heade 36% [======= ] 668 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 799 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 725 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 87% [=================- ] 863 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 941 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 872 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 980 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off