Specification: Microprofile Fault Tolerance Version: 2.0.4-RC4 Status: Draft Release: May 20, 2020 Copyright (c) 2016-2017 Eclipse Microprofile Contributors: Emily Jiang Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
1. Architecture
This specification defines an easy to use and flexible system for building resilient applications.
1.1. Rational
It is increasingly important to build fault tolerant microservices. Fault tolerance is about leveraging different strategies to guide the execution and result of some logic. Retry policies, bulkheads, and circuit breakers are popular concepts in this area. They dictate whether and when executions should take place, and fallbacks offer an alternative result when an execution does not complete successfully.
As mentioned above, the Fault Tolerance specification is to focus on the following aspects:
-
Timeout: Define a duration for timeout -
Retry: Define a criteria on when to retry -
Fallback: provide an alternative solution for a failed execution. -
CircuitBreaker: offer a way of fail fast by automatically failing execution to prevent the system overloading and indefinite wait or timeout by the clients. -
Bulkhead: isolate failures in part of the system while the rest part of the system can still function.
The main design is to separate execution logic from execution. The execution can be configured with fault tolerance policies, such as RetryPolicy, fallback, Bulkhead and CircuitBreaker.
Hystrix and Failsafe are two popular libraries for handling failures. This specification is to define a standard API and approach for applications to follow in order to achieve the fault tolerance.
This specification introduces the following interceptor bindings:
-
Timeout -
Retry -
Fallback -
CircuitBreaker -
Bulkhead -
Asynchronous
Refer to Interceptor Specification for more information.
2. Relationship to other specifications
This specification defines a set of annotations to be used by classes or methods. The annotations are interceptor bindings. Therefore, this specification depends on the Java Interceptors and Contexts and Dependency Injection specifications define in Java EE platform.
2.1. Relationship to Contexts and Dependency Injection
The Contexts and Dependency Injection (CDI) specification defines a powerful component model to enable loosely coupled architecture design. This specification explores the rich SPI provided by CDI to register an interceptor so that the Fault Tolerance policies can be applied to the method invocation.
2.2. Relationship to Java Interceptors
The Java Interceptors specification defines the basic programming model and semantics for interceptors.
This specification uses the typesafe interceptor bindings.
The annotations @Asynchronous, @Bulkhead, @CircuitBreaker, @Fallback, @Retry and @Timeout are all interceptor bindings.
These annotations may be bound at the class level or method level. The annotations adhere to the interceptor binding rules defined by Java Interceptors specification.
For instance, if the annotation is bound to the class level, it applies to all business methods of the class. If the component class declares or inherits a class level interceptor binding, it must not be declared final, or have any static, private, or final methods. If a non-static, non-private method of a component class declares a method level interceptor binding, neither the method nor the component class may be declared final.
Since this specification depends on CDI and interceptors specifications, fault tolerance operations have the following restrictions:
-
Fault tolerance interceptors bindings must applied on a bean class or bean class method otherwise it is ignored,
-
invocation must be business method invocation as defined in CDI specification.
-
if a method and its containing class don’t have any fault tolerance interceptor binding, it won’t be considered as a fault tolerance operation.
2.3. Relationship to MicroProfile Config
The MicroProfile config specification defines a flexible config model to enable microservice
configurable and achieve the strict separation of config from code. All parameters on the
annotations/interceptor bindings are config properties. They can be configured externally either
via other predefined config sources (e.g. environment variables, system properties or other sources). For an instance,
the maxRetries parameter on the @Retry annotation is a configuration property. It can be configured externally.
2.4. Relationship to MicroProfile Metrics
The MicroProfile Metrics specification provides a way to monitor microservice invocations. It is also important to find out how Fault Tolerance policies are operating, e.g.
-
When
Retryis used, it is useful to know how many times a method was called and succeeded after retrying at least once. -
When
Timeoutis used, you would like to know how many times the method timed out.
Because of this requirement, when Microprofile Fault Tolerance and Microprofile Metrics are used together, metrics are automatically added for each of the methods annotated with a @Retry, @Timeout, @CircuitBreaker, @Bulkhead or @Fallback annotation.
3. Fault Tolerance Interceptor(s)
The implementor of the MicroProfile Fault Tolerance specification must provide one or more Fault Tolerance interceptors. The interceptor(s) provide the functionality for Fault Tolerance annotations. The interceptor(s) will be called if one or more Fault Tolerance annotations are specified. For instance, a Fault Tolerance interceptor will retry the specified operation if the Retry annotation is specified on that operation. The base priority of the lowest priority Fault Tolerance interceptor is Priority.PLATFORM_AFTER+10, which is 4010. If more than one Fault Tolerance interceptor is provided by an implementation, the priority number taken by Fault Tolerance interceptor(s) should be in the range of [base, base+40].
The Fault Tolerance interceptor base priority can be configured via MicroProfile Config with the property name of mp.fault.tolerance.interceptor.priority. The property value will only be read at application startup. Any subsequent value changes will not take effect until the application restarts.
A method, annotated with any of the Fault Tolerance interceptor bindings, may also be annotated with other interceptor bindings. The bound interceptors will be invoked in ascending order of interceptor priority, as specified by Interceptor Specification. If the appliction interceptors are enabled via beans.xml, the interceptors enabled via beans.xml will be invoked after the Fault Tolerance interceptor. For more details, refer to Interceptor ordering in CDI specification.
For instance, in the following example, MyLogInterceptor will be invoked first, followed by a Fault Tolerance interceptor that does Retry capability, and then MyPrintInterceptor.
@Retry
@MyLog
@MyPrint
public void myInvok() {
//do something
}
@Priority(3000)
@MyLog
public class MyLogInterceptor{
//do logging
}
@Priority(5000)
@MyPrint
public class MyPrintInterceptor{
//do printing
}4. Execution
Use interceptor and annotation to specify the execution and policy configuration.
The annotation Asynchronous has to be specified for any asynchronous calls.
Otherwise, synchronous execution is assumed.
5. Asynchronous
Asynchronous means the execution of the client request will be on a separate thread.
This thread should have the correct security context or naming context associated with it.
5.1. Asynchronous Usage
A method or a class can be annotated with @Asynchronous, which means the method or the methods under the class will be invoked by a separate thread.
The method annotated with @Asynchronous must return a Future or a CompletionStage from the java.util.concurrent package. Otherwise, a FaultToleranceDefinitionException occurs.
When a method annotated with @Asynchronous is invoked, it immediately returns a Future or CompletionStage. The execution of the any remaining interceptors and the method body will then take place on a separate thread.
-
Until the execution has finished, the
FutureorCompletionStagewhich was returned will be incomplete. -
If the execution throws an exception, the
FutureorCompletionStagewill be completed with that exception. (I.e.Future.get()will throw anExecutionExceptionwhich wraps the thrown exception and any functions passed toCompletionStage.exceptionally()will run.) -
If the execution completes normally and returns a value, the
FutureorCompletionStagewill then delegate to the returned value.
@Asynchronous
public CompletionStage<Connection> serviceA() {
Connection conn = null;
counterForInvokingServiceA++;
conn = connectionService();
return CompletableFuture.completedFuture(conn);
}The above code-snippet means that the Asynchronous policy is applied to the serviceA method, which means that a call to serviceA will return a CompletionStage immediately and that execution of the method body will be done on a different thread.
5.2. Interactions with other Fault Tolerance annotations
The @Asynchronous annotation can be used together with @Timeout, @Fallback, @Bulkhead, @CircuitBreaker and @Retry.
In this case, the method invocation and any fault tolerance processing will occur in a different thread. The returned Future or CompletionStage will be completed with the final result once all other Fault Tolerance processing has been completed. However, the two different return types have some differences.
5.2.1. Interactions when returning a Future
If a method returns a Future, the other Fault Tolerance annotations are applied only around the method invocation regardless of whether the returned Future completes exceptionally or not. In more detail:
-
If the method invocation throws an exception, this will trigger other specified Fault Tolerance policies to be applied.
-
If the method returns a
Future, then the method call is considered to be successful, which will not trigger other Fault Tolerance policies to be applied even if specified.
In the following example, the Retry will not be triggered as the method invocation returns normally.
@Asynchronous
@Retry
public Future<Connection> serviceA() {
CompletableFuture<U> future = new CompletableFuture<>();
future.completeExceptionally(new RuntimeException("Failure"));
return future;
}5.2.2. Interactions when returning a CompletionStage
If the method returns CompletionStage, the other specified Fault Tolerance annotations will be triggered if either an exception is thrown from the method call or the returned CompletionStage completes exceptionally. In more detail:
-
If the method invocation throws an exception, this will trigger other specified Fault Tolerance policies to be applied.
-
If the method returns a
CompletionStage, then the method call is considered to be successful only if theCompletionStagecompletes successfully. If an exceptionally completedCompletionStageis returned, or if an incompleteCompletionStageis returned which later completes exceptionally, then this will cause other specified Fault Tolerance policies to be applied.
In the following example, the Retry will be triggered as the returned CompletionStage completes exceptionally.
@Asynchronous
@Retry
public CompletionStage<Connection> serviceA() {
CompletableFuture<U> future = new CompletableFuture<>();
future.completeExceptionally(new RuntimeException("Failure"));
return future;
}The above behaviour makes it easier to apply Fault Tolerance logic around a CompletionStage which was returned by another component, e.g. applying @Asynchronous, @Retry and @Timeout to a JAX-RS client call.
It is apparent that when using @Asynchronous, it is much more desirable to specify the return type CompletionStage over Future to maximise the usage of Fault Tolerance.
5.3. Exception Handling
A call to a method annotated with @Asynchronous will never throw an exception directly. Instead, the returned Future or CompletionStage will report that its task failed with the exception which would have been thrown.
For example, if @Asynchronous is used with @Bulkhead on a method which returns a Future and the bulkhead queue is full when the method is called, the method will return a Future where calling isDone() returns true and calling get() will throw an ExecutionException which wraps a BulkheadException.
6. Timeout
Timeout prevents from the execution from waiting forever.
It is recommended that a microservice invocation should have timeout associated with.
6.1. Timeout Usage
A method or a class can be annotated with @Timeout, which means the method or the methods under the class will have Timeout policy applied.
@Timeout(400) // timeout is 400ms
public Connection serviceA() {
Connection conn = null;
counterForInvokingServiceA++;
conn = connectionService();
return conn;
}The above code-snippet means the method serviceA applies the Timeout policy,
which is to fail the execution if the execution takes more than 400ms to complete even if it successfully returns.
When a timeout occurs, A TimeoutException must be thrown.
The @Timeout annotation can be used together with @Fallback, @CircuitBreaker, @Asynchronous, @Bulkhead and @Retry.
When @Timeout is used without @Asynchronous, the current thread will be interrupted with a call to Thread.interrupt() on reaching the specified timeout duration. The interruption will only work in certain scenarios. The interruption will not work for the following situations:
-
The thread is blocked on blocking I/O (database, file read/write), an exception is thrown only in case of waiting for a NIO channel
-
The thread isn’t waiting (CPU intensive task) and isn’t checking for being interrupted
-
The thread will catch the interrupted exception (with a general catch block) and will just continue processing, ignoring the interrupt
In the above situations, it is impossible to suspend the execution. The execution thread will finish its process. If the execution takes longer than the specified timeout, the TimeoutException will be thrown and the execution result will be discarded.
If a timeout occurs, the thread interrupted status must be cleared when the method returns.
If @Timeout is used with @Asynchronous, then a separate thread will be spawned to perform the work in the annotated method or methods, while a Future or CompletionStage is returned on the main thread. If the work on the spawned thread does time out, then a get() call to the Future on the main thread will throw an ExecutionException that wraps a fault tolerance TimeoutException.
If @Timeout is used with @Fallback then the fallback method or handler will be invoked if a TimeoutException is thrown (unless the exception is handled by another fault tolerance component).
If @Timeout is used with @Retry, a TimeoutException may trigger a retry, depending on the values of retryOn and abortOn of the @Retry annotation. The timeout is restarted for each retry. If @Asynchronous is also used and the retry is the result of a TimeoutException, the retry starts after any delay period, even if the original attempt is still running.
If @Timeout is used with @CircuitBreaker, a TimeoutException may be counted as a failure by the circuit breaker and contribute towards opening the circuit, depending on the value of failOn on the @CircuitBreaker annotation.
If @Timeout is used with @Bulkhead and @Asynchronous, the execution time measured by @Timeout should be the period starting when the execution is added to the Bulkhead queue, until the execution completes. If a timeout occurs while the execution is still in the queue, it must be removed from the queue and must not be started. If a timeout occurs while the method is executing, the thread where the method is executing must be interrupted but the method must still count as a running concurrent request for the Bulkhead until it actually returns.
7. Retry Policy
In order to recover from a brief network glitch, @Retry can be used to invoke the same operation again.
The Retry policy allows to configure :
-
maxRetries: the maximum retries -
delay: delays between each retry -
delayUnit: the delay unit -
maxDuration: maximum duration to perform the retry for. -
durationUnit: duration unit -
jitter: the random vary of retry delays -
jitterDelayUnit: the jitter unit -
retryOn: specify the failures to retry on -
abortOn: specify the failures to abort on
7.1. Retry usage
@Retry can be applied to the class or method level.
If applied to a class, it means the all methods in the class will have the @Retry policy applied.
If applied to a method, it means that method will have @Retry policy applied.
If the @Retry policy applied on a class level and on a method level within that class, the method level @Retry will override the class-level @Retry policy for that particular method.
/**
* The configured the max retries is 90 but the max duration is 1000ms.
* Once the duration is reached, no more retries should be performed,
* even through it has not reached the max retries.
*/
@Retry(maxRetries = 90, maxDuration= 1000)
public void serviceB() {
writingService();
}
/**
* There should be 0-800ms (jitter is -400ms - 400ms) delays
* between each invocation.
* there should be at least 4 retries but no more than 10 retries.
*/
@Retry(delay = 400, maxDuration= 3200, jitter= 400, maxRetries = 10)
public Connection serviceA() {
return connectionService();
}
/**
* There should be 0-400ms delays between each invocation.
* The effective delay will be between:
* [delay - jitter, delay + jitter] and always >= 0. Negative effective delays will be 0.
* There should be at least 8 retries but no more than 10 retries.
*/
@Retry(delay = 0, maxDuration= 3200, jitter= 400, maxRetries = 10)
public Connection serviceA() {
return connectionService();
}
/**
* Sets retry condition, which means Retry will be performed on
* IOException.
*/
@Retry(retryOn = {IOException.class})
public void serviceB() {
writingService();
}The @Retry annotation can be used together with @Fallback, @CircuitBreaker, @Asynchronous, @Bulkhead and @Timeout.
A @Fallback can be specified and it will be invoked if the method still fails after any retires have been run.
If @Retry is used with @Asynchronous and a retry is required, the new retry attempt may be run on the same thread as the previous attempt, or on a different thread.
8. Fallback
A Fallback method is invoked if a method annotated with @Fallback completes exceptionally.
The Fallback annotation can be used on its own or together with other Fault Tolerance annotations. The fallback is invoked if an exception would be thrown after all other Fault Tolerance processing has taken place.
For a Retry, Fallback is handled any time the Retry would exceed its maximum number of attempts.
For a CircuitBreaker, it is invoked any time the method invocation fails. When the Circuit is open, the Fallback is always invoked.
8.1. Fallback usage
A method can be annotated with @Fallback, which means the method will have Fallback policy applied.
There are two ways to specify fallback:
-
Specify a FallbackHandler class
-
Specify the fallbackMethod
8.1.1. Specify a FallbackHandler class
If a FallbackHandler is registered for a method returning a different type than the FallbackHandler would return, then the container should treat as an error and deployment fails.
FallbackHandlers are meant to be CDI managed, and should follow the life cycle of the scope of the bean.
@Retry(maxRetries = 1)
@Fallback(StringFallbackHandler.class)
public String serviceA() {
counterForInvokingServiceA++;
return nameService();
}The above code snippet means when the method failed and retry reaches its maximum retry, the fallback operation will be performed.
The method StringFallbackHandler.handle(ExecutionContext context) will be invoked.
The return type of StringFallbackHandler.handle(ExecutionContext context) must be String.
Otherwise, the FaultToleranceDefinitionException exception will be thrown.
8.1.2. Specify the fallbackMethod
This is used to specify that a named method should be called if a fallback is required.
@Retry(maxRetries = 2)
@Fallback(fallbackMethod= "fallbackForServiceB")
public String serviceB() {
counterForInvokingServiceB++;
return nameService();
}
private String fallbackForServiceB() {
return "myFallback";
}The above code snippet means when the method failed and retry reaches its maximum retry, the fallback operation will be performed.
The method fallbackForServiceB will be invoked.
When fallbackMethod is used a FaultToleranceDefinitionException will be thrown if any of the following constraints are not met:
-
The named fallback method must be on the same class, a superclass or an implemented interface of the class which declares the annotated method
-
The named fallback method must have the same parameter types as the annotated method (after resolving any type variables)
-
The named fallback method must have the same return type as the annotated method (after resolving any type variables)
-
The named fallback method must be accessible from the class which declares the annotated method
The parameter value and fallbackMethod on @Fallback cannot be specified at the same time.
Otherwise, the FaultToleranceDefinitionException exception will be thrown.
The fallback should be triggered when an exception occurs.
For instance, BulkheadException, CircuitBreakerOpenException, TimeoutException should trigger the fallback.
9. Circuit Breaker
A Circuit Breaker prevents repeated failures, so that dysfunctional services or APIs fail fast. There are three circuit states:
-
Closed: In normal operation, the circuit is closed. If a failure occurs, the Circuit Breaker records the event. In closed state the requestVolumeThreshold and failureRatio parameters may be configured in order to specify the conditions under which the breaker will transition the circuit to open. If the failure conditions are met, the circuit will be opened.
-
Open: When the circuit is open, calls to the service operating under the circuit breaker will fail immediately. A delay may be configured for the Circuit Breaker. After the specified delay, the circuit transitions to half-open state.
-
Half-open: In half-open state, trial executions of the service are allowed. By default one trial call to the service is permitted. If the call fails, the circuit will return to open state. The successThreshold parameter allows the configuration of the number of trial executions that must succeed before the circuit can be closed. After the specified number of successful executions, the circuit will be closed. If a failure occurs before the successThreshold is reached the circuit will transition to open.
Note that circuit state transitions will reset the Circuit Breaker’s records. For example, when the circuit transitions to closed a new
rolling failure window is created with the configured requestVolumeThreshold and failureRatio. The circuit state will only be assessed when the rolling window reaches the requestVolumeThreshold.
@CircuitBreaker(successThreshold = 10, requestVolumeThreshold = 4, failureRatio=0.5, delay = 1000)
public Connection serviceA() {
Connection conn = null;
counterForInvokingServiceA++;
conn = connectionService();
return conn;
}Below are a couple scenarios to demonstrate when the circuit opens for the above code snippet.
-
Scenario 1
-
Request 1 - success
-
Request 2 - failure
-
Request 3 - failure
-
Request 4 - success
-
Request 5 - CircuitBreakerOpenException
-
The Request 4 will trigger the circuit to open. The Request 5 will hit the exception.
-
Scenario 2
-
Request 1 - success
-
Request 2 - failure
-
Request 3 - success
-
Request 4 - success
-
Request 5 - failure
-
Request 6 - CircuitBreakerOpenException
-
The Request 5 will trigger the circuit to open. The Request 6 will hit the exception.
9.1. Circuit Breaker Usage
A method or a class can be annotated with @CircuitBreaker, which means the method or the methods under the class will have CircuitBreaker policy applied.
@CircuitBreaker(successThreshold = 10, requestVolumeThreshold = 4, failureRatio=0.75, delay = 1000)
public Connection serviceA() {
Connection conn = null;
counterForInvokingServiceA++;
conn = connectionService();
return conn;
}The above code-snippet means the method serviceA applies the CircuitBreaker policy,
which is to open the circuit once 3 (4x0.75) failures occur among the rolling window of 4 consecutive invocation.
The circuit will stay open for 1000ms and then back to half open.
After 10 consecutive successful invocations, the circuit will be back to close again.
When a circuit is open, A CircuitBreakerOpenException must be thrown.
The @CircuitBreaker annotation can be used together with @Timeout, @Fallback, @Asynchronous, @Bulkhead and @Retry.
If @Fallback is used with @CircuitBreaker, the fallback method or handler will be invoked if a CircuitBreakerOpenException is thrown.
If @Retry is used with @CircuitBreaker, each retry attempt is processed by the circuit breaker and recorded as either a success or a failure. If a CircuitBreakerOpenException is thrown, the execution may be retried, depending on how the @Retry is configured.
If @Bulkhead is used with @Circuitbreaker, the circuit breaker is checked before attempting to enter the bulkhead. If attempting to enter the bulkhead results in a BulkheadException, this may be counted as a failure, depending on the value of the circuit breaker failOn attribute.
10. Bulkhead
The Bulkhead pattern is to prevent faults in one part of the system from cascading to the entire system, which might bring down the whole system.
The implementation is to limit the number of concurrent requests accessing to an instance. Therefore, Bulkhead pattern is only effective when applying @Bulkhead to a component that can be accessed from multiple contexts.
10.1. Bulkhead Usage
A method or class can be annotated with @Bulkhead, which means the method or the methods under the class will have Bulkhead policy applied correspondingly.
There are two different approaches to the bulkhead: thread pool isolation and semaphore isolation.
When @Bulkhead is used with @Asynchronous, the thread pool isolation approach will be used.
If @Bulkhead is used without @Asynchronous, the semaphore isolation approach will be used.
The thread pool approach allows to configure the maximum concurrent requests together with the waiting queue size.
The semaphore approach only allows the concurrent number of requests configuration.
10.1.1. Semaphore style Bulkhead
The below code-snippet means the method serviceA applies the Bulkhead policy with the semaphore approach, limiting the maximum concurrent requests to 5.
@Bulkhead(5) // maximum 5 concurrent requests allowed
public Connection serviceA() {
Connection conn = null;
counterForInvokingServiceA++;
conn = connectionService();
return conn;
}When using the semaphore approach, on reaching maximum request counter, the extra request will fail with BulkheadException.
10.1.2. Thread pool style Bulkhead
The below code-snippet means the method serviceA applies the Bulkhead policy with the thread pool approach, limiting the maximum concurrent requests to 5 and the waiting queue size to 8.
// maximum 5 concurrent requests allowed, maximum 8 requests allowed in the waiting queue
@Asynchronous
@Bulkhead(value = 5, waitingTaskQueue = 8)
public Future<Connection> serviceA() {
Connection conn = null;
counterForInvokingServiceA++;
conn = connectionService();
return CompletableFuture.completedFuture(conn);
}When using the thread pool approach, when a request cannot be added to the waiting queue, BulkheadException will be thrown.
The @Bulkhead annotation can be used together with @Fallback, @CircuitBreaker, @Asynchronous, @Timeout and @Retry.
If a @Fallback is specified, it will be invoked if the BulkheadException is thrown.
If @Retry is used with @Bulkhead, when an invocation fails due to a BulkheadException it is retried after waiting for the delay configured on @Retry. If an invocation is permitted to run by the bulkhead but then throws another exception which is handled by @Retry, it first leaves the bulkhead, reducing the count of running concurrent requests by 1, waits for the delay configured on @Retry, and then attempts to enter the bulkhead again. At this point, it may be accepted, queued (if the method is also annotated with @Asynchronous) or fail with a BulkheadException (which may result in further retries).
11. Integration with Microprofile Metrics
When Microprofile Fault Tolerance and Microprofile Metrics are used together, metrics are automatically added for each of
the methods annotated with a @Retry, @Timeout, @CircuitBreaker, @Bulkhead or @Fallback annotation.
11.1. Names
The automatically added metrics follow a consistent pattern which includes the fully qualified name of the annotated method.
In the tables below, the placeholder <name> should be replaced by the fully qualified method name.
If two methods have the same fully qualified name then the metrics for those methods will be combined. The result of this combination is non-portable and may vary between implementations. For portable behavior, monitored methods in the same class should have unique names.
11.2. Metrics added for @Retry, @Timeout, @CircuitBreaker, @Bulkhead and @Fallback
Implementations must ensure that if any of these annotations are present on a method, then the following metrics are added only once for that method.
| Name | Type | Unit | Description |
|---|---|---|---|
|
Counter |
None |
The number of times the method was called |
|
Counter |
None |
The number of times the method was called and, after all Fault Tolerance actions had been processed, threw a |
11.3. Metrics added for @Retry
| Name | Type | Unit | Description |
|---|---|---|---|
|
Counter |
None |
The number of times the method was called and succeeded without retrying |
|
Counter |
None |
The number of times the method was called and succeeded after retrying at least once |
|
Counter |
None |
The number of times the method was called and ultimately failed after retrying |
|
Counter |
None |
The total number of times the method was retried |
Note that the sum of ft.<name>.retry.callsSucceededNotRetried.total, ft.<name>.retry.callsSucceededRetried.total and ft.<name>.retry.callsFailed.total will give the total number of calls for which the Retry logic was run.
11.4. Metrics added for @Timeout
| Name | Type | Unit | Description |
|---|---|---|---|
|
Histogram |
Nanoseconds |
Histogram of execution times for the method |
|
Counter |
None |
The number of times the method timed out |
|
Counter |
None |
The number of times the method completed without timing out |
Note that the sum of ft.<name>.timeout.callsTimedOut.total and ft.<name>.timeout.callsNotTimedOut.total will give the total number of calls for which the Timeout logic was run. This may be larger than the total number of invocations of the method it’s also annotated with @Retry because the Timeout logic is applied to each Retry attempt, not to the whole method invocation time.
11.5. Metrics added for @CircuitBreaker
| Name | Type | Unit | Description |
|---|---|---|---|
|
Counter |
None |
Number of calls which were allowed to run and were considered a success by the circuit breaker |
|
Counter |
None |
Number of calls which were allowed to run and were considered a failure by the circuit breaker |
|
Counter |
None |
Number of calls which were prevented from running by the circuit breaker |
|
Gauge<Long> |
Nanoseconds |
Amount of time the circuit breaker has spent in open state |
|
Gauge<Long> |
Nanoseconds |
Amount of time the circuit breaker has spent in half-open state |
|
Gauge<Long> |
Nanoseconds |
Amount of time the circuit breaker has spent in closed state |
|
Counter |
None |
Number of times the circuit breaker has moved from closed state to open state |
Note that the sum of ft.<name>.circuitbreaker.callsSucceeded.total, ft.<name>.circuitbreaker.callsFailed.total and ft.<name>.circuitbreaker.callsPrevented.total will give the total number of calls for which the circuit breaker logic was run.
Similarly, the sum of ft.<name>.circuitbreaker.open.total, ft.<name>.circuitbreaker.halfOpen.total and ft.<name>.circuitbreaker.closed.total will give the total time since the circuit breaker was initialized.
11.6. Metrics added for @Bulkhead
| Name | Type | Unit | Description |
|---|---|---|---|
|
Gauge<Long> |
None |
Number of currently running executions |
|
Counter |
None |
Number of calls accepted by the bulkhead |
|
Counter |
None |
Number of calls rejected by the bulkhead |
|
Histogram |
Nanoseconds |
Histogram of the time that executions spend holding a semaphore permit or using one of the threads from the thread pool |
|
Gauge<Long> |
None |
Number of executions currently waiting in the queue |
|
Histogram |
Nanoseconds |
Histogram of the time executions spend waiting in the queue |
*Only added if the method is also annotated with @Asynchronous
11.7. Metrics added for @Fallback
| Name | Type | Unit | Description |
|---|---|---|---|
|
Counter |
None |
Number of times the fallback handler or method was called |
11.8. Notes
Metrics added by this specification will appear as application metrics for the application which uses the Fault Tolerance annotations.
Future versions of this specification may change the definitions of the metrics which are added to take advantage of enhancements in the MicroProfile Metrics specification.
If more than one annotation is applied to a method, the metrics associated with each annotation will be added for that method.
All of the counters count the number of events which occurred since the application started, and therefore never decrease. It is expected that these counters will be sampled regularly by monitoring software which is then able to compute deltas or moving averages from the gathered samples.
11.9. Annotation Example
package com.exmaple;
@Timeout(1000)
public class MyClass {
@Retry
public void doWork() {
// work
}
}This class would result in the following metrics being added.
-
ft.com.example.MyClass.doWork.invocations.total -
ft.com.example.MyClass.doWork.invocations.failed -
ft.com.example.MyClass.doWork.retry.callsSucceededNotRetried.total -
ft.com.example.MyClass.doWork.retry.callsSucceededRetried.total -
ft.com.example.MyClass.doWork.retry.callsFailed.total -
ft.com.example.MyClass.doWork.retry.retries.total -
ft.com.example.MyClass.doWork.timeout.executionDuration -
ft.com.example.MyClass.doWork.timeout.callsTimedOut.total -
ft.com.example.MyClass.doWork.timeout.callsNotTimedOut.total
Now imagine the doWork() method is called and the invocation goes like this:
-
On the first attempt, the invocation takes more than 1000ms and times out
-
On the second attempt, something goes wrong and the method throws an
IOException -
On the third attempt, the method returns successfully and the result of this attempt is returned to the user
After this sequence, the value of these metrics would be as follows:
ft.com.example.MyClass.doWork.invocations.total = 1
The method has been called once.
ft.com.example.MyClass.doWork.invocations.failed = 0
No exceptions were propagated back to the caller.
ft.com.example.MyClass.doWork.retry.callsSucceededNotRetried.total = 0
ft.com.example.MyClass.doWork.retry.callsSucceededRetried.total = 1
ft.com.example.MyClass.doWork.retry.callsFailed.total = 0
Only one call was made, and it succeeded after some retries.
ft.com.example.MyClass.doWork.retry.retries.total = 2
Two retries were made during the invocation.
ft.com.example.MyClass.doWork.timeout.executionDuration
The Histogram will have been updated with the length of time taken for each attempt. It will show a count of 3 and will have calculated averages and percentiles from the execution times.
ft.com.example.MyClass.doWork.timeout.callsTimedOut.total = 1
One of the attempts timed out.
ft.com.example.MyClass.doWork.timeout.callsNotTimedOut.total = 2
Two of the attempts did not time out.
12. Fault Tolerance configuration
This specification defines the programming model to build a resilient microservice. Microservices developed using this feature are guaranteed to be resilient despite of running environments.
This programming model is very flexible. All the annotation parameters are configurable and the annotations can be disabled as well.
12.1. Config Fault Tolerance parameters
This specification defines the annotations: @Asynchronous, @Bulkhead, @CircuitBreaker, @Fallback, @Retry and @Timeout.
Each annotation except @Asynchronous has parameters.
All of the parameters are configurable.
The value of each parameter can be overridden individually or globally.
-
Override individual parameters The annotation parameters can be overwritten via config properties in the naming convention of
<classname>/<methodname>/<annotation>/<parameter>.
The <classname> and <methodname> must be the class name and method name where the annotation is declared upon.
In the following code snippet, in order to override the maxRetries for serviceB invocation to 100, set the config property com.acme.test.MyClient/serviceB/Retry/maxRetries=100
Similarly to override the maxDuration for ServiceA, set the config property
com.acme.test.MyClient/serviceA/Retry/maxDuration=3000
-
Override parameters globally
If the parameters for a particular annotation need to be configured with the same value for a particular class, use the config property <classname>/<annotation>/<parameter> for configuration.
For an instance, use the following config property to override all maxRetries for Retry specified on the class MyClient to 100.
com.acme.test.MyClient/Retry/maxRetries=100
Sometimes, the parameters need to be configured with the same value for the whole microservice.
For an instance, all Timeout needs to be set to 100ms.
It can be cumbersome to override each occurrence of Timeout.
In this circumstance, the config property <annotation>/<parameter> overrides the corresponding parameter value for the specified annotation.
For instance, in order to override the maxRetries for the Retry to be 30, specify the config property Retry/maxRetries=30.
When multiple config properties are present, the property <classname>/<methodname>/<annotation>/<parameter> takes precedence over <classname>/<annotation>/<parameter>, which is followed by <annotation>/<parameter>.
The override just changes the value of the corresponding parameter specified in the microservice and nothing more.
If no annotation matches the specified parameter, the property will be ignored.
For instance, if the annotation Retry is specified on the class level for the class com.acme.ClassA, which has method methodB, the config property com.acme.ClassA/methodB/Retry/maxRetries will be ignored.
In order to override the property, the config property com.acme.ClassA/Retry/maxRetries or Retry/maxRetries needs to be specified.
package come.acme.test;
public class MyClient{
/**
* The configured the max retries is 90 but the max duration is 1000ms.
* Once the duration is reached, no more retries should be performed,
* even through it has not reached the max retries.
*/
@Retry(maxRetries = 90, maxDuration= 1000)
public void serviceB() {
writingService();
}
/**
* There should be 0-800ms (jitter is -400ms - 400ms) delays
* between each invocation.
* there should be at least 4 retries but no more than 10 retries.
*/
@Retry(delay = 400, maxDuration= 3200, jitter= 400, maxRetries = 10)
public Connection serviceA() {
return connectionService();
}
/**
* Sets retry condition, which means Retry will be performed on
* IOException.
*/
@Retry(retryOn = {IOException.class})
public void serviceB() {
writingService();
}
}If an annotation is not present, the configured properties are ignored.
For instance, the property com.acme.ClassA/methodB/Retry/maxRetries will be ignored if @Retry annotation is not specified on the methodB of com.acme.ClassA.
Similarly, the property com.acme.ClassA/Retry/maxRetries will be ignored if @Retry annotation is not specified on the class com.acme.ClassA as a class-level annotation.
12.2. Disable a group of Fault Tolerance annotations on the global level
Some service mesh platforms, e.g. Istio, have their own Fault Tolerance policy.
The operation team might want to use the platform Fault Tolerance.
In order to fulfil the requirement, MicroProfile Fault Tolerance provides a capability to have its resilient functionalities disabled except fallback.
The reason fallback is special is that the fallback business logic can only be defined by microservices and not by any other platforms.
Setting the config property of MP_Fault_Tolerance_NonFallback_Enabled with the value of false means the Fault Tolerance is disabled, except @Fallback.
If the property is absent or with the value of true, it means that MicroProfile Fault Tolerance is enabled if any annotations are specified. For more information about how to set config properties, refer to MicroProfile Config specification.
In order to prevent from any unexpected behaviours, the property MP_Fault_Tolerance_NonFallback_Enabled will only be read on application starting.
Any dynamic changes afterwards will be ignored until the application restarting.
12.3. Disabled individual Fault Tolerance policy
Fault Tolerance policies can be disabled with configuration at method level, class level or globally for all deployment. If multiple configurations are specified, method-level configuration overrides class-level configuration, which then overrides global configuration. e.g.
-
com.acme.test.MyClient/methodA/CircuitBreaker/enabled=false -
com.acme.test.MyClient/CircuitBreaker/enabled=true -
CircuitBreaker/enabled=false
For the above scenario, all occurrences of CircuitBreaker for the application are disabled except for those on the class com.acme.test.MyClient. All occurrences of CircuitBreaker on com.acme.test.MyClient are enabled, except for the one on methodA which is disabled.
Each policy can be disabled by using its annotation name.
-
Disabling a policy at Method level
A policy can be disabled at method level with the following config property and value:
<classname>/<methodname>/<annotation>/enabled=false
For instance the following config will disable circuit breaker policy on methodA of com.acme.test.MyClient class:
com.acme.test.MyClient/methodA/CircuitBreaker/enabled=false
Policy will be disabled even if the policy is also defined at class level
-
Disabling a policy at class level
A policy can be disabled at class level with the following config property and value:
<classname>/<annotation>/enabled=false
For instance the following config will disable fallback policy on com.acme.test.MyClient class:
com.acme.test.MyClient/Fallback/enabled=false
Policy will be disabled on all class methods even if a method has the policy.
-
Disabling a policy globally
A policy can be disabled globally with the following config property and value:
<annotation>/enabled=false
For instance the following config will disable bulkhead policy globally:
Bulkhead/enabled=false
Policy will be disabled everywhere ignoring existing policy annotations on methods and classes.
If the above configurations patterns are used with a value other than true or false (i.e. <classname>/<methodname>/<annotation>/enabled=whatever) non-portable behaviour results.
When the above property is used together with the property MP_Fault_Tolerance_NonFallback_Enabled, the property MP_Fault_Tolerance_NonFallback_Enabled has the lowest priority. e.g.
-
MP_Fault_Tolerance_NonFallback_Enabled=true -
Bulkhead/enabled=true
In the above example, only Fallback and Bulkhead are enabled while the others are disabled.
12.4. Configuring Metrics Integration
The integration with MicroProfile Metrics can be disabled by setting a config property named MP_Fault_Tolerance_Metrics_Enabled to the value false.
If this property is absent or set to true then the integration with MicroProfile Metrics will be enabled and the metrics listed earlier in this specification
will be added automatically for every method annotated with a @Retry, @Timeout, @CircuitBreaker, @Bulkhead or @Fallback annotation.
In order to prevent any unexpected behaviour, the property MP_Fault_Tolerance_Metrics_Enabled will only be read when the application starts.
Any dynamic changes afterwards will be ignored until the application is restarted.
13. Release Notes for MicroProfile Fault Tolerance 1.1
The following changes occurred in the 1.1 release, compared to 1.0
A full list of changes may be found on the MicroProfile Fault Tolerance 1.1 Milestone
13.1. API/SPI Changes
-
The
ExecutionContextinterface has been extended with agetFailuremethod that returns the execution failure(#224).
14. Release Notes for MicroProfile Fault Tolerance 2.0
This release is a major release of Fault Tolerance. The reason for increasing the release version to 2.0 is that this release upgrades its CDI dependency from CDI 1.2 to CDI 2.0, in order to use the new features introduced by CDI 2.0. Therefore, this specification is not compatible with Java EE7 but is compatible with Java EE8. Other than this, there are no backward incompatible changes introduced in this specification.
The following changes occurred in the 2.0 release, compared to 1.1.
A full list of changes may be found on the MicroProfile Fault Tolerance 2.0 Milestone
14.1. API/SPI Changes
-
Add support of the CompletionStage return type when annotated with @Asynchronous (#110).
14.3. Specification Changes
-
Clarify whether other Fault Tolerance functionalities will be triggered on an exceptional returned Future (#246).
-
Specify the sequence of MicroProfile Fault Tolerance annotations when used together (#291)
-
Clarify how the Fault Tolerance annotations interact with other application defined interceptors (#313)