############################################################################## ############################################################################## ### ### Running command: ### ### /home/biocbuild/bbs-3.20-bioc/R/bin/R CMD check --install=check:ChromSCape.install-out.txt --library=/home/biocbuild/bbs-3.20-bioc/R/site-library --timings ChromSCape_1.16.0.tar.gz ### ############################################################################## ############################################################################## * using log directory ‘/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/meat/ChromSCape.Rcheck’ * using R version 4.4.1 (2024-06-14) * using platform: x86_64-pc-linux-gnu * R was compiled by gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0 GNU Fortran (Ubuntu 13.2.0-23ubuntu4) 13.2.0 * running under: Ubuntu 24.04.1 LTS * using session charset: UTF-8 * checking for file ‘ChromSCape/DESCRIPTION’ ... OK * this is package ‘ChromSCape’ version ‘1.16.0’ * package encoding: UTF-8 * checking package namespace information ... OK * checking package dependencies ... OK * checking if this is a source package ... OK * checking if there is a namespace ... OK * checking for hidden files and directories ... NOTE Found the following hidden files and directories: .BBSoptions These were most likely included in error. See section ‘Package structure’ in the ‘Writing R Extensions’ manual. * checking for portable file names ... OK * checking for sufficient/correct file permissions ... OK * checking whether package ‘ChromSCape’ can be installed ... OK * used C++ compiler: ‘g++ (Ubuntu 13.2.0-23ubuntu4) 13.2.0’ * checking installed package size ... NOTE installed size is 5.6Mb sub-directories of 1Mb or more: data 1.5Mb www 2.1Mb * checking package directory ... OK * checking ‘build’ directory ... OK * checking DESCRIPTION meta-information ... OK * checking top-level files ... OK * checking for left-over files ... OK * checking index information ... OK * checking package subdirectories ... OK * checking code files for non-ASCII characters ... OK * checking R files for syntax errors ... OK * checking whether the package can be loaded ... OK * checking whether the package can be loaded with stated dependencies ... OK * checking whether the package can be unloaded cleanly ... OK * checking whether the namespace can be loaded with stated dependencies ... OK * checking whether the namespace can be unloaded cleanly ... OK * checking loading without being on the library search path ... OK * checking whether startup messages can be suppressed ... OK * checking dependencies in R code ... WARNING 'library' or 'require' call not declared from: ‘dplyr’ 'library' or 'require' call to ‘dplyr’ in package code. Please use :: or requireNamespace() instead. See section 'Suggested packages' in the 'Writing R Extensions' manual. * checking S3 generic/method consistency ... OK * checking replacement functions ... OK * checking foreign function calls ... OK * checking R code for possible problems ... NOTE bams_to_matrix_indexes: no visible binding for global variable ‘files_dir_list’ enrich_TF_ChEA3_genes: no visible binding for global variable ‘CheA3_TF_nTargets’ filter_correlated_cell_scExp: no visible binding for global variable ‘run_tsne’ generate_analysis: no visible global function definition for ‘head’ generate_analysis: no visible binding for global variable ‘k’ generate_analysis: no visible binding for global variable ‘clusterConsensus’ get_most_variable_cyto: no visible binding for global variable ‘cytoBand’ get_most_variable_cyto: no visible binding for global variable ‘Fri_cyto’ num_cell_after_QC_filt_scExp: no visible binding for global variable ‘sample_id’ num_cell_after_QC_filt_scExp: no visible binding for global variable ‘total_counts’ num_cell_scExp: no visible binding for global variable ‘sample_id’ num_cell_scExp: no visible binding for global variable ‘total_counts’ plot_correlation_PCA_scExp: no visible binding for global variable ‘Component’ plot_coverage_BigWig: no visible binding for global variable ‘molecule’ plot_coverage_BigWig: no visible binding for global variable ‘orientation’ plot_coverage_BigWig: no visible binding for global variable ‘Gene’ plot_gain_or_loss_barplots: no visible binding for global variable ‘Gain_or_Loss’ plot_gain_or_loss_barplots: no visible binding for global variable ‘ncells’ plot_gain_or_loss_barplots: no visible binding for global variable ‘cytoBand’ plot_most_contributing_features: no visible binding for global variable ‘genes’ plot_percent_active_feature_scExp: no visible binding for global variable ‘group’ plot_percent_active_feature_scExp: no visible binding for global variable ‘percent_active’ plot_pie_most_contributing_chr: no visible binding for global variable ‘absolute_value’ plot_reduced_dim_scExp: no visible binding for global variable ‘V1’ plot_reduced_dim_scExp: no visible binding for global variable ‘V2’ plot_reduced_dim_scExp: no visible binding for global variable ‘cluster’ plot_top_TF_scExp: no visible binding for global variable ‘TF’ rebin_helper: no visible binding for global variable ‘new_row’ rebin_helper: no visible binding for global variable ‘origin_value’ rebin_matrix: no visible binding for global variable ‘group’ subset_bam_call_peaks: no visible binding for global variable ‘merged_bam’ Undefined global functions or variables: CheA3_TF_nTargets Component Fri_cyto Gain_or_Loss Gene TF V1 V2 absolute_value cluster clusterConsensus cytoBand files_dir_list genes group head k merged_bam molecule ncells new_row orientation origin_value percent_active run_tsne sample_id total_counts Consider adding importFrom("utils", "head") to your NAMESPACE file. * checking Rd files ... NOTE prepare_Rd: raw_counts_to_sparse_matrix.Rd:6-8: Dropping empty section \source * checking Rd metadata ... OK * checking Rd cross-references ... OK * checking for missing documentation entries ... OK * checking for code/documentation mismatches ... WARNING Codoc mismatches from Rd file 'generate_analysis.Rd': generate_analysis Code: function(input_data_folder, analysis_name = "Analysis_1", output_directory = "./", input_data_type = c("scBED", "DenseMatrix", "SparseMatrix", "scBAM")[1], feature_count_on = c("bins", "genebody", "peaks")[1], feature_count_parameter = 50000, rebin_sparse_matrix = FALSE, ref_genome = c("hg38", "mm10")[1], run = c("filter", "CNA", "cluster", "consensus", "coverage", "DA", "GSA", "report")[c(1, 3, 5, 6, 7, 8)], min_reads_per_cell = 1000, max_quantile_read_per_cell = 99, n_top_features = 40000, norm_type = "CPM", subsample_n = NULL, exclude_regions = NULL, n_clust = NULL, corr_threshold = 99, percent_correlation = 1, maxK = 10, qval.th = 0.1, logFC.th = 1, enrichment_qval = 0.1, doBatchCorr = FALSE, batch_sels = NULL, control_samples_CNA = NULL, genes_to_plot = c("Krt8", "Krt5", "Tgfb1", "Foxq1", "Cdkn2b", "Cdkn2a", "chr7:15000000-20000000")) Docs: function(input_data_folder, analysis_name = "Analysis_1", output_directory = "./", input_data_type = c("scBED", "DenseMatrix", "SparseMatrix", "scBAM")[1], rebin_sparse_matrix = FALSE, feature_count_on = c("bins", "genebody", "peaks")[1], feature_count_parameter = 50000, ref_genome = c("hg38", "mm10")[1], run = c("filter", "CNA", "cluster", "consensus", "peak_call", "coverage", "DA", "GSA", "report")[c(1, 3, 6, 7, 8, 9)], min_reads_per_cell = 1000, max_quantile_read_per_cell = 99, n_top_features = 40000, norm_type = "CPM", subsample_n = NULL, exclude_regions = NULL, n_clust = NULL, corr_threshold = 99, percent_correlation = 1, maxK = 10, qval.th = 0.1, logFC.th = 1, enrichment_qval = 0.1, doBatchCorr = FALSE, batch_sels = NULL, control_samples_CNA = NULL, genes_to_plot = c("Krt8", "Krt5", "Tgfb1", "Foxq1", "Cdkn2b", "Cdkn2a", "chr7:15000000-20000000")) Mismatches in argument names: Position: 5 Code: feature_count_on Docs: rebin_sparse_matrix Position: 6 Code: feature_count_parameter Docs: feature_count_on Position: 7 Code: rebin_sparse_matrix Docs: feature_count_parameter Mismatches in argument default values: Name: 'run' Code: c("filter", "CNA", "cluster", "consensus", "coverage", "DA", "GSA", "report")[c(1, 3, 5, 6, 7, 8)] Docs: c("filter", "CNA", "cluster", "consensus", "peak_call", "coverage", "DA", "GSA", "report")[c(1, 3, 6, 7, 8, 9)] * checking Rd \usage sections ... WARNING Undocumented arguments in Rd file 'rebin_matrix.Rd' ‘rebin_function’ Functions with \usage entries need to have the appropriate \alias entries, and all their arguments documented. The \usage entries must correspond to syntactically valid R code. See chapter ‘Writing R documentation files’ in the ‘Writing R Extensions’ manual. * checking Rd contents ... OK * checking for unstated dependencies in examples ... OK * checking contents of ‘data’ directory ... OK * checking data for non-ASCII characters ... OK * checking data for ASCII and uncompressed saves ... OK * checking line endings in C/C++/Fortran sources/headers ... OK * checking compiled code ... NOTE Note: information on .o files is not available * checking files in ‘vignettes’ ... OK * checking examples ... OK Examples with CPU (user + system) or elapsed time > 5s user system elapsed plot_gain_or_loss_barplots 33.516 0.096 33.618 get_pathway_mat_scExp 23.198 1.661 24.864 plot_reduced_dim_scExp_CNA 17.099 0.035 17.137 calculate_CNA 16.337 0.469 16.845 calculate_gain_or_loss 15.793 0.133 16.602 calculate_cyto_mat 15.629 0.114 15.745 get_most_variable_cyto 15.701 0.002 15.728 calculate_logRatio_CNA 14.918 0.125 15.057 get_cyto_features 13.570 0.002 13.614 num_cell_after_cor_filt_scExp 10.454 0.002 10.435 filter_correlated_cell_scExp 10.053 0.004 10.063 preprocessing_filtering_and_reduction 7.915 0.128 8.036 CompareWilcox 5.793 0.730 6.119 rebin_matrix 6.414 0.006 17.924 import_scExp 6.301 0.023 6.328 create_scDataset_raw 5.658 0.366 6.033 * checking for unstated dependencies in ‘tests’ ... OK * checking tests ... Running ‘testthat.R’ OK * checking for unstated dependencies in vignettes ... OK * checking package vignettes ... OK * checking re-building of vignette outputs ... OK * checking PDF version of manual ... OK * DONE Status: 3 WARNINGs, 5 NOTEs See ‘/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/meat/ChromSCape.Rcheck/00check.log’ for details.