MultiDataSet 1.30.0
Recent advances in biotechnology are introducing new sources of biological information. As a result, developers need to create classes to properly storage and manage these new kinds of data.
MultiDataSet has methods to deal with three common datasets: gene expression, SNPs data, and DNA methylation. Gene expression from an ExpressionSet can be added to a MultiDataSet using add_genexp (for microarrays) or add_rnaseq (for RNAseq) functions. SNP data can be incorporated into a MultiDataSet by using the function add_snp. DNA methylation encapsulated in a MethylationSet object can be added into a MultiDataSet using add_methy. In addition, MultiDataSet is also able to work with any other class of objects based on eSet or SummarizedExperiment, two general classes of Bioconductor framework. Consequently, developers can implement methods to expand MultiDataSet to work with their own classes.
In this document, we show how to create a new method to add a new class of objects into MultiDataSet. This process is exemplified by creating a new class to store proteomic data. To this end, we will extend the eSet class. It should be noticed that the process would be very similar if the class was based on SummarizedExperiment.
The objective of this document is to illustrate how to create a method to add a new class of object to MultiDataSet. This tutorial is meant for software developers who have developed a new class to manage any new omic data or another type of information to be included in MultiDataSet objects.
Proteome data is commonly represented as a matrix of protein’s levels. This data has a special characteristic: some of the information cannot be measure due to the limit of detection (LOD) and limit of quantification (LOQ). Having LOD information in the data matrix can be crucial when performing statistical analyses. Considering proteins as the outcome requires using different statistical methods than those used for analyzing, for instance, gene expression data. LOD makes that proteins are left-censored variables making impossible the use of standard methods of analysis such as linear regression or t-test.
One approach that can be adopted to deal with this type of data is to assign LOD/2 to those values that are below LOD. This will allow the user to analyze protein data using standard packages such as limma, which uses linear models. However, this approach is biased. Other methods have been developed to properly analyze left-censored variables. Those methods require knowing the LOD of each protein. Therefore, having information about both protein’s levels and LOD is crucial for downstream analyses. Currently, a class that stores protein data with LOD does not exist. To solve this issue, we propose to create ProteomeSet, a new class based on eSet. Our new class will contain the raw protein levels, information about LOD and protein levels having data below LOD equal to LOD/2.
We will begin by defining the new class: ProteomeSet. Second, we will develop a function to load the protein data and the LOD into R and to create our ProteomeSet. Third, we will implement a method for MultiDataSet to add ProteomeSets. Finally, we will show the application of the code by creating a MultiDataSet with protein data.
We have chosen to extend eSet to implement our ProteomeSet because we can take profit of eSets’ methods and structure. Therefore, our ProteomeSet will also have the phenotype and feature data as well as methods to retrieve data. Given that eSet is defined in Biobase package, we should load it prior to the definition of ProteomeSet:
library(Biobase)
setClass (
Class = "ProteomeSet",
contains = "eSet",
prototype = prototype(new("VersionedBiobase",
versions = c(classVersion("eSet"), ProteomeSet = "1.0.0")))
)This ProteomeSet is defined as another eSet object. As previously mentioned, proteome data should contain some specific features. The setValidity function defines the requirements that an object must accomplish to be valid. assayData of ProteomeSet objects should have two slots to encapsulate both raw and modified data (e.g. values below LOD replaced by LOD/2). These slots will be called raw and prots, respectively. ProteomeSet should also contain information about LOD and LOQ. This data will be obtained from the columns LoD.T and LoD.B available as featureData. We can introduce these requirements with the following lines of code:
setValidity("ProteomeSet", function(object) {
## Check that object has the slots 'prots' and 'raw' in assayData
msg <- validMsg(NULL, assayDataValidMembers(assayData(object), c("prots", "raw")))
## Check that objects has the columns 'LoD.T' and 'LoD.B' in featureData
msg <- validMsg(msg, ifelse(any(!c("LoD.T", "LoD.B") %in% fvarLabels(object)), "fData must contain columns 'LoD.T' and 'LoD.B'", FALSE))
if (is.null(msg)){
TRUE
} else{
msg
}
}) In this subsection, we have covered the essentials of extending a class based on eSet. Readers interested in more advanced features can find more information about extending R classes and extending eSets.
Here, we create a function that loads proteome data from a text file, replaces values below LOD and above LOQ and returns a ProteomeSet with the available data. Correction of limit of detection is commonly defined as follows:
The function read_ldset will perform this task. It requires four arguments:
assayFile: (character) A path to the proteome’ measurements file.phenoFile: (character) A path to the samples’ phenotype file.featureFile: (character) A path to the features’ annotation file.sep: (character) Indicates the field separator character of the three files above.The three input files need to be TSV style (TSV: tab-separated file) and must include a header. assayFile and phenoFile must have a column called sample with a unique sample id. featureFile must have a column called feature with the unique feature id, that must be equal to assayFile’s columns names. Moreover, featureFile must have two columns called LoD.B and LoD.T, corresponding to the LOD (bottom limit of detection) and the LOQ (top limit of detection) of each protein.
read_lds checks that the features’ names are the same in assay data and in feature data. It also checks that feature data has the two columns for the limits of detection. After performing the two checks, read_ldset creates the matrix with the updated level of expression of each protein. Then a ProteomeSet is created, containing the raw matrix as raw and the updated matrix as prots. The phenotypic data and feature’s annotations are also included:
read_ldset <- function(assayFile, phenoFile, featureFile, sep="\t") {
## Load the threes files that will be used to create the ProteomeSet
adata <- read.delim(assayFile, sep=sep, header=TRUE, row.names="sample")
pdata <- read.delim(phenoFile, sep=sep, header=TRUE, row.names="sample")
fdata <- read.delim(featureFile, sep=sep, header=TRUE, row.names="feature")
## /
## Check that proteins in assay data are the same in feature data
if(!identical(colnames(adata), rownames(fdata))) {
stop("Features names in assay data (columns) are not equal to ",
"features names in feature data (rownames).")
}
##/
## Check that feature data include columns LoD.B and LoD.T
if(sum(c("LoD.T", "LoD.B") %in% colnames(fdata)) != 2) {
stop("Feature data must contain two columns labeled 'LoD.T' (top ",
"limit of dectection) and 'LoD.B (bottom limit of dectection)")
}
## /
## Perform the transformation of the protein level of expression
low <- fdata[colnames(adata), "LoD.B"]
up <- fdata[colnames(adata), "LoD.T"]
names(low) <- names(up) <- rownames(fdata)
faux <- function(x, low, up) {
x[x < low] <- as.double(low / 2)
x[x > up] <- as.double(up * 1.5)
x
}
tadata <- mapply(FUN = faux, x = as.list(adata), low = as.list(low), up = as.list(up))
dimnames(tadata) <- dimnames(adata)
## /
## Create the ExpressionSet with the two matrices
prot <- new("ProteomeSet",
assayData = assayDataNew("environment", prots = t(tadata), raw = t(adata)),
phenoData = AnnotatedDataFrame(pdata),
featureData = AnnotatedDataFrame(fdata)
)
## /
## Check that the new ProteomeSet is valid
validObject(prot)
## /
return(prot)
}So far, we have developed a function to define a new class of objects to encapsulate proteomic data. In this section, we will show how to add ProteomeSet objects to MultiDataSet. To do so, we will create a generic method for adding proteins (add_prot) to MultiDataSet and its implementation using add_eset.
The method add_prot for MultiDataSet will accept two arguments: a MultiDataSet and a ProteomeSet. Following S4 development rules, a new generic method for add_prot needs to be set:
setGeneric("add_prot", function(object, protSet, warnings = TRUE, ...)
standardGeneric("add_prot")
)## [1] "add_prot"In the definition of add_prot, we can see the three main arguments of this function. object is the MultiDataSet where we will add the ProteomeSet. protSet is the new ProteomeSet that will be added. Finally, warnings is a flag to indicate if warnings are displayed.
The following code shows the implementation of add_prot. In the signature, we specify that the first argument should be a MultiDataSet and the second a ProteomeSet. If any other class is passed to the function, an error will be returned. In the code of the function, we see only two lines: a call to add_eset and the return of the object.
library(MultiDataSet)
setMethod(
f = "add_prot",
signature = c("MultiDataSet", "ProteomeSet"),
definition = function(object, protSet, warnings = TRUE, ...) {
## Add given ProteomeSet as 'proteome'
object <- MultiDataSet::add_eset(object, protSet, dataset.type = "proteome", GRanges = NA, ...)
## /
return(object)
}
)Basic method add_eset is used to add eSet derived-classes to MultiDataSet and accepts several arguments. Four of them are used for implementing add_prot. As mentioned above, the first and the second are the MultiDataSet object where the proteins will be added and ProteomeSet with the proteins data. The third, dataset.type, is used to tag the type of omics data that add_prot is adding to the MultiDataSet. This argument is set to "proteome" in add_prot, "expression" in add_genexp and "snps" in add_snps. The fourth argument, GRanges is set to NA. This argument can take two type of values: a GRanges object with the equivalent content of the fData included into the ExpressionSet or NA in case no genomic coordinates are available for the set’s features. In this case, since we are working with proteins, no genomic coordinates are given.
For illustration purposes, we have created three tsv-dummy files that are used in the following code to create a ProteomeSet using read_ldset function. These files are available in the Supplementary Material of the manuscript
## Create a ProteomeSet with protein data
ps <- read_ldset(assayFile="assay_data.tsv",
phenoFile="pheno_data.tsv",
featureFile="feature_data.tsv"
)
ps## ProteomeSet (storageMode: environment)
## assayData: 5 features, 33 samples
## element names: prots, raw
## protocolData: none
## phenoData
## sampleNames: sp001 sp002 ... sp035 (33 total)
## varLabels: gender plate kit
## varMetadata: labelDescription
## featureData
## featureNames: Adiponectin CRP ... APO.E (5 total)
## fvarLabels: LoD.T LoD.B unit
## fvarMetadata: labelDescription
## experimentData: use 'experimentData(object)'
## Annotation:The created object ps is a ProteomeSet and it contains two elements called prots and raw. Moreover, ps’s feature data contains two columns called LoD.B and LoD.T.
Now that the proteome data is loaded and stored in a ProteomeSet, we can add it to a new MultiDataSet. MultiDataSet objects can be created using the constructor createMultiDataSet. Then the method add_prot is used to include the proteome data to md:
md <- createMultiDataSet()
md <- add_prot(md, ps)The method names of MultiDataSet shows the datasets stored in the MultiDataSet. MultiDataSet stores datasets calling them by its data type.
names(md)## [1] "proteome"Finally, the show of the object gives more information related to the stored in the MultiDataSet:
md## Object of class 'MultiDataSet'
## . assayData: 1 elements
## . proteome: 5 features, 33 samples
## . featureData:
## . proteome: 5 rows, 3 cols (LoD.T, ..., LoD.B)
## . rowRanges:
## . proteome: NO
## . phenoData:
## . proteome: 33 samples, 4 cols (gender, ..., kit)The name of the set is shown (proteome), the number of proteins (5 rows in feature data), the number of samples (33 samples in pheno data) and, since no GRanges was provided, rowRanges is NO.